How to Make Whiskey Dispenser at Home | Handmade Alcohol, Liquor, Whiskey Dispenser Ideas for Gift
Вставка
- Опубліковано 4 лис 2022
- Hi there.🖐 in today's video, we shared how to make a whiskey dispenser at home. It would be the amazing handmade alcohol, liquor, and whiskey dispenser idea. If you follow these simple steps. We hope you can make your own whiskey tap. So, watch the handmade whiskey dispenser full video and try this at your home. In this video, we made the whiskey dispenser from wood and glass block.
Every Think that We Use to Build This Whiskey Dispenser You Can Find Here:
👉 Diamond drill bits 16mm and 18mm: amzn.to/3HTyz4E
👉 Wood Drill bit 20mm: amzn.to/3rtdg3a
Stay connected with "Wood Euphony Woodworking" official UA-cam channel to get more exclusve videos like this one. Do LIKE, COMMENT and SHARE. Don't forget to hit the SUBSCRIBE button and the BELL 🔔. So that you never miss any updates.Thanks for watching :)
✔Subscribe Now: rb.gy/hzysku
------------------------
📺 More DIY Videos for You:
★ Stunning coffee table with resin and walnut wood
• stunning coffee tables...
★ How to make clock from wood and epoxy resin
• How to make clock from...
★ From fail epoxy clock to treasure
• From fail epoxy clock ...
------------------------
🛒 Esty shop: www.etsy.com/shop/WoodEuphony...
🌐 My own web shop: woodeuphony.com
📧 For Business Inquiries:
------------------------
🔸 Follow Us on Social Media:
▸ Facebook : / woodeuphony
▸ Instagram : / wood_euphony
▸ Twitter :
▸ Pinterest:
▸ TikTok:
------------------------
💰 SPONSORED:
No, this video was not sponsored.
⌚ SCHEDULE:
Weekly New Video
------------------------
About me:
Hi there, My name is Anžej and I'm part time woodworker. I love to make things with epoxy resin... this youtube channel is about woodworking with wood and epoxy resin. I don't have my own shop so you will see me in the wood shop from Matija Rižner, owner and CEO of EssenWoodcraft (www.esen-woodcraft.com). Thank you Matija! .
------------------------
#WoodEuphonyWoodworking #WhiskeyDispenserDIY #GiftIdeas #woodworking #lifehacks #gift #dispenser #liquordispenser #alcoholdispenser #diy #doityourself #liquordispenserdiy #beveragedispenser #winedispenser #homemade #alcoholdispenserdiy
------------------------
🎧 Music added from: www.epidemicsound.com
🎬 Recording gear:
Insta 360 one r
mini tripod
------------------------
© 2022 “Wood Euphony Woodworking” ( Official UA-cam Channel )
Thank you for watching this video, click the "SUBSCRIBE" button to stay connected with
this channel.
🌟 Subscription Link: rb.gy/hzysku
Awesome work love it!
Thanks Paul :)
love it
Thanks :)
Little one stealing your tools already 🤣
Great project!
🤣 jup, he started quickly :)
Thanks 🙏
Great build. What holds the spigot in the hole you drilled? No nut on the threads once inside the bottle?
Thanks for your help
Hi :)
Thanks. It’s just a silicon :)
Love the finger push sticks. ❤️
🙈
Didn't see you rinse the glass shards out of the block before you filled it; hope you did. Glad the little kid stole your drill. Serves you right for not using ear or eye protection!
No worries :) I did rinse the bottle :)
Yap… working protection isn’t my strong point…
you're not concerned about the inside of the glass not being food safe? Also I'm pretty sure they fill in between the glass with argon gas. Love your thoughts on this. great job it looks really nice.
Hi :)
So yes I was concerned but my friend (works in glass company) did say if I fill the “bottle” to the top with water then will be ok. Also I did clean it with 99% alcohol… we did drink from this dispenser two jack Daniels and and three bottles of local hand crafted whiskey :)
Great idea! I actually have a couple of square glass so I would like to try to make one or two dispensers. Where have you found the valve and the faucet ? and have you put some silicone when you've inserted the glass in the square wood to keep it in place ? keep up the good work ;)
Thanks :)
You can find it on amazon or ebay quite cheap :)
No, the wooden structure is very tight and the faucet are preventing glass to fall out :)
Want did you use to fix spigot to the glass and want cork did you use thanks
Hi Chris :)
So I fix the spigot with silicon glue.
I used a metal cork with rubber around where it meets the glass.
What size holes are drilled and what type of spigot do you use? Thanks
First you must find spigot and then the diameter that is on your spigot you drilled in to the glass. So all depends what spigot you got. You can find them on amazon or ebay.
Could you tell me the dimensions of the pieces you used or even just the glass piece you built around? My buddy is trying to make one of these so I was going to get him a really nice cut of wood for the project as a birthday present.
My dimensions won’t be any good. Each glass block is custom fitted because they aren’t perfect square.
Nice, I did a video on this too
Post the link. I would like to see :)
How do you clean the glass box after drilling hole in it? It might have glass dust in it
I didn’t show but I did clean it with soap and water :)
What is keeping the glass block from sliding out of the front or back of the wood frame?
A very snug fit :D
Trying to build this and every time the glass block cracks from the spigot hole LONG AFTER IT IS ASSEMBLED.... sitting for hours and hours just fine and the next morning it's cracked. @Wood Euphony Woodworking did that ever happen to you and what's the solution?
Hi :)
I didn’t have problems with that…
But I did have the problems with silicone :) some silicone don’t bond quite well with glass…
@@woodeuphonywoodworking thanks for the quick answer, Glass Block #9 actually turned out 😲- I think the Problem was that i drilled too close to the corner and by sacrificing some of the volume in the very bottom and place the spigot a little higher the glass stayed stable. I did not like the Silicone solution either and instead drilled a 1.5 Inch fill hole, which allowed me to reach in with some long needle nose plyers and mount the spigot with the included silicone seals, chrome grommets and nut. I used a black rubber stopper from Home Depot as a stopper and it looks okay.
Uu nice… I will try it with your idea with the silicon seal… maybe will be better than my original idea… thanks :)
any reccommendations for a stronger bond than silicone?@@woodeuphonywoodworking
Is there air pressure in the block? Do i have to pay special attention when drilling inside?
Hi :)
No there isn’t pressure in it… just make sure that you don’t press to hard and that you add a water to the drilling spot.
@@woodeuphonywoodworking Thanks
How did you install the spigot ?
Hi.
I did drill a simple whole with diamond drill :)
Mmmmmm. Glaaa shards in my whisky is the best. How’d you make sure it was clean? This is great work. I’ll be using your design for my own.
I just don’t know how to remove all the glass
Hi :)
I didn’t show it but I did wash 10 times before gluing the valve :) there vast big glass pieces in beside 2 small circles … only white glass powder… when you drill don’t push to hard….
@@woodeuphonywoodworking thanks for the advice! That makes more sense with the whole glass dust. I’ll keep that in mind
@@gmeister03 no problem :)
If you have any questions just ask me , I’m glad if I can help :)
Be safe!
Where do you get your blocks from
You can ordered in amazon or eBay… I buy it in building store where have a cement and other building material…
Ok but where did you get the glass?
Is that a 6x6 block
Correct 👍
Where did you get the glass block?
Hi.
I did buy it in hardware store.
Can you please share a link for the taps?
You have on amazon. They have many varieties…
Any research done to assure glass block is lead free?
glass does not emit harmful substances, only when we drill into it.
How do I remove the two drilled glass pieces inside the block? 🤔
With help of the water :) it’s much easier:)
How do line up the hole in the wood exactly with the hole in the glass for the plug?
First you drill in the wood then you insert glass block and mark where you must dril with the diamond drill… easy peasy :)
@@woodeuphonywoodworking ty makes sense. Probably dumb question. Ty again
No questions is dumb :) no problem, it’s my pleasure :)
@@woodeuphonywoodworking ty, Merry Christmas to you and your family
@@ald.3449 ty and same to you and your family:) happy holidays!
Very nice job, in fact, I think he does it. But I'm not going to make the mistake that this gentleman has made, of giving his son a screwdriver and manipulating a toxic element in front of him
Thanks 🙏
But I don’t know what toxic element you mean?
Gimme a break…