Mercedes Benz VALVE COVER GASKET Replacement MADE EASY | Mercedes Benz S Class S500 W220 M113 Engine
Вставка
- Опубліковано 2 лис 2019
- #Mercedesbenz #Mercedesbenzengine #Valvecovergasket
Hey everyone! Have you ever had that burning motor oil smell in your car while you were driving on long trips? If so, then it’s probably because your Mercedes-benz has an old valve cover gasket that needs to be replaced. That’s not a problem because changing the valve cover gasket on the Mercedes-benz s500 M113 engine is super easy. After changing the valve cover gasket and valve vent hoses on your Mercedes-benz valve cover. I would recommend changing your Mercedes-benz valve cover gasket and hoses every 50,000 to 100,000 miles because the rubber can get hard and it makes the job easier if you change your valve cover gasket before the rubber gets hard. Alright, let’s roll up our sleeves and go to work!
__________________________________________________________________________________________________
▶🔔Please like and SUBSCRIBE + Turn on Bell Notifications🔔 Thanks!
▶💲 Show Your Support By Clicking On The "Thanks" Button Below This Video
▶💲VENMO: account.venmo.com/u/GarageDyn...
▶💲 PAYPAL: www.paypal.com/donate/?cmd=_s...
▶TWITTER 🐤: / garage_dynamics
▶FACEBOOK: profile.php?...
__________________________________________________________________________________________________
🛒 Amazon
▶Valve Cover bolts for breather cover (You will need 5 bolts): M5-0.8 x 16mm: amzn.to/3PzfsS5
▶VictorReinz Sealant: amzn.to/3Pz0ji1
▶Crankcase Breather Hose kit for Mercedes-Benz: amzn.to/3rMylFx
▶3/8-Inch Drive Metric Crowfoot Flare Nut Wrench Set: amzn.to/3YrC7nt
▶Car Door Clip Panel Trim Install Removal Tool Kit: amzn.to/32d6m3l
▶MAXPOWER 9-Piece 3/8-inch E-Torx Star Socket Set: amzn.to/2C9NW96
▶Ultrasonic Cleaner Stainless Steel 10 L: amzn.to/3FTIRTP
▶3-Piece 72-Tooth Flex Head Ratchet Set: amzn.to/3V16qOT
▶3/8-Inch Drive Quick-Release 72-Tooth Ratchet: amzn.to/3BFuTCy
▶Click Torque Wrench: amzn.to/3W8C6TR
▶1/2 Inch Drive Click Torque Wrench: amzn.to/3FWlOrn
▶3/8" Extension Set, 4-Piece: amzn.to/3uWQeDE
▶Clear Plastic Storage Bins: amzn.to/3BGlDOr
▶Concentrated Cleaner & Degreaser: amzn.to/3HGL6vd
▶Dishwashing Liquid For Sonic Cleaner: amzn.to/3YqjErt
▶Nitrile Exam Gloves: amzn.to/3FzbRil
▶Nylon Industrial Gloves: amzn.to/3FwQfDq
▶Microfiber Cleaning Cloths: amzn.to/3hs7Owr
▶Paint Brush Set: amzn.to/3W4aVJW
▶Scotch-Brite Heavy Duty Scour Pads: amzn.to/3XCEMKp
▶Cleaner & Degreaser - Heavy Duty, Professional: amzn.to/3kvQKXy
▶PURPLE POWER Degreaser: amzn.to/3D1pYwy
🎦Video Equipment Used For Videos
▶Main Camera: amzn.to/3XPXiz6
▶GoPro: amzn.to/3XJXgsG
▶Wireless Microphone: amzn.to/3H1bBLu
▶Microphone (Voice Over): amzn.to/3UgMdnS
▶Camera Microphone: amzn.to/3irXaG2
▶Dead Cat: amzn.to/3OSfLXJ
▶Tripod: amzn.to/3AZlqWn
▶C Stand: amzn.to/3GYgcOv
▶Lights: amzn.to/3UrPalA
▶Light Stand: amzn.to/3in5c2R
▶12-60MM Lens: amzn.to/3VLjSHo
▶Macro Lens: amzn.to/3vbZxOn
Proceeds help support this channel. Thanks! - Авто та транспорт
I have a 99 SL500 m113 one of the first things I did was removed the crankcase breather cover from valve cover cleaned out sludge and drilled out that hole you referenced with no negative consequences as far as I can tell. It’s a known mod in the M113 community. 50% recommend with logical mindset why you’d want to. 50% are old guys who say “MERCEDES DESIGNED IT WITH THAT SIZE HOLE FOR A REASON, ALTER IT AND YOUR CAR WILL IMPLODE KILLING YOU AND ANYONE WITHIN A 5 MILE RADIUS” so yeah. lol
That's a mod I did on a GM3.6,I have a ML430 would that be a good idea,I knew to Benz,in NZL also?!
This is like attending a Master Class. You sir are very thorough and concise with your work. Kudos to you. I am planning to do this to my W203 M112 722.6 C 240. Thank you!!!
Yeah, no kidding. Calming voice, too. Makes everything less scary, like handing ya a lightbulb and a map while thinking about venturing' thru the dark on a M113! Lol.
Mine needs to be replace on my w220 s500 is it something I can do at my house or a shop
Mine needs to be replace on my w220 s500 is it something I can do at my house or a shop
1- That attachment is called breather cover (it's the same thing as PCV valve in other cars, separates oil from the air)
2- If that small hole gets blocked it causes multiple issues :
a- P0047, P0104
b- Once in a while the blockage would open on its own and it would suck in a bunch of oil which ends up straight in the intake
3- Degreaser followed by tyre foam cleans these oil deposits really well
Thank you for the helpful information Ahmed Saleh!
Well I did the job, took two days for me. Cleaning parts was the longest part of the project. Changed oil as well and wiped up the oil on my undercarriage. This video was perfect, I had challenges with the hoses and watch more of the video and worked through it. Thank You a Bunch for posting this, PERFECTION.
Congratulations Eric Thornton! Two days is normal. Usually you do one side and then finish the other side the next day. And yeah, those hoses can be a pain to remove haha. Thank you for the kind words. I'm glad this video could help.
When removing the upper breather cover I found it best to use a heat gun makes it a lot easier. Great video production was excellent ... Very informative
'Heat gun ' great tip thanks
what type of gasket maker did you use? what type do you recommend ?
@@Menga213 I used the Mercedes approved gasket material. it's expensive, somewhat hard to get out of the tube and has a short working time but 4 months later no leaks. The most important thing to bear in mind is the cleaning of the gasket surfaces. Make sure they are totally clean no grease or old gasket material. It sounds easy but I spent about an hour on each valve cover. Make sure you follow the torque specs. Good luck with your project, and take your time,
@@outofthinair1 When I took my valve cover bolts off they were barely tight-is this normal?
@@sl5311 Totally normal, mine were loose as well. The engine heat, cool, cycles shrink and hardens the gaskets. It's not a horrible job , it's just time consuming. Make sure to replace the aluminum breather cover bolts. Good luck on your project.
SUBSCRIBED .
Excellent Angles / view from above with no movement.
Excellent camera placement.
Step by step DIY .
Best video yet .
This will Help ALOT
MB S500 2005 4matic .
Excellent at thoroughly explaining and videoing the process.
This is exactly how I would do this job at home. This sir, this is surgical cleanliness and precision. And I’m subscribing as well. Keep up the great work please.
Hello commodoreras! Thank you for the appreciation and subscribing! I am very grateful for your support. It's always nice to meet another like minded individual. :)
this is an outstanding tutorial. i’ve been chasing vacuum and misfire codes for a couple of months, and by process of elimination have recognized that the oil residue in cylinders one and two are a result of a gasket in need of replacement. i’ll be tackling this project in the coming weeks with all the confidence in the world thanks to your video and the associated links for the necessary products. ’preciate you, man.
Hello idc studio!! Thank you for the kind words! I'm glad this video could help!! Happy wrenching!
Your videos are very helpful. I have a 2005 S430. I keep it running like showroom. I followed your maf video and the video above. Thanks so much for your work. Tick noise at idle from cyl 3, but only at idle. keeps going as the m113 motors were great motors....
Awesome detailed videos a piece of advice power wash the valve covers with hot water will clean them spotless save a lot of time then the Small Things hand clean them with hot soap water
Great job on the video and work, Getting ready to do the same exact job on my 2004 CL 500. Thanks
Another excellent video. I just did my valve cover gaskets and this video plus the MAF video were a great help.
Best, most informative video on this subject...Thankyou, very helpful
Torching the old mercedes-benz silicon (aka adhesive), really helps to relax it and make it pliable and easier to remove. Great video, thanks for making it!
You are great teacher.
Thanks for your videos
Thank you from England. Really good video of just what I am looking to do shortly. And also the parts links too 'brilliant.
Thanks, very helpful!
Superb tutorial and technique...like listening to Bob Ross paint. Thank you for being so detail oriented and providing great play by play instructions. Plan to try it out on my '02 CLK 430.
Thank you for the kind words Mark Adams! I'm glad this video has helped you and I wish you a happy experience on your CLK 430! :)
My favorite mechanic for learning how to properly work on Mercedes-Benz. Subbed and a big thumbs up. I'll be watching your other videos carefully. Keep up the good work!
Thank you very much for the kind words Justin Sgalio! Thank you for subscribing too! I really appreciate your support. I'm glad I could do something to make your life a little bit more enjoyable. I'll definitely keep up the good work! Cheers brother!
Like your speech, it is calming,very well done, detailed
Wow! what a great video!!!
Very detailed and easy to follow. Thanks so much!!!
Hi Cesar Burbano! You're welcome! Thank you for the kind words! I'm glad it could help. Cheers! :)
I'm doing the same job on my 99 SL500 based on your video. I going to suggest you put a rag or old shirt on top of the exhaust to avoid oil falling on it. And if it does, well, you're covered. No need to clean afterwards. Another thing I did when taking the fuel hose off. I cut a small piece of a plastic water bottle about 2" from the bottom and place it under neath the hose intake to collect the gas that will drain. As it gets full, plug the hose back up and drain the gas on the other half of the bottle. Of course, it will be up-side down, but it works. You will have a bit of spillage but you use the gas to clean the covers, specially where it's full of thick grease. I also cleaned the cover (s) with awesome cleaner which you can get at the 99 cent store. Thank you for posting your video and hope this will also ease a bit of the work and mess.
Nice videos! I am currently restoring my W123
Hi Vito's Garage! That's awesome! Come back and share some pictures or videos when you're finished :)
You're very meticulous. Excellent video. Thanks for making it.
I just did the same job yesterday on a 211 E320
Thanks for the great video. You've probably saved people thousands of dollars with this video. Mercedes are so much easier to work on then BMW.
Thank you for the kind words rparadis24! I'm sure I have. I wish they would donate to the channel more haha! 😂 I hear that a lot that Benz is easier to work on than BMW. I think Lexus is pretty difficult to work on as well
I just purchased a s500 and I haven't even registered it and this is gonna be one of the first things I'm doing . Saving the video !
Congratulations on your new S500 Jeff Supplee!! It's an amazing car and the valve cover gasket change is definitely a good improvement to the car!
Very good content gives me more hope in my w220 purchase but I’m also Pretty convinced he’s worked at a MB dealer Before can’t get this much detail from a repair manual
Beautiful I love this engine especially the one in my car of course , ty for your video.
Thank you, I will be starting the project in an hour and I feel good with your video. 2006 SL500
You're welcome Eric Thornton. I'm glad this video has given you confidence to start your project. Enjoy the process!
Thank you SO much for this amazingly informative video! Sure helps us hobbyists do our own repairs and save some 💵💵💵!
Very nice work. Do you think I can just use brake cleaner to clean the gasket channels?
reflect on this comment in 2 years time from today. YOU WILL BE THE NEXT BIG AUTO UA-cam CHANNEL! You made an educational and asmr video at the same time. keep it up!
Thank you very much for your kind blessing Omar Ayub!!! I receive it!!! God bless you brother!!!
i spent two days trying to find out the gasket for the valve cover cover , looking in mbz official websites for parts and diagrams and that small cover it just doesn't show anywhere , maybe in the haynes repair book that i dont have yet. hesitated to bring it to repair center , though about it twice but watching this video finally showed me theres no GASKET for that cover cover... its a silicone glue!!! you just saved me 1,2000!!!! thank you
Hi aLLDaYeVerydAyAPple! I love your story! That's so amazing!! Thanks for sharing this with me. I'm glad this video could help you and save you 1,200!!!
Your videos are a gem
Great video, as always. Are you ever going to do a video changing the rear main seal? That's a serious repair and there are no current videos showing how to do it.
Great video!!
So... the couple dozen nuts from the valve cover do not need to be replaced but the couple aluminum ones on the breather do have to be replaced!
Thanks!
Nice job ,, one tip ,,place a rag over the exhaust manifold before you remove the cover so it doesn't get covered in oil and smoke when you start the engine.
22:15
@@crash4dafun Thanks , I missed his commentary there..
Great video! Well done!
very educative . Thank you regards
Best tutorial I've ever seen in my life
Thank you for the kind words llNawarll :)
Awesome video, the chambers you are referring to are the 'Breather covers'.. also, there is no issue with drilling out the orifice by a small bit, won't change much but can help alleviate it clogging again. Great video!
Hello ANDERZÉN, Thank you for the information. That's good to know that I can drill out the hole 😅
Well explained and filmed. So everyone should be able to do it themselves.
Best regards from Germany
Thank you very much Helge Ullmann. Haha, in theory everyone should be able to, but it also depends on the person. Kind regards from America :)
Marvelous tutorial.
Thank you Reggaeriderr! :)
How's everybody's engine's out there? Have you ever had to take apart something on your Mercedes-Benz engine before? I'd love to hear some of your epic engine stories in the comments below. Cheers!
I removed and rebuilt a Smart Fortwo 450 diesel and a ML with a 272 engine. The 272 in my home garage was a bit tricky getting a decent finish on the Aluminum cylinder bores.... got about 5k on it and no oil burning... must be ok :)
I have an 01 E55 now and had an 01 S55 that went through a flood and started ticking and finally almost 3 months later blew up lol
Great video. You don’t need to add any type of heat resistant silicone to the gasket?
Hello there. Great video, informative and well made. Could you advise? 1) Do you have to drain the oil before this job, or does it all drip down into the pan and the cover is empty ? 2) And can you re-use the bolts for the main cover or did you use new ones? Thank you, take care.
1.) i haven’t done the process yet but i was told by a mechanic to just wait until your engine cools down and you don’t need to drain oil. 2.)For the main cover he re-used then as seen in the video he just cleaned them, but the 2 bolts for the secondary piece he said are one time use and have to be replaced otherwise will strip.
Excellent VIDEO
you explained the process in detail. I have a c320 and i realized that those two hose you replace on the driver side need to be replace. any advice i never work on a car like this before. i don't have to remove the valve cover, i only want to replace those two hose. do i have to depressurize the fuel before I replace the hoses? what is the easiest way to disconnect the hose especially on the two way valve.
thanks for help.
do you have a video how to replace spark plugs? what is your advice, do i have to change wires when i replace the spark plugs?
PLEASE HELP ME
Nah dawg unscrew that silver braided fuel line and have a rag ready there will be fuel but it will go right back on
Great video, cool calming voice.
I will be working on my Japanese spec 2004 C55 AMG.
Liked and subscribed!
Thanks for a great video.. God sent awesome..
Thank you for the kind words Henry Lee!!! :)
Your instructions are excellent I need you to repeat the tool spec when your using it!!!! Lol its hella helpful to hear , I knw this vid is older but still very important
Hello Jason Brown! Thank you for the kind words! Ok, I'll be sure to do that for future videos :)
What size are steel hex bolts you used when you replaced the upper gasket? Where can I get them? Thanks! Great video.
Hello Mike Lin, You can find the bolts here: M5-0.8 x 16mm: amzn.to/2wAeHEh
Can’t wait to do this to my 99 SL 500
Excellent video
Thank you Jason! :)
So clear...technically perfect especially for amateurs like me. PEACE.
Wow thank you for video you so good mechanic to fixing the car I want to close with you to fixing my Mercedes 2014 thank again
Thanks again PhatSphouthalansy! I will let you know when I get a shop 😊
I love this tutorial! Only thing is I know I would have got stuck on this because you didn’t show how to remove the coil packs lol. I haven’t built up the courage to do this even though my cl55 needs it. By the way…. Have you ever made a video on how to change that black plastic 3 way heater hose connector on the firewall?
Thank you for the kind words Fairgame70! Ahh yes, I link removal of the coil packs in my spark plug replacement video. Please take a look at that video to see how to remove the coil packs. They are only held on by one screw. I hope this helps. Cheers!
Thank you for this helpful video i successfully replaced the valve cover gasket on my slk 55 that has been leaking for awhile. Unfortunately it does not fix my main issue of misfire on cylinder 7. Engine light came on and code says a misfire on cylinder 7 then I already did change the spark plug, fuel injector and ignition coil and the misfire and check engine light was fix but after a few days the engine misfires on cylinder 7 and the check engine light keeps coming back so i replaced the valve cover gasket with this helpful video and the check engine light and misfire on cyl 7 was fixed but after a few days the check engine light came back and misfire on cyl 7. I don't know what to check besides a compression test but i am not sure that will solve this. Your thoughts about this? Thank you very much.
Great vid bro !, I have to do this job on my 02 E430 sport , how long would you say it takes , about ? You said a 1 hr job , but looks more like two ...Thanks !
Thank you Michael Martin! Nice! If you work fast I'd say it could be completed in 1hr, but please take your time. So, I would recommend 2, or even 3 hours. Happy wrenching!
This was a good video but why didnt you specify what size torx bits you used
Excellent video I have a 2004 MB SLK 32 AMG I think I have a small valve cover leak, There is a bit of oily smoke after it gets heated up rising from under the hood. a little bit of weeping oil only from the bottom edge of the smaller valve cover that sits on top of the main valve cover on the drivers side. I removed all the top air intakes and the coil packs and confirmed that this seems to be the only leak. I thought of just tightening the small valve cover a bit more but didn't as it might just make the leak worse. Is it possible to only remove this smaller cover, clean up everything and reseal it without disturbing the main valve cover. Would you you do in this case is is it just better to remove all of it. The Right side valve cover seems to be fine. Since there is no factory gasket for this smaller valve cover piece on the left drivers side what is the best sealer to use for this ? Would you also still replace the two long top bolts that hold this piece with stainless. Thanks for the excellent video. SK Ohio
Hello Steve K, Thank you for the kind words :) It's possible to remove only the small top cover but it's possible that some of the silicone will fall into the main valve cover area while cleaning. If you are sure you can clean and replace the cover and not let debris fall into the valve cover then I say to make your decision on how confident you feel. Personally I would remove the whole valve cover and then clean the small cover very well, which is necessary for a proper seal when applying new sealant. Also, please do not tighten the valve cover bolts as this could possibly damage the threads. the main valve cover bolts have a torque rating of 9Nm and the small cover has a rating of 4Nm I believe. This is a very small amount of pressure. The small cover bolts are one time use bolts and over tightening them could damage the threads. The silicone that I use for the valve cover is VictorReinz Sealant: amzn.to/3Pz0ji1
I hope this helps. Cheers!
How long you need to wait for that sealant to cure before you drive? Btw, you're very detailed person.
Where do you dispose of the fluid that you used to clean all the parts? Always a conundrum when considering doing this sort of work at home?
Great video. Thanks. I have to do this job on my E430 which has this M113 engine. One comment. I would not recommend anyone to enlarge the hole in the breather cover. I'm sure the size of the hole is calibrated to allow a certain amount of air to flow through and no more.
Thanks for your input Fred Smith. I know the community appreciates your knowledge and advice on the subject :)
Do you a tutorial about how to change the spark plugs on a 1998 E320?
Hi, what tools (size) are necessary to remove the valve cover?
What screws and hoses should I purchase for this job? Thanks
Hello James Donaldson, Here is a link to the screws for the breather cover: M5-0.8 x 16mm: amzn.to/2wAeHEh The hoses can be found at www.autohausaz.com
Good idea to change plugs while you’re at it too
Where did you buy the valve cover bolts from?
I did make that hole bigger and so far no problems 6K driven , my car is 2005 E320 4matic
Hello Greg Porsche! Nice! How large did you make the opening?
SkipArtPictures not much , when I was cleaning I use small screwdriver was almost going true that hole so I push harder and open that , maybe two millimeters in diameter no more
what is the oemnumber of the first hose you take of (at the passenger site)? it maybe crack also
Hello Frans Barmentloo, I have a link for a complete breather hose kit that has all the hoses for the engine covers.
Crankcase Breather Hose kit for Mercedes-Benz: amzn.to/3rMylFx
This link can also be found in the description.
I hope this helps. Cheers!
Is there a proper way to dispose the used cleaning solution?
how bad is it if i forgot to cover the bolt holes on one of the covers?
Do you have a link for the stainless replacement bolts you used? Thanks so much for the video!
Hello David Perrera, Yes, you can find the bolts here: M5-0.8 x 16mm: amzn.to/2wAeHEh
@@GarageDynamics can you find these bolts cheaper? Can i just use homedepot bolts?
@@Menga213 Yes, you can buy these bolts at homedepot or lowes. Make sure to purchase stainless steel bolts. Hope this helps. Cheers!
@@GarageDynamics I'm doing this same job I'm just looking for those 2 hoses that u broke do u have a link
@@car-toonnetwork7723 Yes, I do. All the parts links can be found in the description of the video. Here is the link for the hoses.
Crankcase Breather Hose kit for Mercedes-Benz: amzn.to/3rMylFx
Happy wrenching!!
Did you take the oil out of the motor I’m going to do this pretty soon and I don’t know leave the oil in or take it out
Hello Sophia Lee, I left the oil in the engine. For valve cover gasket replacement, it is not required to drain the oil. I hope this helps. Cheers!
This is the best video on an M113 valve cover gasket video! Very calming and informative. I do have one question. I have a leak from the valve cover gasket on my R129 1999 SL500. So the area around the leak have oil drippings around the coils and spark plug wires. How would you go about cleaning the engine? What can I use to clean the coils and any electrical components? Thank in advance!!
Thank you for the kind words Dustin 🙏 I would recommend cleaning the engine with Purple Power or Simple Green Professional engine de-greaser. I recommend using denatured alcohol and scotch brite pads to clean the metal contacts on the ignition coils. Then do a final cleaning by spraying the coils with electrical parts cleaner. I hope this helps. Cheers!
Thanks! After taking off the engine cover and cover up the air intake, the engine is pretty much water resistant right? I can also just use a steamer to clean around the valve cover.
Does this apply for a 2005 Slk350
Yes I did drill the breeder little hole I didn't see no different in performance but I just did it so it's more difficult to get blocked
Why does Mercedes use permatex instead of using an actual silicone gasket?
Do those coils fire at different timing or do they fire at the same time
Hello tinoracing7 Yes, I believe so. Because there are two plugs per cylinder they will both fire at the same time.
Did you ever find out whether those breather cap holes could be drilled?
Hello Sakeenah Auto Solutions! Not yet. I think I saw someone mention in the comments that they drilled out their breather cap hole and had no issues. I will perform this procedure later on with a separate breather cap. Then I will keep enlarging the whole little by little until i run into a problem. Once I know the optimal size I'll let you know. :)
@@GarageDynamics lol I'm doing this job in a few days but thank you though
@@GarageDynamics if the holes are enlarged too much the additional unmetered air will cause a lean condition and possibly introduce engine oil into the throttle body and intake with the increased suction ... Tread carefully when doing this ....
@@outofthinair1 Absolutely correct 👍. Mercedes has enlarged this hole somewhat in the second valve cover generation. But just a little 🙏🙏. Please do not drill completely. That causes big problems with sucked oil. Best regards 🙌 Michael from Germany
Does cross mixing different metals and scrubbing promote rust?
Hello Andrew Weaver, Yes, the valve cover on the Mercedes-Benz S Class W220 is made of magnesium. This metal will react with other metals and certain chemicals. Stainless steel does not react with magnesium. Aluminum is safe to use as well, but carbon steel and copper will react. Keep in mind that magnesium is very brittle and harder metals can case damage if over torqued. When using a cleaning agent, it's import to use a mild soap without acid. I hope this helps. Cheers!
Ah i see thank you for the insight
Can u show us how to remove coils and spark plugs and put them back on please.my clk430 needs new coils spark plugs n valve cover gasket is leaking oil, thank u
Cleaned mass air flow sensor as well as the throttle body
Clean with what? Spray? What kind?
Can you please link the the two hoses where I can buy those
Yes, here is the link
Crankcase Breather Hose kit for Mercedes-Benz: amzn.to/3rMylFx
I want to know what the actual bolt pattern is does anyone know it’s driving me crazy
is it necessary to remove the spark plugs just to replace valve cover?
Hello dilip dalal, not the spark plugs, but you will need to remove the ignition coil packs. I hope this helps. Cheers!
@@GarageDynamics tx.
@@GarageDynamics How important it is to remove and reglue
what you called "ATTACHEMENT" while replacing just the gasket??
you are using a wired brush?
A think a nice powerful steamer would do a good job too.
Hello JR Valdez, A steamer sure would be nice :)
Do you have a video or link for mb gl350 w166
Hello paul torres, At this time I do not have a video for the gl350 w166.
Gee, I wish we had a video for the older 420sel and other 126 chasiss.....
Do you put silicone on hoses for driver side?
im not sure about silicone but do you know the names of the hoses by chance that are said to tear easily in video so i can order?? thanks
@@BongJamesBong420 Here is the link for the hoses: www.autohausaz.com/pn/1120180182 and amzn.to/3b4cyzT They will also be in my description.
Hello Robert Gidron, Only apply sealing silicone to the breather covers that attach to the valve covers on both passenger and driver sides. You can use silicone spray lubricant for the breather hoses. The lubricant will not damage the rubber and will make application easier.
Will this work 4 a 2015 s550?
Hello Spinosaurus The Dinosaur, I believe the 2015 W222 uses a M278 engine. The engine in this video is a M113, so there might be some differences in the parts and procedure. I would ask the people at www.mbworld.org or a local certified Mercedes-Benz mechanic for more information. I hope this helps. Cheers!
Is it necessary to remove spark plugs when doing this?
Hello Bart Bu, You can keep the spark plugs inside the engine, but you will have to remove the coil packs and wires.
@Garage Dynamics thanks for your videos! Just started this job on my clk500, and I dont think id do it without your videos! Very appreciate, amaizing work ethic!! 🙏
Is it really necessary to apply some little bit of silicone on the face of the gaskets
No ,, a little between the gasket and the cover is ok ,,that is where they leak.
I would suggest buying OEM gaskets and careful cleaning, I just did my m112 ML320 with no leaks... I did not use gasket sealer on the main valve cover gasket ... I used MB high quality gasket sealer on the upper breather covers ... cleaning is of utmost importance it took about 2 hour just to clean the valve covers
@@outofthinair1 Done right 👍. The original Mercedes seal is = LOCTITE 5970. Wait at least 12 hours before the engine is started. Best regards from Germany from Michael 🙌
@@outofthinair1 still at it here, did you use the heat gun to the stuck pieces of the gasket off? They are tougher than I thought on mine.
@@sl5311 A small brass wire brush, brake clean and a lot of time is the only way to clean the gasket material off of the upper breather cover surface. As I said previously it took me about an hour for each valve cover. It is a pain in the butt to get the old gasket material off . You could try the heat gun to soften the gasket material but time and above average effort is what will get the job done. Best of luck on your project
lot aplication of silicone ? Look one of Honda only a few points of contact , for cost will be interesting ?
Mercedes Benz uses LOCTITE 5970 (BeVo list) Best regards from Germany by Michael 🙌
how long takes the job ?
Hello Luis Amaya, It depends. If you spend a lot of time cleaning like I did then maybe 2 or 3 hours. If you don't spend too much time cleaning then maybe less time. I hope this helps. Cheers!
Where are you located ?
I have some question how much for the charge if I go fix by the shop ?
Hello PhatSphouthalansy, thank you for considering to take your car to me, but I do not have a shop at this time. When I get one I will let you know 🙏
@@GarageDynamics I live Minnesota where do you live can you give me the address please
@@PhatSphouthalansy Unfortunately I don't have a shop at this time. When I get a shop to service cars, then I will let you know 👨🔧