Sooo happy to hear about the new routers with Ampere, I've been hoping for a more powerful router! Can we get any rough timeline, like first half of 2025 for instance? Also I would love a USA MUM soon!
The head of Mikrotik's wife passed away and as a result he found that these videos are much cheaper and just as effective so there will NEVER be another MUM
Speaking of Redundancy: It would be absolutely great if you'd support MLAG. Not this nonworking try even in the latest beta, it simply doesn't work as expected. Could be done by virtual stacking, at least in the CRS5xx series. ALL new Mikrotik devices with POE-Out Port should support 57V, so you can Power any POE-Device (DECT-Base, IP-Phone and so on) with them. Support only with 30V ruins the whole product, especially if you are powering these devices with an 5009, supplied by 48V for POE.
HEX Refresh: "we’ve increased the RAM from 256 MB to 512 MB, and replaced the CPU with a modern ARM64-bit dual-core workhorse!". Can you clarify why the product specification says ARM architecture and not ARMx64? Thanks.
Is it possible to implement more powerful switch chips at least in the CRS product line, along with installing a powerful central processor? I think this is a more important decision than simply installing more powerful processors.
HI! I've already asked support but haven't received an answer yet (it's fine, I asked a few hours) but perhaps you have more in-depth answers. Will the new PPSK feature eventually support using VLAN-ID for wifi-qcom-ac devices? It is a pretty big limitation not have it, it's what I was looking for and I'm kinda disappointed 😅
I hate how instead of old hEX getting cheaper and the new hEX taking it's place, the old hEX will remain having the same price while the new hEX will be 20-30€ more expensive. At the very least that's my prognosis for Croatia
Getic, where I usually bui my tiks, sells hex at 55,8€ and refresh at 61,23€ so there is 5,4€ difference. In Finland sellers old HEX is 73,99€... Refresh is definetly something I would have upgraded instantly if it still have been my main router. My biggest issue with original HEX was the performance. Currently have RB5009, so no need to upgrade.
I am waiting for Wi-Fi 7 in Haps.
With 10g SPF+ uplinks
@@jasonhart679 I would be in heaven if I would see 2,5 Gb ports.
Some good new products, and the Ampere news is super exciting.
However, none of the new/refreshed products contain a beeper which is disappointing 😕
I recently bought the older version of that and was pleasantly surprised that it had a beeper. I agree, not having one is now a disappointment
Especially when they brought it back in some products and made a big deal out of it. 🤦♂️
Sooo happy to hear about the new routers with Ampere, I've been hoping for a more powerful router! Can we get any rough timeline, like first half of 2025 for instance?
Also I would love a USA MUM soon!
Why chatteu ax pro has no 2.5gb port, when even hap ax3 has one? Fast wireless but slower uplink than ax3 etc.
I've got the same question: I'd like to buy a new Chatteu AX PRO, but 1Gb port for uplink is disappointing me.
@@Dimensvlzat least 2.5 prefer a 10gb SFP+
Hi Folks!
When the MUM events come back?
The head of Mikrotik's wife passed away and as a result he found that these videos are much cheaper and just as effective so there will NEVER be another MUM
Good morning everyone, are you going to launch a new line for multipoint?
LHG equipment has been discontinued
Ampere looks interesting. I finally have the wAP AX installed on my garage wall and it has been working great.
Speaking of Redundancy:
It would be absolutely great if you'd support MLAG. Not this nonworking try even in the latest beta, it simply doesn't work as expected. Could be done by virtual stacking, at least in the CRS5xx series.
ALL new Mikrotik devices with POE-Out Port should support 57V, so you can Power any POE-Device (DECT-Base, IP-Phone and so on) with them. Support only with 30V ruins the whole product, especially if you are powering these devices with an 5009, supplied by 48V for POE.
Excelente. Ojalá pueda meterle mano de nuevo a alguna MK.
HEX Refresh: "we’ve increased the RAM from 256 MB to 512 MB, and replaced the CPU with a modern ARM64-bit dual-core workhorse!". Can you clarify why the product specification says ARM architecture and not ARMx64? Thanks.
When there will be outdoor 5G antenna?
Love the shirt!
Porque descontinuaron la disc5ac
Is it possible to implement more powerful switch chips at least in the CRS product line, along with installing a powerful central processor? I think this is a more important decision than simply installing more powerful processors.
A question not related to Mikrotik products -- where you put your laptop on ? Is it a laptop stand ? Looks cool !
New RB5009 poe please, please add another sfp port
Hi, can you guys consider introducing Mac Trace? i mean we have Mac Ping, Mac telnet, i believe it's possible to build on that and introduce Mac Trace
Why would you need a mac trace ?
Looks great. But there is one question. Is it just me or did they really cut out the MicroSD slot from the new Hex?
Yeah it looks like they did, I don't mind too much per say, I only really used the microsd for daily backups anyways.
What did you use yours for?
HI! I've already asked support but haven't received an answer yet (it's fine, I asked a few hours) but perhaps you have more in-depth answers. Will the new PPSK feature eventually support using VLAN-ID for wifi-qcom-ac devices? It is a pretty big limitation not have it, it's what I was looking for and I'm kinda disappointed 😅
Nice! Ampere :)
Does the refreshed hex support zerotier package?
It Should, bc the ZeroTier MikroTik package need ARM architecture which Hex refresh has
Waiting for lhg and Sxt AX
new product line:) sounds great!!!! btw: awsome shirt:) as always:]
Wifi 6e or 7??????
we need a dashboard to monitor and config products. Like Meraki but better
I hate how instead of old hEX getting cheaper and the new hEX taking it's place, the old hEX will remain having the same price while the new hEX will be 20-30€ more expensive.
At the very least that's my prognosis for Croatia
Aren't you getting double performance? 😂
Price is The same
Getic, where I usually bui my tiks, sells hex at 55,8€ and refresh at 61,23€ so there is 5,4€ difference. In Finland sellers old HEX is 73,99€... Refresh is definetly something I would have upgraded instantly if it still have been my main router. My biggest issue with original HEX was the performance. Currently have RB5009, so no need to upgrade.
;)
Летми спик фром май Харт 😂