JONSBO N2 external fan "mod"
Вставка
- Опубліковано 7 лис 2023
- Patreon: / peterbrockie
Twitter: / peterbrockie
IG (rarely tech related): / peterbrockie
Disclosure: Some of the links below are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
Stuff used in this video:
JONSBO N2 (5-bay, uses 120mm fan): amzn.to/40w0xNZ newegg.io/nc523632ba
JONSBO N3 (8-bay, uses 100mm/90mm fans): newegg.io/nc8f83fc58
120mm fans for JONSBO N2:
120mm fan grills: amzn.to/3FOzm7G
Recommended Noctua fan (NF-A12x25): amzn.to/49mzNUi
30mm thick Phanteks T30 fan: amzn.to/3FSqNbK
Cheaper Noctua option (NF-P12): amzn.to/49qrOp9
90mm fans for JONSBO N3:
90mm fan grills: amzn.to/3SvA417
Noctua 90mm: amzn.to/3SqvUaT
Current Filming Equipment:
Sony FX30: amzn.to/3uTmAzb
Sony A7IV: amzn.to/3uqGsdT
Sony FE PZ 16-35mm F4 G lens: amzn.to/3JjOdI5
Sony FE 35mm f/1.4 GM lens: amzn.to/3ootA4e
Sony FE 90mm f/2.8 G Macro lens: amzn.to/3bFBVYD
SmallRig RC 220D video light: amzn.to/3E2ZomO
SmallRig RC 120D video light: amzn.to/3YIzoXg
RGB Video Light: amzn.to/3eqVGGs (not my exact light, but similar)
Desview R6 monitor: amzn.to/34CfKUI
AmScope ME300TZA-2L Trinocular Metallurgical Microscope: amzn.to/355bIkd
DaVinci Resolve: amzn.to/3gm2fLR
Buy me a cup of earl grey:
Bitcoin: bc1qf5yzmguzxmx7wmal36ancfvqf34ge08juvtnfk
Ethereum: 0x1B2df497F1c3bDa4b952Bd3cE266Ccf9D3d6cc30
Chia: xch1qtmtxej0tz2c82wj45mu5ncsu4s6z7nageec44qmc0p4dqexdv7s4a4rlg
Ravencoin: RKtLSABkqdFHBSL2ntb1pdC3PVEuc8Dt2Q
Raptoreum: RSECAdkYjcrGh7BogBYjXdB3oaThYdyFxA - Наука та технологія
Good idea, and clean fan mod! Nicely done.
Thank youuuuu! This helped me a lot! Keep up the great work boss!
Another UA-cam video mentioned that you can install a 25mm thick case fan by using a right angle molex adapter, he didn't show how to do it though, do you think it's possible?
nice idea man. I have a n4 jonsbo and the rear fan is really terrible. I am gonna add try and add a 140mm like this,
Yeah, those 2 non-hot swappable drives on the side get zero air with them out of the airflow path and with all the PSU wiring there. I'm (slowly) editing my N4 review and I wasn't impressed over the N2/N3. :P
I built a blue iris machine in this case with a i9 12900k and 5 22tb hard drives 😂I just slapped on 2 fans that run at 5000 rpm because it didn’t matter if it sounds like I jet engine it just had to be tiny😂
Curious how old your amano are. :)
Young! I've only had them a couple months and they were super tiny when I got them. They've gotten really big, really fast - the female even had eggs goin'.
At least I don't have to worry about babies since they need backish water to actually develop.
But Fan PWM is controlled by N2 Backplane?
No. The backplane is full speed only. Just connect the fans to your motherboard or a fan controller if you don't want full speed. :D
@@PeterBrockie I will do what you suggest. thanks
Simply use right angle SATA cables and you can install a Noctua 15mm fan without problem. That's what I did
A Chinese company appropriates a Danish surname...and doesn't even use that name in the UK...
Why even bother with the grill? The odds of your fingers from inside the case hitting a running fan is nil. .
I think think it looks better on the outside, and on the inside it helps with keeeping the SATA and power cables out of the fan - especially if you're moving the case around a lot.
@@PeterBrockie good point. I probably only move my servers about once every 3 years, and they're usually off
@@SimonTekConley It's not so much about moving them when on, it's that you can move a server around and a cable inside moves and you power it up to a fan grinding noise. It's not common on a PC or a large server, but on smaller cases I tend to lean on the side of securing everything or at least covering fans.
Nice mod. Pretty simple.
I've done this with a SFF office PC.
Also turned into a kind of hot-rod for my ex. (had a Mad Max vibe to hit, after all the weird stuff I did with it lol bitch hated it)
Everytime it turned on, that top 80mm fan did a kind of 100% jolt. And then back to normal. Like an engine revving. idk why
Can you tell me what motherboard that is though? With 4 ethernet ports?? ooooh! 🧐
Running a simple motherboard which has 6 SATA ports (albeit from a 3rd party controller on the motherboard). Seems to work well so far. www.aliexpress.us/item/3256805460202704.html
I'm running proxmox with pfsense+plex+pihole+truenas+plex AIO.
That board seemed interesting for it.
But that cpu doesn't seem interesting for it lol
Pretty cool board though.
Your videos are awesome! Honestly one of the more thorough videos on YT!
Your videos are awesome! Honestly one of the more thorough videos on YT!