This is by far the best video on this particular lathe I have seen on UA-cam. It solidified my decision to purchase one. I am an amateur to metal lathes but have 2 good friends that have operated them at a professional level. Thank you for posting this great video. It is extremely informative and I look forward to seeing some more videos with milling being done.
I watched this video to get more information on this particular lathe. Then I checked out the Maker Barn on Google. Then I discovered the Maker Space and discovered there is one near me. I went to check it out and it turns out they have the same Grizzly lathe as well as a bunch of other equipment. I am becoming a member because it is a heck of a deal to get use of that equipment for a bargain price - as well as the community it supports. It is AWESOME!
Thanks for the safety message. always figured "no long sleeves" but I used gloves once and paid the price - almost tore my arm off. Yet I see guys doing it all the time on these videos. Again - THANKS!!!
I’ll share a recent experience with my G4003 gunsmith lathe. It recently locked up on me while in use. We trouble shot the issue and found that the input shaft on the quick change gearbox locked up and also sheared the key on the 16/32 tooth combination gear. Ultimately the problem was caused by inadequate lubrication, which i routinely do on this and all machines. The problem is that if you think a squirt or two of oil in the tagged oil holes on the gearbox itself are enough, it just isn’t true. Those holes lead to a tray that is cast into the top of the gearbox housing. Inside this tray are additional lube holes that eventually make their way downward to the rotating gears and shafts inside the gearbox. Blah, blah, blah, but the moral of the story is when lubricating your machine, squirt at least 2 to 3 ounces of lube in this section of the machine to fill that tray. If you don’t see any dripping from the selector shafts into the chip pan, you likely don’t have enough oil in there. Good luck
Thanks for sharing what can and does happen when someone is "grabbed" by moving machinery. Several years ago I took a machine shop class at a community college. The teacher cautioned us to never do dumb stuff, much the same list you covered. He told of an incident that happened some time before then in which a fellow with long hair was a student and the inevitable happened. His hair was caught in the spinning chuck and he was scalped immediately. The teacher didn't say - and we didn't ask - whether the student survived or not, something best left to the imagination. That single incident was why they added shutdown stations, located about every 20' along all the walls to kill the entire shop machinery. Although Murphy has probably been gone for quite a while, he still rules when it comes to chance.
The lathe has been doing well, no complaints. The only thing I miss is that the feed lever uses positive engagement rather than a clutch. I think this is normal in the small import lathes. The larger import lathes do use clutches to control feeds.
Nice looking lathe & especially nice looking DRO. Thanks for your comments on my video. I now have the radius/diameter working correctly using the 1/2 button instead of changing the resolution. I also mimicked the font & yellow color of the axis button and made Z button covers for the axis labeled Y - just more of my OCD kicking in. 😀 Enjoy your lathe!
I was shop Forman at a company that had this same exact lathe, i used it extensively, they are very good and tight machines and I’m looking to get one for my home shop!
I have never seen anyone who would be so stubbornly knit with his hands around the lathe and even lean on it my professor was almost like behaving and spent one school year for occupational safety, nobody learned to use any tools if safety is the first, nothing can be done because it is always too dangerous and does not earn even for a snack security is always, always, and it is necessary to learn it in practice so do not lean on any machines ever with this exception nice presentation thank you
We went a bit overboard in our shop. Our Chuck boards came right up underneath chucks so that noobs really would have to go out of their way to drop a Chuck.
I have seen the caliper solution which is fine but many DROs offer the third function for very little extra putting all the info at one spot. Possibly could be used at the taper attachment. Just haven't seen it done and am curious if there are any serious obstacles to my doing it on the G4003G. Take care. Doug
I have had the G4003G which is a very similar model for several years now and am thinking of installing a DRO (I have that same model on my mill). So it would be helpful to see exactly where and how you installed the scales for yours as well as the sizes (metric) necessary. I am also wondering if a three axis DRO could be used to measure the quill travel on the tailstock as well? It would also be good to see you fine tune the compound and cross slide friction on the handwheels. Mine seem to loosen up a tad fairly quickly to where they may move a thou or two while machining if not held. Good subject matter for those of us who own that lathe. Take care. Doug
Hello , I have same lathe g4003 and I want to update with quick change tool and wich series you have it’s 100 or 200 series? And witch tool bit you use 1/2 (12mm) or 3/8(10mm) or smaller? Thank you
There are a significant number of experienced lathe owners who believe it is a mistake to store tools in a place where you need to reach across the lathe to get them. Of course you would normally only reach across when the lathe is stopped but the temptation may be to reach across when it is running and that is an opportunity for disaster.
Thanks for sharing this information. I'm buying a lathe like the one in the video and I have almost no experience. I'm super concerned about the safety, and what you have shared is exactly the kind of thing I was looking for. I won't place the tools there. thanks
@@Doppiovetro There are two kinds of people who store stuff behind their lathe. Those who have reached across their lathe while it is running and those who will. It is really easy to become focused on your routine, then something happens that knocks you off your routine and you do something stupid that you wouldn’t normally do. Your lathe doesn’t care that you forgot.
If you aren't careful accidents will happen. I will continue to wear long sleeves as would anyone who has had hot chips burn their forearms. I will go with safety for what will happen as opposed to what could happen. I also wear both a pair of glasses and a face shield. Chips go everywhere especially where they most damaging. Take care. Doug
Great video. Thanks. I have the same lathe and it's about 5 years old. I'm having a motor problem and I'm going to have to pull the motor off to figure out the issue. It's stuttering going into reverse and a little bit in forward. I've checked everything and it's definitely the motor. It's either the capacitors or centrifugal switch. Also could be a winding. Have you ever had an issue like that with yours or one like it?
Not with the 4003, but a Grizzly planer has gone through a couple of start caps. There is probably a start cap and a run cap. The run cap is the smaller value. The start cap may have blown its seal.
@@rustbeltmachine Other starting issue possibilities include a faulty contactor in the panel (BTDT) or F/R switch on the control rod under the lower front corner of the headstock. (BTDT) btw, my 12x36 is a HFT and decades old. Most Grizzly parts work just fine when/as needed, esp the two electrical bits I replaced. IMO it says much about the design that it hasn't needed to be changed or upgraded. Make chips, Boys! 😁
I've had nothing but issues from one of their products. My wife and I drove over 5 hours, and spent over $1200 at the Grizzly showroom in Missouri. Honestly the showroom is amazing. The product I got...not so much. I've had over 10 separate issues including defective, and back ordered parts sent to me. Grizzly did offer me $100 to keep the pos 😂😂😂. I like high quality tools, and won't hesitate to spend the money on them. SCM, felder, festool, saw stop etc. I like decent hand tools such as snap on, Milwaukee, dewalt, and I even think husky is decent due to being able to swap tools easily when they break one the job. We even have some harbor freight tools that I think are very very good. My experience with grizzly has been unsatisfactory at best. Not to mention they will not post my review on their actual website. Hopefully my review will help someone looking for equipment.
I would really like to see in one of these lathe videos some one really make something. Not O here is another how to cut threads on a lathe. Made by someone who had only tried to cut threads about 3 times.. How about a shaft for a ball valve for a nuclear submarine. That might be interesting.....
Could you do a short video sometime showing the construction of the shelf, how its attached and such? I also like the light attached to it with the bent conduit.
@@makerspace533 All a matter of what you're willing to spend and how much time you want to spend rebuilding a worn out machine vs making parts. At the price point of this machine you will not usually find old American Iron that's not well loved and in need of major repairs. I can admire the beauty of a restored 60 or 70 year old lathe but learning to hand scrape a badly worn lathe is not something I want to do. It takes a long tome to rebuild one and no parts are getting made when you're repairing the machine. Waiting for a good deal on one that's not beat to death doesn't get parts made either and it's still going to need work. I'd rather do some cleaning and setup and get on with making parts. Yes. It's not a work of art. Not my goal.
I have this rebadged Taiwanese lathe also, but alas I don't get the bling DRO attachments useless when you retool or change something - as for the cross slide gibs a machinist needs to have access to and adjust then remove and clean more than occasionally - how do you with this next to useless cluttering feature bolted ?. What about your compound and your tailstock - no DRO's - what's the point ? seems like old school masters just die out and nice new toys with lots of bling sit about collecting dust with no real machinist work. The age of snowflakes.
One might have to use DROs to appreciate them. No more backlash for one thing. My compound is usually locked down. Does a tailstock used for drilling need precision depth? Not really. For turning steps to dimension, locating grooves, or parting the long' feed is more than handy. Nothing there for threading? With this lathe it's prudent to leave the half-nut engaged, and precisely backing out and returning the cross slide for next pass gets easier. It's only bling if you think you need it. I don't, but still have it on two machines and newer versions aren't pricey anymore. Cheers.
12x36 gear-head. Sweet. Wait, "very unique?" Nothing is "very unique." "Unique" means "one of a kind." Something can't be "very one of a kind." It's grammatically incorrect and logically impossible. You've lost me now. I am abandoning your video. Get the basics, like GRAMMAR right, for cryin' out loud. I'll be the guy with the long shirt was a hippie too and had long hair. I saw a guy get sucked into a jet engine once. Why do you show that violent video? You slow down for traffic accidents too? The lathe, like a car, can kill you if you aren't careful. Everybody knows that.
@@makerspace533 Oh, you're quite welcome! I'm glad I made your day a little brighter, but "moronic?" I'm not the one with the bad grammar. Maybe my standards are higher than what you're used to, but then again my machining buddies work @ JPL & Northrop. So I'm used to people that know how to machine parts to space-tolerance AND can talk more gooder then ewe. Then there's your hippie. Again, *not* rocket science to wear work-appropriate clothing. A lathe can rip your arm off. It can turn a piece of work into a projectile with sufficient velocity to kill the operator and standers-by. The jet story is both funny & true. The whole lookie-loo thing is a personal pet peeve. Traffic where you live may be virtually non-existent, but here it is wrist-slittingly bad. AND THEN you've got the dummies that don't realize 2 metric tons traveling at 100 k/h (you know, the whole force=mass*acceleration thing) is more than sufficient to destroy the cars occupants. I work with power tools, I don't need to be reminded metal can hurt, but they still INSIST on looking and slowing me, & a thousand other travelers, down. So, no, I don't post gratuitous videos of people being harmed as "reminders." If someone needs reminding of this sort they shouldn't be working with power tools. ALL THAT SAID, I'm glad you folks are taking a safety first position, because there's as lot of dumb kids out there with a monkey-see, monkey-do genetic marker AND plenty of you-tubers posting videos of themselves doing dangerous &/or stupid things. I take them to task far worse than I took you because I think of those monkeys/kids lopping off a body part they might need in the future. Cheers! ;-)
This is by far the best video on this particular lathe I have seen on UA-cam. It solidified my decision to purchase one. I am an amateur to metal lathes but have 2 good friends that have operated them at a professional level. Thank you for posting this great video. It is extremely informative and I look forward to seeing some more videos with milling being done.
I watched this video to get more information on this particular lathe. Then I checked out the Maker Barn on Google. Then I discovered the Maker Space and discovered there is one near me. I went to check it out and it turns out they have the same Grizzly lathe as well as a bunch of other equipment. I am becoming a member because it is a heck of a deal to get use of that equipment for a bargain price - as well as the community it supports. It is AWESOME!
Thanks for the safety message. always figured "no long sleeves" but I used gloves once and paid the price - almost tore my arm off. Yet I see guys doing it all the time on these videos. Again - THANKS!!!
I’ll share a recent experience with my G4003 gunsmith lathe. It recently locked up on me while in use. We trouble shot the issue and found that the input shaft on the quick change gearbox locked up and also sheared the key on the 16/32 tooth combination gear. Ultimately the problem was caused by inadequate lubrication, which i routinely do on this and all machines. The problem is that if you think a squirt or two of oil in the tagged oil holes on the gearbox itself are enough, it just isn’t true. Those holes lead to a tray that is cast into the top of the gearbox housing. Inside this tray are additional lube holes that eventually make their way downward to the rotating gears and shafts inside the gearbox. Blah, blah, blah, but the moral of the story is when lubricating your machine, squirt at least 2 to 3 ounces of lube in this section of the machine to fill that tray. If you don’t see any dripping from the selector shafts into the chip pan, you likely don’t have enough oil in there. Good luck
Thanks for sharing what can and does happen when someone is "grabbed" by moving machinery.
Several years ago I took a machine shop class at a community college. The teacher cautioned us to never do dumb stuff, much the same list you covered. He told of an incident that happened some time before then in which a fellow with long hair was a student and the inevitable happened. His hair was caught in the spinning chuck and he was scalped immediately. The teacher didn't say - and we didn't ask - whether the student survived or not, something best left to the imagination. That single incident was why they added shutdown stations, located about every 20' along all the walls to kill the entire shop machinery. Although Murphy has probably been gone for quite a while, he still rules when it comes to chance.
Dear Mr. Carlson. Great Video, Great tips and teaching. One of the best videos about this machines.
The lathe has been doing well, no complaints. The only thing I miss is that the feed lever uses positive engagement rather than a clutch. I think this is normal in the small import lathes. The larger import lathes do use clutches to control feeds.
Nice looking lathe & especially nice looking DRO. Thanks for your comments on my video. I now have the radius/diameter working correctly using the 1/2 button instead of changing the resolution. I also mimicked the font & yellow color of the axis button and made Z button covers for the axis labeled Y - just more of my OCD kicking in. 😀 Enjoy your lathe!
I was shop Forman at a company that had this same exact lathe, i used it extensively, they are very good and tight machines and I’m looking to get one for my home shop!
I have never seen anyone who would be so stubbornly knit with his hands around the lathe and even lean on it
my professor was almost like behaving and spent one school year for occupational safety, nobody learned to use any tools
if safety is the first, nothing can be done because it is always too dangerous and does not earn even for a snack
security is always, always, and it is necessary to learn it in practice
so do not lean on any machines ever
with this exception nice presentation thank you
What language was your comment in before you put it through Google translate?
I have a 12 x 36 atlas,,, 50 years old but suites my needs,,,just got a 618 and 109 couldn't pass them up for 400 for both in great condition,,
which mechanism causes the spindle to stop very quickly at high speed without applying the brake. thank you
I have this lathe as well as a G0709 and so far I'm happy with both.
If you want to wear long sleeves they make paper suits you can put on that are reasonably cheap, tear easy and are disposable.
We went a bit overboard in our shop. Our Chuck boards came right up underneath chucks so that noobs really would have to go out of their way to drop a Chuck.
I have seen the caliper solution which is fine but many DROs offer the third function for very little extra putting all the info at one spot. Possibly could be used at the taper attachment. Just haven't seen it done and am curious if there are any serious obstacles to my doing it on the G4003G. Take care. Doug
I have had the G4003G which is a very similar model for several years now and am thinking of installing a DRO (I have that same model on my mill). So it would be helpful to see exactly where and how you installed the scales for yours as well as the sizes (metric) necessary. I am also wondering if a three axis DRO could be used to measure the quill travel on the tailstock as well? It would also be good to see you fine tune the compound and cross slide friction on the handwheels. Mine seem to loosen up a tad fairly quickly to where they may move a thou or two while machining if not held. Good subject matter for those of us who own that lathe. Take care. Doug
You can adapt & mount a caliper on the tailstock that will do the same thing. It will be just as accurate,
much less expensive and easier to install.
Hello , I have same lathe g4003 and I want to update with quick change tool and wich series you have it’s 100 or 200 series? And witch tool bit you use 1/2 (12mm) or 3/8(10mm) or smaller?
Thank you
We use BXA style. Mostly 1/2" tool shanks.
There are a significant number of experienced lathe owners who believe it is a mistake to store tools in a place where you need to reach across the lathe to get them. Of course you would normally only reach across when the lathe is stopped but the temptation may be to reach across when it is running and that is an opportunity for disaster.
Thanks for sharing this information. I'm buying a lathe like the one in the video and I have almost no experience. I'm super concerned about the safety, and what you have shared is exactly the kind of thing I was looking for. I won't place the tools there. thanks
@@Doppiovetro There are two kinds of people who store stuff behind their lathe. Those who have reached across their lathe while it is running and those who will. It is really easy to become focused on your routine, then something happens that knocks you off your routine and you do something stupid that you wouldn’t normally do. Your lathe doesn’t care that you forgot.
Can you use this metal lathe to also build wooden pool cues?
If you aren't careful accidents will happen. I will continue to wear long sleeves as would anyone who has had hot chips burn their forearms. I will go with safety for what will happen as opposed to what could happen. I also wear both a pair of glasses and a face shield. Chips go everywhere especially where they most damaging. Take care. Doug
Great video. Thanks.
I have the same lathe and it's about 5 years old. I'm having a motor problem and I'm going to have to pull the motor off to figure out the issue. It's stuttering going into reverse and a little bit in forward. I've checked everything and it's definitely the motor. It's either the capacitors or centrifugal switch. Also could be a winding. Have you ever had an issue like that with yours or one like it?
Not with the 4003, but a Grizzly planer has gone through a couple of start caps. There is probably a start cap and a run cap. The run cap is the smaller value. The start cap may have blown its seal.
I would bet start cap for sure. I’ve changed tons of them it’s very easy if you get the right part.
@@rustbeltmachine Other starting issue possibilities include a faulty contactor in the panel (BTDT) or F/R switch on the control rod under the lower front corner of the headstock. (BTDT) btw, my 12x36 is a HFT and decades old. Most Grizzly parts work just fine when/as needed, esp the two electrical bits I replaced. IMO it says much about the design that it hasn't needed to be changed or upgraded. Make chips, Boys! 😁
Where did you get the white tray? I could fabricate one, but I would rather buy it I'd it is cheap?
It was made from a melamine shelf purchased at Home Depot.
@@makerspace533 I went and ordered the digital display for our shop. We have a G4002, so I hope it works
O preço para o Brasil em $Cruzeirosa?
I've had nothing but issues from one of their products. My wife and I drove over 5 hours, and spent over $1200 at the Grizzly showroom in Missouri. Honestly the showroom is amazing. The product I got...not so much. I've had over 10 separate issues including defective, and back ordered parts sent to me. Grizzly did offer me $100 to keep the pos 😂😂😂. I like high quality tools, and won't hesitate to spend the money on them. SCM, felder, festool, saw stop etc. I like decent hand tools such as snap on, Milwaukee, dewalt, and I even think husky is decent due to being able to swap tools easily when they break one the job. We even have some harbor freight tools that I think are very very good. My experience with grizzly has been unsatisfactory at best. Not to mention they will not post my review on their actual website. Hopefully my review will help someone looking for equipment.
Lindo torno na entrega muita
Bolokracia compra ua torno e muita
Responsabilidade a nos.
Isn't the X-axis usually horizontal and the y-axis vertical (like on the laser cutter and CNC)?-KB
Lathes are treated a bit different. The crossfeed is X and the longitudinal axis is Z. I didn't have a Z, so I had to use Y.
I would really like to see in one of these lathe videos some one really make something. Not O here is another how to cut threads on a lathe. Made by someone who had only tried to cut threads about 3 times.. How about a shaft for a ball valve for a nuclear submarine. That might be interesting.....
then go and watch Joe Pieczynski's channel or Abom 79 or Tubalcain etc.
"It's called facing."
Unless it's grooving. 😁
Great video! Thank you for the lathe tour. Did you make the tool shelf on the top of the machine?
Yes, It's made from a Melamine shelf from Home Depot, very simple.
@@makerspace533 thank you
Could you do a short video sometime showing the construction of the shelf, how its attached and such? I also like the light attached to it with the bent conduit.
I just read about a young college girl who was pulled into a lathe by her hair and killed. Safety first.
Don't dare mention this lathe on the Practical Machinist forum, they will verbally assault you :D
I have a 10EE in my home shop, they can go pound sand.
@@makerspace533 All a matter of what you're willing to spend and how much time you want to spend rebuilding a worn out machine vs making parts.
At the price point of this machine you will not usually find old American Iron that's not well loved and in need of major repairs. I can admire the beauty of a restored 60 or 70 year old lathe but learning to hand scrape a badly worn lathe is not something I want to do. It takes a long tome to rebuild one and no parts are getting made when you're repairing the machine. Waiting for a good deal on one that's not beat to death doesn't get parts made either and it's still going to need work.
I'd rather do some cleaning and setup and get on with making parts. Yes. It's not a work of art. Not my goal.
David Hatzenbuhler l
I have this rebadged Taiwanese lathe also, but alas I don't get the bling DRO attachments useless when you retool or change something - as for the cross slide gibs a machinist needs to have access to and adjust then remove and clean more than occasionally - how do you with this next to useless cluttering feature bolted ?. What about your compound and your tailstock - no DRO's - what's the point ? seems like old school masters just die out and nice new toys with lots of bling sit about collecting dust with no real machinist work. The age of snowflakes.
I guess I've been all wrong using this bling on my milling machines and lathes for the last thirty years. Better lube that slide rule of yours.
One might have to use DROs to appreciate them. No more backlash for one thing. My compound is usually locked down. Does a tailstock used for drilling need precision depth? Not really. For turning steps to dimension, locating grooves, or parting the long' feed is more than handy. Nothing there for threading? With this lathe it's prudent to leave the half-nut engaged, and precisely backing out and returning the cross slide for next pass gets easier. It's only bling if you think you need it. I don't, but still have it on two machines and newer versions aren't pricey anymore. Cheers.
My G4003 is for sale.
Grizzly owners take note: ua-cam.com/video/o4IGdG-lycE/v-deo.html
It's an alright lathe. Too bad it's double the price that it use to be. Grizzly just ain't cheap anymore...
12x36 gear-head. Sweet. Wait, "very unique?" Nothing is "very unique." "Unique" means "one of a kind." Something can't be "very one of a kind." It's grammatically incorrect and logically impossible. You've lost me now. I am abandoning your video. Get the basics, like GRAMMAR right, for cryin' out loud. I'll be the guy with the long shirt was a hippie too and had long hair. I saw a guy get sucked into a jet engine once. Why do you show that violent video? You slow down for traffic accidents too? The lathe, like a car, can kill you if you aren't careful. Everybody knows that.
Thank you for your moronic comment.
@@makerspace533 Oh, you're quite welcome! I'm glad I made your day a little brighter, but "moronic?" I'm not the one with the bad grammar. Maybe my standards are higher than what you're used to, but then again my machining buddies work @ JPL & Northrop. So I'm used to people that know how to machine parts to space-tolerance AND can talk more gooder then ewe. Then there's your hippie. Again, *not* rocket science to wear work-appropriate clothing. A lathe can rip your arm off. It can turn a piece of work into a projectile with sufficient velocity to kill the operator and standers-by. The jet story is both funny & true. The whole lookie-loo thing is a personal pet peeve. Traffic where you live may be virtually non-existent, but here it is wrist-slittingly bad. AND THEN you've got the dummies that don't realize 2 metric tons traveling at 100 k/h (you know, the whole force=mass*acceleration thing) is more than sufficient to destroy the cars occupants. I work with power tools, I don't need to be reminded metal can hurt, but they still INSIST on looking and slowing me, & a thousand other travelers, down. So, no, I don't post gratuitous videos of people being harmed as "reminders." If someone needs reminding of this sort they shouldn't be working with power tools. ALL THAT SAID, I'm glad you folks are taking a safety first position, because there's as lot of dumb kids out there with a monkey-see, monkey-do genetic marker AND plenty of you-tubers posting videos of themselves doing dangerous &/or stupid things. I take them to task far worse than I took you because I think of those monkeys/kids lopping off a body part they might need in the future. Cheers! ;-)