I think there's some disconnect here, either on my side or yours. $250-300 is affordable? What economy are you in? I guess it might be affordable for high end, custom knives but $250 isn't exactly what I think most would define as affordable
The designs, fit, and finish of Lionsteel knives are awesome. I paired the M7 with my Benchmade Bushcrafter which I've carried for years. Otherwise I'd go with either the M4 or M5 as a companion to the M7. You really can't go wrong with any of the Lionsteel knives. Thanks for the rundown on the T6.
Many of the Lionsteel knives without the coatings cans still throw sparks even with the crowned spine. Just have to tilt the knife a little and hit it just below the crowning. Give it a go and see if you can do it. If it scrapes decent make a short on it. Cause I don't think many are aware of this, since when people see a crowned spine they are thinking fire steel is out of the picture. But with Lionsteel they usually have a angle below the crowning so Firesteel works. If not you always have that butt end, but I would hold the knife still and move the Ferro rod and not the knife, for more control on where the sparks go. Keep up the great work.
@@stalwart263 because it's so Rambo, I agree, i keep an in one fire steel in a water tight bag inside another water tight bag with some cotton buds and my hand plane shavings for those really wet times where everything is sodden. Makes a big difference and takes up no space. A cheap jack plane (one handed) is small enough too to sit in a pack and is amazing for producing small upto large ribbons for easy ignition, well worth considering 👍
I got the M7, love the finger choil that makes the knife more useable, steel is easier to sharpen, put my own polished edge on it, mounted a tek lok and I've turned it into my EDC! Easy to mount a 'kit' altoids tin to it, small flashlight, extra battery, and ferro rod. In other areas I carry a couple folders and a smaller fixed blade (TRC South Pole) for smaller tasks with premium elmax steel.
I love all three and use them for different tasks. If you only get one (a disturbing thought) and need a chopper/brute, I'd go with the M7. It's the one that fits a wide range for me and handles so well that other large knives just don't even come close in terms of comfort, ease and balance. I have the small camp/bushcraft knife already dialed in. For me, it's a toss-up between the T5 and a Reiff F4. Life is good! But, if you have a chopper, the T5 is amazing and will serve you well. If you need a tactical steak knife, get a White River Jackelope. :)
I absolutely love my T6, although I have the Bohler K490 Superclean version. Super tough knife! I also have the B35 and the M5. I really wish they would make a 9” version. I’d be in heaven then!😊
@@jeremydarkcountrysteckman9496 I would get the M7 too, but I don’t want the finger choil. I would like an extra inch of sharpened edge instead. Lionsteel is my favorite brand for fixed blades, the handles are great.
@@jonathancupp3686 anything over six inches of blade I want a choil so I can choke up on the blade for carving if you want blades without I suggest the offgrid alpha dog and tracker x
@@jeremydarkcountrysteckman9496 I have the Joker Campero and it’s fit and finish is amazing, but I find the handle too round and it tends to turn in my hand.
G'day Aaron, what I especially like is the 3 different designs and steels for each size. Personally I'd go with the 7 for a day hike or overnighter, paired with a 4 incher of some description and leaving a hatchet or machete behind. And the 5 or 6 deeper into the wilderness paired with a said hatchet or machete. In either case a saw will come along too. I reckon the further out you go, the more prepared you need to be with a larger primary and a proportionately competent back up, regardless of weight. These aint particularly inexpensive, but all things considered fair enough I'd say. Thanks for the vid mate, I really enjoyed the look in use and comparison across the range. Cheers Duke.
Great video Aaron. As i mentioned i have the T5 , as a proud owner, and last year i got the M7... Surprisingly the M7 was cheapper than T6 , so i purchased it , for a big hitter n chopper, and it is a monster!!!! Maybe one of my best spend money for years!!!
Good question! The Ursus is awesome and closest to the T5. The T5 is more aggressive a little thinker and $80 cheaper. The Ursus is better for camping and bushcraft the T5 is a better all arounder or battle belt
@@gideonstactical awesome! I believe I bought the Ursus after watching your review and if I remember right you really liked the sheath? Also how do these knives stack against the Joker 5? Apparently I am buying too many knives? 🔪⚔️
KC-01 is a very limited version (only 300 will be made) and won't come out until may. They're somewhat similar but the kc01 has a shorter hedge due to the finger choil and the blade height is slimmer. If you're into these style of blades, Lionsteel is also producing a very similar blade than the kc01 but without the finger choil, it under the brand Saturn knives model is the Titano
@@johnmuthan286 I ordered a black micarta KC-01 from Lionsteel yesterday. For me it's a much better looking knife than the T6, or the M7. I like the finger choil too which the T6 is lacking.
I recently got a T5 after months of research; dude, what an incredible knife. I think I've spent a total of one hour batoning with it, with only about 10 minutes of stropping, and I swear it's better than new. I don't know how Lionsteel flew under my radar for so long, but I will almost certainly get a T6 soon.
Hey Aaron. I have the T-7 and the T-6 in K490. I love the design and feel of it, but to be honest, I've never used it. At the moment, I have 30 fixed blades in which I've downsized from 60. I tend to gravitate to other knives for my backcountry excursions. You're absolutely right when you said it fits somewhere in between. Thanks Brother, GB
I have a Kur and a B35 for EDC, and the T5 (Camp Knife) and M7 (Survival Knife). Thanks very much for this review! The T6 is tempting for the steel, but I agree - the T5 and M7 are always going to be better choices, particularly for the price. BTW, I don't think the T6 is as good-looking; in fact, I kinda assumed it wasn't a Molletta, but it looks like I was wrong on that.
I always Loved the bigger chopper style blades until I bought a Lionsteel T5 and then the M5 and finally the M4 in M390 , LionSteel has some Awesome Blades at Great Prices and now Im kinda getting into the smaller blades , Aron you gotta try the M4 its Awesome and I'd love to hear what you think about it , Great Video , see you on the next one .... 👍🖖
As I've mentioned before, going camping I'm a Nessmuk Trio guy (though now more often with a kukri instead of an axe or tomahawk). But for something unplanned, the T6 would be perfect to put with other gear I keep in my truck or toolbox alongside my backup skinner. Great emergency option and then I can hand down the ESEE to my daughter. The handle is a better fit for her hands than a man's. And I've entirely ditched 1095 anyway.
I’m seeing this vid a little late after you posted, but great review on the knife (Lion Steel has some bangers) and this hydration setup was a nice surprise addition of something I really needed. Thanks Aaron!
Hey Aaron, Superb analysis and review. You broke it down very well, and I appreciate the comparison with the T5 and M7 - especially that you chopped the exact same log with all 3! I also thought it was cool that you gave a shout out to Joe X. I know he is a bit extreme, but it is good to see how far a blade can go and compare it with other blades in a similar manner. I think people don't understand what he's doing and are too harsh in their judgement of him.
Love, love, love my T5...almost enough to sleep with it (of course my wife would get jealous). Of the other 2 knives, since I have the T5, I would go with the M7 or continue carrying my hatchet. Anyway, as usual, an excellent vid...Thank you for all you do.
I got my part on it. Lot's of guys here in It, got part on it. Everything start with the italian knves forum MCKF, owned by Molletta. All started there. 2005.
@@michaelcervantez3570 BK did a good job on their Omni handle but there's always escalation. My hands are double X so my hand gets a bit squished between the protrusions on the top and bottom. It's not terrible, but it's noticeable. I replaced my BK9 with the Condor Moonstalker. Google it, now there's an accommodating handle.
Really appreciate the way yo include "practicality" into your descriptions! I like you may end up with all three! But not comparable to these blades IMHO. Thanx, J
The t6 was more expensive before due to being in k490 when it came out. Those versions sold out and never saw them restocked. The 3V versions seem to replace them.
The T6 is a great knife, everything on this knife is very good, even the kydex sheath. I own the T6 in K490 steel (limited edition) it's simply amazing. In my opinion a worthy big brother for the T5.
This is a new knife maker to me, really love the balance and chunky dimensions. The steel quality seems really decent too, ill be adding them to my collection 😊 youve earned a new sub, have a good one 🙏
Aaron, you obviously like the Lionsteel. You have also previously raved about the Ursus 45. How about a video with a comparison to see which comes out on top.
I had both of them The handle ergonomics on T6 its better then the one on T5…in my opinion After 20 min of working with the T5 my hand was tired and was not fun anymore With the T6 have not such a problem Wayyy more comfortable So i sent the T5 back Thx Aaron for the great review Keep it going 💪😎
What a great knife! I would like to own one, though it is probably overkill for my needs. Still, I would love to have one. Thanks for sharing it with us Aaron!
Aaron, have you ever seen the water filtration system "Guzzle H2O"? It's something you'd keep at your base camp or car, but it's about the size of a small brief case.
I own the T5 and wouldn't trade that knife for any other knife even if it was another Lionsteel model. It is the perfect knife for me and would recommend it to anyone.
I just purchased the Kizer Begleiter (fixed blade) because it was a great knife for the price point at the time, but I'm looking to get something bigger as well, I was leaning towards the ESEE 6, I'd be using it more for being able to chop/split wood, clear a path, but also have other uses than just getting a machete or other 10"+blade, I'd like it to be nice to carry around.
Another thorough review. Interesting that you place this higher than a ZT. Duely noted! I think it's time to ask you for a top choice survival video soon. You're backpacking for one week, one knife! 👊
I love 3V (and glad to see it's not N690 or M390 being from a Euro brand... 🤮) and it's a _beautiful_ knife indeed design and construction wise (Micarta: That is the way) but @ .25" thick and with a not terribly tall blade shape that's a wood prep/heavy use knife in my mind. These days I'm really gravitating to taller, thinner more kitchen knife style blades. Great video as always though man, keep up the great work and best to you and yours.
Different steel and M7 has been a very old product in there lineup, developed in conjunction and initially for a team of European bushcratfer who made a special order for it (limited run, around 10yeas ago). It then became part of their catalogue, so investments have been paid a long time ago for this knife
@@gideonstactical lol I thought it might be a bit of Red coral. Good to have something to remind us of our relationship to Jesus, Amen brother.,❤️ from NZ.
Please review the Fox FX-140XL MB. Has Nilox steel too and is Italian, and has a very similar design to the TRC Apocalypse. Awesome knife, well worth a review to get some love on UA-cam!
Just a thought you have reviwed all types of knives, designs, grinds, why don't you design your own? Im sure some companies would come forward for sure with the expirience you have you can find a connection
Lionsteel is my new favorite fixed blade company. You get TRC quality, fit and finish at an affordable price. I have five of them 😍
Totally they are legit
T6 and M4 are the two I rock for if I go anywhere
I agree...I have the H1, H2, and M2M along with the above T5. Lionsteel is my top company at this point.
@@itywhat6499... I have been looking, but have not seen their 2024 line up yet, have you?
I think there's some disconnect here, either on my side or yours. $250-300 is affordable? What economy are you in? I guess it might be affordable for high end, custom knives but $250 isn't exactly what I think most would define as affordable
The designs, fit, and finish of Lionsteel knives are awesome. I paired the M7 with my Benchmade Bushcrafter which I've carried for years. Otherwise I'd go with either the M4 or M5 as a companion to the M7. You really can't go wrong with any of the Lionsteel knives. Thanks for the rundown on the T6.
Many of the Lionsteel knives without the coatings cans still throw sparks even with the crowned spine. Just have to tilt the knife a little and hit it just below the crowning. Give it a go and see if you can do it. If it scrapes decent make a short on it. Cause I don't think many are aware of this, since when people see a crowned spine they are thinking fire steel is out of the picture. But with Lionsteel they usually have a angle below the crowning so Firesteel works. If not you always have that butt end, but I would hold the knife still and move the Ferro rod and not the knife, for more control on where the sparks go. Keep up the great work.
I just don’t get the obsession with throwing sparks with a knife. Just attach strikers to your ferro rods. Use the right tool for the right job.
@@stalwart263 because it's so Rambo, I agree, i keep an in one fire steel in a water tight bag inside another water tight bag with some cotton buds and my hand plane shavings for those really wet times where everything is sodden. Makes a big difference and takes up no space. A cheap jack plane (one handed) is small enough too to sit in a pack and is amazing for producing small upto large ribbons for easy ignition, well worth considering 👍
I got the M7, love the finger choil that makes the knife more useable, steel is easier to sharpen, put my own polished edge on it, mounted a tek lok and I've turned it into my EDC! Easy to mount a 'kit' altoids tin to it, small flashlight, extra battery, and ferro rod. In other areas I carry a couple folders and a smaller fixed blade (TRC South Pole) for smaller tasks with premium elmax steel.
You're one of the best youtubers in the platform, thank you for the awesome and edifying content, God bless
Wow, thank you
Great video (as always). I own all three knives and can only confirm your statements. The T6 covers almost all work in the wilderness.
I bought one 3 months ago, and very happy with it. It's an awesome knife for sure! Thanks for the review brother 👍🏻
Dobrý deň, ako sa vám s týmto nožom T6 pracujú bežné úlohy? Krájanie potravín, rezanie palíc. Používate o na to či vtedy použite iný? Ďakujem.
Holy cow!! Was just looking at these two (M7 & T6). Stoked for the review!!!!
Awesome! Hope it helps
Yes the joy of living in the Rocky Mountain West. I'm up in Wyoming ;)
Awesome!!
Very interested to see the Architect Knives line. The 4.5, to me, looks like wnat the esee 4 should have been the whole time.
did you see them in this video?
Hello. Would you like to try Saturn Knives? These are other knives I designed for a new company with Lionsteel collaboration.
I love all three and use them for different tasks. If you only get one (a disturbing thought) and need a chopper/brute, I'd go with the M7. It's the one that fits a wide range for me and handles so well that other large knives just don't even come close in terms of comfort, ease and balance. I have the small camp/bushcraft knife already dialed in. For me, it's a toss-up between the T5 and a Reiff F4. Life is good! But, if you have a chopper, the T5 is amazing and will serve you well.
If you need a tactical steak knife, get a White River Jackelope. :)
They look like nice knives.
Ya, these are truly excellent, would love to see some lionsteel on your channel 👍
bought a T5 on your recommendation, really happy with it
I absolutely love my T6, although I have the Bohler K490 Superclean version. Super tough knife! I also have the B35 and the M5. I really wish they would make a 9” version. I’d be in heaven then!😊
I agree I have the m7 and the T6 they're awesome
@@jeremydarkcountrysteckman9496 I would get the M7 too, but I don’t want the finger choil. I would like an extra inch of sharpened edge instead. Lionsteel is my favorite brand for fixed blades, the handles are great.
@@jonathancupp3686 anything over six inches of blade I want a choil so I can choke up on the blade for carving if you want blades without I suggest the offgrid alpha dog and tracker x
Lionsteel knives are great so are joker knives and they're more affordable
@@jeremydarkcountrysteckman9496 I have the Joker Campero and it’s fit and finish is amazing, but I find the handle too round and it tends to turn in my hand.
G'day Aaron, what I especially like is the 3 different designs and steels for each size. Personally I'd go with the 7 for a day hike or overnighter, paired with a 4 incher of some description and leaving a hatchet or machete behind. And the 5 or 6 deeper into the wilderness paired with a said hatchet or machete. In either case a saw will come along too.
I reckon the further out you go, the more prepared you need to be with a larger primary and a proportionately competent back up, regardless of weight.
These aint particularly inexpensive, but all things considered fair enough I'd say.
Thanks for the vid mate, I really enjoyed the look in use and comparison across the range. Cheers Duke.
Great video Aaron. As i mentioned i have the T5 , as a proud owner, and last year i got the M7... Surprisingly the M7 was cheapper than T6 , so i purchased it , for a big hitter n chopper, and it is a monster!!!! Maybe one of my best spend money for years!!!
Precision batoning?
Where did you get the magnetic workbench mat at?
Great review! Love Lionsteel…have 6 in difference versions. How do theses stack up against Ursus 45 in 3V? Thanks!
Good question! The Ursus is awesome and closest to the T5. The T5 is more aggressive a little thinker and $80 cheaper. The Ursus is better for camping and bushcraft the T5 is a better all arounder or battle belt
@@gideonstactical awesome! I believe I bought the Ursus after watching your review and if I remember right you really liked the sheath? Also how do these knives stack against the Joker 5? Apparently I am buying too many knives? 🔪⚔️
Classy callout to JoeX.👏
Hey brother…. Any thoughts on the T6 vs the KC-01 from Lionsteel?
Haven’t used that one yet.
KC-01 is a very limited version (only 300 will be made) and won't come out until may. They're somewhat similar but the kc01 has a shorter hedge due to the finger choil and the blade height is slimmer.
If you're into these style of blades, Lionsteel is also producing a very similar blade than the kc01 but without the finger choil, it under the brand Saturn knives model is the Titano
@@johnmuthan286 I ordered a black micarta KC-01 from Lionsteel yesterday. For me it's a much better looking knife than the T6, or the M7. I like the finger choil too which the T6 is lacking.
I have the T5 and love it. Recently I got the FOX Ryu and I am very impressed.
I recently got a T5 after months of research; dude, what an incredible knife. I think I've spent a total of one hour batoning with it, with only about 10 minutes of stropping, and I swear it's better than new. I don't know how Lionsteel flew under my radar for so long, but I will almost certainly get a T6 soon.
Very cool and glad to hear it!
Hey Aaron. I have the T-7 and the T-6 in K490. I love the design and feel of it, but to be honest, I've never used it. At the moment, I have 30 fixed blades in which I've downsized from 60. I tend to gravitate to other knives for my backcountry excursions. You're absolutely right when you said it fits somewhere in between. Thanks Brother, GB
Nice!!!
I love beefy knives ❤️
They are beautiful blades for sure! Been wanting one for awhile.. I guess it’s that time!
Having a choil is my first requirement when building a knife. Well done.
Awesome video Aaron. And thanks for the shout out to Joe X. Means a lot to see you standing with other knife/ tool content creators.
Totally we are all a community here and have to work together.
I own a lot a very good knives , But if I could only have 2 fixed blades it would be my Lion Steel T6 and M5 in cpm 3v.
Very cool
I’ve been impressed by the the T5...good to know the price has come down on the T6, ya got me looking again...lol
I hate the big finger choil on the M7. I wish they would make a T7.
I have a Kur and a B35 for EDC, and the T5 (Camp Knife) and M7 (Survival Knife). Thanks very much for this review! The T6 is tempting for the steel, but I agree - the T5 and M7 are always going to be better choices, particularly for the price. BTW, I don't think the T6 is as good-looking; in fact, I kinda assumed it wasn't a Molletta, but it looks like I was wrong on that.
I always Loved the bigger chopper style blades until I bought a Lionsteel T5 and then the M5 and finally the M4 in M390 , LionSteel has some Awesome Blades at Great Prices and now Im kinda getting into the smaller blades , Aron you gotta try the M4 its Awesome and I'd love to hear what you think about it , Great Video , see you on the next one .... 👍🖖
T5 in cpm3v and kydex.
I want to see the T5 in 3v as well + convex grind.
Lionsteel forever! ❤
I have a T-6 in K490. Edge retention is amazing. After skinning out, de-boning, chopping up the carcass of a bear, it still shaved hair.
Excellent introduction to these 3 great knives. Thanks.
As I've mentioned before, going camping I'm a Nessmuk Trio guy (though now more often with a kukri instead of an axe or tomahawk). But for something unplanned, the T6 would be perfect to put with other gear I keep in my truck or toolbox alongside my backup skinner. Great emergency option and then I can hand down the ESEE to my daughter. The handle is a better fit for her hands than a man's. And I've entirely ditched 1095 anyway.
Yes, I really use 1095 and when I do it’s on my Junglas. Or if I am testing a knife blade
I’m seeing this vid a little late after you posted, but great review on the knife (Lion Steel has some bangers) and this hydration setup was a nice surprise addition of something I really needed. Thanks Aaron!
Hey Aaron, Superb analysis and review. You broke it down very well, and I appreciate the comparison with the T5 and M7 - especially that you chopped the exact same log with all 3! I also thought it was cool that you gave a shout out to Joe X. I know he is a bit extreme, but it is good to see how far a blade can go and compare it with other blades in a similar manner. I think people don't understand what he's doing and are too harsh in their judgement of him.
Lionsteel products are for me the best choice on the market right now
Sei bravissimo!Un punto di riferimento per i test delle migliori lame sul mercato
Love, love, love my T5...almost enough to sleep with it (of course my wife would get jealous). Of the other 2 knives, since I have the T5, I would go with the M7 or continue carrying my hatchet. Anyway, as usual, an excellent vid...Thank you for all you do.
Right on 👍
Cool knife. Would be a good camp knife I think.
Really good in those situations
You need to get a KC-01 and compare. Seems to me the perfect combination of the T6 and M7. I just got mine today and loving it already.
I saw same knife online but with different steel: LionSteel T6 CVN 5.83" K490 Limited. How does this steel compare to CPM 3V?
Do you ever do tactical fixed blades?
Totally
Havent looked at all your videos, but have you looked into carothers performance knives?
I will check it out
I got my part on it. Lot's of guys here in It, got part on it. Everything start with the italian knves forum MCKF, owned by Molletta. All started there. 2005.
The Becker bk2 ....often replicated never duplicated. Great review if I ever up grade it could be this t-6.
Right on 👍
I love the BK series, but the handles are way more ergonomic on the lionsteels than the beckers.
@@michaelcervantez3570
BK did a good job on their Omni handle but there's always escalation. My hands are double X so my hand gets a bit squished between the protrusions on the top and bottom. It's not terrible, but it's noticeable.
I replaced my BK9 with the Condor Moonstalker. Google it, now there's an accommodating handle.
@@michaelcervantez3570 I have to agree with this, I thought the big BKs were made specifically for my hand, until I held the Lionsteel M7.
I'd love for the T5 to come in 3V with a convex grind and a kydex sheath. That would be perfect.
Preach bro. This would elevate the T5 above anything out there.
Really appreciate the way yo include "practicality" into your descriptions! I like you may end up with all three! But not comparable to these blades IMHO. Thanx, J
What are your thoughts on the raven by toor knives? Or just toor knives as a whole?
I haven’t tried any yet
The t6 was more expensive before due to being in k490 when it came out. Those versions sold out and never saw them restocked. The 3V versions seem to replace them.
the K490 was limited version. 999 pieces were produced
@@renexwing1546 now I double regret not buying it
The T6 is a great knife, everything on this knife is very good, even the kydex sheath. I own the T6 in K490 steel (limited edition) it's simply amazing. In my opinion a worthy big brother for the T5.
At the moment i dont see any better production made knife that is better than t6 in the same price range. Its just done well and and not overpriced.
Every time i have the t6, m2 and m3 in my hand i smile. M4 nice but love the m2 more in that size
This is a new knife maker to me, really love the balance and chunky dimensions. The steel quality seems really decent too, ill be adding them to my collection 😊 youve earned a new sub, have a good one 🙏
Aaron, you obviously like the Lionsteel. You have also previously raved about the Ursus 45. How about a video with a comparison to see which comes out on top.
Coming soon!
How does it stand with the odinwolf?
Not the same class of Knife at all.
I had both of them
The handle ergonomics on T6 its better then the one on T5…in my opinion
After 20 min of working with the T5 my hand was tired and was not fun anymore
With the T6 have not such a problem
Wayyy more comfortable
So i sent the T5 back
Thx Aaron for the great review
Keep it going 💪😎
Hi Arron what gloves are you wearing in the video?
Can anyone tell me about the coating on Lion Steel
I’ve got that exact knife…love it…
How is It if you compare it with tops silent hero?
The SH is a great blade and lighter and faster for stabbing, but the steel, and ergos of the lionsteel are better for camping and survival.
Thanks 👍
Fantastic knife!!! Great review!!
Thanks for watching!
Dang! How wide is that thing?
Very
Solid knife .
What kind of carabineer is that on your mat ?
What a great knife! I would like to own one, though it is probably overkill for my needs. Still, I would love to have one. Thanks for sharing it with us Aaron!
Aaron, have you ever seen the water filtration system "Guzzle H2O"? It's something you'd keep at your base camp or car, but it's about the size of a small brief case.
I checked it out crazy!
I never pulled the trigger on the T6 having the bigger brother already. Where I live price was 320 euro.
For a hard use edc/ do-everything-camp knife, which steel S35VN or 80CRV2?
I would pick s35vn
how does it compare to GSO????
Really goodd
@@gideonstactical th GSO or the lion? thx for answering btw.
Whire river ursus 45 vs this one ? Looks like a very good head to head video
I believe this will be the next lionsteel I get. Love ❤ the review brother
I own the T5 and wouldn't trade that knife for any other knife even if it was another Lionsteel model. It is the perfect knife for me and would recommend it to anyone.
How does this stack up to the Benchmade Bushcrafter 162 ?
Any chance of a comparison between this and the Reiff F6?
I would take this knife instead mainly because of the handle ergonomics and weight are better for chopping
The Lionsteel T6 in CPM 3V is The Best!!!
Nice blades !
I just purchased the Kizer Begleiter (fixed blade) because it was a great knife for the price point at the time, but I'm looking to get something bigger as well, I was leaning towards the ESEE 6, I'd be using it more for being able to chop/split wood, clear a path, but also have other uses than just getting a machete or other 10"+blade, I'd like it to be nice to carry around.
Hey G. You should get your hands on the WTG Wolverine or Mt Lion.
Good review Aaron
Love mine. The T5 &6. Have you seen the new kc-01 ??
Awesome video and blade. Deep voice was funny 😂😂😂
As a knive enthusiast, i was surprised by the quality of Nomad, for the price excellent.
You and me both!
Could you imagine if your country made you delete all your videos? Your whole life’s work? Wild what happened to Joe X.
Yes very crazy
Great video buddy
I just came back from 2 months backpacking the rural areas of Thailand and I only had a Mora 546. So what is a 'survival' knife.
the one you always have on you which will probably be something small and easy to carry.
@@LXT43 I fully agree.
I do not see it worth 3x over in cost vs a Joker 6.5 Nomad or Cudeman 299B both in Böhler N695. What am I missing?
N695 is a cheaper and less tough steel .
@@johnmuthan286 I will take three vs the marginal one
Lionsteel are great
Another thorough review. Interesting that you place this higher than a ZT. Duely noted! I think it's time to ask you for a top choice survival video soon. You're backpacking for one week, one knife! 👊
The ZT is a combat knife first, but excellent in the outdoors too. This knife will easily outclass it in chopping as well as in overall ergonomics.
Another great insightful review
I love 3V (and glad to see it's not N690 or M390 being from a Euro brand... 🤮) and it's a _beautiful_ knife indeed design and construction wise (Micarta: That is the way) but @ .25" thick and with a not terribly tall blade shape that's a wood prep/heavy use knife in my mind. These days I'm really gravitating to taller, thinner more kitchen knife style blades.
Great video as always though man, keep up the great work and best to you and yours.
Why is the T7 so much cheaper than the T6? Is it a differebt steel?
Yes it’s the steel
@@gideonstactical thank you
@josephg.3370 it's still a very good no awesome knife the m7 . It is my GOTO hard work knife. I own 5 big blades and it is my favourite large blade .
Different steel and M7 has been a very old product in there lineup, developed in conjunction and initially for a team of European bushcratfer who made a special order for it (limited run, around 10yeas ago). It then became part of their catalogue, so investments have been paid a long time ago for this knife
I’d like a t-5
Hi Arron, just curious about the Red ring you have on your finger, what is it made from?
Awesome knives by the way😊
It’s just simple silicon ring. Reminds me of my first love Christ 👍
@@gideonstactical lol I thought it might be a bit of Red coral.
Good to have something to remind us of our relationship to Jesus,
Amen brother.,❤️ from NZ.
If you can find one!
Please review the Fox FX-140XL MB. Has Nilox steel too and is Italian, and has a very similar design to the TRC Apocalypse.
Awesome knife, well worth a review to get some love on UA-cam!
Just a thought you have reviwed all types of knives, designs, grinds, why don't you design your own? Im sure some companies would come forward for sure with the expirience you have you can find a connection
Thanks so much, working on some designs 👍
@@gideonstactical ok ok great to hear
Order my T6 yesterday. Can't wait