Veto ProPac DR - LC Drill Bag Review & Load Out!
Вставка
- Опубліковано 18 лют 2021
- A Good Look at what the DR LC Drill Bag from Veto Pro Pac will actually hold. We loaded this out back in November and have really enjoyed using it for all our drill or impact related work on the jobsites since then. We pretty much just loaded the drill, impact and a few bits in the dewalt boxes and then let the bag load itself as we used it to see what we actually would want in a bag like this. Turns out quite a few things from the nice Spyder brand auger bits that we tried and really like now to the obvious need of our favorite stud finder, the Franklin Sensors unit with the line of lights that indicate in a perfectly simple way exactly where the studs are in a wall. I'm not a real fan of outside pockets on a tool bag for much other than some sharpies and things like that because I dont like the way things can get hung up in the work truck or even banging against customers door jambs etc and causing damages we have to fix, so for those I'm just sticking a few things there for now and primarily using the interior of the bag for my needs. #VetoProPac #VetoDRLC #VetoBags
These Links are Affiliate Links and we will earn a small commission by you using them at no additional cost to you! Thank you for supporting our channel!
Amazon Affiliate Links:
Veto ProPac DR LC Bag amzn.to/2ZtfL7U (Amazon Affiliate Link)
Franklin Sensors Stud Finder amzn.to/3axFH8v (Amazon Affiliate Link)
Festool PDC 18/4 Drill Set with TID 18 Impact amzn.to/2Nkysbn (Amazon Affiliate Link)
Fiskars Scissors amzn.to/3pw9TFz (Amazon Affiliate Link)
Wera Ratcheting Screwdriver amzn.to/3pwaaIB (Amazon Affiliate Link)
Wera Joker 6004 Spanner Set amzn.to/3jLhgrt (Amazon Affiliate Link)
America's Number 1 German Tool Distributor! KC Tool
This is where you can get the Zyklop Sets etc, Amazon is iffy on which ones they have and from which sellers unfortunately.
Get your Knipex, Wera, Wiha, Stabila Full Line up etc here:
www.kctoolco.com/?rfsn=513734... (KC Tool Affiliate)
:
Camera Gear Used On My Channel:
Sony ZV-1 Camera: amzn.to/34a4o83 (Amazon Affiliate Link)
Rode Videomic NTG Shotgun Mic Bundle: amzn.to/356ec22 (Amazon Affiliate Link)
MannFrotto Pixie Evo Tripod: amzn.to/31iMjmr (Amazon Affiliate Link)
Rode Wireless Go System for a Lavalier or Boomed Mic
Lighting:
Aputure 120d Mark2 amzn.to/376MX9d (Amazon Affiliate Link)
Aputure Light Dome 2 amzn.to/3jInkAZ (Amazon Affiliate Link)
Aputure MC RGB Light (For Effects) amzn.to/2LM1BeJ (Amazon Affiliate Link)
Music Tracks and Sound Effects are by Epidemic Sound and Licensing Fees are Paid.
Need more Veto Load Outs? Check out our TP-XL video and don’t forget to subscribe!
ua-cam.com/video/U0yynoLRdNg/v-deo.html
Literally never seen a festool drill or impact. Nice video. Love veto bags
I got tired of losing my cat's paw & started painting 'em yellow as well! 😊
I have that same stud finder and YES it’s the best stud-finder I’ve ever used
Absolutely! Y’all thawing out yet down there?
Really enjoyed this review/loadout as I have been considering a new setup for some of my drills. Have my 12V Mikwaukee drills in a packout drawer but it gets full quick. I can only fit the drills and one battery with a charger. Looks like this bag may accept some gear a little better. Thanks and have a great day!
I have the DR-XL, I carry my cordless tools... I love this bag for that!
I can’t keep up bag galore on this channel 😂😂Another great video
Nice bag and tools 👍
From Liverpool UK England.
Thank you sir! Hopefully your weather is better than ours this month. It’s a freezer over here!
@@MillisConstruction yeah . I saw that on our News. Texas looks absolutely freezing . Stay warm & stay safe 💪
Nice bag. Great video.
😂😂 mini blind hardware
Had to. Hate it lol 😂
I’ve got that same three pack of spider bits and they rip through wood like mad. I’ve also got the same stud finder and that video on my channel has just gone berserk. My top two videos are about that stud finder, LOL. My one short video is getting 30,000 views every two days which is crazy cool.
I hate the screws they include with mini blinds and such and usually just toss them and use some of my own, LOL.
Never heard of those bags before you. They look very nicely designed and made.
Have you seen that trim puller I reviewed in one of my videos? It’s like double the width of the one you showed and really good at not damaging drywall when removing trim.
Hey, question for you. Did you comment on the ivytech video earlier and then delete it? Me and Doug over at Fleets wood shop have been trying to figure out why comments show up and then we can’t see them and I always guess the person deleted it.
Anyway, good video and catch you on the next one. Guy
I hope they start sending u free bags, I want to buy some but I keep buying every other tool. Can't stop
That would be amazing, maybe someday! There’s several new ones coming out next month that I’d really like to get my hands on but $$$ ouch 😬. I’ll probably still buy one or two though. My helpers love it when I pass on last years models to them for sure
@@MillisConstruction we feel so bad for your helpers, it must be rough, were did u see the new bags, are they bigger ?
They have a new rolling Tech Bag now almost looks like luggage style, also a new meter bag and a new TP XXL that has removable inserts and meter holders now. Lot of new things to spend money on lol
Nice . STABILA R-Line 24” goes well in this set.
Are you putting it right on top of the bag or how so? I was thinking maybe the one I bought for my tpxl bag a few videos back maybe? Itd fit inside
@@MillisConstruction I don’t have this bag you just showcased but it looks like it may fit inside. However, honestly that STABILA R model is super nice almost too nice to carry but it’s made to be a everyday tool. I also, purchased a Milwaukee Redstick 24” out of Milwaukee fan club😂😂😂 Festool, STABILA, Milwaukee is all I own. Well damn that says a lot.
@@MillisConstruction I wish I could post a pic here I just dinged my 24” r beam hammer fell right on the edge of my level out of all places for $500 Alex😳🤬🤬🤬🤬🤬
Wishing you many more Subs! I really enjoy these videos that ‘showcase’ various products and tools, etc. I like the way you cove4 and illustrate them. Excellent! Stay safe and Healthy! Watch out for all that Global Warming going on! 😳😳😬🙄😃😀😂🤣
👍👍👍👍👍👍👍👍👍😁✌🏻🇺🇸
It’s fantastic isn’t it!! I’m out breaking ice for the critters as we speak 🥶
Have you ever found a wall scanner/ stud finder that reliably detects Pex ?
I’ve not seen one that could with any accuracy. Finding plastic and water is hard 😅
Unless you’re hunting with a Brad nail lol
@@MillisConstruction I guess I could use a 23 ga , that way it would be a while before they saw the puddle . IIRC , Milwaukee had one a few years back , they claimed in could detect Pex , guess it wasn’t too hot at it !
Have you thought of trying the Milwaukee Diamond hole saws?
I’ve been seeing them a lot but there’s only one Milwaukee dealer in my town and they don’t carry those specific ones unfortunately
@@MillisConstruction ah man. Well, that bites.
Great. Another bag I need now that I didn’t need 1 second before watching your video!! Nice.
Hey in my defense I didn’t know I did either 🤣
22AH's not bad Milz
Gets you through a week with drills and impacts pretty well. Thanks for checking it out!
Great video but not the best Veto bag by a long shot.
Very true! It’s worked out really nicely for this setup though. I’m not sure how to pick a favorite Veto, maybe the TP XXL right now but I think I have 9 that I use regularly for different tasks
bell is ON. please do not post daily!!!
Haha Id go crazy doing that! I’m lucky to get one done per week 😅
Good to have you!
I hate to say it but festool is so cheap
What’re you carrying in your bags for drills and impacts?
I would have to totally agree , nothing like just troughing one away n just buying another.
Milwaukee
I carry their 3/8”, 1/2” and the 12v Surge. That’s about all I do with Milwaukee though. Their stubby and surge impacts are very nice. The made in China part is hard for me to get past though even though most everything is made there these days. I try to stick to German, US, Czech made tools primarily
Good gear though!
Some people doesn’t like Criticism they don’t know how to handle it and they reply with Main common you should respect another people points of you or opinions write it downOn your notes snowflakes