Husqvarna Automower Rebuild (450X, 430X)
Вставка
- Опубліковано 3 чер 2018
- In this video we start with a bare lower chasis and piece together a Husqvarna 450X Automower. All the boards, motors, wheels, and wiring is removed and we start pretty much from scratch and give you an idea of what it takes to put this 450X back together. With the exception of the 2nd battery and the circuit board for the ultra sonic sensors, this is the same as assembling a 430X Automower. Our main reason for this video was just to show everyone that it is much simpler inside than what most people imagine. These machines are VERY well designed and easy to assemble as you can see.
If you're looking for more info on automowers, here are some good resources for sales, parts, and installation:
EM Herr Farm & Home Center (1-717-464-3321)
Automowerinfo@Gmail.com
EshlemaniaTV@Gmail.com
#Husqvarna #Automower #EshlemaniaTV #AutomowerGuy #Automowerinfo #Robotics #HowTo
I have 2 batteries in my 430x and it works perfectly.....
Many thanks , Phillippe , from belgium ;)
Nicely done. Now I've found a good 450x repair place within an hour drive from me. I've bookmarked your store for future reference.
Just dismantled three Robomow RL850 circa 2007, noting some differences. Batteries were in a pack accessible by user (to those thinking of adding batteries, probably yes, look up waterproofing rc lipo battery packs with PlastiDip, wiring more than one pack in parallel, and how to charge externally, you will need to do some rewiring). Circuit boards were held in place with plastic guide pins and clips, or rubber guides, no screws. Cover held to bottom with plastic clips and rubber retainers, no screws. Blades clipped in, no screws. Drive wheels held in with e-clips, no nut or torque. No exposed wires. Thanks for confirmation that the basic difference between these models is number of batteries. Right to repair!
Great video.
Thank you!
Thanks!
Very useful video! Thank you very much!!
Thanks for the feedback
and super god video super explaind HEJ/YO from 3200 Helsinge Denmark
Hi, this was really useful. Do you know where I can obtain a service manual for 430x so I can do my own servicing.
That was great, thanks for doing this video. Can you share why you had to change the lower chassis?
Thank you sir! The reason we were changing the lower chassis is because this was a VERY early 2016 model that had been taken apart and put back together many MANY times for training, testing, swapping parts out for on other units and so on. Through all the times it was taken apart and reassembled some guys over tightened the screws and pulled the threads out of a few of the holes every now and then. So we replaced the lower chassis so we could get a proper seal on it before we put it through anymore battles.
As per Fenten2000: I would also like to know if greater capacity can be gained by adding additional batteries to the 430. Either inside the Chassis, or even externally mounted in a weather proof enclosure on top of the mower. It looks like these are simply 18650's grouped together, it would be incredibly easy to add to it, or simply replace the lot with an external enclosure. - My main reason is to get additional run-time during the day. It wouldn't bother me with the additional charge time.
Would you be able to advise? Thankyou, - Peter
Adding more battery elements in parallel would have significant effect if user would change charging adapter too, but 450X's adapter might need different low voltage cable and therefore 450X's charging station. If average charging station search time (can be checked from hidden menu) is under seven minutes, there is no need for battery enlargement.
Hello from Spain, great video, I learned a lot from the automower,
I have a question, you said that you cannot add a second battery to a 430x because you can not connected to the motherboard, but could you connect 2 batteries together (or a bigger battery (same power, more capacity) and then having only one connection to the motherboard?.
Sincerely, Feten
As per Fenten2000: I would also like to know if greater capacity can be gained by adding additional batteries to the 430. Either inside the Chassis, or even externally mounted in a weather proof enclosure on top of the mower. It looks like these are simply 18650's grouped together, it would be incredibly easy to add to it, or simply replace the lot with an external enclosure. - My main reason is to get additional run-time during the day. It wouldn't bother me with the additional charge time.
Would you be able to advise? Thankyou, - Peter
Adding more battery elements in parallel would have significant effect if user would change charging adapter too, but 450X's adapter might need different low voltage cable and therefore 450X's charging station. If average charging station search time is under seven minutes, there is no need for battery enlargement.
is there not at fastning/moment diagram from Husqvarna too all "fix"
Hey, how are you doing? I have some questions about the motor of the Automower itself. I'm doing an university project and can't find especifications of those kind of wheel motors. Do you know exactly what's the Torque (in N.m) of it and up to what RPM they can go? The voltage is 18 V, right? Do they have an specific gear ratio from the motor to the wheels or is it a direct drive?
I've trying to simulate those machines like EV's on MATLAB, but I've been having difficulties with finding these kind of information. I would appreciate very much if you can help me with that.
Hi did you find eventually any info? I want to know the power and the gear ratio. much thanks!
Are those Sony batteries in there? VTC5?
They are labeled "Husqvarna" so that's all we can really say about them.
Hi. Thanks for your informative videos. I just bought a Husqvarna 315X and immediately regret not buying the 430X (yes I saw your comparison between 315X VS 430X) Now I am stuck with the 315X with low/poor performance! Do you know if I can install a bigger battery in the 315X from the 430X? It's 2.6Ah vs 5.2Ah... Please help me out... 😊
Did you buy it from a dealer? If you are within the first 60 days of ownership you can return the 315X for a 430X under Husqvarna's Crown Commitment policy. Here's a link to information about it: www.husqvarna.com/us/products/offers/automower-crown-commitment/
@@EshlemaniaTV thanks for the reply. The thing is I bought it via a friend that works for Husqvarna. And I got a great deal on it. So I would rather not swap it out to cause any inconvenience for the friend. I have ordered a bigger battery from the 430X and see how it works out! 😊 What do you think? 😊 👍
Are you having any issues with the updated app?
We've heard about people having issues, but haven't really experienced any. It's more of a network issue than an app issue. The connect boards are currently working on a 2G network, but they're getting ready to switch over to a 3G network.
my Warranty is almost out So I Am Looking for a Mod to Raise my mower about 1/2 inch..my St. Augustine grass does not like being cut so short in the summer. any Ideas ? ?
I do!! But, we will probably have to wait until late this year or early next year to get confirmation on weather it will work. Don't worry though, I'll let you know as soon as I have all the info.
As always your on top of it....thanks...let me know what and when :)
In 2019 there will be 4 new models (with "H" in name) for North America. They can cut grass higher than normal models.
HI
I have husqvarna automower 320.My battery is stay old. i took it from mower. here 18650 1600mah vtc3 cells. i bought cells 18650 vtc6 3000mah and did same 5p2s. old bat has bms board (bq77908A). i re soldered and output of bms 7 volts. i am thinking bms is not working with new cells. how to restart/startup this bms with new cells? my be your know something ? thank you
Do you own an Ace hardware and do all the Aitomower stuff threw Ace or on the side. Feel free to delete this comment if it is to much personal information. Just thinking about business ideas and that looks pretty awesome together.