Nice, nice, very nice! Oh piece of candy.... CB360!!! Wow, how do you feel knowing that that your crazy new water pump is finally protected? That's a really nice bit of kit. Great protection for sure, and once again, props for mounting it right off the go!
Great stuff, #evotec. Easy to follow with the headcam. Hey, your zdf tv appearance gets a second prime-time air tomorrow (sat) evening on 3sat channel. Those are not on yt, but they have webstreaming of course.
Nice! I have both the Evotech frame sliders and the radiator guard...great stuff! Surprised you haven't opted to upgrade the forward turn signal assemblies to the scrolling, flush-mounted LEDs. Cleans the bike up a LOT, and one less thing protruding to get damaged if the bike gets dropped.
@@ducatinyc Apparently I haven't. And I totally get the one-at-a-time thing too. This shit starts to get expensive...this much I also understand all too well 😉
Have an Evotech radiator cover on my BMW right now. Seem like a quality group of people working there; they'll continue to get my support. If I got frame sliders they'd be Evotech -- they're one of the few mfgs who formulates their own plastic compounds for the sliders. Good stuff.
@@ducatinyc Original owner of my bike had Evotech cylinder head covers installed; I replaced them w/Machineart Moto covers. The brand isn't as important, just so long as we have something to protect our babies when they fall. And if going down at speed, insurance is still likely going to consider the bike totalled -- with sliders you typically have a much better chance of being able to ride it home.
Yea, thats kind of why I share these non how to how to's. Its more to show that its all easy and possible. Folks can use instructions for actual directions :)
I have read about others complaining about this and was concerned - i have NOT even noticed them on. Changes nothing for my knee positioning but I'm 5'9" - maybe taller folks w longer legs have issues?
Hello. I bought the Evotech kit and I've watched this video a few times to understand how to apply the kit to my Monster. But I need help, I have to buy tools and I don't know the dimensions of the screws to remove and apply, to buy them correctly. Can you provide this information? Please. Thanks.
i ended up greasing the evotech bolts with "Grease B" molybdenum grease per the shop manual because I noticed after a few heat/cold cycles and vibrations, the bolt would back out slightly at 90 NM. Maybe my torque wrench sucks though lol . Hopefully retorqued with grease on threads like the stock bolts will ensure it doesnt corrode and that it properly tightens
Отличный мотоцикл, поздравляю! Когда Ducati анонсировали его, я не оценил новый дизайн. Но все поменялось, когда я увидел его на дороге вместе с райдером. Он стал мне нравиться. К сожалению, не могу купить его вторым мотоциклом, не продав гипермотард.
Hey brother. If you want to loose some weight (belly) Ozempic your friend. I've lost 30lb +. I'm still loosing (and I need to). You don't have to be a diabetic for it to work (I'm Not). HTH I haven't felt better in years.
I've heard folks talk about it before, not a big fan of taking meds but might look into it. Truth be told my BEER belly is probably due to BEER. That is the only place i'm fat at.
Не вы не путаете ничего, я действительно родился в Москве и русский. Я сделал пару видео по-русски где я объясняю мою историю надо сделать ещё новенький
You are the first person to do a comprehensive, English speaking review of this bike, thanks. Good job!
Oh Im about to put on a proper 15,000 miles long term review as well :)
I love watching videos on how to unbox :). Going for a ride today and bringing the GoPro. Evotech is good stuff man. :)
Evotech is the truth :) Ride safe amigo.
Evotech is top of the line, dont cheap out on safety unless you're broke.
Never cheap out on safety gear and equipment.
Nice, nice, very nice! Oh piece of candy.... CB360!!! Wow, how do you feel knowing that that your crazy new water pump is finally protected? That's a really nice bit of kit. Great protection for sure, and once again, props for mounting it right off the go!
Had to plop it on there immediately, big fan of protection for bike and body. The CB is mint. So many CB's come thourhg Dirty Billy,
I am glad I am not the only one who drops his bike all the time :)
#evotech
It’s all part of the fun
Looking good. I have an Evotech radiator guard, oil cooler guard, and their tail tidy on my bike. It is the good stuff.
Thank you sir. I went with Motodynamic tail tidy, before I get a proper intergrated light and hide the plate away.
That's the very first thing I did with my bike as well. Evotech is the only brand I go with for ducati
I have no idea how some folks ride without sliders.
@@ducatinyc same people who enjoy watching money burn or don't wear gear while riding.
Great stuff, #evotec. Easy to follow with the headcam.
Hey, your zdf tv appearance gets a second prime-time air tomorrow (sat) evening on 3sat channel. Those are not on yt, but they have webstreaming of course.
Oh snap, awesome. Thank you for the heads up. Mmmmmaybe this means I'll get a bit more traffic.
Nice! I have both the Evotech frame sliders and the radiator guard...great stuff! Surprised you haven't opted to upgrade the forward turn signal assemblies to the scrolling, flush-mounted LEDs. Cleans the bike up a LOT, and one less thing protruding to get damaged if the bike gets dropped.
It sounds like you haven’t seen all the videos on my channel 😜😜😜 one can only do one mod at a time
@@ducatinyc Apparently I haven't. And I totally get the one-at-a-time thing too. This shit starts to get expensive...this much I also understand all too well 😉
@@burner188 yup yup, still got to do suspension exhaust and a bunch of other stuff. Turn signals were the cheap, an easy part.
Have an Evotech radiator cover on my BMW right now. Seem like a quality group of people working there; they'll continue to get my support. If I got frame sliders they'd be Evotech -- they're one of the few mfgs who formulates their own plastic compounds for the sliders. Good stuff.
After watching my 620 slide for 30+ feet and then I picked it up and rode it away I only rock Evotech.
@@ducatinyc Original owner of my bike had Evotech cylinder head covers installed; I replaced them w/Machineart Moto covers.
The brand isn't as important, just so long as we have something to protect our babies when they fall. And if going down at speed, insurance is still likely going to consider the bike totalled -- with sliders you typically have a much better chance of being able to ride it home.
They make great products. Looking good man.
Thank you much! And yea great quality
great vloggy vlog again!!!✌🏻✌🏻
Thank you very much
Yeah this was a good one! Thanks for sharing!
You’re very welcome and thank you for watching
I loved this one man. It's not an overly complex install sure, but it's entertaining. #evotech makes some flashy parts.
Yea, thats kind of why I share these non how to how to's. Its more to show that its all easy and possible. Folks can use instructions for actual directions :)
I got the evotec frame sliders for my s1000r last year 👍🏻👍🏻
I love the brand.
Have you noticed it feels slightly weird when you are pinching the tank with your legs?
I have read about others complaining about this and was concerned - i have NOT even noticed them on. Changes nothing for my knee positioning but I'm 5'9" - maybe taller folks w longer legs have issues?
@@ducatinyc I am also 175cm. After I fit these on, I felt the edge of the crash bar. I mean it is barely there.
Premium vlog. Premium Bike. Premium Brand. #evotech
Thank you all around good sir.
Hello. I bought the Evotech kit and I've watched this video a few times to understand how to apply the kit to my Monster.
But I need help, I have to buy tools and I don't know the dimensions of the screws to remove and apply, to buy them correctly. Can you provide this information? Please. Thanks.
Which specific step are you talking about because I’m not about to list every single tool you need 😂😂
@@ducatinyc for the bolts of the "main arm". the ones the connects to the frame. please and thanks
🇬🇧 🙌🏼🙌🏼
Handy man Duc! 🪛🔧 getting hands on
Saving them pennies.
@@ducatinyc best to do it yourself anyway. Better connection with your bike 🥰🤪
i ended up greasing the evotech bolts with "Grease B" molybdenum grease per the shop manual because I noticed after a few heat/cold cycles and vibrations, the bolt would back out slightly at 90 NM. Maybe my torque wrench sucks though lol . Hopefully retorqued with grease on threads like the stock bolts will ensure it doesnt corrode and that it properly tightens
Interesting. I have not checked the torquer specs since install. I should.
Remind me not to let you in my garage , I’m hiding my tools from you 😂😂😂
Good thing I got my own garage and tools 😂
Just out of curiosity, why don’t you use the motorcycle lift that’s empty right beside you ???
I use it all the time, but didn’t feel like it this time. Sometimes it’s nice to just sit on the floor.
Can you advise how to install the middle protection from Evotech or any link pls. As saw u see in mobile phone.
Not sure what you mean - this is the how to video for crash protection from Evotech.
Do those sliders dig into the knees?
I've heard of that but perhaps i'm not tall enough or something. So no. I'm 5'9"
Bonjour,
Puis je savoir d’où vient le support de plaque court ? Il est vraiment petit c’est top !
brand is called Motodynamic - i think i just replied to you on Instagram as well 🙌
That made me think of the Pepper Boy skit on SNL lol
Ha! Gotta rewatch that one
Hey Duc, any recommendations for armored pants? Keep up w/ the good stuff. Cheers from nyc!
I rock Resurgence Gear - Cafe Racer slim cut - my fave pants :)
@@ducatinyc Thanks a lot!
Duc, you might wanna put some blue thread lock on the bolts since the torque specs are so low
Not a bad idea.
Looks like rear ones can be used as spools for a stand, can't they?
Nope, the spools are separate.
Отличный мотоцикл, поздравляю! Когда Ducati анонсировали его, я не оценил новый дизайн. Но все поменялось, когда я увидел его на дороге вместе с райдером. Он стал мне нравиться. К сожалению, не могу купить его вторым мотоциклом, не продав гипермотард.
Thank you so much - yea, its a weird design but it grew on me quick. I love it. Can't go wrong with a Hyper, however.
Anytime, I hear somebody say they’re going to take a looksee. I think about that old classic movie “treasure of the Sierra Madre”
Hahahaha I gotta look that up - not familiar.
Have you had a chance to ride your new bike at night yet? How’s the headlight work?
Was just thinking this yesterday as I was riding in the dusk - that i have not rode this baby in the dark yet, at all :) So many firsts ahead.
hi, i want to ask you, where’s the workshop address? if someday i want maintenance my motorcycle
28 Conselyea Ave in Williamsburg. Hit him up on IG at instagram.com/dirtybilly_bk and tell him that DucatiNYC sent you.
@@ducatinyc thank you dude!
That is money well spent 👌🏾
100%
Trying to get rid of the Covid belly.
So far so good.
Hi
Hello!
Hey brother. If you want to loose some weight (belly) Ozempic your friend. I've lost 30lb +. I'm still loosing (and I need to). You don't have to be a diabetic for it to work (I'm Not). HTH I haven't felt better in years.
I've heard folks talk about it before, not a big fan of taking meds but might look into it.
Truth be told my BEER belly is probably due to BEER. That is the only place i'm fat at.
Приветствую, не видел вашей истории как вы попали в Америку и вообще интересна биография автора, или я что-то путаю и автор не русскоязычный)
Не вы не путаете ничего, я действительно родился в Москве и русский. Я сделал пару видео по-русски где я объясняю мою историю надо сделать ещё новенький
@@ducatinycнадо глянуть
i have evotech on my z900 cafe. looks good feels primo. idk if they work. thats a good thing. lol
Hopefully you won't find out but I assure you, from personal experience, these sliders are dreamy.