Lovely video. And a special thank you for warning people of the addition issue. I wouldn't want anyone to fall down this rabbit hole and have their families suffer as mine has. 56 machines so far.
I absolutely LOVE my old Singer machines. For me, I became infected when I inherited my Mom’s old Singer. It didn’t take but a minute or two to discover why my Mom loved that machine. The old Singers are WONDERFUL.
Yesterday I found a 1951 centennial edition portable singer model 128 in a dumpster. It’s in rough shape and it barely runs after having spun the wheel a few times. So I think it’s jammed up with old oil. I’m not concerned about collecting sewing machines as I’m just in it to prevent landfill. So I would like to sell it. But since I’m not an entrepreneur and I don’t have room to keep it around my condo forever. I will probably sell or give it to my local Sewing & Vacuum store.
Take the warning at the end seriously. One vintage machine only leads to another! I've somehow acquired some lovely specimens of the Singer 99, 201, 221 and 222. And that was on top of already owning an all-round Bernina Activa 230 and a Janome 8077. Whereas, one sat on the bottom shelf and the other in a cabinet off to one side this project now consumes the entire spare bedroom [no longer spare]. And I couldn't be happier. 😊
I’ve just bought a 1954 201k (Aluminium) sewing machine in a number 40 library table. I’ve watched a few of your videos to help me get it ready to use. They’re very helpful, if not, a bit addictive!! I’m so glad I saw you say to clean with oil, which I’ve done! I’m finding it very satisfying and can easily see myself buying more of these beautiful machines! Thank you for making these informative videos 😊
This was extremely informative!! Thank you very much. The very last comment regarding collecting sewing machines is spot on. It’s almost like a drug. There should be support groups geared towards this type of addiction. Keep up the good work making videos.
I really appreciate this video and have rewatched three times to ensure that I have a lock on the knowledge therein. I’m new at acquiring vintage machines, so this video is especially helpful. Thank you.
Lol I love the comment at the end of your video regarding the likelihood of the collecing addiction!!! I think my addiction has started and becoming advanced 😂😂 Thanks for sharing as always, much appreciated. Colin
I’m 20 machines into my addiction and have restored them all from various states of disrepair and still I learned valuable lessons from you well produced video - thank you!
Very good video. I suffer from the addiction! Thanks for the special instructions: I will put a piece of cloth under the foot, after using the machinessssssss. I want a 202, 66 and a 99. Will check on the 99, since I haven't seen any vídeos on this one.
The last three machines that I have overhaul just for fun I used up all of the thread that may have been on them and never had too much trouble with breakage I'm using thread right now that's probably 40 years old still in the package and it is like brand new it never breaks now I know there is some that are is bad but I haven't run into much
I agree, thread is more resilient than one might think. So far, I have had good luck with several lots of thread that came with vintage machines. If it doesn't run smoothly, it is always early enough to throw it away,
When I first watched this video, I had fewer vintage machines. I got a kick out of your content at the end, where you say that your first vintage machine is not likely your last. I now have seven vintage Singer machines! My oldest one is a model 27 treadle machine from 1895, and it sews beautifully. I tried a new leather belt,but still found that it slips. I found and installed an Amish-made rubber treadle belt. It solved the slipping issue. I recently acquired a 1915 model 99 with a hand crank. It has some play in the needle mechanism, so I need to address that before cranking it too much. I was so excited to get a hand-crank model, and a 99K at that! I live in the U. S. I am addicted, as you also mention at the end of the video. :) Thank you for your great videos.
The rubber treadle belt sounds great (I don't think we can get them here). I have heard of a steel spring belt but have yet to find one. And yes, they are addictive!
@@CurioByBSpokeDesigns Hello again. I have acquired yet another vintage Singer. This one is a 1929 66 in a very cool table. The machine has a knee controller mounted under the cabinet, and is my first machine to have that. The accessory tray in the table has spool pins and the bracket and original domed Singer oil can. I'm not sure how many more machines I have room for, but it would have gone to a thrift store if I didn't take it. These machines call to me to give them a good home. At least I think they do😋. Thanks for your great videos!
@@renitageorge9007 Congratulation! I love the knee operated machines! It seems rescuing this poor unloved machines is your calling! It's lovely to hear from you again!
Thanks for a great video and the many good tips, put my mind a bit at ease as an anxious beginner. Good to know there might be zigzag attachments for straight stitchers! And I hadn't heard about putting the foot and needle down on some fabric to rest - is that to even out the mechanical/gravitational strain on the parts? Should we be doing that with modern machines too? If one wanted to be a conservationist in the extreme should they also make sure the feed dogs are lowered?
it stops the needle getting bent or damage, especially if the foot pedal is stored in with the machine and it take pressure off the presser bar spring.
You're not wrong about it becoming an addiction. It's so hard to leave one behind. I have an affinity to collect and repair antique appliances. The hard part is selling the stuff. Not a lot of people have the use for gasoline powered table lamps, kerosene cook stoves / heaters or antique sewing machines. If they are it to destroy it for decorative purposes and pay junk prices.
I came across two old sewing machines today a Singer 66 and a J Collier and Sons. I paid £3 each for them with their cases. My last Home Economics lessons at school where I made a pencil case in the 80s are long forgotten, but when I noted these two old machines I thought I could make use of them and make my own fishing items. Came across your channel and ive learned a lot. Really informative and well produced. All the best for the new year ahead.
It is defininitely a good idea to replace the capacitors on the motor. That will reduce brush sparking and thereby significantly prolong the life of both the commutator and the carbon brushes.
I love your videos. Full of great information, straight to the point but mostly it's your very calm voice and delivery. It reminds me me of the Hitchhikers Guide to the Galaxy... Don't Panic...I'm about to tell you something "terrifying"... and in the end it all makes perfect sense.
Thank you for such a grand tutorial. Learned so much from just this one video. I have a 1928 Singer 66 treadle which has a motor attached. I also have a 1955 Singer 99k. I love these machines! I would collect them if I could. They are manufacturing excellence in my humble opinion. My treadle had a StyleOMatic 17 function attachment in the attachment box worth 5 times its purchase price. I call my 99k my, "Sprite." Such a great little machine. Superior to the Featherweight in my opinion. I subbed. Looking forward to more!
I'm glad you enjoy my videos. These are truly engineering marvels. To be working perfectly, sometimes over 100 years after they were manufactured is testament to that. I have to admit I have a soft spot for the 99s too.
I am in Michigan, US. When I first moved here in 1989 there would sometimes be seven or eight treadles and other fine vintage machines at the thrift shops at one time. Such magnificent machines. I remember one such treadle that had a bicycle type chain that opened and closed the machine. They were such gorgeous treasures. They could hardly sell them in those days. My children were young and there was little room to put one so I never bought one. I picked up my 99k in a little antique shop. When I got home with it I thought my dear spouse was going to be angry as I had traveled several hours to buy the 66 only a few weeks before. Was I ever wrong. My dearest had that machine oiled snd cleaned within an hour and was so taken with its excellent design and quality. I had wanted the 66 because it was already motorized and parts so easy to get. It had been meticulously cared for. I had it for over two years before I discovered the rarity and value placed on the Stlyle-O-Matic attachment. I admit I was quite astonished. The resurgence in appreciation for these jewels of yesteryear is to me very consoling. I hope I haven't bored you. I am so grateful to generous persons such as yourself who give their time to educate others. Blessings to you.
Bored? Not at all. I love to hear people's stories. I remember as a child we had an old Singer treadle in the garage. At a young age I worked out you could perforate paper with it to make toy postage stamps! I don't ever recall my mother sewing though. I had an appreciation for that wonderful machine, even at such a young age.
Ah... we were born when a child's mind was inspired by a different sort of neural stimulation. That is awesome! I was wondering if you could recommend a good guide or book on Singer/Simanco/Greist attachments. I have purchased several boxes at thrift shops. I made the mistake two days ago of opening more than one box at a time. So not sure of a certain piece that obviously is part of a multiple piece attachment. I have found certain sites with information but they are not comprehensive. Cheers!
Thoroughly enjoyed this video. I have the exact same Frister and Rossmann machine with the Egyption decal, it's in beautiful condition. I too have gained rather a lot of machines in the last 2 years, I need to down size.........😨it's become a habit....... and I've run out of room 😂😂. Thanks for sharing your time 😊☆☆☆☆☆
@@CurioByBSpokeDesigns ☺ I used to buy a lot in England where I visited countless times but now it is all a lot harder. There is not so much interesting stuff around here - we have no boot sales! Just the occasional yard sale.
Tony, what a great video. Very comprehensive !!!. This morning I used my dremel to clean the the badge on the machine I bought for practising, with very good results. Love your videos. Thanks for sharing !
Really enjoying these vids.. but can I ask you do a short one on how to make your own thread stand.. what kind of materials do you use? Is there a particular size required etc? Sorry to be asking lots of questions.. TIA
Thoroughly love your sewing machine videos. You have a wonderful collection. I've pared down my Singer collection to 12 (have a 221K with the UK voltage and a 222K with a Canadian 110v motor, +++, etc.) + 3 Kenmore (2 158.1040's and a 158.1755) & 1 blue Japanese zig-zag (side loading bobbin case) that was built like a tank and has a 1.5 amp motor on it. I used to have over 70-odd machines. Still wish I'd kept that Singer 66-1 back-clamping treadle, though. Made such a beautiful stitch and I had it thoroughly cleaned and it ran so smoothly. Oh well. Easy come, easy go. Best wishes. 😊🙏
We never got Kenmores her in the UK so I'm not familiar with them at all. I do love the back clamping 66 - so smooth! You never know, perhaps another will drop into your lap at some point!
Good morning Sir, you have the most amazing channel! I've been binge watching your videos since discovering you. I can't help but notice you don't have a video on a Jones sewing machine, are these machines unworthy?
No not at all! Jones made great machines and there certainly will be some featured in future videos. The original Jones factory was in Guide Bridge, Manchester - not far from where I live.
@@CurioByBSpokeDesigns Thank you so much for the reply, this is great news! I look forward to learning more about my machine. Cheers really appreciate your work!!!
I've just realised, I'm an addict. I have just rescued a 1938, 99k. My first vintage electric machine. It lives with my 16 Jones CS hand Crank and My 1901 singer treadle. All are fully working and beautiful to sew with, although, my treadle skills need improving. I'm after a Jones Electric D53 next.
👍🏻 ⭐️⭐️⭐️⭐️⭐️ Got a singer 99k yesterday, ( no motor) finding out how to operate my new toy, hoping to find out how old it is. glad I found your channel, great video ‼️ thanks
Affliction 🤣 I know I have it, but I’ve only just started! Started with my Mums old Singer. Yesterday I bought a 99K her in Australia. It seems to be in VGC. The box it sits on is a light colour and is missing the lid for the accessories compartment , are these available anywhere? Cheers
Welcome to the club! The lids for accessory compartments are not available new but it may be worth looking on eBay. Beware of buying parts machines - You may well find you don't have the heart to part them out and you'll soon be overrun!
Which attachments are rarer than others/more valuable? Was there ever a walking foot for quilting made that attaches to 66k or 201? Thanks! Learning so much!
Singer did make a walking foot. There's one referred to as a Penguin walking foot that is very sought after. I have only seen the in the states where they often have an asking price of $2,000! The Swiss zig zag attachment is also very sought after. A modern walking foot will work with a 66 or a 201.
@@CurioByBSpokeDesigns @Curio By B-Spoke Designs oh awesome that a modern walking foot will fit, sure will help my quilting! Ah what a price for the penguin!
I just acquired my mother in laws 15-91! Is it a good vintage machine? I have it at a: shop getting checked out and whatever repairs it needs. Serial number indicates it’s a 1948! Looked in really good shape But the cabinet was veneer and was a mess so my husband had to cut the foot pedal cord to get it out so that I could take it to the shop so obviously we’re going to need that repaired. And so does this also mean I will need a base in order to sell on it? I never want to sell it!
15-91s are great machines but make sure to get the wiring checked and sorted. They have the built in 'potted' direct drive motor. Yes you need a base for it!
@@CurioByBSpokeDesigns After researching vintage sewing machines I’m finding that the featherweight seems to be favorite of many quilters which I am just getting into. Should I bother with seeking a featherweight if I can find one at a reasonable price or just be happy with the 15 - 91?
The Singer Featherweights are really expensive - due to their popularity with quilters. Mainly as they are more portable. Handy to take to quilting groups. I have a video on the 221 Featherweight.
Hi, I have a Singer 91-15, the one with the pot motor. It came in a plastic case because the original bentwood box was destroyed. On Etsy I found a guy that makes new wooden bases and luckily enough I found a lid in good shape on Ebay so I bought both. I bought the hardware to attach the lid with the base but forgot to order and have the hinges that attach the sewing machine to the base. I bought the hinges but I need to know how to put the hinges into the base properly. Do you have a video showing this and if not is there any way you could explain or show me how to do this? I would appreciate it. Thank you for your Vintage sewing machine videos I agree with you the vintage machines are fine tuned machines, todays models are junk. Let me know if you can help or not. Elisa
The hinges on the cabinets and treadle tables are known as lollipop hinges, however, the ones on the cases are different. These go into a hole in the case and are fasted with a bolt from below. I hope this helps.
The 201 is one of the best domestic straight stitch machines ever made. The 201-2 has the direct driver 'potted' motor, more popular in the USA than in the UK.
Hello, can you tell me whether the Singer 99k spoked wheel is chrome plated or solid chrome? My old 99k's spoked wheel chrome, seems to have flaked off or am I imagining it? Is it just cosmetic and can be cleaned up? Can I bring back the shine even if it looks like its down to base metal? If so how do I do that?
@@CurioByBSpokeDesigns Thank you, that's much appreciated. Can I ask would it work to use a Dremel buffer on it do you think, or is there something else I could use?
@@viviennebolton4358 Yes, a dremmel would work. I tend to run the machine with the clutch disengaged to spin the handwheel and use steel/wire wool. Autosol is great for getting a final shine.
A vintage domestic sewing machine motor is very energy efficient. Most are rated from 60 to 75watts. You likely use more power with your electric jug making your cup of tea than you would use sewing a dress for the Grand Ball.
I have sourced a 1929 class 127 with a perfect sphinx decor near my home, but I dont know yet if it fonctionnes and have the bullet shuttle etc complete. And also, a perfectly working restored 15k from 1906. Wich one would you recommend if you do have a recommendation please ? It is for sewing clothes as a hobby. Thank you !!
Wait a minute , WHY AM I JUST FINDING THIS NOW ! If i would have known about the addiction part i would have just bought new pants instead of a sewing machine to fix old ones ....
Lovely video. And a special thank you for warning people of the addition issue. I wouldn't want anyone to fall down this rabbit hole and have their families suffer as mine has. 56 machines so far.
I dare not count them any more!
Collecting is like lays potato chips, you can't eat or collect just one (antique).
I laughed at those final comments about the affliction we seem to have in common. Too true!😊
I absolutely LOVE my old Singer machines. For me, I became infected when I inherited my Mom’s old Singer. It didn’t take but a minute or two to discover why my Mom loved that machine. The old Singers are WONDERFUL.
lol
Yesterday I found a 1951 centennial edition portable singer model 128 in a dumpster. It’s in rough shape and it barely runs after having spun the wheel a few times. So I think it’s jammed up with old oil. I’m not concerned about collecting sewing machines as I’m just in it to prevent landfill. So I would like to sell it. But since I’m not an entrepreneur and I don’t have room to keep it around my condo forever. I will probably sell or give it to my local Sewing & Vacuum store.
Take the warning at the end seriously. One vintage machine only leads to another! I've somehow acquired some lovely specimens of the Singer 99, 201, 221 and 222. And that was on top of already owning an all-round Bernina Activa 230 and a Janome 8077. Whereas, one sat on the bottom shelf and the other in a cabinet off to one side this project now consumes the entire spare bedroom [no longer spare]. And I couldn't be happier. 😊
It’s a happy affliction!
My first machine is a 1916 Singer 66,it's a great machine and this is great video. Very informative👍
They are great machines.
I'm dying to have an antique machine,thanks for all your informations.
You're welcome - Go for it!
Best overview I’ve seen! Well written, solid voiceover, and great editing. Thanks for making it.
Thank you! I'm glad you enjoyed it!
If I had room, I would be a collector for sure...
I’ve just bought a 1954 201k (Aluminium) sewing machine in a number 40 library table. I’ve watched a few of your videos to help me get it ready to use. They’re very helpful, if not, a bit addictive!! I’m so glad I saw you say to clean with oil, which I’ve done! I’m finding it very satisfying and can easily see myself buying more of these beautiful machines! Thank you for making these informative videos 😊
I'm glad you enjoy my videos and are finding them useful! The aluminium 201 and a number 40 table is a great combination. I'm sure you'll enjoy it!
This was extremely informative!! Thank you very much. The very last comment regarding collecting sewing machines is spot on. It’s almost like a drug. There should be support groups geared towards this type of addiction. Keep up the good work making videos.
We are there to support each other! Glad you enjoyed the video!
Thank you for saying about a thread stand. Now I know what the problem was.
Cross wound thread is a common issue. It's getting harder to fin stacked thread.
Oh dear another affliction is coming my way what joy
OUTSTANDING! Best buying instruction video on the internet!! WELL DONE!
Thank you! I hope you are keeping well x
I really appreciate this video and have rewatched three times to ensure that I have a lock on the knowledge therein. I’m new at acquiring vintage machines, so this video is especially helpful. Thank you.
Glad it was helpful!
Lol I love the comment at the end of your video regarding the likelihood of the collecing addiction!!!
I think my addiction has started and becoming advanced 😂😂
Thanks for sharing as always, much appreciated.
Colin
It IS an addiction - my new year's resolution is to be able to eat in my dining room again.... (guess what it's full of?)
🤣🤣
I’m 20 machines into my addiction and have restored them all from various states of disrepair and still I learned valuable lessons from you well produced video - thank you!
I dare not count how many I'm up to! I'm still learning something new every day. Welcome to VSM Anonymous!
Very good video. I suffer from the addiction! Thanks for the special instructions: I will put a piece of cloth under the foot, after using the machinessssssss. I want a 202, 66 and a 99. Will check on the 99, since I haven't seen any vídeos on this one.
Very through overview! Got to get back to tuning my thrift store 201...
The last three machines that I have overhaul just for fun I used up all of the thread that may have been on them and never had too much trouble with breakage I'm using thread right now that's probably 40 years old still in the package and it is like brand new it never breaks now I know there is some that are is bad but I haven't run into much
I agree, thread is more resilient than one might think.
So far, I have had good luck with several lots of thread that came with vintage machines.
If it doesn't run smoothly, it is always early enough to throw it away,
Thank you... I have just inherited the singer feather weight... I think? This video has been very helpful thank you
When I first watched this video, I had fewer vintage machines. I got a kick out of your content at the end, where you say that your first vintage machine is not likely your last. I now have seven vintage Singer machines! My oldest one is a model 27 treadle machine from 1895, and it sews beautifully. I tried a new leather belt,but still found that it slips. I found and installed an Amish-made rubber treadle belt. It solved the slipping issue. I recently acquired a 1915 model 99 with a hand crank. It has some play in the needle mechanism, so I need to address that before cranking it too much. I was so excited to get a hand-crank model, and a 99K at that! I live in the
U. S. I am addicted, as you also mention at the end of the video. :) Thank you for your great videos.
The rubber treadle belt sounds great (I don't think we can get them here). I have heard of a steel spring belt but have yet to find one. And yes, they are addictive!
@@CurioByBSpokeDesigns Hello again. I have acquired yet another vintage Singer. This one is a 1929 66 in a very cool table. The machine has a knee controller mounted under the cabinet, and is my first machine to have that. The accessory tray in the table has spool pins and the bracket and original domed Singer oil can. I'm not sure how many more machines I have room for, but it would have gone to a thrift store if I didn't take it. These machines call to me to give them a good home. At least I think they do😋. Thanks for your great videos!
@@renitageorge9007 Congratulation! I love the knee operated machines! It seems rescuing this poor unloved machines is your calling! It's lovely to hear from you again!
@@CurioByBSpokeDesigns Thank you. I just can't seem to resist them.
@@renitageorge9007 Me neither lol
Thanks for a great video and the many good tips, put my mind a bit at ease as an anxious beginner. Good to know there might be zigzag attachments for straight stitchers! And I hadn't heard about putting the foot and needle down on some fabric to rest - is that to even out the mechanical/gravitational strain on the parts? Should we be doing that with modern machines too? If one wanted to be a conservationist in the extreme should they also make sure the feed dogs are lowered?
it stops the needle getting bent or damage, especially if the foot pedal is stored in with the machine and it take pressure off the presser bar spring.
You're not wrong about it becoming an addiction. It's so hard to leave one behind. I have an affinity to collect and repair antique appliances. The hard part is selling the stuff. Not a lot of people have the use for gasoline powered table lamps, kerosene cook stoves / heaters or antique sewing machines. If they are it to destroy it for decorative purposes and pay junk prices.
@@farmboy4189 I’ve managed to stop myself from acquiring any machines, for now! It’s not easy and I may fall off the wagon at any moment.
I came across two old sewing machines today a Singer 66 and a J Collier and Sons. I paid £3 each for them with their cases. My last Home Economics lessons at school where I made a pencil case in the 80s are long forgotten, but when I noted these two old machines I thought I could make use of them and make my own fishing items. Came across your channel and ive learned a lot. Really informative and well produced. All the best for the new year ahead.
Wow you certainly got bargains there! Have fun with them, Happy New Year!
Correction after checking the serial number the Singer is a 99k
Very informative video, I'm greatful you made it. looking forward to my new addiction
Glad to be of help - have fun!
It is defininitely a good idea to replace the capacitors on the motor.
That will reduce brush sparking and thereby significantly prolong the life of both the commutator and the carbon brushes.
Invaluable! Thank you so much.
This is SUCH a useful video thank you!!
great video! thx for your hard work
I love your videos. Full of great information, straight to the point but mostly it's your very calm voice and delivery. It reminds me me of the Hitchhikers Guide to the Galaxy... Don't Panic...I'm about to tell you something "terrifying"... and in the end it all makes perfect sense.
PS. I just bought a 1919 Singer 66 and received it today. Thank you!
ha ha ha ha - I still hate the sound of my own voice!
Excellent video. Thank you so much!
So useful. Thanks
Fantastic video. Some great advice there.
Thank you for such a grand tutorial. Learned so much from just this one video.
I have a 1928 Singer 66 treadle which has a motor attached. I also have a 1955 Singer 99k. I love these machines! I would collect them if I could. They are manufacturing excellence in my humble opinion.
My treadle had a StyleOMatic 17 function attachment in the attachment box worth 5 times its purchase price.
I call my 99k my, "Sprite." Such a great little machine. Superior to the Featherweight in my opinion.
I subbed. Looking forward to more!
I'm glad you enjoy my videos. These are truly engineering marvels. To be working perfectly, sometimes over 100 years after they were manufactured is testament to that. I have to admit I have a soft spot for the 99s too.
I am in Michigan, US. When I first moved here in 1989 there would sometimes be seven or eight treadles and other fine vintage machines at the thrift shops at one time. Such magnificent machines. I remember one such treadle that had a bicycle type chain that opened and closed the machine. They were such gorgeous treasures. They could hardly sell them in those days. My children were young and there was little room to put one so I never bought one.
I picked up my 99k in a little antique shop. When I got home with it I thought my dear spouse was going to be angry as I had traveled several hours to buy the 66 only a few weeks before. Was I ever wrong. My dearest had that machine oiled snd cleaned within an hour and was so taken with its excellent design and quality. I had wanted the 66 because it was already motorized and parts so easy to get. It had been meticulously cared for. I had it for over two years before I discovered the rarity and value placed on the Stlyle-O-Matic attachment. I admit I was quite astonished.
The resurgence in appreciation for these jewels of yesteryear is to me very consoling.
I hope I haven't bored you. I am so grateful to generous persons such as yourself who give their time to educate others. Blessings to you.
Bored? Not at all. I love to hear people's stories. I remember as a child we had an old Singer treadle in the garage. At a young age I worked out you could perforate paper with it to make toy postage stamps! I don't ever recall my mother sewing though. I had an appreciation for that wonderful machine, even at such a young age.
Ah... we were born when a child's mind was inspired by a different sort of neural stimulation. That is awesome!
I was wondering if you could recommend a good guide or book on Singer/Simanco/Greist attachments.
I have purchased several boxes at thrift shops. I made the mistake two days ago of opening more than one box at a time. So not sure of a certain piece that obviously is part of a multiple piece attachment. I have found certain sites with information but they are not comprehensive.
Cheers!
Thoroughly enjoyed this video. I have the exact same Frister and Rossmann machine with the Egyption decal, it's in beautiful condition. I too have gained rather a lot of machines in the last 2 years, I need to down size.........😨it's become a habit....... and I've run out of room 😂😂. Thanks for sharing your time 😊☆☆☆☆☆
I keep saying I'm downsizing but they seem to reproduce! LOL who knows what will be next!
@@CurioByBSpokeDesigns NOOOOOOOOOOOOOO I can't get more 😢 till the next time 😂
Useful, informative and amusing.
Right excellent video. Informative and well explained.
Oh no I just bought a singer 66 from 1910 and now I want a 99 too...I didn't know it would lead to an obsession! They should come with warnings!
They definitely are addictive! Just don't even glance at a 221 Featherweight...
شكرا
Your videos are the best! You are right about the addiction: I keep saying no more machines and then there is the next one....
and there is no cure!
@@CurioByBSpokeDesigns ☺ I used to buy a lot in England where I visited countless times but now it is all a lot harder. There is not so much interesting stuff around here - we have no boot sales! Just the occasional yard sale.
@@Braisin-Raisin boot sales are not great around here these days.
@@CurioByBSpokeDesigns Things have changed a lot.
@@Braisin-Raisin They have. Boot sales are more like Sunday markets with lots of traders.
Really helpful advice, thank you!
Tony, what a great video. Very comprehensive !!!. This morning I used my dremel to clean the the badge on the machine I bought for practising, with very good results. Love your videos. Thanks for sharing !
I'm glad you found it useful. The machines are relatively easy to work on and you can achieve some great results!
Great tips.
Really enjoying these vids.. but can I ask you do a short one on how to make your own thread stand.. what kind of materials do you use? Is there a particular size required etc? Sorry to be asking lots of questions.. TIA
I was planning to make a thread stand video - very easy - or just use a jug as a makeshift one!
Thoroughly love your sewing machine videos. You have a wonderful collection. I've pared down my Singer collection to 12 (have a 221K with the UK voltage and a 222K with a Canadian 110v motor, +++, etc.) + 3 Kenmore (2 158.1040's and a 158.1755) & 1 blue Japanese zig-zag (side loading bobbin case) that was built like a tank and has a 1.5 amp motor on it. I used to have over 70-odd machines. Still wish I'd kept that Singer 66-1 back-clamping treadle, though. Made such a beautiful stitch and I had it thoroughly cleaned and it ran so smoothly. Oh well. Easy come, easy go. Best wishes. 😊🙏
We never got Kenmores her in the UK so I'm not familiar with them at all. I do love the back clamping 66 - so smooth! You never know, perhaps another will drop into your lap at some point!
bought a very nice model 99 for 20 dollars it's a fine machine
also have a 201 K payed much more for it love them
Really fascinating, thanks!
Glad you enjoyed it!
Very intresting, my moms mashine was made in 1904, according singer, should that be in 11 range?
If you have the full serial number you can look up the year and model.
Good morning Sir, you have the most amazing channel! I've been binge watching your videos since discovering you. I can't help but notice you don't have a video on a Jones sewing machine, are these machines unworthy?
No not at all! Jones made great machines and there certainly will be some featured in future videos. The original Jones factory was in Guide Bridge, Manchester - not far from where I live.
@@CurioByBSpokeDesigns Thank you so much for the reply, this is great news! I look forward to learning more about my machine. Cheers really appreciate your work!!!
I've just realised, I'm an addict. I have just rescued a 1938, 99k. My first vintage electric machine. It lives with my 16 Jones CS hand Crank and My 1901 singer treadle. All are fully working and beautiful to sew with, although, my treadle skills need improving. I'm after a Jones Electric D53 next.
Oh Alan! I’m afraid there is no hope. Im collecting another Jones this evening. Welcome to the club.
👍🏻 ⭐️⭐️⭐️⭐️⭐️
Got a singer 99k yesterday, ( no motor) finding out how to operate my new toy,
hoping to find out how old it is.
glad I found your channel, great video ‼️ thanks
Google Singer Serial Numbers and there is a website where you can look up the serial number to give you a manufacturing batch date
Why are there Egyptian images on these machines? Singer has one with the Sphinx also.
The world went mad for anything Egyptian in the early 1900s
Affliction 🤣 I know I have it, but I’ve only just started! Started with my Mums old Singer. Yesterday I bought a 99K her in Australia. It seems to be in VGC. The box it sits on is a light colour and is missing the lid for the accessories compartment , are these available anywhere? Cheers
Welcome to the club! The lids for accessory compartments are not available new but it may be worth looking on eBay. Beware of buying parts machines - You may well find you don't have the heart to part them out and you'll soon be overrun!
Which attachments are rarer than others/more valuable?
Was there ever a walking foot for quilting made that attaches to 66k or 201? Thanks! Learning so much!
Singer did make a walking foot. There's one referred to as a Penguin walking foot that is very sought after. I have only seen the in the states where they often have an asking price of $2,000! The Swiss zig zag attachment is also very sought after. A modern walking foot will work with a 66 or a 201.
@@CurioByBSpokeDesigns @Curio By B-Spoke Designs oh awesome that a modern walking foot will fit, sure will help my quilting! Ah what a price for the penguin!
@@katiem3477 Mad isn't it?
I just acquired my mother in laws 15-91! Is it a good vintage machine? I have it at a: shop getting checked out and whatever repairs it needs. Serial number indicates it’s a 1948! Looked in really good shape But the cabinet was veneer and was a mess so my husband had to cut the foot pedal cord to get it out so that I could take it to the shop so obviously we’re going to need that repaired. And so does this also mean I will need a base in order to sell on it? I never want to sell it!
15-91s are great machines but make sure to get the wiring checked and sorted. They have the built in 'potted' direct drive motor. Yes you need a base for it!
@@CurioByBSpokeDesigns thanks for your quick response!
@@CurioByBSpokeDesigns After researching vintage sewing machines I’m finding that the featherweight seems to be favorite of many quilters which I am just getting into. Should I bother with seeking a featherweight if I can find one at a reasonable price or just be happy with the 15 - 91?
The Singer Featherweights are really expensive - due to their popularity with quilters. Mainly as they are more portable. Handy to take to quilting groups. I have a video on the 221 Featherweight.
Hi, I have a Singer 91-15, the one with the pot motor. It came in a plastic case because the original bentwood box was destroyed. On Etsy I found a guy that makes new wooden bases and luckily enough I found a lid in good shape on Ebay so I bought both. I bought the hardware to attach the lid with the base but forgot to order and have the hinges that attach the sewing machine to the base. I bought the hinges but I need to know how to put the hinges into the base properly. Do you have a video showing this and if not is there any way you could explain or show me how to do this? I would appreciate it. Thank you for your Vintage sewing machine videos I agree with you the vintage machines are fine tuned machines, todays models are junk. Let me know if you can help or not. Elisa
The hinges on the cabinets and treadle tables are known as lollipop hinges, however, the ones on the cases are different. These go into a hole in the case and are fasted with a bolt from below. I hope this helps.
I have just found your channel and I have subscribed
Hi Joan! Lovely to meet you!
Is singer 201-2 model AH# good one? Please advise, thanks
The 201 is one of the best domestic straight stitch machines ever made. The 201-2 has the direct driver 'potted' motor, more popular in the USA than in the UK.
I have the model number but how can you find what the model is? So far I’ve only seen searching for model number to find the year.
You need the serial number and then google Singer Serial numbers. It will take you to the ISMACS website which will give you the date and the model.
I just bought a singer 128-13. Is there anywhere I could get the bottom slide where the bobbin is located
Facebook groups for vintage sewing machines are a great place to find parts and specialist companies
🚣🏴 I'm a beginner Fantastical video. Peace and love Rick
I'm glad you enjoyed it!
Hello, can you tell me whether the Singer 99k spoked wheel is chrome plated or solid chrome? My old 99k's spoked wheel chrome, seems to have flaked off or am I imagining it? Is it just cosmetic and can be cleaned up? Can I bring back the shine even if it looks like its down to base metal? If so how do I do that?
Some were nickel plated and some chrome. If the plating is flaking it will need sanding and polishing. It won’t be as shiny and will be a lot of work.
@@CurioByBSpokeDesigns Thank you, that's much appreciated. Can I ask would it work to use a Dremel buffer on it do you think, or is there something else I could use?
@@viviennebolton4358 Yes, a dremmel would work. I tend to run the machine with the clutch disengaged to spin the handwheel and use steel/wire wool. Autosol is great for getting a final shine.
it even safe and ergny efficient for you to run such a old appliance like that?
A vintage domestic sewing machine motor is very energy efficient. Most are rated from 60 to 75watts. You likely use more power with your electric jug making your cup of tea than you would use sewing a dress for the Grand Ball.
Loved your latest video - thank you for the helpful tips!
I am a beginner, do you think a class 127 with a long shuttle, not a round one. Do you think it is a good fit ? Thank you !!
The 127 is a great machine.
@@CurioByBSpokeDesigns thank you
I have sourced a 1929 class 127 with a perfect sphinx decor near my home, but I dont know yet if it fonctionnes and have the bullet shuttle etc complete. And also, a perfectly working restored 15k from 1906. Wich one would you recommend if you do have a recommendation please ? It is for sewing clothes as a hobby. Thank you !!
@@lauracrevel6078 the 15 is probably easier to use
@@CurioByBSpokeDesigns ok thank you. That's good to know.
Wait a minute , WHY AM I JUST FINDING THIS NOW ! If i would have known about the addiction part i would have just bought new pants instead of a sewing machine to fix old ones ....
Ha ha ha ha - welcome to the dark side...
I was thinking vintage as in the 1979s lol