Boss DD-3 Delay Pedal Troubleshooting and Repair (

Поділитися
Вставка
  • Опубліковано 12 січ 2025

КОМЕНТАРІ • 30

  • @MaybeMyBad0113
    @MaybeMyBad0113 Рік тому +2

    なんの話をしてるから分かりませんが、あなたがDD3を愛してる事は伝わりました。

  • @jhoniirawan2172
    @jhoniirawan2172 2 роки тому +2

    I have a dd-3 sound can come out, but for the delay it can't even though the LED is on. and for the voltage everything is normal. Please help

  • @JeremiahDsilva
    @JeremiahDsilva 2 роки тому +1

    Hi. Im facing a very unique prob with DD3. Whenever i turn the knob to the 800ms , i get a thumb that repeats itself which goes on forever. Doesnt happen with the medium and short delay..Only the long delay as soon as the knob is selected. Any idea what could be causing that

  • @princelysnail1998
    @princelysnail1998 9 місяців тому

    I have a dd3 that works, however, the selector switch goes through all modes before it reaches the second “click”.
    Making it so I have to carefully turn the knob to where I need it, and hope it doesn’t move while playing.
    I have absolutely no experience with electronics but am wondering how hard it would be to fix this myself, or if I should just bring it in somewhere

    • @mevmevmev
      @mevmevmev  8 місяців тому +1

      My guess is the control itself has a mechanical issue and would need to be replaced. Soldering would be required, but not hard otherwise. Finding a nee part may be difficult.

  • @pneumatica3
    @pneumatica3 Рік тому

    Will you share that schematic? I have one that malfunctions in a different way.

    • @mevmevmev
      @mevmevmev  Рік тому

      www.8bitsindgenug.net/boss_dd2.png

  • @TheBlackjacky31
    @TheBlackjacky31 9 місяців тому

    Hi,
    Thanks for your post.
    I have a dd3 boss pédal and something strange happened.
    First, when i power on my pédal board, this pédal IS "on" when other pédale are Always ""off" before steping on thèm .... I don't know if it's normal 🤔
    This pédal began to make crunch noise when activating it and désactivation it....
    At thé same Time when activating it, my tube AMP fuse blowed, IS it possible according to you ?
    I triés this pédal with a classic 30 peavey and thé pédal only Works if you let your feet on it hold thé effect, but Nevers in on or off mode, it seems that thé Switch IS dead but Can this issue blow an AMP fuse ??
    Thanks for your answer !!

    • @mevmevmev
      @mevmevmev  9 місяців тому

      If the amp is all tube, it seems unlikely the pedal could cause the amp fuse to blow. Does the amp work after replacing the fuse? If amp is solid state, there is a chance an extreme transient from a defect in a pedal could damage a component in the amp which could then cause a fuse to blow.

    • @TheBlackjacky31
      @TheBlackjacky31 9 місяців тому

      @@mevmevmev hi thanks.
      It's an AB763 super reverb type.
      We replaced thé fuse and it blowed at thé same Time i used thé pédal .... 30 minutes later.
      I tried it on a classic 30 and nothing Bad happened ...

  • @ClaimOfRightMuso
    @ClaimOfRightMuso Рік тому +1

    Thanks, pal.
    I checked out the rest of your video on Rumble (are we allowed to use that name here?) Also, I agree with your point on free speech - a pity UA-cam seem not to practice this.

  • @julioboscher
    @julioboscher Рік тому

    Hi, Thank you for this video. I'm facing the same problem but I don't have the schematics. Could share it or tell me where to find it?

    • @mevmevmev
      @mevmevmev  Рік тому

      www.8bitsindgenug.net/boss_dd2.png

    • @mevmevmev
      @mevmevmev  Рік тому

      If link doesnt work. Search for "boss dd3b" and look at results images. I cant seem to find the actual service manual niw.

  • @TheLinkIsLost
    @TheLinkIsLost 2 роки тому

    I have a boss digital delay DDR-6 that just stopped working. It was pretty much brand new. I moved to my new place years ago and it was just dead. Never figured out what happened to it.

    • @mevmevmev
      @mevmevmev  2 роки тому

      A dead condition is often easier to fix compared to other problems they can have.

  • @AntonioGrazioli
    @AntonioGrazioli 2 роки тому

    I just got an half working DD-3...
    Sound comes thru if the pedal is off
    When the pedal is ON, no light on the Led and no Delay...
    but....if I put it into "HOLD" mode and I press the pedal the led lights up and the sound is delayed indefinitely until you release the pedal (how it is supposed to work)
    Any hint on what and where to loook at? thanks

    • @mevmevmev
      @mevmevmev  2 роки тому

      I would first check the mode switch solder joints and the wires that connected between it and the main PCB for breakage. 2nd the switch itself could be damaged. 3rd, IC9 is a possiblity as it appears to only be used for the modes other than Hold. Beyond that it gets more complicated. Could do diode checks on the diodes and transistors that connect to the switch.

    • @AntonioGrazioli
      @AntonioGrazioli 2 роки тому

      @@mevmevmev Thanks a lot, your are really helpful hints. I will definitely have a look into it this afternoon :-D thx a lot!

    • @eucarloshenrique1
      @eucarloshenrique1 Рік тому

      ​@@AntonioGrazioli did you solve the problem?

  • @littlebabysage
    @littlebabysage 2 роки тому

    i have a dd-3 that also just stopped working. no power to the pedal. regardless if using battery or plugged in...

    • @mevmevmev
      @mevmevmev  2 роки тому

      First steps I would take is to trace the voltage from the battery (or power supply) to the input if the regulator (IC10) on the schematic shown in the video. If 9V is missing, check if D6 is shorted. If there is 9V but no 5V on the output. then the regulator may be bad. If there is 5V, it gets more complicated :)

  • @ezequielaugustodelcastillo6467
    @ezequielaugustodelcastillo6467 3 роки тому

    Nice video. I have a problem with my ds3, repeats sounds lower than dry signal. You play guitar, you have output ok but repeat is in a lower volume or sound like far, you know what i mean? Maybe if I have MXR Micro Amp activate isn't a big difference but you can hear something wrong. Thanks for read.

    • @mevmevmev
      @mevmevmev  2 роки тому

      The mix control should adjust the wet/dry ratio. Is that knob not working?

    • @ezequielaugustodelcastillo6467
      @ezequielaugustodelcastillo6467 2 роки тому

      @@mevmevmev i don't have that knob... only entry signal, feed back, delay ratio and delay modes

    • @mevmevmev
      @mevmevmev  2 роки тому

      @@ezequielaugustodelcastillo6467 the first knob on the left "E-LEVEL" turned up (clockwise) should bring up the repeat level. Is that knob not doing anything?

  • @djrkofficial9210
    @djrkofficial9210 Рік тому

    Upna numbar do