Hi There 🖐 I recently used the Labocosmetica 3 ph wash method on my Toyota Tundra, that I ceramic coated about a year ago, and was blown away how it unclogged and restored my ceramic coating. I am extremely impressed with the results and would 100% recommend you try this impressive wash system. Cheers!!.. 😎
Glad to see you are diving into Labo. Good video, some suggestions and tips I have learned over the last year using them. The new version of Primus 2.0 is substantially better than the version used here (original) as well as Purifica which is now an upgraded formula (technically not enough to be a 2.0 from what Reggy at Labo explained) - increased strength, lubricatio while maintaining safety - these are now available in the new cylinder style bottles. Both of these new versions can now be used in the bucket, which makes them incredibly versatile. For 3pH after the second step of foaming on Purifica - you leave that on the surface and begin the contact wash with Semper in the bucket (1 oz to 6 gallons of water). Dilution ratios in the foam cannon for both Primus 2.0 and Purifica (upgraded version) depend on level of dirt - 1:10 for both as maintenance. If heavy dirt go up to 1:5 for both. As mentioned below, Semper has very strong dilution and technically wasn’t designed to use in the foam cannon. That being said I do use it in the foam cannon as well (MTM PF22 and Kranzle 1122). 1 oz of Semper and 1L of water produce amazing foam. It’s quickly become my favorite pH neutral shampoo - love the scent and lubrication. To me KCx Gfx is the only other shampoo it rivals in scent haha too many fruity scented pH neutral shampoos on the market these days.
Hands down the best 3ph system on the market. Glad you enjoyed the labo products. As for saying primus and purifica have no scent is wild. 😂 . Primus and purifica can be used in direct sunlight with absolutely no issues. Did a test here in florida and reggie has said it's fine. Great review 👏
If you like the multistep process you should definitely check out the chem x stars and stripes, some of the best touchless out there and super slept on. Will be super interesting to see how these will compare.
Have you tried the Chem X Stars and Stripes? I have some on the way I’m going to try. Seems like it’s steps 1 and 2 of the 3PH method, but it has you put the acid foam on first and alkalinity foam on top of the acid. Supposed to bad as close to a touch less wash as you can get. Curious to know your thoughts or if you have tried Chem X. I try to keep up with maintaining 4 vehicles, so if I can find a way to expedite my wash process even if every other wash will save me a ton of time!
ive heard its great, ive also heard it suggested they are coming to the house of rags and i was honestly waiting a bit to see if they do. I have 4 lines here to try, so i could probably drop a video daily for the next month and not get through them all, but its definitely on my list for sure by end of year.
What kind of nozzle do you have on your pressure washer gun? Like how wide the spray pattern is. I’m sure you are using a 40 degree, but mine never sprays that wide. I have the MTM Acqualine 4.5 40 degree nozzle for my AR 630TSS and my width of pattern is nowhere as wide as yours.
I have the obsessed garage 4.0 40 degree Maybe check yours and see if you have something stuck in it. I’ve heard of guys finding small metal shavings in theirs and needing to clean them out
@@unreviewed thanks for the advice. I believe the nozzle is fine. I do get right around 1000psi with the 4.5. I have a 5.0 but pressure drops under 1000psi. It’s got to be the make/brand of nozzle. Maybe OG Mosmatic is the way to go.
Not sure what dulution you used, but Sempre isn't designed to be used in a cannon. All you need is 1 capful in your bucket (1:800 dilution). The surfactants will clog up your coating if used more concentrated.
Hi There 🖐
I recently used the Labocosmetica 3 ph wash method on my Toyota Tundra, that I ceramic coated about a year ago, and was blown away how it unclogged and restored my ceramic coating.
I am extremely impressed with the results and would 100% recommend you try this impressive wash system.
Cheers!!.. 😎
Glad to see you are diving into Labo. Good video, some suggestions and tips I have learned over the last year using them.
The new version of Primus 2.0 is substantially better than the version used here (original) as well as Purifica which is now an upgraded formula (technically not enough to be a 2.0 from what Reggy at Labo explained) - increased strength, lubricatio while maintaining safety - these are now available in the new cylinder style bottles. Both of these new versions can now be used in the bucket, which makes them incredibly versatile.
For 3pH after the second step of foaming on Purifica - you leave that on the surface and begin the contact wash with Semper in the bucket (1 oz to 6 gallons of water).
Dilution ratios in the foam cannon for both Primus 2.0 and Purifica (upgraded version) depend on level of dirt - 1:10 for both as maintenance. If heavy dirt go up to 1:5 for both.
As mentioned below, Semper has very strong dilution and technically wasn’t designed to use in the foam cannon. That being said I do use it in the foam cannon as well (MTM PF22 and Kranzle 1122). 1 oz of Semper and 1L of water produce amazing foam. It’s quickly become my favorite pH neutral shampoo - love the scent and lubrication. To me KCx Gfx is the only other shampoo it rivals in scent haha too many fruity scented pH neutral shampoos on the market these days.
Hands down the best 3ph system on the market. Glad you enjoyed the labo products. As for saying primus and purifica have no scent is wild. 😂 . Primus and purifica can be used in direct sunlight with absolutely no issues. Did a test here in florida and reggie has said it's fine. Great review 👏
Thank you.
I moreso meant that you dont notice the smell while using it ;)
If you like the multistep process you should definitely check out the chem x stars and stripes, some of the best touchless out there and super slept on. Will be super interesting to see how these will compare.
added to the list, thank you!
Have you tried the Chem X Stars and Stripes? I have some on the way I’m going to try. Seems like it’s steps 1 and 2 of the 3PH method, but it has you put the acid foam on first and alkalinity foam on top of the acid. Supposed to bad as close to a touch less wash as you can get. Curious to know your thoughts or if you have tried Chem X. I try to keep up with maintaining 4 vehicles, so if I can find a way to expedite my wash process even if every other wash will save me a ton of time!
ive heard its great, ive also heard it suggested they are coming to the house of rags and i was honestly waiting a bit to see if they do. I have 4 lines here to try, so i could probably drop a video daily for the next month and not get through them all, but its definitely on my list for sure by end of year.
What kind of nozzle do you have on your pressure washer gun? Like how wide the spray pattern is. I’m sure you are using a 40 degree, but mine never sprays that wide. I have the MTM Acqualine 4.5 40 degree nozzle for my AR 630TSS and my width of pattern is nowhere as wide as yours.
I have the same system. I use a 4.5 or 5.0 You may have a bad nozzle. Your pressure at 4.5 should be just under 1K psi
I have the obsessed garage 4.0 40 degree
Maybe check yours and see if you have something stuck in it. I’ve heard of guys finding small metal shavings in theirs and needing to clean them out
@@unreviewed thanks for the advice. I believe the nozzle is fine. I do get right around 1000psi with the 4.5. I have a 5.0 but pressure drops under 1000psi. It’s got to be the make/brand of nozzle. Maybe OG Mosmatic is the way to go.
Not sure what dulution you used, but Sempre isn't designed to be used in a cannon. All you need is 1 capful in your bucket (1:800 dilution). The surfactants will clog up your coating if used more concentrated.
In the cannon I used 1:10 and the cannon adds another 1:10 so around 1:100.
I’ll check it out at a lesser dilution
First! Peace & Love.