I have no experience with brazing, but I do know the brazed metal I've worked around in the past had rust underneath the repair. So I think the probability of rust is similar for both brazing and welding. Treating the repair areas with things like zinc/phosphate coatings, seam sealer and epoxy primer should eliminate the possibility of rust in the future. Hope this helps and thanks for your comment!
If I remember correctly, all the patch panels we used on this project were under $300. Here is the link to the site to purchase the panels. www.rustreplace.com/home/1970-1972-monte-carlo
Excellent video
Any thoughts about brazing in the lower right seam inside the window channel where they are prone to rust?
I have no experience with brazing, but I do know the brazed metal I've worked around in the past had rust underneath the repair. So I think the probability of rust is similar for both brazing and welding. Treating the repair areas with things like zinc/phosphate coatings, seam sealer and epoxy primer should eliminate the possibility of rust in the future. Hope this helps and thanks for your comment!
Just wanted to know welder your using for this section
We used a Hobart Handler 125 Mig for this project. Thanks for your comment
How much does something like this cost? My 72 monte also needs that repaired.
If I remember correctly, all the patch panels we used on this project were under $300. Here is the link to the site to purchase the panels. www.rustreplace.com/home/1970-1972-monte-carlo