Thanks a lot man!! I just wanted to know how to remove the plastic knob since i ralized that it seemed to be stuck while using it, just needed to raise it a little, great method by the way!!
Thank you for this video. By chance do you have the service notes for this version? I have the same Taiwan version "DD-3C" board and cannot find service notes anywhere. I actually need the "Rotary Mode switch" but am unable to find the correct part number as I cannot find service notes for this board. The only service notes available are for the DD3A, B, and T. Where or how did you find that POTENTIOMETER replacement? None of the Boss Service centers are any help. They all just say throw it away and buy a new one.
I'm wondering the same thing - the rev T schematic is the latest I've been able to find. It seems the mode switch is actually just a potentiometer with 4 detents. The pedal I'm troubleshooting has a fault whereby in L mode you have to hold the pedal down to get the delay effect (instead of the foot switch toggling the effect).
My “Boss DD-3” turns on and appears red LED but no fx come out. My Power Supply’s @ MXR ISO-Supply- I’ve always used a 9v power supply/one-connect/daisy chain/9volt 🔋 but it stopped working one day. Now light comes on but again, no fx. I plug fx in front of amp w/power from (ISO). Signal passes through, LED turns on/off, but fx signal is useless. Any advice where a good place to begin troubleshooting, learning etc? Anyone got #’s to boss? Let’s get it!
Thanks a lot man!! I just wanted to know how to remove the plastic knob since i ralized that it seemed to be stuck while using it, just needed to raise it a little, great method by the way!!
What's the specs for the Level pot?
Thank you for this video. By chance do you have the service notes for this version? I have the same Taiwan version "DD-3C" board and cannot find service notes anywhere. I actually need the "Rotary Mode switch" but am unable to find the correct part number as I cannot find service notes for this board. The only service notes available are for the DD3A, B, and T. Where or how did you find that POTENTIOMETER replacement? None of the Boss Service centers are any help. They all just say throw it away and buy a new one.
I'm wondering the same thing - the rev T schematic is the latest I've been able to find. It seems the mode switch is actually just a potentiometer with 4 detents. The pedal I'm troubleshooting has a fault whereby in L mode you have to hold the pedal down to get the delay effect (instead of the foot switch toggling the effect).
Good job. Can you do a video on Boss RC-3 looper ?
Thank you Aditya. Should I repair one, I will upload it. Thank you for stopping by 👌
Sir new outpin kha se available hoga
Where did u buy that replace ment part?
how can buy this Volum DD3
Assalamualaikum bang dd7 saya led takmau hidup. lain semua ok
Apa yang harus saya buat?
Old dd3 effect better than new dd3 ?
Mera diley kharab ho chuka hai bane ga sar
My “Boss DD-3” turns on and appears red LED but no fx come out. My Power Supply’s @ MXR ISO-Supply- I’ve always used a 9v power supply/one-connect/daisy chain/9volt 🔋 but it stopped working one day. Now light comes on but again, no fx. I plug fx in front of amp w/power from (ISO). Signal passes through, LED turns on/off, but fx signal is useless.
Any advice where a good place to begin troubleshooting, learning etc? Anyone got #’s to boss? Let’s get it!
Mine’s got this going on also, any fix?
DD3 me kitane prakar ki ice hoti hai
Hii sir..I am from India. i want to repair my boss GT-100 guitar effect processor.
Mera Kharb ho gya h kase tikh karu
pedal sanshodhan meree visheshagyata nahin hai. main hee unhen theek karata hoon. bahut khed hai.
@@yusdiy.no do ap tikh kar dage
@@moasad4952 veting ke lie dhanyavaad. krpaya vash mein karane par vichaar karen
My dd 6 effect outpin kharab tut gai hai new out pin kha se mile ga
4g3-4 b50k alpha volume control chahie dd 3
Will you Cell me dd3 seconds