Відео

I love you bro

Can you tell me if my uv lamp lights not working how to fix

bad Video , did not show to wire harness or anything

I need help with my up lamp , I bought a new adapter and it still just flickers and lights won't stay on ! What can I do!? Please help if u can tell what I can do ?

Work for 2008 toyota corolla too

I have a 2009 matrix. I can’t locate that black box that you were talking about....is it a new setup for 2009 model?

Work for 2009 matrix????

Thank you so mucho it work on my 2008 matrix

If you read all these comments they will only confuse you. I have a 2005 Matrix and the Toyota OEM wiring manual so what I tell you here comes directly from Toyota. I advise not disturbing the box under the dash. You can disable the DRL by simply grounding a wire attached to a switch on the E-brake handle. The color doesn't matter because there is only one wire so no confusion over color or pin number. The switch is actuated by pulling up on the handle and has two functions. First, it will disable the DRL ONLY if the ignition switch is OFF. Second, it will illuminate a small "BRAKE" light on the dash to tell you to release the E-brake. The switch does this by grounding the attached wire. When the engine is started and the brake released the wire is ungrounded and the DRL are enabled. To permanently disable the DRL simply ground the wire to any convenient piece of metal. This will bypass the switch. The bad news is that the dash brake lamp will be on whenever the ignition switch is on. I'm sure it will eventually burn out. Of course you will need to remove the center console but on my car there were only four hex head bolts. Pretty simple. Much better than crawling under the dash and working with one hand. Good luck.

It's works thanks 😊

Can you make a video to show how to fix OPI GEL LIGHT.! Bc my gel light not pop up.!

Thanks buddy, helped me 7 years later the internet is a crazy place.

It just sents url to apple tv and play

I've been watching and doing a lot of research and e eeyone out there doesn't explain how to do this properly. I'm going to explain it to you and hopefully it'll answer all your questions instead of these people who make the videos don't even respond back or give a poop about you cutting the wrong wire. Ok this will disable your DRL also know as daylight running lights so you can have full control over your headlights without all the automatic turn on stuff. This will work for the 9th generation 02-08 Corollas. I'm going to make this as simple as possible u like these so call guys making the videos not really telling you the whole steps. *The DRL module box is located underneath the steering column. If you craw under it and look up you will see it. It's a black rectangular/squareish box. That is your daylight running light/headlights box. What you do first unplug the white clip, (now do this part which is very important) otherwise you won't know which wire to cut. After unplugging the clip what you wanna do is pull up on the black box and take the black box out before cutting anything. The black box is crucial because this will determine which wire to cut. On different years is different wires. But the main thing you have to do to make sure is no matter what year it is ALWAYS pin#12. After taking out the black box after unhooked it you look at the inside of the box and there should be numbers inside. Don't worry I'd you don't see pin#12 because it won't be on it. But they have the other numbers in there and you should be able to tell where pin#12 is. They skip every other number for some reason but you get it. So whether the wire you're trying to cut is all red with a tiny strip which is right next to pin#1 &2 which are the big fat red and beige color ones or the yellow wire JUST MAKE SURE you look inside the black box and see where pin#12 is located? Mine is a 2005 Corolla S and mine is red with the tiny stripe. All you do is just cut the red and white stripe wire and use some electrical tape and tape both of the cut ends. THATS IT!! THATS ALL YOU NEED TO DO! This is for the red and white stripe wire. For the yellow wire which is usually for 02-04 models I believe is the yellow wire and from what I see researching I find that you have to cut the yellow wire and tape the end and ground the one coming from the clip/module. I'm not sure about this since mine is a 2005 and I did not do it that way. But to be sure just MAKE SURE YOU LOOK INSIDE TYE BLACK BOX to see where pin#12 is in your Corolla? If you your pin#12 is the yellow one I advise you to just cut it and hop out and turn your car on and see if the DRL is disable? If so great it worked if not then follow the steps to ground the wore coming from the module/clip part and make sure you tape off the other end. Ok, I hope this is more clear then some of these videos that are made on UA-cam and the internet. If you have any questions please feel free to ask? Thanks and drive safe and take care of your Corolla.

Some say red and white and some say it's the yellow wire. I have a 2005 corolla type S. Which one should I cut? This is confusing do you have to ground one end? Thanks guys

Awesome. Thanks

This worked for my 2005 Toyota Matrix XR. Simple and effective

idi wow

Nice video thank you

damn, so many fans calling him gay in comments for making an airpod video 😂

My mother thought I was face timing a boy I- 👁👄👁

Press F to pay respects! No more burning through bulbs!

How did you do this please send me what you did.

Thanks for sharing this information with us I've been to 3 different shops for e liquid all to 100ml and to 50ml bottles when I go on line to see the e liquid it was meant to be form the UK but it says Malaysia on the back of eh of the bottles ????? Take it there fake e liquids this is why vaping is going down hill because to many fake nasty E liquid thanks so much for sharing this information about the e juice with us 👍

Awesome? I doubt it.

It’s because there grease on them clean them and your hands ?

Thank you. I don’t think your gay and I understand what your saying.

Y’all are clowning this man saying he’s gay but like what’s wrong with being gay? Homophobes-

Boy you did horrible it didn't work for me

Lol what is this video

you dont need this cration they fit you perfectly without your creation

Please

Hi can you show how u made it

Video fcking sucks

Good job

the amount of toxicity in these 13 other comments is actually appalling..

Thank-you this video really helped me out. I got so tired of burning through bulbs..

It’s a good idea, but when you think about putting it in your bag or purse, wouldn’t it still scratch the case?

Thank you this was helpful 🐢🖤

😊

Great job man I support you

So bad

Nice thank you

thanks man it worked perfect

Works on me

Good idea

Your ears are nice

It worked thank you!

This is fantastic. It really worked. Welldone for this brilliant job.

Thanks for the help works great