First-Look & Install: Traxxas TRX-4M 2-Speed Transmission (9891)

Поділитися
Вставка
  • Опубліковано 6 вер 2024

КОМЕНТАРІ • 24

  • @streetgangtm
    @streetgangtm Місяць тому +2

    I just bought one and installed it with my furitek cedar and absolutely love it. It's bonkers in high gear on 2s and 3s is just obscene. Absolutely perfect blend between the stock and crawl gears for the low gear. In fact I wish traxxas offered the 32.7:1 ratio as a gearset on it's own. Unfortunately my bronco is uber scale with an interior so it's a no go as it's way too tall compared to the stock transmission. I also tried to put the 2 speed in my injora tarantula to no avail- unless you basically reconstruct an entire front end the shift lever gets in the way of the front hood and suspension. It's probably a no go for the Meus Ripper as well.

    • @slomofan2070
      @slomofan2070 Місяць тому +1

      Thx, helpful, because of the needed Place when not stock

  • @shanenordrum8482
    @shanenordrum8482 Місяць тому

    I’ve had one in my high trail with portals and 70mm tires and I love it. Had it in for a month or so now.

  • @mpampis_o_fou2027
    @mpampis_o_fou2027 Місяць тому +1

    Nice video and the most beautiful bronco Trx4m I have seen!

    • @rcnewb
      @rcnewb  Місяць тому +1

      Thank you for the compliment!

  • @jefflee1698
    @jefflee1698 Місяць тому +1

    What is the trick to bind to the mt12. I’m having trouble binding mine.

    • @rcnewb
      @rcnewb  Місяць тому

      I found a Reddit post that had some useful steps regarding binding the MT12 with the Traxxas receiver: www.reddit.com/r/TRX4M/s/E6QUQ9a0tN

  • @a-guy1912
    @a-guy1912 Місяць тому +1

    I kinda want this

  • @The_RC_Guru
    @The_RC_Guru Місяць тому +1

    Sounds a little crunchy

    • @rcnewb
      @rcnewb  Місяць тому +1

      It’s noisier than the stock transmission (or any other single speed), but I think that’s due to the additional gears and more moving parts. Mesh seems to be set correctly.

  • @dallasdelano8235
    @dallasdelano8235 Місяць тому +1

    How do you install the high speed gears onto the 2 speed

    • @rcnewb
      @rcnewb  Місяць тому +1

      Based on what I’ve seen, you can open the transmission case and swap out the standard “normal” gears.

    • @dallasdelano8235
      @dallasdelano8235 Місяць тому

      @@rcnewb yes I did it, it’s not hard to do. It’s good but not that much power only top speed

  • @tuna3461
    @tuna3461 Місяць тому +1

    I wonder how it performs with the Injora motor. I’m probably gonna get one but I imagine even with the high gear ratio the 87t is still not as fast as the 48t. At least that’s how the motors felt to me

    • @rcnewb
      @rcnewb  Місяць тому

      That's what I'm wondering as well. I'm going to keep the Titan in it for a few test drives but I think an Injora 180 Pro will find its way into that transmission sooner or later. Maybe my High Trail won't be the beneficiary of a motor upgrade after all. :)

    • @The_RC_Guru
      @The_RC_Guru Місяць тому

      48 will be faster with less torque, and the opposite with the 87. Honestly if the high speed w 87 is good enough you’re better off keeping it in

    • @shawnserediak6783
      @shawnserediak6783 Місяць тому

      The 48 is by far more powerful. Torque is improved as well. Best upgrade I did. WAY BETTER in everyway

    • @The_RC_Guru
      @The_RC_Guru Місяць тому

      @@shawnserediak6783 nah. You just aren’t experienced with brushed motors or have confirmation bias or can’t understand the concept of how brushed motors work. That’s all.

  • @fyego
    @fyego Місяць тому

    Hi! Can you tell if this new trans gears are mounted in ball bearings or bushings? Thanks!

  • @RCfanAddict
    @RCfanAddict Місяць тому

    This is laughable!

    • @rcnewb
      @rcnewb  Місяць тому

      Sorry you didn’t like the video.

    • @RCfanAddict
      @RCfanAddict Місяць тому

      @rcnewb Great video terrible product. Sorry I should have been specific