Duramax 01-10 Kryptonite Wheel Bearing Install
Вставка
- Опубліковано 8 вер 2024
- New Duramax Key Tags! truckmasterdie...
Buy a Duramax Decal 👉 truckmasterdie...
kryptoniteprod...
Toolbox Widget 10% off! toolboxwidget....
Tool Headz Crate coupon code truckmaster 👇
toolheadzcrate...
www.hspdiesel.com
Coupon code: “truckmaster” save 5%
Ryan’s Diesel Service www.ryansdieselservice.com coupon code👉 truckmaster
Kodiak Truck North Prairie, WI coupon code 👉 truckmaster
Instagram @truck_master07
Channels to check out:
Rustbelt Mechanic (bed lined paint job)
/ @rustbeltmechanic
Bertrand850 Duramax on 40’s 👉 / bigstallion80
Duramax_diesel
/ @resurrecteddiesel
Mods done to the Truck!
EFI Live DSP5 Switch Idaho Rob
WCFAB Stage 2 Air Intake Kit
68mm Street Turbo Ryan’s Diesel Service
WCFAB YBridge
WCFAB Hot Side intercooler pipe
FASS Titanium 150GPH Lift Pump
FASS Fuel Sump Kit
MBRP 3inch Turbo Down pipe
Cat/muffler delete
PPE Race fuel valve
Ported fuel fitting
Transgo Jr Shift Kit
Resonator Delete
Egr Delete
Egr Cooler delete
Sinister Cat Fuel Adapter
Kodiak Truck Transfer Case
Kodiak Truck True Trac Rear end
PVC Reroute
PPE Stage 5 Built Transmission
Zone off-road upper control arms
PPE Stage 3 HD Tie Rods
6" Pro-comp suspension lift kit
5100 Bilstien Shocks
35/12.50/R20's
20x12 Vision Prowlers -51 offset
Trail Ready Front Bumper
Music by: suncloud
Boostautoparts 👉 boostautoparts...
Haloview Backup camera
Official site link: www.haloview.c...
Amazon link: www.amazon.com...
Not torquing the axle nut to the correct spec is why I went through so many bearings. I was way over tightening them and crushing the bearing and going through them one after another
Been there 3 times lol. Finally leart my lesson though...
And wheel bearings ain't cheap.
Same here. 3 wheel bearings before I figured out that you could pinch that bearing.
Why do you need a alignment after this installation
Just bought a 07 lbz and it needs all new front end suspension. You made it look like a car guy can do the job himself. Thanks for the video.
I had no idea you could preload, then torque wheel bearings with an impact gun.
Quite the beefy set of bearings! Great video!
You don’t need to remove the axle
Excellent Video Brother
I’ve done my fair share of wheel bearings and you make it look easy 👍
I'm trying to save up now for these im starting to hear a more distinct hum coming from front end probably about time to replace
Do these wheel bearings work for the rear aswell?
No
Awesome thanks 🏁 Great information again 🤠 Lmm in Colorado 👍
Glad to see you back with the how to videos.
Just ordered my Kodiak Truck tcase I'm pretty stoked
Looked like a fairly easy fix!
How about an update on these hubs now??
Still holding up 👍
Thank you I'll definitely let u know I'll pick one up today
You won’t be disappointed that’s for sure 👍
Where are your sway bar end links ??
Deleted ? To make room for tie rods ?
So many questions
Lol
You can get 1" or longer ones for lifted applications. But yeah I'm sure it rubbed on his big tie rods
Looks about the same as doing the wheel bearings on a Yukon just bigger and heavier.
I love kriptonite product I have them on my truck I have upper control arms and tie rod end and there steering product only thing I need to get replace is the front wheel hubs
Hey Truckmaster did the kryptonite hub covers come with your kryptonite bearings or did your order those seperate?
Always look forward watching your videos. Keep up the great work man!!
I'm pretty sure I read these bearings are Timken bearings. Only Kryptonite has a lifetime warranty. But since the cost is so much more they can afford to eat the cost if it fails outside of the Timken original warranty. I just bought the Timken ones from Rockauto. I'm pretty sure the box was labeled made in the USA too. I think it cost me $300 or so for both including shipping.
What about precision hub assembly?
I just bought a precision from oreilly for 280 including tax. It was my only option as I need the truck to be running Monday. I also ordered a kryptonite and it's suppose to be here 5-10 days. The precision box says made in China. Thinking about winging it on the bad bearing for the next week and then out the kryptonite on.
Nice and easy good video
You need longer brake hoses
The control arms look sick. I don't have to worry about them though with the solid axle. What are you thoughts on the suggestions on the ctrl arm install video about getting a new spindles and taking off the ctrl drop brackets?
You should have cleaned and painted your dust covers.
hey truck master have do you know where I can find replacement ecm connectors with out buy a new engine harness ?
Call Ryan’s diesel service I’m sure they can mail one out to you if you pay over the phone
Did you notice a difference from say a Moog or Timken wheel bearing?
All that work and put old nasty brake shields back on ? Bummer 😔
Nice bumber,,, who is the manufacture?
Trail Ready
Where does that big o ring that kryptonite sends you go?
Around the wheel bearing
ik you want that name brand product, but i just want to replace the bearings and not the hub assembly is that possible
Nope!
Are they Timken bearings? Fyi, Timken makes wheel bearings in China and USA now.
The Timken wheel bearing I just got for my '14 Ram 2500 were made in Spain!
@@monsterram6617 well that sucks, you can request USA manufactured.
Are the hubs better than moog?
Where can I get this hub kit
Truck Master , where did you buy your front & rear bumpers ?
I noticed that ya have a Daytona jack , what tonnage is it ?
My 2008 Duramax is stock and I won’t lift it but those kyrptonite kit should still fit mine ?
Hey man, new subscriber. Saw a vid from ‘17 with Black truck where you installed Zone Offroad upper control arms. This vid is a red truck that has Kryptonite uppers already. Can you link a vid explaining the difference or why kryptonite is better?
Now when you bought those I see them on the web site but it doesn't state if it's one or too so would I need to buy two of them or just one
I guess I'm asking do they come as a set?
You make this look so simple lol. Too bad I paid the shop $500 to do mine a while ago. Not next time
Truckmaster I need help my 05 lly duramax has one or a couple bad injectors its loping hard and just puffing black smoke I live in owosso and I see your in Perry where would u buy new injectors from please let me know I use this truck daily
Bobby Bushong check your fpr before you buy injectors
@@lochlanm8684 how do u check that to see if it's bad and it's right on the back of the cp3?
Also I have a wcfab y bridge on this beast hopefully I don't have to take it out to get too it that would suck
Bobby Bushong order one they are like 20$ and ya I think around the back of the cp3 I watched your vid and ya it’s definitely fuel knock - fpr is dirt cheap compared to injectors
Torque the axle nuts to spec. Not with the ol jiggle hammer
I should have shown that in the video my bad 🤗
the kryptonite
Rotted beat up dust shield and tightening axle nut with air gun.Really poor video.
Hey buddy, I love your rims, and the truck looks amazing, it’s awesome you actually focus on the internal components on the truck more than the external, that shows that you really care about the truck. But, with that being said, I think it would look great if one of the next external things you get are some bigger rims, the stance would look so much meaner, the offset is great though! Anyways, just thought I’d share my opinion, I love the work man! Been watching for a while, keep up the great work!
Alright so the mechanic I have it at out here in owosso says that it's the injector #2 stuck open he said it would be 1,000 bucks for a brand new one not a reman that's labor and material,fluid does this sound right to anyone I know the injectors only what 300 max is this guy just trying to take me
Call Diesel Pro’s Performance in Swartz Creek tomorrow morning i bet Matt can give you a better price
If you have a lb7 that’s about right though
I've got a lly
Thank you please let me know I'm a father of 3 girls every dollar is pretty well spoken for lol
I’m thinking it’s a 4 hour job book time 4x95 a hour equals $380 plus 300 it should be close to $700 with tax call diesel Pro’s I can hook you up with a better deal 👍 ask for Matt or josh
Hey wassup!? Nice channel....Wanted to know if you guys have any referral codes/promos codes for Kryptonite. Got my self a lifted 2005 Chevy Tahoe.
👌👍🏻
Why do you need a alignment after this installation