CZ Shadow 2 Failure to Extract FIX
Вставка
- Опубліковано 15 вер 2024
- This is how I solved my failure to extract issues on my CZ Shadow 2.
Fix 1 Was enough, Fix 2 was for precaution.
S2 Specs:
CZ Shadow 2 OR Blue
Trijicon SRO 5
Full @cajungunworks526 Pro Kit
@armorycraft9392 Trigger
@Lokgrips Brass
11lb Recoil Spring
13lb Hammer Spring
Nice bro! I occasionally have this issue too. I was using sport pistol and 125 grain Blues but now i use 124 grain Armscor FMJ and it happens a little less. I will definitely give this a shot though.
Yeah it definitely seems like the poly coated burn off is a lot messier. And if you don’t keep that chamber shiny it’ll just get worse and worse!
Nice job, did you measure it with calipers before and after?
Yes, And mic’d. Verified CMM tools I use in 5 axis aerospace machining.
I just got a brand new Shadow 2 and I've already had this very issue happen once, under 200 rounds.
I would start with reaming the barrel and polishing out the chamber. Get rid of the black nitride that is in there.
Secondly I would either shave .2mm off the contact face of the extractor to give it more bite, or take 1 coil off an extra powered extractor spring and use that. There’s a few options, no clear one that rules them all but at least there are solutions. Sorry that’s happening so soon my friend