TECSONAR silk dual color PLA Filament review
Вставка
- Опубліковано 1 жов 2024
- On this episode of Crazy Will Tech Show, we will review TECSONAR silk dual color PLA Filament. TECSONAR reached out to me to review the silk dual color PLA Filament for 3D printing. I am using a Creality Ender 3 and Fokoos Odin5 F3. I tested this filament for 2 weeks to see if its just a pretty filament but also to see if it was functional and prints well. I did a lot of prints, some small,
some big and some very complicated prints. Watch this to see what I have found out with the beautiful silk dual color PLA Filament.
Prints in the video
Vase #707
www.thingivers...
Wavey Modular Mushrooms
www.thingivers...
Red-Eyed Crocodile Skink - Articulated
www.thingivers...
Baby Dragon Dice Guardian
www.thingivers...
Joy Fidget
www.thingivers...
Brain Circuit CPU Holder w intel logo
www.thingivers...
Follow me on
www.tiktok.com...
/ crazy_will_tech_show
Now buy TECSONAR Multicolor PLAs at big discount-
Triple Color PLAs
Save 20% each with prime member coupon, save additional 10% each if you buy 3, volume discount: 20%+10%=30%
Reg.Price: 32.99
Lowest Price: 23.09
Start Time: 09/30/2022 12:00 AM PDT
Expiration Time: 10/07/2022 11:59 PM PDT
www.amazon.com...
www.amazon.com...
www.amazon.com...
www.amazon.com...
Dual Color PLAs
Save 20% each with prime member coupon, save additional 10% each if you buy 3, volume discount: 20%+10%=30%
Reg.Price: 29.99
Lowest Price: 20.09
Start Time: 09/30/2022 12:00 AM PDT
Expiration Time: 10/07/2022 11:59 PM PDT
www.amazon.com...
www.amazon.com...
www.amazon.com...
www.amazon.com...
www.amazon.com...
Leuke video's
Ben mij aan het verdiepen in 3D printen, mijn vraag is
Kan ik zelf ontwerpen maken in CURA ?
Cura is niet gemaakt om ontwerpen te maken. Ik gebruik www.tinkercad.com, het is gratis en je kunt nauwkeurige ontwerpen maken. Als je meer op zoek bent naar sculpturen of figuren, probeer dan www.blender.org, het is ook gratis.
@@CrazyWillTechShow is proberen he, Bedankt
I got a 1kg print im going to do soon. So i wanna make sure im getting the best results without waste of money or pla. I want my print to be smooth as possible so I was thinking of printing in .12 layer hight. Have you tried higher quality slicing? Does the color change work as well or should I stick with standard hight .2? Any help with this would be great thanks :)
It prints good a little tougher than other stuff I’ve used. As far as the layer height I did a short where I show the difference. Don’t feel it’s really worth it go with .2. But that’s just my opinion.
@@CrazyWillTechShow thanks a bunch. Im pretty sure that's the rout I'm gonna go. its a 7 day print with .12 vs a 4 day print at .2 so i feel safer with the .2 any ways. I was leaning for the .2 but i wanted a 2nd opinion.
all 3 of those have been in my amazon cart for 2 weeks now lol
Lol get them you won’t be disappointed.