How to disable 2006 Toyota Matrix DRL
Вставка
- Опубліковано 6 вер 2024
- To disable the DRL daytime running light. Locate the running light box on top of the gas and break pedal. Slide it back to remove it. Cut the red/white cable locate to the bottom left of the 2 fat wires. or top right of the 2 fat wires. Depends on how you hold the box. Thats it!
I love you bro
Thanks buddy, helped me 7 years later the internet is a crazy place.
This Works...I just Tried it...Fairly Simple...You Need it when installing HID's.
thanks bro it worked on my 05 matrix..i had to remove the panel under the steering wheel but it was really easy its only 3 screws, oh and like one guy said on the comments my cable was more pink than red....thaks again...
CR1SP3RLOCO Does this helps for interior lights on dashboard, as well?
Work for 2008 toyota corolla too
Much appreciated sir been having trouble with my HIDS. This helps!
Press F to pay respects! No more burning through bulbs!
If you read all these comments they will only confuse you. I have a 2005 Matrix and the Toyota OEM wiring manual so what I tell you here comes directly from Toyota. I advise not disturbing the box under the dash. You can disable the DRL by simply grounding a wire attached to a switch on the E-brake handle. The color doesn't matter because there is only one wire so no confusion over color or pin number. The switch is actuated by pulling up on the handle and has two functions. First, it will disable the DRL ONLY if the ignition switch is OFF. Second, it will illuminate a small "BRAKE" light on the dash to tell you to release the E-brake. The switch does this by grounding the attached wire. When the engine is started and the brake released the wire is ungrounded and the DRL are enabled. To permanently disable the DRL simply ground the wire to any convenient piece of metal. This will bypass the switch. The bad news is that the dash brake lamp will be on whenever the ignition switch is on. I'm sure it will eventually burn out. Of course you will need to remove the center console but on my car there were only four hex head bolts. Pretty simple. Much better than crawling under the dash and working with one hand. Good luck.
Noooo dude, just cut the wire and go to sleep, it's simple.
@@waltermendoza1949 They aren't all the same, DUDE. Just because it was simple on yours doesn't mean it is that simple on all.
This worked for my 2005 Toyota Matrix XR. Simple and effective
This is fantastic. It really worked. Welldone for this brilliant job.
Thank-you this video really helped me out. I got so tired of burning through bulbs..
WC u have to cut it. Put it out will be hard to put back in. at least if u cut and u can reconnect them together when you want it back.
I must have cut the wrong red/white wire because now when I turn my headlights on my dash lights cut off.
Thank you so mucho it work on my 2008 matrix
I can’t find the blk box for my 2009 matrix... where did u find urs?
Mine actually looked a little more pink than red; Cut off pin 12, it's the red cable with the white stripes. On the cable, the white stripe is thinner than the red stripe. It's literally right next to the two big cables. Don't get it confuse with the white and red cable (white cable with thin red stripe)
Didn't work on my 2003 matrix. Lights still stuck on
I have a 2009 matrix. I can’t locate that black box that you were talking about....is it a new setup for 2009 model?
thanks man it worked perfect
WELL DONE MAN!!!!!thank you
2003 toyota matrix xr.worked perfectly
That works great helped me out a lot thank you.😃
Thanks for the help works great
Nice video thank you
Some say red and white and some say it's the yellow wire. I have a 2005 corolla type S. Which one should I cut? This is confusing do you have to ground one end? Thanks guys
It worked thank you!
thanks ...wonder what the yellow wire does...I cut it yesterday after watching some other video ...but nothing happened ......hummm ....
Worked, thank you!
It's works thanks 😊
Work for 2009 matrix????
does this work for interior lights on dashboard, as well?
I don't like shift gear lights on during day.
if so, What is light switch working for id low beam lights turn on anyway?
is the same to TOYOTA MATRIX 2004
Awesome. Thanks
After we cut it off we don't want it on. Now I can put my hid head light on it.
My 2007 vibe work im not sure if automaticly on but most imp, for me is NOT on all the time only when i did turn on thanx for help ,,,,ребятя ето работает на моем вайбе
Must I cut it? Can I pull it out?
why not just remove the fuse wth
How do you know which one
Wouldn't it be easier to remove the bulbs?