Timestamps Close look at the kit: 1:37 Installation begins: 8:14 Finished product and build overview: 10:08 Size comparisons: 15:31 First run: 17:20 Course runs: 18:49 Final thoughts: 26:06
This frame is my main car. By far the best performing car that I own. I actually modified the frame and sent it off for sls sintering (it's like 3d printing). My motor had started to deform my frame from the heat, so I needed some better material. I also designed a custom servo tray that has a little open ring on the back of it that I run a limiting rope through, it still allows all of the flex, but the front basically does not lift. I also designed the back a bit differently so I could put the battery on top of the plastic, instead of below. I designed that part of it with a magnetic battery cover that tapers down to the back. Finally, I mounted the front shocks to the inside, as I wanted to keep my turning radius, without an extremely wide front end. It's a beast. (Brushless motor from moforc)
I’ve print myself one of these STL that I buy on cult 3-D. Oh man, this chassis is awesome and it keeps people looking at it. This is the greatest ever . Fun fact I love it so much that I leave it on the dash of my car. One day the entire print was heated by the sun and the gravity just bend the plastic. I thought I need to print a new one but you know what it works perfectly it just droped more by the heat. I love it even better. I don’t think you can go lower than that. It was a you successful unpredicted events. Thank you for the great video. I like the quality of what you were doing.
I just got my warthog chassis and i love it! Im Running the lizard pro with a mofo rc nano beast and that fits a bit better. Also brass axles and weights so it climbs so good! Thanks for this vid that made me buy it!!
Sorry, I am going to have to unsubscribe....my bank account can't keep up with all of your amazing builds. It's like Pokemon go. Gotta catch em all! Lol. I am joking, btw....lol
Apologies. I have not liked enough of your videos. I was in a full blown Cape Crawlers marathon while manning my desk. Loved this video. Would love to see a build list. But no worries. Your explanations are great and your builds awe inspiring to me . Please keep up the great work. Much Respect.
Been running tenth scale for years now. Just breaking into 1:24 and after watching your video i ordered a fms K5. Be seeing you around and thanks for your videos!
Also, if you find your wheels rubbing on the front shock, if you cut the fake reservoir off of a stock shock, you can squeeze the shock on the inside of the frame rail, thus giving you more wheel clearance. I had +4 axles and mud slingers on old treal wheels and this is what I had to do to get full turning radius. Just my experience, hope this info is useful. 😊
I will say this thing seems to be the ultimate vertical climber but I feel that on the rocks and over less steep inclines the comp build you made will probably be better. Unfortunately I now know what I’m putting in my birthday list great video.
Glad I found this video/build/channel! I'm thinking about a build just like this. 2 Questions: What would you change on this build now? I think that low cog is awesome, but I might use the taller tires from your ultra 24 build. Second, your off-road course!! Got any videos on THAT?
Sure thing. The kit was $35, links were $10. Furitek setup was ~$180. Servo was $60. Wheels and tires were $50. Axles, diff covers, hexes were another $60ish. The rest came from a donor rig
Loving this ... Epic performance. Can you leave a list of components and links to all the parts please? I may want to go for different shocks in metal so any help on this would be appreciated. I'm in the UK and I don't think we have the same level of product available to us as you guys in the State's.
Glad you enjoyed it! I put some of the links in the description. Beyond that list you'll need the JLU links and driveshafts, skid plate, electronics, axles/housings, shocks, motor, transmission. Most of that can be sourced from a donor rig.
I love the look of this chassis so I had to get one but I have an ax24 which turn out to be quite a different beast, it's gonna take some time but I'll get it. I would add a picture but can't figure out how.
I knew I should’ve skipped over instead of stopping and watching 😁😁 just kidding, that is super cool. Just got done working on my trail hunter, I put just the brass rings in the front rims, brass hexes all four corners. I weighed each one the two heaviest in the front, The rings and the hexes because they don’t all four weigh the same, And the to heaviest upfront the heaviest out of those two I put on the driver side front next heaviest passenger side The weight by us stock front 54 and the rear 46, now with the brass rings and hexes front 59 and the rear 41 now to test
Really do like that stellar transmission but I also did find that RC four-wheel-drive has the same one with a 35 turn brushed motor that you can pull off and put the surpass motor brushless on works awesome same thing little cheeper
Hey man I love the video and your channel. Is there anyway you could do an overview of your outdoor course I lived the indoor one but would love a video on the rocks
I was going to get that kit but he is charging 14 dollars for shipping which is excessive for a few ounces of parts im just going to print my own but thanks for the great reviews.
I have a blue one of these and the one thing I would put on this to improve it like I did mine is 3flow9rc steering link and diff cover skid. It's so low these unique products really help it flow like water over the rocks. I got the injora comp pins on it and they sit higher than the roof.
Im a follower, love your channel, very new to the mini crawlers, spent many a late night watching your vids. Might be a silly question, but what SCX24 did you start with as a base for this build? or does it not matter? Cheers Jeff
Damn I think I got In over my head here I was excited for trying to build this but now I’m wondering if I will actually be able to make it work. Lol this is going to be my first attempt at building and damn I didn’t realize how much you had to do to make it fit right.
I haven't heard about any aftermarket chassis kits for this unfortunately. That's not to say it isn't being developed though. I feel like the demand for parts for the AX isn't up there with the SCX or the TRX4M, so we'll see what companies develop.
Great video! Not at all a fan of these bodyless frames. (I am really into the paintjob and bodywork part). I get why people are stoked on these builds though. The performance is spectacular :)
Finally!!!! Hahah hey what's the length on the chassis mine will be here tomorrow soooo pumped....yours came out awesome a green and black one is on my list for sure..
@@CapeCrawlers I agree, you would need a long narrow body I would assume. I just think would look very detailed and also keep most of the better crawling ability.
@@CapeCrawlers I just had the most incredible time trying to seat a DJ Crawler tire on a INJORA chrome wheel. Took several try’s but I never gave up lol - hmmm I am staying away from the chrome for now
salut je suis en France et je suis entrain de monter le mien et tout s assemble sans problème et il est juste trop beau avec son design hors du commun je l adore déjà merci pour vos vidéos elles sont terribles 👍👍
While i have started to print this (the seller is offering the files for a small amount) - i was wondering about links, of course i can experiment - would like to hear your opinion about the advantage of the provided links compared to a normal set of low clearance links. Also i have here a stock"ish" deadbolt i might want o convert with this chassis (to avoid buying a fifth scx24) - that would be deadbolt rear and c10 front links - but maybe this will mess up the balance of this chassis that seems to use C10 rear lenght links on front and rear. (Not expecting an answer, just contemplating). Also worrying about big tires touching the shocks or chassis - i dont want to invest into parts to go real wide...
I think a normal set of links may pivot better. The provided ones felt a little tight. My favorite wheel base is the combo you mentioned: deadbolt rear, c10 front, but I don't know what that would look/perform like on this chassis. Some folks have mentioned mounting the shocks on the inside of the chassis to mitigate rubbing. Also cutting off the fake reservoir of the stock shocks for more clearance.
This is awesome and you did great but maybe pull all those pins off and hardwire it. Might save some space.. no need for that huge plug. IDK.. I;m dumb.
Do the holes in the chassis come pre-tapped with threads? And if not do you have a tap set that you have to tap the threads out yourself? or can you just throw a nut on the back of it?
My only hesitation is about the height of the SMP setup. That mount is really tall. I would have to look at them side by side to tell for sure but it would be close.
Really been thinking about doing a black and orange build with the chassis and have the smp as the center piece. Maybe just trimming out some of the top cover would work?
You would have to find the supporting hardware like mounting plates, electronics, pinion gear, etc. I haven’t seen a komodo motor in many 1/18 scales. It’s mostly the micro komodo
I was going to buy one of these but postage to the UK is double the price of the kit and that's not including the tax,as nice as it is it's just not worth it for me
Timestamps
Close look at the kit: 1:37
Installation begins: 8:14
Finished product and build overview: 10:08
Size comparisons: 15:31
First run: 17:20
Course runs: 18:49
Final thoughts: 26:06
Sent you a pm on Instagram about a product let me know what you think.
What about 4ws on this beast?
Dose it fit with a eco power servo?
I was on the edge of my seat watching this review, glad you are enjoying your Warthog! Thank you so much for the support Adam!
Thank you for the opportunity to try this amazing piece of hardware. You make stellar products!!
You deserve a billion sales. Your frame is, by far, the best performer that I own.
This frame is my main car. By far the best performing car that I own. I actually modified the frame and sent it off for sls sintering (it's like 3d printing). My motor had started to deform my frame from the heat, so I needed some better material. I also designed a custom servo tray that has a little open ring on the back of it that I run a limiting rope through, it still allows all of the flex, but the front basically does not lift. I also designed the back a bit differently so I could put the battery on top of the plastic, instead of below. I designed that part of it with a magnetic battery cover that tapers down to the back. Finally, I mounted the front shocks to the inside, as I wanted to keep my turning radius, without an extremely wide front end. It's a beast. (Brushless motor from moforc)
Your build sounds amazing! Great concepts and ideas!
I’ve print myself one of these STL that I buy on cult 3-D. Oh man, this chassis is awesome and it keeps people looking at it. This is the greatest ever . Fun fact I love it so much that I leave it on the dash of my car. One day the entire print was heated by the sun and the gravity just bend the plastic. I thought I need to print a new one but you know what it works perfectly it just droped more by the heat. I love it even better. I don’t think you can go lower than that. It was a you successful unpredicted events. Thank you for the great video. I like the quality of what you were doing.
I just got my warthog chassis and i love it! Im Running the lizard pro with a mofo rc nano beast and that fits a bit better. Also brass axles and weights so it climbs so good!
Thanks for this vid that made me buy it!!
I’m thinking of running like the nano bam or something in mine man any advice
Sorry, I am going to have to unsubscribe....my bank account can't keep up with all of your amazing builds. It's like Pokemon go. Gotta catch em all! Lol. I am joking, btw....lol
LOL my heart sank when I first saw your comment! Brace yourself, we are just beginning. I've got some amazing stuff coming!
Apologies. I have not liked enough of your videos. I was in a full blown Cape Crawlers marathon while manning my desk. Loved this video. Would love to see a build list. But no worries. Your explanations are great and your builds awe inspiring to me . Please keep up the great work. Much Respect.
Thank you, much appreciated!
LETS GOOOOOOOOOO!!!!!!!!!!!! CAPE CRAWLERS WITH ANOTHER BANGERRRR!!!
Thank you!!
Beautiful build my friend, another very capable and epic rig. Awesome video Adam 👍😁
Thank you!
Loved this video! Sad to see that work mat isn’t used very often, since it’s so cool!
Been running tenth scale for years now. Just breaking into 1:24 and after watching your video i ordered a fms K5. Be seeing you around and thanks for your videos!
Awesome, have fun!
Love the simplicity, stock shocks without springs, nothing too fancy (well apart from the motor) compared to others and performs like that.
I agree. It's function over all else. Very fun project!
I am really enjoying my Warthog, but now I want that Furitek Motor ESC combo real bad. Nice review I enjoyed watching this.
Glad you enjoyed it! I love the warthog. It's one of my favorite builds for sure.
That has to be the best 24th scale crawler I've ever seen. Great job Adam. Um now where is my scx 24...
Thank you, I appreciate that!
Also, if you find your wheels rubbing on the front shock, if you cut the fake reservoir off of a stock shock, you can squeeze the shock on the inside of the frame rail, thus giving you more wheel clearance. I had +4 axles and mud slingers on old treal wheels and this is what I had to do to get full turning radius. Just my experience, hope this info is useful. 😊
Great tips! Mine rubs just slightly but doesn't bind. If I switch to bigger tires I will definitely have to do one of these things.
@@CapeCrawlers Axle extensions also do the trick! Kyle’s method also helps if using stock width!
Would be interesting in seeing what the weight bias is on some of these amazing builds. Love your videos, keep up the great work!
Thank you! I am going to get a 4-point scale very soon. It will be great for tuning and perfecting these things.
Really cool
What a nice build! I honestly thought you had replaced the bronco body with this, but I’m happy that the red bronco lives on!
Can't get rid of my red hard body!
Glad I'm not the only one riding without the body on!
I like it with the bare chassis!
I’ve made one as custom. Brushed with ASX24 , the battery in front from Motor and 4WS. it was nice
I will say this thing seems to be the ultimate vertical climber but I feel that on the rocks and over less steep inclines the comp build you made will probably be better. Unfortunately I now know what I’m putting in my birthday list great video.
Thanks for watching! I think you're right. The angled skid of the comp build and bigger tires give it the advantage there.
THAT IS A COOL BUILD, NICE JOB
Glad I found this video/build/channel! I'm thinking about a build just like this. 2 Questions: What would you change on this build now? I think that low cog is awesome, but I might use the taller tires from your ultra 24 build. Second, your off-road course!! Got any videos on THAT?
Hi Adam, I love the Warthog but can you please give the rundown of your total cost for this build?
Sure thing. The kit was $35, links were $10. Furitek setup was ~$180. Servo was $60. Wheels and tires were $50. Axles, diff covers, hexes were another $60ish. The rest came from a donor rig
Loving this ... Epic performance. Can you leave a list of components and links to all the parts please? I may want to go for different shocks in metal so any help on this would be appreciated. I'm in the UK and I don't think we have the same level of product available to us as you guys in the State's.
Glad you enjoyed it! I put some of the links in the description. Beyond that list you'll need the JLU links and driveshafts, skid plate, electronics, axles/housings, shocks, motor, transmission. Most of that can be sourced from a donor rig.
Just got my chassis an couldn’t wait so I just chopped the rear gladiator driveshaft
The Caped Crawler strikes again,,,,thanks for sharing
Haha! Thanks for watching!
Wtf.. this is such a cool frickin build... Damnnnnnnn.. there goes my bonus
LOL it's a monster!
You could still mount a body to it if you wanted. I think that would look very cool
I'll think about it. I like the raw look of it as is, but it would be fun to have some options.
Thanks man I love your content so much that is an awesome build!! So cool!!
Thank you, glad you enjoyed it!
I love the look of this chassis so I had to get one but I have an ax24 which turn out to be quite a different beast, it's gonna take some time but I'll get it.
I would add a picture but can't figure out how.
The song you play over the actual build is the same song that DipYourCar uses when they mix their paint
Looks so mean sitting there love it
Like your Iron Maiden cape crawlers logo!!!
Love that metal font!!
I knew I should’ve skipped over instead of stopping and watching 😁😁 just kidding, that is super cool. Just got done working on my trail hunter, I put just the brass rings in the front rims, brass hexes all four corners. I weighed each one the two heaviest in the front, The rings and the hexes because they don’t all four weigh the same, And the to heaviest upfront the heaviest out of those two I put on the driver side front next heaviest passenger side The weight by us stock front 54 and the rear 46, now with the brass rings and hexes front 59 and the rear 41 now to test
Awesome! I just got our T-hunter fixed this evening. I'm excited to start working on it.
Might be something for me to look into, in the future, as this looks very interesting.
It's a great setup!
@@CapeCrawlers for sure!
Oh wow. I’m ordering one now. What’s the weight distribution like on the scales ?
HELL YEAHH!! WHAT A BEAUTY 😭😘
Thanks for watching!
@@CapeCrawlers no thank you for making such a cool series!!
That song around the 9:30 mark, What is it! Love those wheels. LGRP?
it is Old Sneakers by Reborn. Yes, LGRP cyclone wheels.
Really do like that stellar transmission but I also did find that RC four-wheel-drive has the same one with a 35 turn brushed motor that you can pull off and put the surpass motor brushless on works awesome same thing little cheeper
Good info! I will have to look into that combo.
What a super build!
What's up man? You think this could work with fcx24?
I don’t think it would. I know Shane is working on a 1/18 design and I think that could work on the fcx24
@Cape Crawlers preciate it, I'll keep my eye out for it. Love the content, keep it up bro 🤙🤙
*Looks interesting 🤔 wound how it would handle our terrain being so low. Great channel dude
I should visit and find out!
Hey man I love the video and your channel. Is there anyway you could do an overview of your outdoor course I lived the indoor one but would love a video on the rocks
I made one a while back: ua-cam.com/video/_1-SAGUkQQk/v-deo.html
It’s outdated now so I could do a refresh
@@CapeCrawlers thanks for the reply! If u do make a refresh I would watch but no pressure
Can you make a video covering how to build a 6 wheel drive scx24?
I was going to get that kit but he is charging 14 dollars for shipping which is excessive for a few ounces of parts im just going to print my own but thanks for the great reviews.
Do you ever sell any of your builds
What song is it around 9:30, I love it ❤
Old sneakers by Reborn
That was outstanding
That was impressive I like those tires
I have a blue one of these and the one thing I would put on this to improve it like I did mine is 3flow9rc steering link and diff cover skid. It's so low these unique products really help it flow like water over the rocks. I got the injora comp pins on it and they sit higher than the roof.
I'll check those skids out! It must look insane with the comp pins on it!
love the warthog color withe the wheels
Thanks! I'm super happy with the combo.
Should do rear steer on that rig ..
Possibly in the future! I am going to try portals next.
I just ordered one of these can you use parts from an extra s e x for the whole build and slowly change out parts as you go
Im a follower, love your channel, very new to the mini crawlers, spent many a late night watching your vids. Might be a silly question, but what SCX24 did you start with as a base for this build? or does it not matter? Cheers Jeff
Hi Jeff! It's loosely based off of a JLU or C10. That's what Shane (the creator) recommends.
@@CapeCrawlers awesome! thanks for the fast reply! all the best
You should try out the hot racing oil filled shocks they make stock length ones and they are AWSOME
Oh man, those would be great on this. I'll check them out.
Odd question. Do you build these and sell them. I know you don’t sell the chassis.
Man I need these mini swamp kings baaaaddddd when are they suppose to come out ?
2-3 weeks I believe. They're excellent tires!
@@CapeCrawlers can’t wait to put them on my Toyota the trail kings are just a little to big and it doesn’t turn well
@@CapeCrawlers I need them on my Toyota the trail kings are to big and it doesn’t turn well. Can’t wait. The mt proline bajas will have to do for now
I'm trying to attach this frame to the basher racksta MOA, with a few modifications. Its became a machined gecko
That sounds awesome!
Damn I think I got In over my head here I was excited for trying to build this but now I’m wondering if I will actually be able to make it work. Lol this is going to be my first attempt at building and damn I didn’t realize how much you had to do to make it fit right.
Also what diff size would I get to try and make this build?
You can do it. Just take your time and chunk it down into sections. The axles and diffs are the same as a stock SCX24.
Your rails were backwards in the beauty shots of the chassis. Lol. Nice kit tho clean print.
It came assembled so I can't take credit for that lol
Yeah that was impressive climbed right up that no problem
Any idea on when companies might start coming out with replacement chassis for the ax24? Seems like a no brainer since it comes with 4ws stock
I haven't heard about any aftermarket chassis kits for this unfortunately. That's not to say it isn't being developed though. I feel like the demand for parts for the AX isn't up there with the SCX or the TRX4M, so we'll see what companies develop.
I'm hoping the brushless motor pieces come With it cause I couldn't find them
They do. They all come in one package together.
Wow looks bad to the bone 👍👍 Love the color choice looks mean and ready
Out of stock ..mission accomplished 🙌
Shane better fire up his printer!
@@CapeCrawlers ya buddy
Great video! Not at all a fan of these bodyless frames. (I am really into the paintjob and bodywork part). I get why people are stoked on these builds though. The performance is spectacular :)
Thank you! I prefer that style too, but it's fun to mix it up. This thing has character all its own for sure.
Very cool chassis
nice build, i really need to get the 3d printer going again
you see treal has 18g knuckles
Thanks! Yes, I have the big Treal knuckles on some other builds. They wont fit with the big brass hexes, so I had to choose one or the other.
You have the NSDRC servos correct
Yes, that's right.
@@CapeCrawlers how do you like them compared to reefs 99 micro
Iv got the warthog blk. Thinking of using my C10 build. What do you think
C10 would be a perfect base
Finally!!!! Hahah hey what's the length on the chassis mine will be here tomorrow soooo pumped....yours came out awesome a green and black one is on my list for sure..
Thanks! I will check on the length. I don't have the measurements on hand
@@CapeCrawlers kool..hey check out the lcg hot racing chassis it's carbon fiber similar ride height of the warthog
You should play Iron Maiden during the fast forward😂
Thoughts on a diecast aluminium body on this chassis?
I would be hesitant to do so and jeopardize the LCG benefits of this thing. But if you could do it and keep it mounted real low, it would be awesome.
@@CapeCrawlers I agree, you would need a long narrow body I would assume. I just think would look very detailed and also keep most of the better crawling ability.
When are the tires coming out?
Another 4-5 weeks I believe.
@@CapeCrawlers I just had the most incredible time trying to seat a DJ Crawler tire on a INJORA chrome wheel. Took several try’s but I never gave up lol - hmmm I am staying away from the chrome for now
Could I just transfer the links from the axial to this or would I need to use the printed ones have something I thought of for this
I wonder how my AX24 will work with that chassis.
I've seen some 4WS warthogs and they were awesome!
salut
je suis en France et je suis entrain de monter le mien et tout s assemble sans problème et il est juste trop beau avec son design hors du commun
je l adore déjà
merci pour vos vidéos elles sont terribles 👍👍
Awesome! Have fun and thank you so much!
Have you checked out KILLR CHASSIS?
I've looked at them yes. They are gorgeous and look like they would perform amazing.
Yup never?seen a motor that turns on the outside l8ke that can i get it 4 my K5 BLAZER ?
I was wondering what is your top 3 favorite 1.0 crawler tires?
1: LGRP swamp kings
2: Proline hyrax
3: RC4WD scrambler
Do you know were i can get some proline swampers out of stock everywere
Everything looks back ordered right now. ETA for next shipment is in Feb, so I would hope any day now.
@@CapeCrawlers i have a set of those already on order but im trying to find the 1.0 as well
Would those tires grip better mounted in reverse?
Possibly. I haven't tried. I dont know if my OCD would allow that lol
Love the videos. Good 💩
While i have started to print this (the seller is offering the files for a small amount) - i was wondering about links, of course i can experiment - would like to hear your opinion about the advantage of the provided links compared to a normal set of low clearance links. Also i have here a stock"ish" deadbolt i might want o convert with this chassis (to avoid buying a fifth scx24) - that would be deadbolt rear and c10 front links - but maybe this will mess up the balance of this chassis that seems to use C10 rear lenght links on front and rear. (Not expecting an answer, just contemplating). Also worrying about big tires touching the shocks or chassis - i dont want to invest into parts to go real wide...
I think a normal set of links may pivot better. The provided ones felt a little tight. My favorite wheel base is the combo you mentioned: deadbolt rear, c10 front, but I don't know what that would look/perform like on this chassis. Some folks have mentioned mounting the shocks on the inside of the chassis to mitigate rubbing. Also cutting off the fake reservoir of the stock shocks for more clearance.
How much does something like this cost? Like the full build?
This would have been ~$250 I think
Hey brother sooo jlu rear links front and rear would give the look you have I have some injora sets I can piece together?
That should do it
@@CapeCrawlers kewl
This is awesome and you did great but maybe pull all those pins off and hardwire it. Might save some space.. no need for that huge plug. IDK.. I;m dumb.
Do the holes in the chassis come pre-tapped with threads? And if not do you have a tap set that you have to tap the threads out yourself? or can you just throw a nut on the back of it?
Yes they did. Some were a little rough but I didn’t have to tap anything
Sorry I skipped ahead to the run footage. Are those baby swamp kings?
yes. (12:45 for more deatil) ;)
@@lostinature thanks.
Awesome, should head to head all the rigs, this things crazy small, should’ve compared it to the UBT18 it would a have been a ant compared to ut
It would completely hide away under the UTB18. That would have been a crazy comparison
Do you think it would fit an smp motor and mount?
My only hesitation is about the height of the SMP setup. That mount is really tall. I would have to look at them side by side to tell for sure but it would be close.
Really been thinking about doing a black and orange build with the chassis and have the smp as the center piece. Maybe just trimming out some of the top cover would work?
What is the link to buy the warthog chassis?
Here you go: www.etsy.com/listing/1029597492/scx24-warthog-chassis
Thank you so much I’m a huge fan
🔥🔥🔥
Do you think a mofo smp would fit in that chassis
I think it will. The overall height of that motor is similar to the Komodo, so I think it would work.
@@CapeCrawlers thank you so much for the reply I appreciate it Bigtime 🤟🏻🤟🏻
Do you have issues with the brass Mofo portals binding and disengaging. I am having all sorts of issues with this.
I did on my deadbolt pretty severely but they've been pretty solid on the warthog thus far
Can I use this motor in a 1/18 crawler?
You would have to find the supporting hardware like mounting plates, electronics, pinion gear, etc. I haven’t seen a komodo motor in many 1/18 scales. It’s mostly the micro komodo
What tires are on this thing
Will this fit the ax24?
Yeah
Love that look! Super sick….🤘🤓
Thanks! I'm pumped with how it turned out.
I was going to buy one of these but postage to the UK is double the price of the kit and that's not including the tax,as nice as it is it's just not worth it for me
Thats a bummer