140 FPS in Microsoft Flight Simulator | RTX 4090 & DLSS 3 tested in 4K, including PMDG 737-700
Вставка
- Опубліковано 7 вер 2024
- DLSS 3 put to the test in MSFS with my ASUS RTX 4090 and it doesn't disappoint! Can it cope with ULTRA setting and the PMDG 737-700? (2D/monitor test).
CHECK OUT MORE ON THE 4090
6 Checks before buying a 4090: • 6 Important Checks you...
RTX 4090 first look in VR: • MSFS & RTX4090 | First...
WANT TO KNOW MORE ABOUT DLSS3
DLSS3 does have its limitations. To find out more check out this excellent video from Hardware Unboxed: • Fake Frames or Big Gai...
SIMHANGER UA-cam Channel Link: / simhangerflightsimulation
Join Simhanger on Discord: YOUR DISCORD INVITE: / discord
For more details visit Simhanger Website: www.simhanger.com
Connect with me on Facebook, Instagram and Twitter: @Simhanger1
✈ Would you like to support the Simhanger Channel? You can donate here: www.paypal.com...
✈ You could also buy me a coffee here : www.buymeacoff...
✈ Need corrective lenses and blue light filter for your VR headset, plus a 5% discount, then check out: www.vr-wave.st... get the discount using this code exactly as shown... simhanger
✈ Get 10% discount on Studioform Creative VR weights and straps to improve your comfort in VR visit www.studioform...
Enter discount code SIMHANGER (all upper case).
Everything you wanted to know about VR - Playlist here: • ESSENTIAL VR
Looking for help with MSFS, then check out my HOW TO GUIDES, link to playlist here: • MSFS HOW TO GUIDE
MSFS on Xbox playlist can be found here: • MSFS on XBOX
Thanks for watching
#microsoftflightsimulator #msfs #vr #flightsimulation #nvidia #rtx4090 #dlss3
I was impressed by how little artifacting I witnessed, signs and nameplates all good, a little on the rain, but that is evident in DLSS 2 anyway. A great start for DLSS 3, holding much promise for the future. Note DLSS 3 is not compatible with VR at the moment. Frame rates will be limited to the maximum refresh rate of your monitor, in my case 144Hz.
The improvements in ray tracing have made the cockpit clearer and images sharper and is
only the beginning. I too am excited about the near future. You might find this interesting about Ray Tracing history: ua-cam.com/video/NRmkr50mkEE/v-deo.html
But DLSS 3 will come for VR? I couldn’t find anything about this topic
No visible artifacts because the "AI" generated frames are based on two already rendered frames, so it's a "simple" matter of inserting an interpolated frame in between.
And this without ANY help from the CPU at all. DLSS 3 (and future improved versions) are the future. No doubt about it. Incredible technology!
So, it is useless when you need it. You are doing 72 fps and the card makes another 72 fake frames.
@@neumanix456 So, like TVs have been doing for years?
Brilliant video Mark! Thank you so much for investing all of the time to produce such a wonderful piece of content for our community!
Very nice I had i7 8700k and was stuck at 30 FPS Max at 4k ultra on my 4090 so just upgraded to i9 13900k so looking forward to playing the game at well over 60 fps in all its glory.
That upgrade will be a massive jump in performance (especially if you managed to get fast DDR5 Ram). In a week the new DDR5 7200MTs 32 clock ram should start trickling out and it is giving 100 -105 MB/s bandwidth where DDR4 3600 was hovering around 60 MB/s. to the CPU. All tests/reviews so far indicate a 4090 is being held back "cpu bound" by all but the latest CPU/ram combos at 4k which is were majority of flight simmers want to be in MSFS.
Thanks much Mark! 😊 Yes, looking forward to your VR experience!
I have a 5800X3D and RTX4090 and I can tell you was well worth it. The frame generation takes fps toa whole new level. I use TAA instead of DLSS because it makes the screens blurry. I'll wait till Nvidia releases the DLSS update but for now I get 120+ fps at level flight with Fenix A320. The game is maxed out at 1440p. Even on the ground I get well over 60 fps at a major airport with dense traffic. The card is a beast you can't go wrong!
I also have a 5800x 3d and a 3080ti. Is it worth taking the plunge to the 4090? I fly FS a bunch.
@@andybaez5696 if you don’t see the video, you’ll ask these type of questions. The RTX 4090 is worth it. I mean, if you can afford one. I personally go for a RTX 4070Ti, cost’s around 850$ (usd) and includes DLSS 3. But as i said, if you can afford one, get a 4090. I hope my answer resolved your question. Have a nice day Sr.
@@gonzohd773 if you cannot aford a 4090 get a 4070ti
Yea TAA is best if you want raw visuals and best quality. DLSS does make it blurry. All I need is a locked 50-60fps at max and i'm good! Lol
I have a 4070, TAA gives me a stunning image quality, in 2k, i agree with you... 100-105 fps...
Was flying around Cyprus recently, went into graphics settings and noticed my terrain level of detail was set relatively low, like yours was, compared to my Ultra settings. Turned it way up and was blown away by the difference in the terrain of the island. Since then, it’s become THE most important setting to me.
That's true.... the preset Terrain Level of Detail in Ultra is just 200.... i put it on 350 and the Terrain looks way better, the Performance impact is not quite big, too
LOD has always been the prime factor for quality of image (and FPS killer) for under powered systems. Going past 200 LOD is possible now because the cards have finally been given larger VRam (16 -24GB) when 3-4 years ago it was typically 11 and maxing out. The CPU side has just discovered this with the much larger cache being provided on new CPUs. That is one of the big factors in the 13900K improved perf over the 12900K (along with the jump to DDR5). Interesting to see the correlation with Ram (in all its forms on a system) and the recent performance gains.
@@zorbakaput8537 I’ve been simming since the first stick image sim on the Tandy. I’ve had every iteration of MSFS, and in all those years, I’ve always tended to avoid NYC, London, Paris, and Tokyo because the frame rates were so poor that even my usually high end flight sim rigs felt underwhelming when flying study level aircraft. The 13th gen CPU, the 13900 coming next week, is going to be the first time that is all about to change. It really is a great time to be alive.
I found that setting to be one of the biggest fps hitter, at least in vr, seems to hit mainthead quite hard, though it looks way better with it higher
Thank you for the details explanation. I’ve followed these settings and I do see an incredible improvement. Now I’m enjoying my 737-800 every single second
Glad it was helpful!
£1500 is a bit steep for a gain in fps which the human eye cannot detect.
The eye, maybe not, but my soul can feel stutters, lol. The 4090 uncrushed my soul a little, lol.
Thanks Mark for the impressive video and looking forward to your findings when flying in VR.
Coming soon 👍
Hi Mark
I would like to reiterate what Bill Scanlan has said in his comment below... What an outstanding presentation, clear and concise and to the point.
Very impressed with your work and very jealous of your 4090!
Well done and thanks.
This demonstration is very convincing! Thank you very much! I understood that latency could be an issue with DLSS 3 in VR, but apparently it isn't. I can't wait to receive the Asus TUF gaming RTX 4090 and experience it for myself! I am currently using an AMD Ryzen 9 5950X and if necessary I would consider upgrading my rig to an Intel Core i7 13700K or AMD 7000 X3D that is expected early 2023.
Note this demo/vid is on the flat…using the monitor. DLSS3 is not yet compatible with VR. See my VR test here ua-cam.com/video/DFj-7mDUOv4/v-deo.html
stick with your motherboard and ram - check out the 5800X3D - drops right in --- BEATS all comers in flightsim 2020 -- I just upped my 5600x to it --- next stop the 4090
@@aventuraalert8254 I can understand the jump from a 5600X to a 5800X3D. Upgrading a 5950X, however, gives a marginal gain imo. CPU L1 and L2 go down, only L3 goes up with 32MB. No overclocking for the 5800X3D!.Moreover, investing in a dying platform doesn't seem very attractive.
@@NowIsGold Maybe a bit late but using a 4090 with the 13700K and can only say it is an absolutly impressive CPU. I think worth waiting for the new 3D CPU's from AMD to see what sort of boost they will provide but then again there is always something else on the horizon though I have to say the 5950X is a mighty CPU...
@@vMaxHeadroom In the meantime I also bought a 13700K and together with my existing 4090 I'm impressed with the performance!
While I always appreciate your videos, it’s also worth noting that the absolute vast majority of people using the sim can’t even afford a 30 series card yet, let alone a 40 series card. It will be years (if ever) before most of us get a chance to use these cards.
I accept that, but always interesting to see and demonstrate new technology.
I don't think that's accurate. Do you realize how hard it was to get a 3090 or 30 series during the shortage?, and they are still selling like hotcakes. Plenty of people use the 30 series with MSFS. Don't sell the market and simmer's short.
@@SimHangerFS True. I will drool away & get another lotto ticket.
True have a lot of other things to waste my money on 😂
Huh? Speak for yourself. Of course many can’t afford things in life. This is kinda like someone that can’t afford something out of their budget for anything and then commenting about how they can’t afford it. Why even watch the videos then? You love gpus? I watch car videos that I can’t afford but I don’t whine about it in the comments. 😂🏆
Thanks for this highly anticipated review of the 4090 in MSFS! I'm also the proud owner of a 3090, but that DLSS 3 frame generator is making me mighty jealous. I've no plans to upgrade my GPU for a few years, but I'm already excited at the prospect of future GPUs rendering MSFS at even higher framerates. The days of 30 fps flight simming are certainly going to be behind us, and even lower end cards will be able to run MSFS better than my 3090 does now. Exciting times!
Lol here I am with an AMD card and still waiting for the first FSR release of Msfs
@@karmabasedj8184 And why would you buy an AMD card?
@@activex7327 Because AMD still has the decency to not make you sell your kidney to buy a gpu, unlike Nvidia
@@karmabasedj8184 Yes but than you pay 2 kidneys to AMD to release a decent driver.🤣😂😂😂
@@karmabasedj8184 didnt know i had to sell my kidney for 500 bucks to get a up to date gpu
Have the hardware. Just have too wait for the release. Can't wait. Thanks for the video.
Thanks for this, hopefully XP fanboys will stop coming after me saying XP12 has better or similar performance. Meanwhile at XP12: 30-40fps on a 3080 RTX TI and that's with lower graphical settings than in MSFS.
very high detail, very smooth, very pleasant to watch it though
Appreciate the walk through on the settings, I didn't realize you had to select frame generation, I thought is was supposed to just activate it automatically!
Mark, thank you very much for the another informative video. As I understood to be able to see DLSS 3 option in MSFS menu, I have to switch on Hardware-accelerated GPU scheduling . So I did so and this option of DLSS 3 is not available. I wandered about all of your system and MSFS settings, because I’m not getting such a good result with my RTX 4090. Looking forward to seeing a new video from you covering this subject. Thank you!
Me to… also have no frame generation
Remember when "30 fps is all that’s required for a smooth experience in MSFS"? Yeah I told myself that too. Until yesterday when I snagged my own 4090 Founders Edition at MSRP. Now I want all the sweet, sweet VR frames I can get!
It is TOTALLY AMAZING!!! 👏🏻👏🏻🤩 Thank you very much for this great comparison review! 🙏🏻💪🏻 👋🏻 Greetings from 🇪🇸 Spain.
Hola 😀
@@SimHangerFS Hi 😉😁
Windows 11 crashed my MSFS over and over and over, when back to 10, everything is right with the world now.
Although frame generation does boost fps by almost half, it also has downside. When inside cockpit and panning views quickly, there is a flicker that occurs in the image. It looks like a screen tearing effect. Also, DLSS has a shimmering effect. So at the moment TAA is still the best quality you will get and personally, I didn’t get my 4090 so that I can get 100 fps with image issues. I’m happy with 60 fps and rock solid graphics quality.
Try enabling vsync in the nvidia control panel for flight sim only. I believe the vsync in game may be greyed out, well it is withing spiderman remastered. So forcing it on in control panel then syncs fps to your monitor refresh rate.
@@MrMatthew1992 It’s got nothing to do with Vsync. i run a gsync monitor. This is an issue with frame generation among other issues with DLSS. Thanks though!
@@MustafaGT Yep spot on, its a frame generation issue not a vsync issue.
Exactly. It makes no sense to me to spend a crap load of dough in the best hardware just to compromise on visual quality for extra "fake" frames. But to each their own, of course.
I experienced this with my 3060. Especially while using the FMC and stuff, the image quality is visibly ruined for just a boost of 5-10 frames.
I really wish I could afford one of these cards. Flight Sim in VR is one of my main sims, and I am playing on an RTX 2070 currently.
Cracking video. Thanks Mark. Looks really impressive and as you say, can only get better.
Thanks for the review. Now a VR session to see if will buy it ^^
DLSS 3 will be implemented on 2000 and 3000 cards as well, but it won't have the same efficiency because the 4000 has extra hardware for that function. Right now it's one of the most important driving factors for 4090 sales, so Nvidia will likely wait a good while to make it available to everyone else with an RTX card.
Yes, I didn’t mention it as I can’t find anything definitive from Nvidia on this. 👍 I am not sure about the 2000 series however.
@@SimHangerFS Probably top cards only like 2080 Ti -)
@@itftcomputers seems now series 2000 cards will be excluded from DLSS3 unfortunately according to Nvidia.
I need this 2.. now first let me sell a kidney 😂
😂
I thought you were in VR I was getting excited there 140 frames
Wow. Guess I better start saving!! 🤯
My 5 monitor sim needs a serious boost from my 3080! 🥵
Thank you for the vid. Would you mind doing a test with some addon airport scenery and the PMDG?
I too would like to see this. 4k, ultra, pmdg 73, at night, rain, and at KORD. Oh with traffic too. I want to see Mark’s system stretch it’s legs.
What I am seeing is MS/Asobo needs to work on thread optimization to allow for better GPU usage. The nice part is that your space heater isn't going at full tilt, but there is still room for about 30% more performance gains.
Maybe when direct access to the gpu comes out, it might fix these issues and reduce latency as well I hope.
Agreed, note the power draw during all my tests were within 10% of my 3090!
So for real, no artifacts, no hard-to-read glass cockpit, no HUD issues, nothing? There were some other 4090 reviews that complained about some artifacts from frame generation, just making sure. It seems almost too good to be true. Give me a reason to not spend that money. :)
I didn’t say no artefacts, but they were few and far between. HUD was very good, not sure if this was the 4090 or SU11?
@@SimHangerFS but you didn’t see a dealbreaker, that’s good. With DLSS 2.0 at first I thought the more blurry font made it too painful to use. It is more blurry but I still end up using it because the performance is much better. I think the type of HUD elements where you see an issue with DLSS 3.0 is eg POI markers floating in mid air. But I have those turned off anyway, I’m much more concerned about being able to clearly read G3X or G1000 fonts.
@@marionetteworks note your fps will be defined by your monitor refresh rate.
@@SimHangerFS yea that’s not an issue, I use a 120 Hz VRR display :)
Thanks for this Mark- as usual, very useful and informative.
The "fake frames" of DLSS 3 do not help for "fast twitch shooter" games because of the slight increase in latency between what your eyes are seeing versus what is happening in the game engine. For those games, the difference between 40fps versus 80fps of "true frames" is a 12 millisecond improvement from something happening on the screen to the player being able to react. The frames generated by DLSS 3 don't impart that advantage to the player. But for a flight sim, it's perfect to smooth out the visualization.
Additionally, these 'fake frames' will do absolutely nothing to ease the already struggling real(!!) game engine - e.g. if it struggles to maintain 30fps, it's will still struggle to maintain those 'real' 30fps frames. A struggling game engine is something fake frame injection isn't going to help with.
Dlss 3.0 is a great feature. For me mfs runs 50-70 fps in 3440x1440 resolution on ultra without dlss above New-York city with 4090 and 5800x. Then I use just frame generation tech and get 100-140 fps without noticing any visual glitches. Now I hope this feature will also be added in VR mode also
Thank you very much for this video. I'm currently waiting for delivery of my rtx 4090 (switching from 4070ti) My CPU is i714700kf and 32 gb of ram. I sincerely hope that with 4090 the photogrammetry in 4K won't be an issue anymore and that I'll be able to fly in London and Naples in pmdg 737 / fenix a320 without any problem,
Teasing us VR pilots! Looking forward to your VR analysis, I have seen one ‘credible’ UA-camr with a G2, I’m sure you’ll not be disappointed. For now I’m staying with my 12900 + rtx3080ti + G2 & Windows 11 (22h 2), very happy with the recent improvements, using DX12 quality, HAGs ON…… looking like SU11 will bring further improvements to the Sim and now Nvidea has its eye on MSFS I’m sure there are going to be further improvements.
Check out my VR test here ua-cam.com/video/DFj-7mDUOv4/v-deo.html
With that setup are you aiming for 45 fps ‘higher quality’ with reprojection? I’m looking to get back into VR Flying and have a similar setup (3080Ti, Ryzen 7700X, Quest 2)
I just made the difficult decision to sell my Mac Studio Ultra and move to PC, coming out of denial regarding it not being able to perform with gaming applications. I'm a flight sim enthusiast, flying heavily on XPlane. The PC that I will have next week has the 4090 as well as 13th gen Intel CPU, and I have had my hopes high that DLSS3 would deliver, given that MSFS (and XPlane) are CPU single threaded applications even to this day (the bottleneck). Your video has given credibility to the shift I have plotted, and obviously I will be putting MSFS on the new system. Can't thank you enough for your time invested in helping all of us with this level of sharing. I certainly will keep my eyes on your content moving forward. Cheers. Kirk, Michigan, US
Thanks Kirk, make sure your selected monitor has a high refresh rate as dlss3, like all other applications of this type, are limited to the monitor refresh rate. My demo was on a 144Hz monitor 👍
@@SimHangerFS I have the Samsung Odyssey neo g9. 5120 x 1440 240Hz. I noticed in XPlane it listed 60 and 120Hz at this resolution. With the forthcoming PC I have also ordered DisplayPort 1.4a compliant cabling, which I believe will not hinder it. Does this sound ok?
@@KirkRoyster it couldn’t be better! 👍
@@KirkRoyster yes, I am, all okay my side so far and I was careful with the bend. Strikes me as a poor design. Corsair are bringing out a new cable end Oct and I will get that as soon as available.
@@KirkRoyster yes…keeping my eye on it.
I have an 4090 and 13900ks, over Tokio with a Jet on almost ground level, (normal Dlss off so i play on native max out settings (higher then Ultra) with dlss 3 on) btw 105 and 125 fps. Dlss 3 is amazing.
That FPS is totally impressive especially considering maxed at 4k. Also, don't forget the Radeon 7000 series coming next month. Those will be very strong competition for the Geforce 4000 series.
Nvidia has always been better for FS than AMD.
The 7000 doesnt have frame generation so it wont come anywhere close to the 4090 for FS.
SUPER NICE ! and thanks so much for the video Mark. I am waiting for mine …popular card and I missed the first ones guess to low on the list but now close to the top of the list andvI hope to be getting that email saying it’s in. This Hobby just keeps getting BETTER!!
I have an almost identical setup to yourself, and am using the same beta version. I have found the blurry displays using any type of DLSS is still too much of an irritation to ignore. I get almost the same results, with much sharper cockpit displays using TAA, and frame generation on.
Same here, went back to TAA. I’ve seen online that Asobo is working on excluding the instrument displays from DLSS sampling, so if that does come in, then I’d go back to DLSS
TAA + Frame Generation should be the best of both worlds right now no?
@@OCX600RR is frame generation an MSFS video setting?
@@samsnook100 Yes. On the beta only at the moment. You can sign up in the Xbox Insider app.
@@OCX600RR Yep. Seems that way. It's certainly given me the very best results.
If the price wouldn’t be THAT high for the exceptional performance in flightsimulation 😢
This week I’m going to upgrade to a 5800x3d (still use my 2080ti) on a 2560x1080p monitor.
I’ll stick to full hd as I can’t afford those high prices for only an GPU.
Great video an well explained, thank you very much!
The 5800 is one of the best for MSFS!
@@SimHangerFS
I’ve just installed it and FPS increase about 30-50%. Wow 😮🙂
Thanks for the demonstration, however I could still prefer to use active flight pause until the entire scenery gets fully loaded and rendered, but I'm still perfectly fine with 4k 100fps on a pmdg :D
that's a performance we've never seen or expected from this sim since FSX
I have a 4070 100-105 fps on TAA 2k, with exceptional image quality...❤️👍
it necesary to have activated HAGS in windows?
For DLSS 3 yes otherwise DLSS 3 not available.
I really hope DLSS 3 becomes VR compatible eventually... soon... now.... =D
Me too!
Thanks for the video. I hope Nvida will be able to make something similar to dlss3 for vr. We really need it!!
I love your videos 👍 clear informations, full understandable, directly to the point. Thanks a lot. Looking forward on a VR video 3090 against the 4090. Beside all the fps comparability, in my opinion it’s more important how the own feeling is, how much smoother a flight is (in high quality), no stutters, no terrain pop ups,…the feeling of the real flight.
But hell..the costs. $$$ 😳 Vario Aero, Intel 13th generation, Nvidia 4090, …soon it will be cheaper to make a PPL Licence and buy an used Cessna 172, than to investigate in my rig 🫣😂. Well, happy flights Mark and thank you for your videos ✈️✌️
Thanks for the detailed review Mark
DLSS managed to quadruple the performance with resolution upscale and frame injection
Wow
I have seen alot of artifacts for instance, inside the cockpit letters and text are harder to read with DLSS on. It feels like it has some blur on it. Yes it increases FPS but it looks in my case alot worse. I use the 2070 super and 9700k 32 gb ram.
Yes, me too with DLSS2. Asobo are aware of the issue and working on a solution. In SU11 (beta), it does seem a bit better, but not perfect.
To be honest, this has very limited use for MSFS. The actual sim calcs are still running at the original frame rate which is really what matters in how the plane feels and flies. The generated frames don’t take in to account any actual control inputs and environmental factors. While the generated frames make fast moving action appears smoother, it doesn’t make much visual difference to a slow moving visual like MSFS. I’d put your money in to a faster CPU before I paid to upgrade a 30 (or even a 20) series GPU. The generated frames do smooth out VR a bit, but that’s a limited use case.
I would argue you don’t need more that circa 60 fps for a valid control input that would reflect RW input and response. What is lacking for many simmers is the frame rates to provide a smooth and seamless flight.
@@SimHangerFS Totally agree... And in fact, 30 fps is probably enough for that seamless experience non-VR. The objects on screen don't move far enough to perceive much difference above 60fps. Hardware Unboxed did a really good analysis of DLSS3.
It would of been nice to see what the 3090 was actully doing with MSI Afterburner and DLSS2
Good vid. The big BUT is the cost of the card is way tooo expensive for what it is. I personally carnt justify it yet. Especially all the other costs for a bigger case and maybe a new power supply. My big suggestion to people looking for a new card mabe look at the 30 series jue prices drops. Also AMD are announcing ther new card very shortly so if it’s cheeper than the 40 Navidia hand may be forced to drop price or do something.
I agree, series 3000 cards remain a very viable option 👍
Thanks Mark always very helpful. I am upgrading my system (five yearly and my old GTX1081i still, packs a punch). I plan to buy this card. My question, are there even better graphics cards coming in the near future?
Nothing from Nvidia until late 2024 would be my guess… but who knows 😁
@@SimHangerFS Thanks! Lastly I’ve seen very little recommendations etc for a good monitor to work with the 4090. Any thoughts?
@@KEITHGEE1000 select a monitor size to suit you. Recommend a minimum 120-144hz to get the best impact of the fps. Higher is better. 1440p or 4K. I’m a fan of LG and Asus.
@@SimHangerFS many thanks!!!
Thanks for the video comparing different planes and showing us the GPU usage. Great data for me to decide which GPU to go with my Ryzen 5600X inside a SFF case.
At the complex airports or inside the 737 cockpit, your 4090 is only loaded to around 50% so I'm probably going to pick a 4000-series which is 30~40% slower than the 4090.
Remember to gain the full benefit from DLSS3 make sure your monitor has a refresh rate of 120hz or above 👍
Great video review. You mentioned near the end about possibly changing to Windows 11. What would be the advantage of this for MSFS2020 ??
Jerry
No clear advantage, but graphic updates within windows will be focused more towards the newer OS?
I need this and a full sim motion chair then ill be satisfied
🤣
Good morning! I am yet to receive my 4090, so i cant see the options for DLSS3 yet. In the beginning of the video you mention that DLSS3 is only available on DX12? Is this correct or are you just using DX12 because it renders better fps and smoothness??
Only on DX12.
Excellent Mark! Your MSFS content is superb.
I would like to see the performance in VR 🙏
Check this out ua-cam.com/video/DFj-7mDUOv4/v-deo.html
@@SimHangerFS nice one would like to see more with pmdg heavy airplanes in heavy sceneries. Thanks
yep i am impressed by this
Actually, the OSD comes from RivaTuner Statistics Server, which is just bundled with MSI Afterburner.
It can be installed without MSI Afterburner and further customised. 😉
Great video once again. Any chance doing a triple screen test to see what the performance is using the PMDG over London.
Thanks for this insight. It’s really useful :)
If you have a 4K TV, just play at native 60fps and enable the motion flow settings on the TV and it will do the same frame manipulation at 240 fake fps 🙂
Hi, wow!!! I have got 3080ti and i9, and I have never get more than 60fps on PMDG 738, in London city max 36fps. How do you get more than 100fps????
What about with inibuilds EGLL and FSLTL? Please test REAL scenarios, with the proper approach set up in FMC etc.
Actually, interpolation and reprojection (extrapolation) are very different things. DLSS3 basically holds back the next true frame, generates an in-between one and then pushes both the interpolated and the truly rendered one whereas reprojection works without having the next true frame ready because in VR, you need lower latency above all else.
Also, VR reprojection only works with fixed refresh rates since the constant frame interval allows you to know in advance how far into the future to extrapolate current motion vectors which you can't possibly do with variable refresh rate since you don't have a reliable timeframe to calculate towards. DLSS3 frame generation circumvents this by waiting for the next real frame and doing the interpolation between that new and the previous frame, giving visually better results than reprojection/extrapolation, however coming at the cost of latency. And this is the reason why DLSS3 is probably not for VR unless they make a miracle happen.
Anyway, great vid! :)
You're really good with MSFS-2020 , quick question: In task manager I hardly have any utilization of GPU or CPU (5%/10%) and heading into a terminal at LAX my frames were struggling at 25 to 30 , which was red-lining the FPS counter. I have the injector & GSX in community, that's it. Can't figure this out.
WOW :) so no visual bugs with DLSS 3 ? the smoothnes of Heathrow and PMDG is awesome .. with some VATSIM traffic i expect about 60 which is still very flyable . But i have only 3080Ti so only DLSS 2 for me after nvidia and asobo fixes bluriness .
Excellent explanation. I am really tempted to join the Beta.
Thank you Marc and take care.
Hi, have you taken the plunge yet?
@@SimHangerFS 4090 yes; SU10BETA no😁
Excellently informative as always. Thanks. We need someone checking out cutting edge tech.
Wow good one
I'm impressed by the power draw, my overclocked 3080 uses far more
Darn, time to get out the plastic. Great review
Hi Mark, do you have a Gsync monitor ? If so, you need to have Vsync forced on in NVCP in BOTH the global and MSFS 3D settings for it to work properly and Vsync off in MSFS in-game settings. This makes a huge difference in smoothness. I have the identical 4090 and a 10900k.I am at 4 k and on SU 11. I find DLSS3 quality still gives noticeable blurriness of glass cockpit displays compared to TAA. I find virtually no difference in frame rate using TAA but much clearer displays. You can get around the blurriness by moving closer to the displays but it is not a natural position in the cockpit (I’m a real world 737 pilot btw). Anyway I have found almost the same results and the next huge uplift will be either 13th gen Intel or the 7800X3D from AMD.
I have a gsync compatible monitor and and it’s on. I tried also with it off….very little difference with DLSS3
Not sure if the small MSFS update 1GB this week has anything to do with it, but i can see FPS in the 130-140's in developer mode now, obviously with DLSS 3 and Frame Gen on, i can't tell you how great it is to have the sim run so smooth with so muchhh detail, even rendering higher than 4k and downscaling still good FPS with TAA or even No AA looks fab!!
Very interesting thanks.
The 4090 is so big, heavy and power hungry that I wonder if the 4080 will be the best option.
Then, come tomorrow, and everyone'll be dissatisfied with 140fps and be hankering for 280fps. I'm chugging along at 30fps on my GTX1080, thank you very much. I don't think im missing much. Most I'm gonna do for now is upgrade to the RTX3080Ti but that's mainly because my EVGA has fried.
A 3080ti will provide a massive performance improvement. Great card.
@@SimHangerFS Thanks for the reassuring words, mate. Love your channel.
I found TAA with frame regeneration checked on works best for me. The DLSS 3 looks weird.
Great video, thanks.
I was considering upgrading my CPU but this looks like a better option.
DLSS 3 also means you'll be under utilising your GPU, so can probably get away with a 4080, even 4070?
Yes, agreed.
i imagine once nvidia sorts its 30 series issue with massive inventory we should see this dlss 3 come to the 30 series.
Hey@ please Load up pmdg in klax and full traffic and test dlss3 . Thats how u stress test it . Please do another video and show us.
Great review Mark! Can you please explain the reason for pauses and microstutters? I’ve never been able to wrap my head around what causes them 🤔
Great video-info! Thanks!
I get 140+ fps at 1440p with a 5800x3d and a 3070 , using multi monitors...3 of them.
Wonderful performance….no need for you to upgrade then 😀
Great video Mark. I just built a new PC for the sole purpose of running MSFS2020. Coming from a i9-9900k and a RTX 2080ti, I elected to go with the AMD 5800X3D and not the newer Intel or AMD. Since MSFS is still primarily a Single Core program, My research with fellow MSFS2020 user praise this CPU. Since my new 4090 Suprim Liquid is on back order I am using the 2080 for now and Wow! What a difference this CPU makes over the 9900. Can’t wait for my 4090 to arrive. Keep the videos coming. One favor - would you do a video on the selections you have chosen for RivaTuner? I’d like to emulate your setup. Thanks
The 5800X3D is one of the best current cards for MSFS
@@SimHangerFS I think you meant CPU. And yes, it even outperforms or nearly outperforms Intel 13th Gen in some apps but as for MSFS it was a no brainer.
@@MrScott_e sorry, yes, cpu 👍I have graphic cards on the brain 🤣
I just bought it myself aswell coming from an 8700k and yes huge performance difference can finally select 200 lod in the fenix now! Fsltl is still a bit of a struggle though hope it sees some optimizations soon.
@@MrScott_e Apparently the x3d has it beat over dense photogrammetry cities like New York and London but the 13900k beats it in lower scenery and over water etc I know which cpu I'd prefer to have in said situation.
I have an aorus master 4090 with ryzen 9 7950x and 64g corsair dominator platinum and I'm not getting good preformance or FPS and it's saying I'm limited by main thread
Monster set up! The single core limitation is really starting to show up now!
this is needed for DCS!
Thank you for your video. How is your experience with the RTX 4090 and heavy AI traffic, e.g. FSLTL with 100 IFR aircraft? Do you still get 60 FPS at Ultra settings?
So no instrument blurriness with DLSS? Is that a improvement with SU11 or is something related to the graphic card?
To be honest I’m not sure. I think SU 11
What's the best VR for this game please? Also it says 21% CPU load, so does it use single core only or what? Thanks for the VIDEO
I recommend Reverb G2 headset or Quest 2. MSFS is predominately single threaded unfortunately.
You Dollared down !....That's great. However even the 11900K would perform better than the 10900K. All the people that tested the two CPU's did not take into the account that the 1190K has more than the CPU power and frequency to beat the 10900K. The 11900K features they did not take advantage of are firstly the PCIe m.2 / 4.0 lanes ! effectively speeding the data to the cpu....with that is also another new feature exclusive to the 590 chipset ( 11th gen only ), that allows a direct slot ! That in conjunction with 5100 mhz ram ( Increased ram speed greatly enhances MSFS) which the 10900K cant even use 4400 mhz because of the inferior memory controller....and the 11900K makes a significant improvement over the 10900K at 4K in MSFS
Agreed, just can’t afford an upgrade now after forking out for the 4090
@@SimHangerFS coming from a 10900k I wouldn't fork out for the 590 chipset and an 11900k the increase just wouldn't be rational to spend that kind of money... Maybe when the 14900k comes huh....lol
Cheers mate! Any smoke coming from your box?
Not yet 🫠
@@SimHangerFS That's good news. Unrelated question. Do you use the map? With dx12 I get better frame rates with it outside of window on a different monitor but when I adjust the size it keeps crashing.
@@GreggRoberts yes I do, but haven’t tried popping it out to my other monitor recently. (SU11).
4090 performance uplift looks great and only the elite few will enjoy the uplift. Hoping Asobo improves on the current DLSS 2.0 especially the blurry cockpit displays. Hopefully they know the majority of us are still using 20 series and 30series cards. That being said I will not be giving Nvidia another dime!
DLSS3 is likely to come to 3000 series in 2023.
Outstanding report and review, thanks for your time and effort producing this video. Was there any problem with physical size of the 4090 vs 3080 in your computer case? Thanks again Mark!
Check my case and card here ua-cam.com/video/DFj-7mDUOv4/v-deo.html
As always Mark, thank you for great info!
Mark, The million dollar question does DLSS3 work in VR?
It was mentioned DLSS3 is not supported right now in VR.
No, it doesn’t. Check out my previous video for vr performance, still mightily impressive
@@SimHangerFS I am going to make the jump to the 4090 when Varjo sort out the stuttering problem.. I am also going to upgrade the CPU to the 13900k hopefully this with help with the CPU thread issue in MSFS. I am looking forward to your indepth VR testing using the 4090.
@@Macbrowndog coming early next week!