@@tomtdubz I'm hoping so!!! I'm literally away to try fit it this weekend (tonight and tomorrow once final paint coat is cured))so will let you know. Ill take videos as I do each section incase I get it right haha wish me luck bro haha (also there are no instructions with this one, doing it blind essentially 🤣🤣🙈)
@@tomtdubz okay so that went like a complete shit show haha the template I had didn't line up one bit and ended up drilling the holes twice haha should have listened to the guy above who said don't drill holes hahaha anybody know a welder??? 🤣🤣🤣🤣 used Sikaflex (tiger seal type stuff) instead lol
ambitionsskyyyy this is true, I had one fitted just with adhesive and a nice person decided to remove it... hence screwing this one into place too 👌🏻👊🏻
Thanks to everyone that has subscribed to the channel it’s beginning to grow. If you like the new video hit the like button and if you have hit the subscribe button either please do so, thanks 🤙🏻🤙🏻
Useful video! How easily can you remove the spoiler? I am buying a van this week with a spoiler but want to remove it to fit a bike carrier. AS far as i can tell bike carriers need to fix to the top edge of the barn door which is no longer accessible with a spoiler fitted. would really appreciate your thoughts.
Any need for the rubber gasket on there? Fitting mine this weekend and as you point out its less flush with the gasket on. Decided to just go with puraflex40 on mine, no drilling
@@tomtdubz cool, yeah just removed one of the gaskets and the fit was a lot better. Not sure of their purpose unless its to stop water getting to the holes and I'm not drilling so will leave them off. Cheers
manythanks . i should be ok thanks as have had the front off and done other stuff . am just sharing ur video to a mate u needs to see u video... cheers again for a tip top vid
Got my spoiler on order, due to arrive this week. Great helpful video.
@@mananddog.outdoors thanks for watching 👍🏻
Thanks so much for all the vids pal, just fitted my rear spoilers and I always find it easier watching someone rather than reading instructions 😂👌👌👌👌👌
No worries, thanks for watching, glad the video helped 👌🏻👌🏻
Awesome step by step guide. Couldn't see a video for Caddy spoiler install but yours gave me a good insight for fitting. Nice job!!
Thanks for watching, got to be a similar fit?..
@@tomtdubz I'm hoping so!!! I'm literally away to try fit it this weekend (tonight and tomorrow once final paint coat is cured))so will let you know. Ill take videos as I do each section incase I get it right haha wish me luck bro haha (also there are no instructions with this one, doing it blind essentially 🤣🤣🙈)
@@shug27210 lol good luck bro 👊🏻
@@tomtdubz okay so that went like a complete shit show haha the template I had didn't line up one bit and ended up drilling the holes twice haha should have listened to the guy above who said don't drill holes hahaha anybody know a welder??? 🤣🤣🤣🤣 used Sikaflex (tiger seal type stuff) instead lol
Noooooo where did the kit come from? I’d be on the phone!
Useful but invest in some cone drill bits for drilling sheet metal and center pop mark the desired hold first.
Decent step drills are a must 👌🏻
Please don’t drill holes in your van, just use adhesive. You will get future leaks.
Don’t right you won’t 👌🏻👊🏻
T Dubz not everyone can do it right, adhesive is much more fool proof
ambitionsskyyyy this is true, I had one fitted just with adhesive and a nice person decided to remove it... hence screwing this one into place too 👌🏻👊🏻
Doing this this morning, cheers for the help fella 👍
No probs, good luck fella 👌🏻
love the vw you have and your spoiler looks good, big fan on the dubs, nice job 👍
Thanks bud, 🤙🏻🤙🏻
Thanks to everyone that has subscribed to the channel it’s beginning to grow. If you like the new video hit the like button and if you have hit the subscribe button either please do so, thanks 🤙🏻🤙🏻
Where did you get the dub edition stickers on the wing .I'm after one for my mk1 golf.transporter looks amazing good job.
Thanks, Contact @dubzwings on Facebook 👌🏻
Useful video! How easily can you remove the spoiler? I am buying a van this week with a spoiler but want to remove it to fit a bike carrier. AS far as i can tell bike carriers need to fix to the top edge of the barn door which is no longer accessible with a spoiler fitted. would really appreciate your thoughts.
It’s quite easy to remove.. but of pull/shove.. but could take a while to clean up the glue.. depending on which one was used…
Did the drilling template come with the kit
Yep, came with all the templates, bolts etc 👍🏻
See the glue left over from your old rear spoiler what way did you go about cleaning it up for the new one? Thanks
Stanly blade… little bit of thinners, an then panel wipe.. the scotch pad the paint to rough it up slightly if your not using the fixings.
Hi seen this video the spoiler u fitted no only has adhesive can recommend one with the fixing bolts thanks
Thanks for watching. This spoiler kit comes with the screws I just chose to use an adhesive as I didn’t want to drill through the van…
Thanks for replying what do u think of the spoiler is it better then the one witch didn't last long ie is it stronger Thanks again
@@stuartcross749 it’s from Travelinlite.. to be honest they all come from the same factory anyway… good bit of kit 👍🏻
Really helpful 👌
Thanks fella 👌🏻
Very helpful thanks
Glad it helped, thanks for watching
Hi, Great video, who's spoiler is it? I like the idea of having a template.
Hi David thanks for watching, spoiler was from travelinlite 👍🏻
Any need for the rubber gasket on there? Fitting mine this weekend and as you point out its less flush with the gasket on. Decided to just go with puraflex40 on mine, no drilling
Don’t think there’s any need, gunna take mine off and re fit matte black soon, got a bit of time on my hands at the mo...
@@tomtdubz cool, yeah just removed one of the gaskets and the fit was a lot better. Not sure of their purpose unless its to stop water getting to the holes and I'm not drilling so will leave them off. Cheers
Where did you buy the spoiler from? Hoping to get one similar with the fittings and not just bonded!
This is from Travelinlite 👍🏻
We're did you get the spoiler from please
Travelinlite 👌🏻
ive had my spoiler for at least 2yrs .. its painted but crapping my self to put it on 😢😢
Get it done, if your anywhere near our workshop pay me a visit il help ya 👌🏻 bh21 6us
manythanks . i should be ok thanks as have had the front off and done other stuff . am just sharing ur video to a mate u needs to see u video... cheers again for a tip top vid
@@jamestastic70 thanks good luck with your build 👌🏻
Where did you purchase this spoiler from? Did it come in white already?
Got it from travelinlite, get most bits from there.. didn’t come painted I gave it a quick spray 👌🏻
T Dubz Thanks for your quick response 👍🏻
No probs, happy to help
Rad work mate always useful, have a browse on my vids if you like vdub upholstery! Subscribed dude
Will do bud, will be looking into re doing my rock and roll bed upholstery soon 👍
@@tomtdubz keep up the good work dude
a perfectly done job, the video shows accuracy, needs editing, please contact me. Thank you.
Thanks 😊
@@tomtdubz If you can mount it because I can't do it myself, please contact me. I live in West Yorkshire
@@stko4157 bit far, I’m based in the south, Southampton way…
@@tomtdubz Ok, if you can, I will give you a messenger contact. I have a lot of topics to do and I would not like to talk here
@@tomtdubz find me Stanko Va, if you don't find me please give your status thank you.
Just come across this channel.... Is it a rip off of g dub?
No, sadly not, I’m Tom, also have a sticker/decal shop called dubzwings made it easier to link the two somehow 👌🏻