Guys, thank you so much for this video. I bought a refurbished Optiplex 3050 and straight out replaced and installed dual drives (nvme m.2 and 2.5 ssd) and boot up can't find either drives. I successfully installed Win11 on it via usb boot and I wouldn't have been able to figure it out if it weren't for your video here. Thank you so much and much appreciated for the work and contents you put on your channel. Stay safe.
I was going to do a fresh installation of Windows 10 since I had no idea if there was an OS on either had drive. I found command prompt video to clean and partition the hdd's and had to do the same with a usb flash drive I was using as well
After first following instructions from another video and than running diagnostics test it show an "X" next to hard drive! I said to myself what do I do now? and what about my files (photos & videos)! this is so terribly bad. These problems always start when windows so call updates or up grades. In this case I was in the process of resetting windows 10 (with save files option). When followed your video and did the process again which had some things in reverse from the first video, it now show a check next to hard drive along with every thing else. Dell PC is now back in resetting mode but still at 88% where is was before the boot error notices . However it maybe working. I am 65 yrs old and don't know much about these systems. Thank You For your Help
If it shows the hard drive as failing in the diagnostic only once and the rest of time it passes the diagnostic. It could also be a sign that the hard drive is starting to fail and needs to be replaced.
@@EggheadFixers Thank You Again For Your Help Video. My Dell Inspiron 17 7779 in now working but some photos files were lost and some were duplicated. Having problems now with the Windows One Drive app. The problems with My PC always occurred right after Microsoft upgrades or updates? It just so happened that windows had just upgraded Microsoft Edge about a week ago and low and behold my PC stated to malfunction! As you suggested, down the road when I'm able to afford it I may have to replace the hard drive. This is so disappointing! By The Way, in BIOS under Boot Sequence where in your video it says "Windows Boot Manager" but in my page it says "UEFI: STIOOOL MO35 - IRKI72. Partition 1". Upon clicking on the "View" button to select "Windows Boot Manager" nothing happen, it did not respond and I could not change the setting? I should have mention this earlier because I think this may be important, If this can be corrected Please get back to me. Thank Your So Very Much
@@tbird10030 Yes updates can cause a whole bunch of problems. They are needed but if somethings going to go wrong often times its after an update:/ I wouldn't worry about the boot sequence sometimes different hard drives are listed differently in the boot sequence. It doesn't mean anything is wrong.
@@EggheadFixers Hi again, in reply to one of my questions earlier, you said "If it shows the hard drive as failing in the diagnostic only once and the rest of time it passes the diagnostic. It could also be a sign that the hard drive is starting to fail and needs to be replaced." Now the diagnostics for my Dell Inspiron 17 7779 is again showing an "X" next to hard drive and a test error code: 2000-0142. The funny thing is, after following your video my PC seems to be now running great despite the X next to hard drive and test error 2000-0142. It is booting faster, loading faster, it is no longer freezing up as if nothing was wrong. Latter on however I checked the wires connections inside the PC, I also disable the One Drive app which gave me problems and now the hard drive is again showing passing in diagnostics along with every thing else. Can't figure? Never the less, as you suggested, I am looking into replacing the HDD or add a SSD hard drive with old HDD. I notice there are two types of SSD for my PC. There is a small size like the one in your Dell shown in your video and the bigger one which looks the same size (2.5) and fit in the same place as the HDD inside my PC. Which is best and can I just install the smaller SSD together with the HDD still inside? Thanks Again For Your Videos and Help!
@@tbird10030 Yes you can install the smaller SSD as long as you have a port for it. You will have to set the SSD before the HDD on boot order so when you install the operating system it will boot off the correct drive. One benefit of doing it that way is you should be able to pull files off the HDD on to the SSD.
hello, thank you for sharing helpful info. A quick question, I did a system restore to previous point and for some reason now my dell powers up but nothing shows on display even when i hit/hold F2. All i did was a system restore to previous point with no other changes .plz share your thoughts
@@EggheadFixers thank you for reply, i've actually fixed the problem. All was needed is switching monitor connection from HDMI to VGA, i had to do a full system restore after but thats ok
Please help! I'm using the Dell venue 11 pro.. it does not have an attached keyboard and it shows no bootable device and the boot sequence is empty and in the under the boot list option its UEFI and the legacy is faded and is not an option....
@@EggheadFixers yes it worked and now the next problem started... 😔 My display is not responding it shows different colors red, green , white , black, blue and repeats it does not stop the power button is not responding too... It happened when i noticed that the volume down button was not working so i thought a small restart would fix it then the display went blank and the colours appeared... And i also waited for the battery to drain out and check it again after pluging in the power cable but nothing changed 😓😔
@@josiahsaji Sorry to hear that:( For that kind of problem I would try these two video: ua-cam.com/video/wY335MRKc3U/v-deo.html ua-cam.com/video/bZSz-jjexqM/v-deo.html
Well it said no boot devices after trying all these attempted possible solutions, tho I used USB to try and self repair but couldn't work with self repair, is there any commands to type into cmd to fix or repair it? I reckon there might be f but if not what other solutions could be provided for this error? I remember I fixed something like this last year but would really appreciate some help🙏
@@jpeg.600x2 If all the hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that: ua-cam.com/video/TElCJDbKdKk/v-deo.html You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
Thank you so much for you video! I did a Windows 10 update overnight and when i check my laptop the next day it said "no bootable device found". I was so worried as I'm not good with tech in the slightest and thought I'd ruined my laptop. Now it's fixed thanks to your guide. Thank you so much
QUESTION: I have a Dell Optiplex 390. Whenever I select UEFI, it tells me there is no bootable device available. Also, "Advanced Boot Options" is not available in the BIOS. So, there is no way to take any checkmark out of the "Legacy" option. Is there a way to update those BIOS or fix that? Also, when I select "UEFI," there is nothing to select for "Booting." I have heard Windows is supposed to take care of that. And the computer comes back with a message saying it tried to do that "Automatically." The computer tells me to select an option in UEFI and save the settings. The problem is there is nothing to select.I am using Windows 10 Pro. Can you please help me out. Is there any way to make it so this Dell Optiplex with the LGA 1155 A00 Motherboard can use an SSD with GPT UEFI? Or does this computer have to remain in MBR Legacy mode?
What happens when you run the diagnostic? Does it read the SSD as being there? Also does it pass the diagnostic? You may have to fix the setting then reinstall Windows. For Windows 10 to function properly it needs to be set on UEFI with secure boot on. As for the boot order Windows should do that automatically but in rare cases you may need to add your SSD as a boot option manually.
@@EggheadFixers I made sure the SSD was GPT when I cloned the MBR HDD. The PC "attempted" to load the UEFI features "Automatically" according to the computer. However, it would not work. I then selected the option to run the diagnostic. This was a UEFI type of graphic menu. The SSD and HDD were recognized, and so was the RAM and everything else. All of the features of the PC successfully passed the diagnostic test. Unfortunately, nothing would work. The SSD simply would not allow the SSD to boot up as long as the SSD was in GPT. As a result, I reformatted the SSD. I formatted it into MBR and cloned the HDD again. This time the SSD booted properly - but only in "Legacy" mode. Nothing would allow "UEFI" mode to be selected. The Dell Optiplex does not have the ability to choose "Advanced Options" or "Secure Boot" in the menu. You can choose "UEFI," but as a result of not having the ability to select "Advanced Options," you cannot select the option "Not" to run in "Legacy" mode. It seems as though the Dell Optiplex 390 with the LGA 1155 motherboard does not have the ability to boot a GPT HDD or SSD.
@@michaelzoran Ya it may incompatible. Also I believe with GPT HDD you need it to be set on UEFI so if you can only boot in legacy that is most likely your problem. What operating system are you trying to install?
FIRST WHEN I ON MY LAP TOP IT SHOWS SUPPORT ASSISTANT PRE BOOT SYSTEM PERFORMANCE CHECK AFTER CHECKING IT SHOWING NO BOOTABLE DEVICE FOUND HOW TO FIX IT I TRIED CHANGING ALL SETTINGS SHOWED IN UA-cam PLEASE HELP ME TO FIX IT
I would check your Windows logs to see if it is recording an error at the time it’s giving you the problem. You can access your Windows logs by going into File Explorer, right-clicking on this PC, clicking on manage, expanding the folder Event Viewer, and expanding the folder Windows Logs. I would check applications and the system and look at the date and time to see if there are any errors logged for when you were having the no sound issue. You are looking for errors that have a red or yellow symbol next to them. If you see one that fits the right time. Click on it and you can google the Event ID and source for solutions to this error.
Sorry to hear that☹ First I would try what we call reseating the hard drive which means unplugging it and then plugging it back in. Then rerun the diagnostic. If that does not work then its most likely that you need a new hard drive. Sometimes when a hard drive really dies the motherboard doesn't read it as being installed. Here is a video on how to replace your hard drive and install an operating system: ua-cam.com/video/TElCJDbKdKk/v-deo.html Let me know how it goes:)
It's great.... I'm working professional and suddenly facing this problem in my laptop... Watched so many videos but didn't work! You just made that simple... Just awesome 👌👍👍👍
This didn't work for me. I did everything that was on the video and still get the same error. Ran the diagnostics and it didn't find any hardware errors. I'm a little stuck now.
Sorry to hear that:( If all that hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that: ua-cam.com/video/TElCJDbKdKk/v-deo.html You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
Under Secure Boot Enable it gave me an error when trying to select Enabled, it gives error Secure Boot is not allowed if Legacy Option ROMs are enabled. Please help
Thanks so much, I have seen so many other videos and yours worked. I was trying to get Linux Mint to work. The change in the Sata Operation was key. I switched it to AHCI
First I would try what we call reseating the hard drive which means unplugging it and then plugging it back in. Then rerun the diagnostic. If that does not work then it's most likely that you need a new hard drive. Sometimes when a hard drive really dies the motherboard doesn't read it as being installed. Here is a video on how to replace your hard drive and install an operating system: Windows 10: ua-cam.com/video/TElCJDbKdKk/v-deo.html Windows 11: ua-cam.com/video/mNN9ssGCxig/v-deo.html Let me know how it goes:)
first, thanks for the video, but after all of this and passing all test, my dell inspiron 13 7000 series still boots straight to support assist saying no boot devices found. Any insight on this?
Sorry to hear that:( If you have already tried adjusting the settings in bios and it passed the test then you may need to reinstall the operating system. Sometimes Windows gets corrupt and you need to start from scratch with a fresh install of windows. Here is a video on how to do that: ua-cam.com/video/TElCJDbKdKk/v-deo.html You portion of the video that shows how to install a Hard Drive and just watch the second half on how to install windows. Let me know if you have anymore questions!
when i go to enable secure boot my pc says “Attention! Changing this setting may prevent your operating system from booting or require a reinstall. Are you sure you would like to continue?” i am afraid to continue because i think it means reinstall windows and i believe that would cost money and im broke lol
hello, i recently bought my dell inspiron 3650 used in november. in january, i started hearing squeaking noises coming from the pc. that was when i started getting errors that no hard drive was detected but then it continued to boot and work fine just a little slow. it started giving me boot loops that would last about 5 minutes saying it was diagnosing my pc and attempting repairs until eventually i couldnt boot it anymore. when it brought me to the automatic repair screen, i decided to reset it and remove all my files and i chose the option to reset if i was recycling the pc which i wasnt by accident. i finally took it apart and looked at the hard drive which i was 99% sure the problem was and i disconnected it and reconnected it but that didnt do anything so i took it back out and left it with my computer apart for a week or 2 just giving up on it. today, i decided to try one more time and i ran the diagnostic when you press F12 and it said everything was fine, including the hard drive. before that the bios said that there was no hard drive but after i did the diagnostic for 6 hours or so (the long one) i went back to bios and it showed my hard drive. this is where my problem is now... everything is functional according to the diagnostics i did. the hard drive is there and working. i still cannot boot up windows. it just brings me to the automatic repair screen and says that it didnt start correctly. please help. thank you
@@disastreee Sorry to hear that:( If all that hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that: ua-cam.com/video/TElCJDbKdKk/v-deo.html You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
Thank you so much for this and making me feel smart. Carried out the recovery drive usb instructions and was able to successfully reinstall windows and my hard drive that had a corrupt file and wouldn’t boot. Thanks a million
so I have an issue with my gaming desktop, basically it started flashing black screen and I couldn't game anymore, so I did a clean install of windows 10 and now am stuck in the Dell Boot Loop sadly and I'm wondering how to fix this if you know. thank you if so!
Bios will most likely look different but if you run into any options not being there just skip to the next step. Some of the older models Dell are set up more simple so you may not have all the extra options. They are also easier to work on so you have that on your side. Let me know if you have any questions:)
Hello. I have a problem. My usb mouse was broken and i had error “power surge on usb port damage”. After couple of this errors my Dell lagged and blue death screen appeared. I reload my laptop because of instant 0% - and then after restart black screen appeared with “no bootable device” error. With diagnostics on F5 i have problem “hard drive not installed”. Changing boot settings from Legacy to UEFI didn’t help. Is my hard drive dead, or it can be revived? Will be all my data gone? Or it can particularly saved? From D drive at least
If your Hard Drive failed the diagnostic then unfortunately you will need to replace it. Here is a video on how to replace your hard drive and install an operating system: Windows 10: ua-cam.com/video/TElCJDbKdKk/v-deo.html Windows 11: ua-cam.com/video/mNN9ssGCxig/v-deo.html If that hard drive is dead then sometimes you can try to hook it up to an external hard drive port and retrieve your data. This will only work if the hard drive is not to dead. Let me know how it goes:) Reply
Thank God that there r still people on this planet with a heart and everything about them isn't about a dollar u Miss win the heart of gold medal 🌷👍👏👏👏💯😚
Have you tried booting off it from the boot menu? This video shows you how to do that. you can skip the portion on installing a hard drive: ua-cam.com/video/TElCJDbKdKk/v-deo.html Also does it make a difference if you switch the setting in BIOS between UEFI with secure boot on then to legacy with secure boot off like it shows in this video?
If you deleted some necessary Windows files then you will need to reinstall the operating system. Here is a video on how to do that: ua-cam.com/video/TElCJDbKdKk/v-deo.html You can skip the portion of the video on how to install a hard drive.
If your Hard Drive failed the diagnostic then unfortunately you will need to replace it. Here is a video on how to replace your hard drive and install an operating system: Windows 10: ua-cam.com/video/TElCJDbKdKk/v-deo.html Windows 11: ua-cam.com/video/mNN9ssGCxig/v-deo.html Let me know how it goes:)
I was watching a lot of videos and couldn't understand them well, but you can explain it clearly. Thanks to you I did not go to the repairman for my computer you saved my day.Thanks a lot😉👍
Nothing is working for me. I tried this and all it does is just restart over and over again with only the dell logo and the loading bar. What can I do? I'm on windows 10.
Sorry to hear that:( Did your computer pass the diagnostic? If it did all pass have you tried reinstalling the operating system? Here is a video on how to do that: ua-cam.com/video/TElCJDbKdKk/v-deo.html You can skip the portion on how to install a new hard drive. Let me know if you have any more questions:)
@@EggheadFixers It did pass all of the diagnostics. I'm not sure if I should reinstall the operating system since this laptop isn't mine. I'll check the video out though
hey , i hope you are having a good day my problem is in UEFI mode when i try to add boot option it shows an error " system file not found " and i cant see my hard drive which has the windows file in it so i can select it as a boot device , what should i do ?
When I get to the boot sequence in the BIOS, where yours says windows boot manager, nothing shows for me and it is just blank. What should I do to fix it?
I ran through all the diagnostics and checked my BIOS settings, and I’m still getting the “No bootable devices found” error message. Am I going to need to replace something, or is there something else I can do?
@@EggheadFixers Yes, when I go into the advanced diagnostics, there are two hard drives listed. One is “Hard Drive 0-0-0”, and the other is “Hard Drive 0-0-1”. Both of them have a check mark next to them, and both of them pass tests when I run individual scans on them Edit: I fixed it! I just created another boot sequence and it works perfectly now. Thanks for taking the time out to help!
Hello. I have a latitude 7420 that my friend asked me to fix. I'm trying to boot the laptop and it keeps going into HTTPSBOOT: failed to initialize connection I saw your video about this going into bios and fixing the boot sequence so I went to check that and the only option showing is uefi https boot (placeholder) there is no other boot sequence options. Please help!! Also the admin password.. he gave me the password and wants it removed but how?
You should be able to remove the admin password in the BIOS settings. Usually, it's in the security options. Also what happens when you run the diagnostic? Does all your hardware pass?
I just bought a new hard drive because the BSOD was doing too much for me and after it showing I have no boot device I’ve ran the diagnostics and it passed but I can’t switch to UFEI because I have no “secure boot”. Any advice?
If all the hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that: ua-cam.com/video/TElCJDbKdKk/v-deo.html You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
Hi I don't have the same Bios setting, I cannot see Windows, but Onboard NIC IPV4 and I don't have advanced boot settings to enable the legacy thing.....
Hi! I followed the steps you showed but i was stucked on support assist, i can't tap anything and just shows that new usb device was installed. It was all started when my laptop started to auto update then i can't use the touch screen anymore. What will i do? Thank you in advance!
Hey I have a Latitude E5470 I was wondering if you could tell how to completely erase it. I would click F12 on the keyboard BUT I COULDN'T Really find out what to do next.
There are a couple of ways. You can use an external hard drive bay and plug it into another computer and wipe it from there. You can also use Windows installation software and delete all the contents of the drive and just not proceed to the installing windows portion or you can use software to wipe it.
It was clear and understandable but did not resolve my issue I have a Dell 15-3567 that i replaced the HD that I installed and boots to a basic desktop win 10 screen I have an image backup with incremental backups that was done automatically with an AOMEI back upper tool. onto an external HD. i created bootable WinPe bootable USB and an AOMEI Pe builder and tried to boot with both configurations with no luck. followed dells community ,AOMEI instructions, and Microsoft and many other suggestions, cannot boot this laptop to the USB any ideas?
How many GB is the USB? Sometimes if they are too small they will give you weird problems. Like for example Microsoft recommends an 8gb or larger USB for Windows installations but I always use a 16gb or larger. It just works better.
I have the same issue but mine doesn’t show windows boot manager in the corner it shows some other stuff also I can’t find advanced boot options what should I do?
I was trying to update my windows frm 10 to 11 on my dell laptop, it keeps stopping at 71% of step 3 of 3 installation, and my pc met all the requirements for windows 11 So I watched a video on UA-cam for solutions, the video made me delete some files from c drive after deleting those files my pc refuse to boot Any help pls I went to to c drive-windows-software distribution folder and deleted everything there I also went to c drive-windows-system32-cat root and deleted everything there I also went to cat root2 and deleted everything there after deleting the above mentioned my pc refused to boot up Pls is there anyway I can fix this or recover the above deleted in bios?? I also tried all what u did on dis video but same problem 😢😢
You may need to do a fresh install of Windows. Now that the upgrade failed halfway through. Although you will lose all your data. Here is the video on how to do that: Windows 10: ua-cam.com/video/TElCJDbKdKk/v-deo.html Windows 11: ua-cam.com/video/mNN9ssGCxig/v-deo.html
Hi Good Day, i am using a DELL INSPIRON aio 5400. The F12 for option to go to Diagnostic is Not appearing. I am currently encountering some booting Problem. I did follow the F2 instructions that you provide but going to F12 is a NOT Working. I hope that there's some help that you can Give. Thank you. Thank u
Hi, my dell latitude goes thru post and then blue screen with flashing line on upper left . screen.my battery is 25% on health according to f12 i removed.windows 10 pro still wont boot up .any ideas?? Tks
The computer needs to be started when the computer is completely off for it to work. You only have a short period of time to hit f2 and access BIOS. You have a Window of about 2-3 seconds. It can take several attempts to get it just right.
I have Dell Latitude E6400 it's not working 😢 ( the application or operating system couldn't be loaded because a required file is missing or contains errors) kindly how to fix it
Hi there I've just had a fresh SSD as the old one gave up, and I'm trying to do this but when I go into Boot Sequence I'm not seeing anything and when I click add boot option its not giving me any options either. The only option I have is installing windows 11 from my phone via an android lightning data cable, please help!
I have this same problem on my latitude E7240,the issue is when i get to bios am not able to change anything because the settings are locked by an admin password.I dont know the password since i got a second hand laptop i bought from somewhere,Can you advice how can somehow fix this problem
Please help. I can't boot up my dell g3 laptop because of the blue screen of death. So I watched some other guy's video to switch to legacy boot. But in order to turn on legacy boot I need to turn on legacy option rom which requires me to disable ptt. I did those things and I also enabled attempt legacy boot. After applying those settings I can't even go to the os settings anymore
I have a Dell e5430 non v-pro. whatever that means and it didn't work!!! Never went to bios set up hitting F2. Diagnostic test passed everything and still hard drive password problem!!
Thanks for your video I fixed all problems and installed win 10 pro the only issue is the black screen. It work only with an external monitor do you know what is the problem😢😢?
Usually when you have a black screen but it displays without a problem to a monitor, then it usually is an issue with the LCD (screen) or LCD cable. It can be a loose connection or that one of those two parts has gone bad. There are some rare cases where it's an issue with the port on the motherboard but that is very rare.
My setup shows Onboard NIC (IPV4) and Onboard NIC (IPV6) you did not clearly cover cases when it does not show "Windows Boot manager". But I still gave you a like :)
After I change secure boot My Dell icon disappear (blank/black screen) I can't enter to Bios as well My Device Dell 7447 4710hq. Have u any idea? Thank a lot
You may need to make sure the computer is al the way off to enter BIOS again. Turn the computer off and hold the power button down for ten seconds after. What happens when you run the diagnostic? Does everything pass?
can you help me? i only see ipv4 and ipv6 on the boot sequence and my boot list options is empty, no legacy and no UEFI. when i turn my PC on it says “no bootable devices found” i was wondering if you have a fix for this?
My laptop Dell G3 is stuck on the Dell black loading screen. My friend and I ran scans and repairs on BIOS bit and nothing has helped. I also don’t have a legacy option on my BIOS bit, not even and ‘advanced boot option’, any advise? 😢
Sorry to hear that:( If all the hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that: ua-cam.com/video/TElCJDbKdKk/v-deo.html You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
I bought a Dell Vostro 3670 computer that came with the Linux Exploitation system. When I entered Windows 10, it started to boot with the USB flash and would not open without it. How do I solve the problem please 🥺
If your Hard Drive failed the diagnostic then unfortunately you will need to replace it. Here is a video on how to replace your hard drive and install an operating system: ua-cam.com/video/TElCJDbKdKk/v-deo.html Let me know how it goes:)
my Dell precision t1700 Bios been corrupted and is unreadable(failure to POST) i tried to load a O.S with a flash drive and while switching to uefi safe move and restarting my computer no longer post. clearing cmos ,drain of power ,checking all ports monitors and cords dident fix the issue Computer was maybe interrupted during load(Cant remember but most likely).any help to fix my BIOS.
After I did the boot test it said that nothing was wrong with anything in the pc, however when I turn on the laptop the windows boot system says that something is wrong with the boot system
The system also claimed that there were no hardware issues. Next when it tried to boot it would show the dell logo and the screen would go black. This is repeating endlessly
@@elijahlewis7266 Sorry to hear that:( If all that hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with operating system. Here is a video on how to do that: ua-cam.com/video/TElCJDbKdKk/v-deo.html You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
For a desktop optiplex 990, After booting using win7, shows error and the status : 0xc0000023 (unexpected error has occured) ??? Pls give me the solution
Thanks! Solved my problem.
Glad to help!! And thank you so much for your support 😀
@@EggheadFixerscan you help me plssssssssssszssssssssssß
@EggheadFixers my laptop keeps saying no bootable device found in a dell laptop 7390
not worth it. Don't donate
Not working
Everyone please donate to her thank you
Thanks for the support!
Guys, thank you so much for this video. I bought a refurbished Optiplex 3050 and straight out replaced and installed dual drives (nvme m.2 and 2.5 ssd) and boot up can't find either drives. I successfully installed Win11 on it via usb boot and I wouldn't have been able to figure it out if it weren't for your video here. Thank you so much and much appreciated for the work and contents you put on your channel. Stay safe.
You are so very welcome! Glad we could help
Omgggg thank you so much...First ever in my lifetime I solved the problem in my lap with ur help❤
Glad to hear it helped!!
I was going to do a fresh installation of Windows 10 since I had no idea if there was an OS on either had drive. I found command prompt video to clean and partition the hdd's and had to do the same with a usb flash drive I was using as well
Ah, I see. Did it work?
Thank you so much
You are my new tech wiz😊
It really saved me money💰
Glad it helped!!
Thanx a lot. I worked perfectly, you saved my Dell😇
Glad to hear it!!
My problem is there’s no “Advanced boot settings” options. Legacy boot is not showing anywhere too. There’s only “Add boot” button but i have no idea
In that case you can skip to the next step in the video. What happens when you run the diagnostic?
After first following instructions from another video and than running diagnostics test it show an "X" next to hard drive! I said to myself what do I do now? and what about my files (photos & videos)! this is so terribly bad. These problems always start when windows so call updates or up grades. In this case I was in the process of resetting windows 10 (with save files option). When followed your video and did the process again which had some things in reverse from the first video, it now show a check next to hard drive along with every thing else. Dell PC is now back in resetting mode but still at 88% where is was before the boot error notices . However it maybe working. I am 65 yrs old and don't know much about these systems. Thank You For your Help
If it shows the hard drive as failing in the diagnostic only once and the rest of time it passes the diagnostic. It could also be a sign that the hard drive is starting to fail and needs to be replaced.
@@EggheadFixers Thank You Again For Your Help Video. My Dell Inspiron 17 7779 in now working but some photos files were lost and some were duplicated. Having problems now with the Windows One Drive app. The problems with My PC always occurred right after Microsoft upgrades or updates? It just so happened that windows had just upgraded Microsoft Edge about a week ago and low and behold my PC stated to malfunction! As you suggested, down the road when I'm able to afford it I may have to replace the hard drive. This is so disappointing! By The Way, in BIOS under Boot Sequence where in your video it says "Windows Boot Manager" but in my page it says "UEFI: STIOOOL MO35 - IRKI72. Partition 1". Upon clicking on the "View" button to select "Windows Boot Manager" nothing happen, it did not respond and I could not change the setting? I should have mention this earlier because I think this may be important, If this can be corrected Please get back to me. Thank Your So Very Much
@@tbird10030 Yes updates can cause a whole bunch of problems. They are needed but if somethings going to go wrong often times its after an update:/ I wouldn't worry about the boot sequence sometimes different hard drives are listed differently in the boot sequence. It doesn't mean anything is wrong.
@@EggheadFixers Hi again, in reply to one of my questions earlier, you said "If it shows the hard drive as failing in the diagnostic only once and the rest of time it passes the diagnostic. It could also be a sign that the hard drive is starting to fail and needs to be replaced." Now the diagnostics for my Dell Inspiron 17 7779 is again showing an "X" next to hard drive and a test error code: 2000-0142. The funny thing is, after following your video my PC seems to be now running great despite the X next to hard drive and test error 2000-0142. It is booting faster, loading faster, it is no longer freezing up as if nothing was wrong. Latter on however I checked the wires connections inside the PC, I also disable the One Drive app which gave me problems and now the hard drive is again showing passing in diagnostics along with every thing else. Can't figure? Never the less, as you suggested, I am looking into replacing the HDD or add a SSD hard drive with old HDD. I notice there are two types of SSD for my PC. There is a small size like the one in your Dell shown in your video and the bigger one which looks the same size (2.5) and fit in the same place as the HDD inside my PC. Which is best and can I just install the smaller SSD together with the HDD still inside? Thanks Again For Your Videos and Help!
@@tbird10030 Yes you can install the smaller SSD as long as you have a port for it. You will have to set the SSD before the HDD on boot order so when you install the operating system it will boot off the correct drive. One benefit of doing it that way is you should be able to pull files off the HDD on to the SSD.
I don't have the option for legacy mode. What should I do??
Not a problem. You can just skip to the next step in the video. What happens when you run the diagnostic? Does everything pass?
hello, thank you for sharing helpful info. A quick question, I did a system restore to previous point and for some reason now my dell powers up but nothing shows on display even when i hit/hold F2. All i did was a system restore to previous point with no other changes .plz share your thoughts
When you say nothing shows does it show the Dell logo and then it goes to a blank screen? Or does turn on and display nothing at all?
@@EggheadFixers thank you for reply, i've actually fixed the problem. All was needed is switching monitor connection from HDMI to VGA, i had to do a full system restore after but thats ok
@@Mike-rf8ph Glad to hear it worked out
Thank you so much ❤
You're welcome!
Please help! I'm using the Dell venue 11 pro.. it does not have an attached keyboard and it shows no bootable device and the boot sequence is empty and in the under the boot list option its UEFI and the legacy is faded and is not an option....
Could be a problem with your hard drive.....Does everything pass the diagnostic?
@@EggheadFixers yes it worked and now the next problem started... 😔 My display is not responding it shows different colors red, green , white , black, blue and repeats it does not stop the power button is not responding too... It happened when i noticed that the volume down button was not working so i thought a small restart would fix it then the display went blank and the colours appeared... And i also waited for the battery to drain out and check it again after pluging in the power cable but nothing changed 😓😔
@@josiahsaji Sorry to hear that:( For that kind of problem I would try these two video:
ua-cam.com/video/wY335MRKc3U/v-deo.html
ua-cam.com/video/bZSz-jjexqM/v-deo.html
Can you help me. My new brother laptop is on bootloop and i tried everything but not working. There was a problem and its
The battery
It tells me the battery is reaching the end of its usable life . Continue? And (yes-no-retry)
@@ABOD-un2zm Yes continue the diagnostic until it completes.
Thank you so much!! ❤❤❤
You're welcome!!
Well it said no boot devices after trying all these attempted possible solutions, tho I used USB to try and self repair but couldn't work with self repair, is there any commands to type into cmd to fix or repair it? I reckon there might be f
but if not what other solutions could be provided for this error? I remember I fixed something like this last year but would really appreciate some help🙏
It depends...When you run the diagnostic like in the video does all your hardware pass?
@@EggheadFixers yes it does👍
@@jpeg.600x2 If all the hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
@@EggheadFixers ima see if I can refix the files with a Hiren live USB os tool
@@jpeg.600x2 okay, let us know how it goes 👍
You was a great help! I went to two other channels and between all three, you included, I managed to boot my system again. Thanks a whole lot.
You are welcome!
Thank you so much for you video! I did a Windows 10 update overnight and when i check my laptop the next day it said "no bootable device found". I was so worried as I'm not good with tech in the slightest and thought I'd ruined my laptop. Now it's fixed thanks to your guide. Thank you so much
Awesome!! Happy to hear it helped:)
So what worked?
Thanks so much for sharing your knowledge! I was able to reboot my Dell laptop after watching your video! Brillant!!
Excellent!
Thanks so much! I was trying to convert it from Legacy to UEFI and I got this error when I started my computer back up. I fixed it with your video! 🙏🙂
That's fantastic!! Glad we could help:)
That's fantastic!! Glad we could help:)
My legacy mode is disabled
Thank you so much I've been struggling with this for weeks and the beginning fixed it thank you
Awesome!!
QUESTION: I have a Dell Optiplex 390. Whenever I select UEFI, it tells me there is no bootable device available. Also, "Advanced Boot Options" is not available in the BIOS. So, there is no way to take any checkmark out of the "Legacy" option. Is there a way to update those BIOS or fix that? Also, when I select "UEFI," there is nothing to select for "Booting." I have heard Windows is supposed to take care of that. And the computer comes back with a message saying it tried to do that "Automatically." The computer tells me to select an option in UEFI and save the settings. The problem is there is nothing to select.I am using Windows 10 Pro. Can you please help me out. Is there any way to make it so this Dell Optiplex with the LGA 1155 A00 Motherboard can use an SSD with GPT UEFI? Or does this computer have to remain in MBR Legacy mode?
What happens when you run the diagnostic? Does it read the SSD as being there? Also does it pass the diagnostic? You may have to fix the setting then reinstall Windows. For Windows 10 to function properly it needs to be set on UEFI with secure boot on. As for the boot order Windows should do that automatically but in rare cases you may need to add your SSD as a boot option manually.
@@EggheadFixers I made sure the SSD was GPT when I cloned the MBR HDD. The PC "attempted" to load the UEFI features "Automatically" according to the computer. However, it would not work.
I then selected the option to run the diagnostic. This was a UEFI type of graphic menu. The SSD and HDD were recognized, and so was the RAM and everything else. All of the features of the PC successfully passed the diagnostic test.
Unfortunately, nothing would work. The SSD simply would not allow the SSD to boot up as long as the SSD was in GPT.
As a result, I reformatted the SSD. I formatted it into MBR and cloned the HDD again. This time the SSD booted properly - but only in "Legacy" mode. Nothing would allow "UEFI" mode to be selected.
The Dell Optiplex does not have the ability to choose "Advanced Options" or "Secure Boot" in the menu. You can choose "UEFI," but as a result of not having the ability to select "Advanced Options," you cannot select the option "Not" to run in "Legacy" mode.
It seems as though the Dell Optiplex 390 with the LGA 1155 motherboard does not have the ability to boot a GPT HDD or SSD.
@@michaelzoran Ya it may incompatible. Also I believe with GPT HDD you need it to be set on UEFI so if you can only boot in legacy that is most likely your problem. What operating system are you trying to install?
@@EggheadFixers Windows 10 Pro was cloned over to the SSD.
@@michaelzoran Ya if its Windows 10 Pro then it definitely needs to be set on UEFI.
Thank you so much!! I was freaking out when i kept hitting the key and the error message kept coming up!
Glad we could help:)
FIRST WHEN I ON MY LAP TOP IT SHOWS SUPPORT ASSISTANT PRE BOOT SYSTEM PERFORMANCE CHECK AFTER CHECKING IT SHOWING NO BOOTABLE DEVICE FOUND HOW TO FIX IT I TRIED CHANGING ALL SETTINGS SHOWED IN UA-cam PLEASE HELP ME TO FIX IT
What happens when you run the diagnostic? Does everything pass?
My laptop just keeps turning off after a certain amount of being on… I’ll do a few of these moves then off
I would check your Windows logs to see if it is recording an error at the time it’s giving you the
problem. You can access your Windows logs by going into File Explorer, right-clicking on this PC,
clicking on manage, expanding the folder Event Viewer, and expanding the folder Windows Logs. I
would check applications and the system and look at the date and time to see if there are any errors
logged for when you were having the no sound issue. You are looking for errors that have a red or
yellow symbol next to them. If you see one that fits the right time. Click on it and you can google the
Event ID and source for solutions to this error.
After 'diagnostic' the result is 'msg: hard drive- not installed' what next, Miss? Help me, please.
Sorry to hear that☹ First I would try what we call reseating the hard drive which means unplugging it and then plugging it back in. Then rerun the diagnostic. If that does not work then its most likely that you need a new hard drive. Sometimes when a hard drive really dies the motherboard doesn't read it as being installed. Here is a video on how to replace your hard drive and install an operating system:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
Let me know how it goes:)
It's great.... I'm working professional and suddenly facing this problem in my laptop... Watched so many videos but didn't work! You just made that simple... Just awesome 👌👍👍👍
Thanks!! Happy to hear it helped!!
Jeezz!!!
It worked!!!😫😭😭
Finally..
Thank you so so so so so muchhh!!!
You are so very welcome!!
I really cannot thank you enough, this was really helpful. THANK YOU 🙏 😊
You're welcome
Thank you so much! After 2 days of 0 sucess, I was finally able to bring my computer back from death! 😅😉
haha glad to hear it!
straight to the point and very helpful. Thanks! you helped me alot
You're welcome
My memory is a x do i have to replace it
Windows is installed, but boot devices are not found even after all appropriate settings are done in BIOS
Any solutions? Dell g7, Windows 10pro
What does it say when you run the diagnostic? Does all your hardware pass?
Thank you for this. Saved me a lot of time and money. Cheers!
You're welcome!! Happy to help:)
This didn't work for me. I did everything that was on the video and still get the same error. Ran the diagnostics and it didn't find any hardware errors. I'm a little stuck now.
Sorry to hear that:( If all that hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
Under Secure Boot Enable it gave me an error when trying to select Enabled, it gives error Secure Boot is not allowed if Legacy Option ROMs are enabled.
Please help
@@Nandasmith9899 so go to advanced boot options and off it then u will be able to do it
@@ansoooon thank you
Thank you so so much for fixing with such quick and easy fix, indeed we saved tons of money
Happy to help
Thanks so much, I have seen so many other videos and yours worked. I was trying to get Linux Mint to work. The change in the Sata Operation was key. I switched it to AHCI
Glad to hear it helped!!!
my hard disk was detected in bios setting but in diagnostics it shows my hard disk not available . my system is not booting help me sister..
First I would try what we call reseating the hard drive which means unplugging it and then plugging it back in. Then rerun the diagnostic. If that does not work then it's most likely that you need a new hard drive. Sometimes when a hard drive really dies the motherboard doesn't read it as being installed. Here is a video on how to replace your hard drive and install an operating system:
Windows 10:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
Windows 11:
ua-cam.com/video/mNN9ssGCxig/v-deo.html
Let me know how it goes:)
@@EggheadFixers thank you sister
@@rovinrichard9838 You're welcome!!
first, thanks for the video, but after all of this and passing all test, my dell inspiron 13 7000 series still boots straight to support assist saying no boot devices found. Any insight on this?
Sorry to hear that:( If you have already tried adjusting the settings in bios and it passed the test then you may need to reinstall the operating system. Sometimes Windows gets corrupt and you need to start from scratch with a fresh install of windows. Here is a video on how to do that:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
You portion of the video that shows how to install a Hard Drive and just watch the second half on how to install windows. Let me know if you have anymore questions!
when i go to enable secure boot my pc says “Attention! Changing this setting may prevent your operating system from booting or require a reinstall. Are you sure you would like to continue?” i am afraid to continue because i think it means reinstall windows and i believe that would cost money and im broke lol
If you worried about it then you skip to the next portion of the video. What happens when you run the diagnostic? Does everything pass?
@@EggheadFixers yes. everything passes but im still really confused
hello,
i recently bought my dell inspiron 3650 used in november. in january, i started hearing squeaking noises coming from the pc. that was when i started getting errors that no hard drive was detected but then it continued to boot and work fine just a little slow. it started giving me boot loops that would last about 5 minutes saying it was diagnosing my pc and attempting repairs until eventually i couldnt boot it anymore. when it brought me to the automatic repair screen, i decided to reset it and remove all my files and i chose the option to reset if i was recycling the pc which i wasnt by accident. i finally took it apart and looked at the hard drive which i was 99% sure the problem was and i disconnected it and reconnected it but that didnt do anything so i took it back out and left it with my computer apart for a week or 2 just giving up on it. today, i decided to try one more time and i ran the diagnostic when you press F12 and it said everything was fine, including the hard drive. before that the bios said that there was no hard drive but after i did the diagnostic for 6 hours or so (the long one) i went back to bios and it showed my hard drive. this is where my problem is now... everything is functional according to the diagnostics i did. the hard drive is there and working. i still cannot boot up windows. it just brings me to the automatic repair screen and says that it didnt start correctly. please help. thank you
@@EggheadFixers everything passes but im still stuck on the automatic repair loop. none of the options worked ive tried all of them multiple times.
@@disastreee Sorry to hear that:( If all that hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
I’ve been hitting the F2 button for like half an hour help 😭
Maybe go to the screen it usually begins at were it tells u no boot device found or whatever and click f2 once
Trying hitting F12 at startup and then selecting setup. Also make sure you hitting the function key as soon as you hit power. Let me now how it goes:)
@@Tiffany-jk4vl Good suggestion!!
did you press the power button first lol
You're welcome:)
OMG THANK YOU SO MUCH YOU’RE A LIFE SAVER!!! I freaked out when I had this problem!
You're welcome!!
Thank you so much for this and making me feel smart. Carried out the recovery drive usb instructions and was able to successfully reinstall windows and my hard drive that had a corrupt file and wouldn’t boot. Thanks a million
Excellent!!! Good job👍 Glad we could help🙂
Thank you!
This was very helpful. I had no idea that having legacy boot mode on would cause such an issue. Lesson learned 😆
Glad it helped!
Thank you! I couldn’t have gotten into my pc without you.
Awesome!! Happy to hear it:)
so I have an issue with my gaming desktop, basically it started flashing black screen and I couldn't game anymore, so I did a clean install of windows 10 and now am stuck in the Dell Boot Loop sadly and I'm wondering how to fix this if you know. thank you if so!
What happened when you ran the diagnostic like you see in the video? Does all your hardware pass?
"Didn't work for me.
But still, it was a good video.
And I see it has solved the problem for a lot of people.
So yeah, tnx :)
I have an older PC, do you have any tips for that? (Inspiron 15)
Bios will most likely look different but if you run into any options not being there just skip to the next step. Some of the older models Dell are set up more simple so you may not have all the extra options. They are also easier to work on so you have that on your side. Let me know if you have any questions:)
I cant tell how much happy i am. All working fine. I was unable to use bitlocker key. Just because os sata issue. Thankyou
no prob!! Happy it helped:)
Thank you so much, I thought I had a hardware related problem but it turns out it was as simple as this. Appreciate the help!
Glad it helped!
Hello. I have a problem. My usb mouse was broken and i had error “power surge on usb port damage”. After couple of this errors my Dell lagged and blue death screen appeared. I reload my laptop because of instant 0% - and then after restart black screen appeared with “no bootable device” error.
With diagnostics on F5 i have problem “hard drive not installed”. Changing boot settings from Legacy to UEFI didn’t help.
Is my hard drive dead, or it can be revived? Will be all my data gone? Or it can particularly saved? From D drive at least
If your Hard Drive failed the diagnostic then unfortunately you will need to replace it. Here is a video on how to replace your hard drive and install an operating system:
Windows 10:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
Windows 11:
ua-cam.com/video/mNN9ssGCxig/v-deo.html
If that hard drive is dead then sometimes you can try to hook it up to an external hard drive port and retrieve your data. This will only work if the hard drive is not to dead. Let me know how it goes:)
Reply
THANK YOU SO MUCH
I spent over three hours trying to find a solution and I saw your video and it worked thank you
You're welcome!!!
Thank God that there r still people on this planet with a heart and everything about them isn't about a dollar u Miss win the heart of gold medal 🌷👍👏👏👏💯😚
Thanks😃
When I plugin usb , it says no boot devices found. How does installing windows 10 could help if it couldn’t find the boot devices ?
Have you tried booting off it from the boot menu? This video shows you how to do that. you can skip the portion on installing a hard drive:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
Also does it make a difference if you switch the setting in BIOS between UEFI with secure boot on then to legacy with secure boot off like it shows in this video?
Did u figure it out?
I can't seem to enable secure boot cause it says Secure boot is not allowed if the system is in Legacy boot mode :(
Then skip to the next step in the video...What happens when you run the diagnostic? Does everything pass?
@@EggheadFixers I tried it again and it worked! Thank you!
@@jiro4486 Excellent!! 😃👍
Ey um my system is still not working properly by a mistake I delete all the boot files will any chance to work advise really neede
If you deleted some necessary Windows files then you will need to reinstall the operating system. Here is a video on how to do that:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
You can skip the portion of the video on how to install a hard drive.
@@EggheadFixers I don't get tht install screen
@@ValkRblx When you are trying to install Windows?
Hey my Hard Drive is error and it's Notify on the screen (critical error message
Version BD 2.53 Service Tag B376N63
Error code:2000-0151)
If your Hard Drive failed the diagnostic then unfortunately you will need to replace it. Here is a video on how to replace your hard drive and install an operating system:
Windows 10:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
Windows 11:
ua-cam.com/video/mNN9ssGCxig/v-deo.html
Let me know how it goes:)
I was watching a lot of videos and couldn't understand them well, but you can explain it clearly. Thanks to you I did not go to the repairman for my computer you saved my day.Thanks a lot😉👍
Glad to hear it 🙂👍
Nothing is working for me. I tried this and all it does is just restart over and over again with only the dell logo and the loading bar. What can I do? I'm on windows 10.
Sorry to hear that:( Did your computer pass the diagnostic? If it did all pass have you tried reinstalling the operating system?
Here is a video on how to do that:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
You can skip the portion on how to install a new hard drive. Let me know if you have any more questions:)
@@EggheadFixers It did pass all of the diagnostics. I'm not sure if I should reinstall the operating system since this laptop isn't mine. I'll check the video out though
@@trzr3479 Ok sounds good:)
@@EggheadFixers I fixed it thanks to your video! Thank you very very much!!!
@@EggheadFixers I've been trying for 2 days to fix it and finally yours works. Thank you so much!
hey , i hope you are having a good day
my problem is in UEFI mode when i try to add boot option it shows an error " system file not found " and i cant see my hard drive which has the windows file in it so i can select it as a boot device , what should i do ?
Sorry to hear that:/ When you run the diagnostic does the hard pass?
1:00
Hi, my laptop doesn't have the secure boot option. Can you please help?
In that case you can skip to the next step in the video. What happens when you run the diagnostic?
When I get to the boot sequence in the BIOS, where yours says windows boot manager, nothing shows for me and it is just blank. What should I do to fix it?
Ya it should show your hard drive on that list. What happens when you run the diagnostic? Does everything pass?
I ran through all the diagnostics and checked my BIOS settings, and I’m still getting the “No bootable devices found” error message. Am I going to need to replace something, or is there something else I can do?
Did all your hardware pass the diagnostic? Did it show the hard drive as being installed in the diagnostic?
@@EggheadFixers Yes, when I go into the advanced diagnostics, there are two hard drives listed. One is “Hard Drive 0-0-0”, and the other is “Hard Drive 0-0-1”. Both of them have a check mark next to them, and both of them pass tests when I run individual scans on them
Edit: I fixed it! I just created another boot sequence and it works perfectly now. Thanks for taking the time out to help!
@@docdapper Excellent!! Good job troubleshooting!!
This was a real livesaver, just bought a 9020 sff and this really helped.
Happy to hear it helped!!!
Hello.
I have a latitude 7420 that my friend asked me to fix. I'm trying to boot the laptop and it keeps going into HTTPSBOOT: failed to initialize connection
I saw your video about this going into bios and fixing the boot sequence so I went to check that and the only option showing is uefi https boot (placeholder) there is no other boot sequence options.
Please help!!
Also the admin password.. he gave me the password and wants it removed but how?
You should be able to remove the admin password in the BIOS settings. Usually, it's in the security options. Also what happens when you run the diagnostic? Does all your hardware pass?
I just bought a new hard drive because the BSOD was doing too much for me and after it showing I have no boot device I’ve ran the diagnostics and it passed but I can’t switch to UFEI because I have no “secure boot”. Any advice?
If all the hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
Hi I don't have the same Bios setting, I cannot see Windows, but Onboard NIC IPV4 and I don't have advanced boot settings to enable the legacy thing.....
In that case, you can skip to the next step in the video. What happens when you run the diagnostic?
My screen didn’t look like this. Looked like in DOS.
Me too only disable and enable in advance setting
Not like that list
I have a issue, my laptop is a DELL Latitude 5480, and i do not see the option for windows boot manager. What do i need to do to solve this issue?
You may need to reinstall Windows. What happens when you run the diagnostic? Does everything pass?
Hi! I followed the steps you showed but i was stucked on support assist, i can't tap anything and just shows that new usb device was installed. It was all started when my laptop started to auto update then i can't use the touch screen anymore. What will i do? Thank you in advance!
Were you able to run the diagnostic at all?
Hey I have a Latitude E5470 I was wondering if you could tell how to completely erase it. I would click F12 on the keyboard BUT I COULDN'T Really find out what to do next.
There are a couple of ways. You can use an external hard drive bay and plug it into another computer and wipe it from there. You can also use Windows installation software and delete all the contents of the drive and just not proceed to the installing windows portion or you can use software to wipe it.
It was clear and understandable but did not resolve my issue
I have a Dell 15-3567 that i replaced the HD
that I installed and boots to a basic desktop win 10 screen
I have an image backup with incremental backups that was done automatically with an AOMEI back upper tool. onto an external HD.
i created bootable WinPe bootable USB and an AOMEI Pe builder and tried to boot with both configurations with no luck. followed dells community ,AOMEI instructions, and Microsoft and many other suggestions, cannot boot this laptop to the USB
any ideas?
How many GB is the USB? Sometimes if they are too small they will give you weird problems. Like for example Microsoft recommends an 8gb or larger USB for Windows installations but I always use a 16gb or larger. It just works better.
I have the same issue but mine doesn’t show windows boot manager in the corner it shows some other stuff also I can’t find advanced boot options what should I do?
In that case, you can skip to the next step in the video. What happens when you run the diagnostic?
I was trying to update my windows frm 10 to 11 on my dell laptop, it keeps stopping at 71% of step 3 of 3 installation, and my pc met all the requirements for windows 11
So I watched a video on UA-cam for solutions, the video made me delete some files from c drive after deleting those files my pc refuse to boot
Any help pls
I went to to c drive-windows-software distribution folder and deleted everything there
I also went to c drive-windows-system32-cat root and deleted everything there I also went to cat root2 and deleted everything there after deleting the above mentioned my pc refused to boot up
Pls is there anyway I can fix this or recover the above deleted in bios??
I also tried all what u did on dis video but same problem 😢😢
You may need to do a fresh install of Windows. Now that the upgrade failed halfway through. Although you will lose all your data. Here is the video on how to do that:
Windows 10:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
Windows 11:
ua-cam.com/video/mNN9ssGCxig/v-deo.html
Hi Good Day, i am using a DELL INSPIRON aio 5400. The F12 for option to go to Diagnostic is Not appearing.
I am currently encountering some booting Problem. I did follow the F2 instructions that you provide but going to F12 is a NOT Working.
I hope that there's some help that you can Give. Thank you.
Thank u
Have you tried hooking a keyboard up to it? It could be a problem with the F12 key.
Hi, my dell latitude goes thru post and then blue screen with flashing line on upper left . screen.my battery is 25% on health according to f12 i removed.windows 10 pro still wont boot up .any ideas?? Tks
Does the blue screen have an error code? Or does it just glow blue?
have a Latitude d620.Used .system is lock.who would be admin to unlock system? to get boot sequence.
You would need to get that admin password from whoever set it up.
I did the same but it say no bootable device found
I put ACHI, RAID and disabled but nothing worked.
What happened when you ran the diagnostic? Did everything pass?
Every time I spam F12 it doesn't work and it only says "preparing one-time boot menu" then doesn't work after
The computer needs to be started when the computer is completely off for it to work. You only have a short period of time to hit f2 and access BIOS. You have a Window of about 2-3 seconds. It can take several attempts to get it just right.
Omg! Thank you very much.
Wasted 2 working days on this issue.😊😊😊🎉
Glad it helped!!
I have Dell Latitude E6400 it's not working 😢 ( the application or operating system couldn't be loaded because a required file is missing or contains errors) kindly how to fix it
Sound like you need to reinstall the operating system. Which operating system is your computer running?
It did fix the problem of bootlooping but now when I enter onto the desktop it immediately shuts down. Any idea as to why?
You may need to reinstall the operating system. Also what happened when you ran the diagnostic? DId the hard drive pass?
Hi there I've just had a fresh SSD as the old one gave up, and I'm trying to do this but when I go into Boot Sequence I'm not seeing anything and when I click add boot option its not giving me any options either. The only option I have is installing windows 11 from my phone via an android lightning data cable, please help!
Are you trying to add the boot option in BIOS? Because often time the SSD will not show up in BIOS before you install the operating system.
Initializing Intel(R) Boot Agent GE v1.5.50 PXE 2.1 Build 092 (WfM 2.0)
It won’t enter bios using F2
Do you have a video solution for this error?
Can you access BIOS if you go through the boot menu?
I have this same problem on my latitude E7240,the issue is when i get to bios am not able to change anything because the settings are locked by an admin password.I dont know the password since i got a second hand laptop i bought from somewhere,Can you advice how can somehow fix this problem
Most of the time you can call into the laptops manufacturer's support line and they can give you an access code to get in and change it.
Please help. I can't boot up my dell g3 laptop because of the blue screen of death. So I watched some other guy's video to switch to legacy boot. But in order to turn on legacy boot I need to turn on legacy option rom which requires me to disable ptt. I did those things and I also enabled attempt legacy boot. After applying those settings I can't even go to the os settings anymore
Sorry to hear that. Were you able to run the diagnostic? Did everything pass?
I have a Dell e5430 non v-pro. whatever that means and it didn't work!!! Never went to bios set up hitting F2. Diagnostic test passed everything and still hard drive password problem!!
So is the problem that your computer is saying no bootable device? Or is the problem that you can't get beyond the password for your hard drive?
Thanks for your video I fixed all problems and installed win 10 pro the only issue is the black screen. It work only with an external monitor do you know what is the problem😢😢?
Usually when you have a black screen but it displays without a problem to a monitor, then it usually is an issue with the LCD (screen) or LCD cable. It can be a loose connection or that one of those two parts has gone bad. There are some rare cases where it's an issue with the port on the motherboard but that is very rare.
My setup shows Onboard NIC (IPV4) and Onboard NIC (IPV6) you did not clearly cover cases when it does not show "Windows Boot manager". But I still gave you a like :)
When it does not show Windows boot manager then you can skip to the diagnostic. Thanks
When I change from Legacy to UEFI, there is absolutely nothing in the Boot Sequence section. Dell OptiPlex 3040. Thanks in advance!
In that case you can leave the settings on legacy and skip to the next step in the video. What happens when you run the diagnostic?
After I change secure boot
My Dell icon disappear (blank/black screen)
I can't enter to Bios as well
My Device Dell 7447 4710hq.
Have u any idea?
Thank a lot
You may need to make sure the computer is al the way off to enter BIOS again. Turn the computer off and hold the power button down for ten seconds after. What happens when you run the diagnostic? Does everything pass?
can you help me? i only see ipv4 and ipv6 on the boot sequence and my boot list options is empty, no legacy and no UEFI. when i turn my PC on it says “no bootable devices found” i was wondering if you have a fix for this?
Sorry to hear that:/ What happens when you run the diagnostic? Does everything pass?
Wow thank you very much. I tried everything and nothing worked. And 1 minute and 45 seconds into this video all my problems went away. Thank you
You're welcome!!
My laptop Dell G3 is stuck on the Dell black loading screen. My friend and I ran scans and repairs on BIOS bit and nothing has helped. I also don’t have a legacy option on my BIOS bit, not even and ‘advanced boot option’, any advise? 😢
Sorry to hear that:( If all the hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with the operating system. Here is a video on how to do that:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
I bought a Dell Vostro 3670 computer that came with the Linux Exploitation system. When I entered Windows 10, it started to boot with the USB flash and would not open without it. How do I solve the problem please 🥺
I'm not sure that I am understanding you correctly...Are you trying to install Windows 10 and it will not boot off the USB?
Not working :( there's no hdd found on the list. but if i pluged the bootable usb. it works :(
If your Hard Drive failed the diagnostic then unfortunately you will need to replace it. Here is a video on how to replace your hard drive and install an operating system:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
Let me know how it goes:)
my Dell precision t1700 Bios been corrupted and is unreadable(failure to POST) i tried to load a O.S with a flash drive and while switching to uefi safe move and restarting my computer no longer post. clearing cmos ,drain of power ,checking all ports monitors and cords dident fix the issue Computer was maybe interrupted during load(Cant remember but most likely).any help to fix my BIOS.
Have you tried flashing BIOS? If that doesn't work then you may need to replace the motherboard all together.
@@EggheadFixers dont know how to flash this bios
@@EggheadFixers if i send the motherboard model could you tell me what to buy so i can flash it with the name of the spot to do it?
After I did the boot test it said that nothing was wrong with anything in the pc, however when I turn on the laptop the windows boot system says that something is wrong with the boot system
The system also claimed that there were no hardware issues. Next when it tried to boot it would show the dell logo and the screen would go black. This is repeating endlessly
@@elijahlewis7266 Sorry to hear that:( If all that hardware passed the diagnostic then the next step would be to try reinstalling the operating system. Usually this problem is caused by a problem with operating system. Here is a video on how to do that:
ua-cam.com/video/TElCJDbKdKk/v-deo.html
You can skip the part of the video about replacing your hard drive. Let me know if you have any more questions:)
thank you so much I unable to go to technician at all save money 💟💟💟💟💟💟💟💟
Glad to help save 💰
For a desktop optiplex 990,
After booting using win7, shows error and the status : 0xc0000023 (unexpected error has occured)
??? Pls give me the solution
What happens when you run the diagnostic as shown in the video? Does everything pass?