Good point about skimmer flaps (weir gates). When taking on a new pool it's one of the first things I look at, making sure they are in place and working correctly. If they are stuck down or missing, the vast majority of the water going into the skimmer is sub-surface level. Floating debris (dust, dirt, pollen, leaves) will go right past the skimmer, and sink eventually. The weir blocks off most the water allowing only about the top half inch or so to get in. Surface tension draws nearby debris into the skimmer. Properly working weir gates can make a huge difference in the pool's cleanliness.
My above ground pool was green but after several shocking several times , vacuuming and running the filter it is now blue and levels are good. The problem is it’s cloudy and the CYA is at 0 with a test strip but about 30 at the pool store. I had added CYA 3 days ago , liquid in the skimmer. They are saying leave it alone but it’s still super cloudy. I clean the filter 2x a day - but it’s pretty clean w the exception of some small particles from pine trees. Any advice. Chlorine on the strip is also slightly high but not at the store test. Help!!
So what if your pool is clean and it has chlorine in it but the top layer of the water has tiny debris? I’ve been trying to learn how to service my pool for a while now but I never really understood why the top layer never gets perfectly screen. I’m not sure if it’s the skimmer that just doesn’t have enough power to suck up the debris or what.
i've tried getting the pool cheat sheet but never get it via email. i'm signing up for the newsletter like it says, can someone explain what i'm doing wrong?
My pool was green like a pond. Used liquid Chlorbrite two different times. Killed algae, have stable levels of chlorine and all other levels. I have used Flocc two different times, exactly like directions. Waited 24-48 hours both times. Nothing has fallen and pool is still light blueish green cloudy. Any thoughts?
When you added the floc did you change the circulation to recirculate? The filter should be bypassed cause otherwise, the floc is being filtered out as soon as you put it in.
Hey! Some ppl say you should not use Flocculant with filterballs? Is that correct? They also says that about ClearPool (which I guess is what you call Clarifier). Do you know anything about that?
It's the same reason you wouldn't want to use floc with a cartridge filter: you need the floc to bypass the filter medium (on backwash). Any floc going through your filter medium, like a cartridge or filter balls, will stick to and ruin it. If you can bypass your filter (like a backwash or drain port), you should be fine!
My free chlorine and combined chlorine are both high. So I added non chlorine shock. But I feel like I should have added a cal hypo shock instead. Can I still add that or do I wait 24hrs?
You don't need to wait that long to add chemicals after adding non-chlorine shock. Test your chlorine levels after adding the non-chlorine shock. And if the combined chlorine hasn't come down, you can use chlorine shock.
I’ve been following these steps for 3 weeks and still can not get my cloudy water to clear up. I even just installed a brand new sand filter 2 weeks ago. I went with a 22” filter since my pool is 22,000 gallons. Filter has been on 24/7. I’m at a loss.
I imagine you cleared this up by now. I had the same issue. What ended up working is partial drain 4"-6" of water and replenish with hose water. Brought the Calcium level down and got rid of the haze.
@@kopplinfamily7529yeah I haven't been able to get it to clear up in the deep end area this year all the chemicals are within the right levels except the calcium hardness which is a little low at 120 PPM also on well water with a 22,000 gallon pool. Was told that the calcium hardness being a little low shouldn't cause the cloudiness though only if it was high but this is the first year I've had issues not being able to clear it up hopefully you get it figured out nothing more frustrating than a non- Crystal pool with how much it cost to run the it this year and the cost of chemicals debated on even opening it at all LOL
Have some questions. Can a 20g chlorine weekly tab or multichlorine tab be split in two pieces, so that one half can be used in dispensers/floats in smaller spa pools? Does anyone know anything about it?
Ok so what do those of us that do not have a backwash or waste setting but have tons of dead algae that for some reason just won’t leave my pool? I love ur videos thank you for helping me
Is it a cartridge filter or a smaller Intex sand filter? You might want to get a hand-held pool wand vacuum to suck it out (but it doesn't connect to your pool)
@@SwimUniversityShocked several times with cal-hypo and then non-chlorine shock. My levels are: PH 8 FAC 3 TC 15 ALK 80 CH 125 Phos 50ppb I know CC is 12. I want to stray from cal-hypo because it raised my CYA and I had to partially drain and refill. Should I try liquid chlorine? How many gallons of chlorine do I need for my 20,000 gallon cartridge pool? My kids haven’t swam this summer yet.😢 Thanks!
@@enj0ythesiIence Calcium hypochlorite did not raise your CYA, that would be Dichlor or Trichlor Tablets or some form of Stabilized Shock (ie Clorox "Blue" bags). Your CC is way out of balance, max is around 0.5ppm. I'd worry about that first. Yes Liquid chlorine is the best choice as it only affects FC levels and increases salt slightly. Our calcium hypo shock is fine, however it will raise your Calcium levels with each use. But that shouldn't be a problem for you currently as your Calcium is low enough. Something is causing the high Chloramines (CC) to be very high, which is first problem to attack
My pool was beautiful and clear when we finished our swim. I tested the water with a test strip and everything was balanced and within proper range except chlorine…. The chlorine was at 0 and so I decided to put shock in the pool…. Immediately the pool got cloudy, woke the next morning and its still cloudy….. so what is the problem…. It was clean and beautiful when I added shock and immediately it turned cloudy…. Mildly cloudy HELP!!!
Shock kills the contaminants and it's very normal that it's cloudy afterwards! Clean and run your filter for 24/7. Or use flocculant or a clarifier to speed things up.
Another you need to test is phosphate levels, if it's to high not only is that candy for algae, it will also tie up your chlorine levels. If you don't get the dead algae out after a shock treatment, the dead algae can raise phosphate levels. It's a snowball if the phosphate levels get to high.
My water was very cloudy, my ph was good, added floc, according to directions. Vacuumed up the settled debris but water was still cloudy. After refilling the water, I didn’t have time to vacuum again that day. Should pool pump be left on recirculate or filter until the next day or the day after when I can get back to vacuum again?
The Pool Care Cheat Sheet (Free): swimu.com/cheatsheet
The Pool Care Handbook: swimu.com/book
The Pool Care Video Course: swimu.com/poolcourse
Good point about skimmer flaps (weir gates).
When taking on a new pool it's one of the first things I look at, making sure they are in place and working correctly.
If they are stuck down or missing, the vast majority of the water going into the skimmer is sub-surface level. Floating debris (dust, dirt, pollen, leaves) will go right past the skimmer, and sink eventually.
The weir blocks off most the water allowing only about the top half inch or so to get in. Surface tension draws nearby debris into the skimmer.
Properly working weir gates can make a huge difference in the pool's cleanliness.
A malfunctioning weir would cause a lot of issues!
My above ground pool was green but after several shocking several times , vacuuming and running the filter it is now blue and levels are good. The problem is it’s cloudy and the CYA is at 0 with a test strip but about 30 at the pool store. I had added CYA 3 days ago , liquid in the skimmer. They are saying leave it alone but it’s still super cloudy. I clean the filter 2x a day - but it’s pretty clean w the exception of some small particles from pine trees. Any advice. Chlorine on the strip is also slightly high but not at the store test. Help!!
So what if your pool is clean and it has chlorine in it but the top layer of the water has tiny debris? I’ve been trying to learn how to service my pool for a while now but I never really understood why the top layer never gets perfectly screen. I’m not sure if it’s the skimmer that just doesn’t have enough power to suck up the debris or what.
You might want to check out getting an automatic skimmer
did you ever get it fix and if so how?
My above the ground pool is cloudy after ph increase
Can i use the clarifier?
i've tried getting the pool cheat sheet but never get it via email. i'm signing up for the newsletter like it says, can someone explain what i'm doing wrong?
Check your spam folders. But otherwise you can email us at matt@swimuniversity.com and we'll make sure you get it
My pool was green like a pond. Used liquid Chlorbrite two different times. Killed algae, have stable levels of chlorine and all other levels. I have used Flocc two different times, exactly like directions. Waited 24-48 hours both times. Nothing has fallen and pool is still light blueish green cloudy. Any thoughts?
Ok, so you have tested the alkaline and it’s within the suggested 100-150 ppm? The pH is within 7.2-7.5? The chlorine is at 3 ppm?
When you added the floc did you change the circulation to recirculate? The filter should be bypassed cause otherwise, the floc is being filtered out as soon as you put it in.
And that would be why you are not seeing coagulation of particles and floc at the bottom of your pool.
Exactly this 👆
Can I use a robot to vacuum after I have used the flocculent
No, you have to manually vacuum on the waste setting
Hey! Some ppl say you should not use Flocculant with filterballs? Is that correct? They also says that about ClearPool (which I guess is what you call Clarifier). Do you know anything about that?
It's the same reason you wouldn't want to use floc with a cartridge filter: you need the floc to bypass the filter medium (on backwash). Any floc going through your filter medium, like a cartridge or filter balls, will stick to and ruin it. If you can bypass your filter (like a backwash or drain port), you should be fine!
My free chlorine and combined chlorine are both high. So I added non chlorine shock. But I feel like I should have added a cal hypo shock instead. Can I still add that or do I wait 24hrs?
You don't need to wait that long to add chemicals after adding non-chlorine shock. Test your chlorine levels after adding the non-chlorine shock. And if the combined chlorine hasn't come down, you can use chlorine shock.
Can I add floc the same day I use shock
Flocculant needs to sit for 8 hours before its vacuumed. So by the time you add shock, it'll be the next day!
Thank you for this wonderful video! It was very informative, and I appreciate your advice. 🎉
You're welcome!
Can flocculant be used with a DE filter? I was taught not to use it as it would clog the grids.
If you vacuum out the flocculant through the waste port using a backwash hose, it won't touch your filter grids.
Thank you 👍🏻👍🏻
You're welcome!
I’ve been following these steps for 3 weeks and still can not get my cloudy water to clear up. I even just installed a brand new sand filter 2 weeks ago. I went with a 22” filter since my pool is 22,000 gallons. Filter has been on 24/7. I’m at a loss.
I imagine you cleared this up by now. I had the same issue. What ended up working is partial drain 4"-6" of water and replenish with hose water. Brought the Calcium level down and got rid of the haze.
@@sixthroot I’m still fighting it, I’m thinking the same about calcium but I think it’s coming from my well water.
@@kopplinfamily7529yeah I haven't been able to get it to clear up in the deep end area this year all the chemicals are within the right levels except the calcium hardness which is a little low at 120 PPM also on well water with a 22,000 gallon pool. Was told that the calcium hardness being a little low shouldn't cause the cloudiness though only if it was high but this is the first year I've had issues not being able to clear it up hopefully you get it figured out nothing more frustrating than a non- Crystal pool with how much it cost to run the it this year and the cost of chemicals debated on even opening it at all LOL
Have some questions. Can a 20g chlorine weekly tab or multichlorine tab be split in two pieces, so that one half can be used in dispensers/floats in smaller spa pools? Does anyone know anything about it?
I do that all of the time...
Go for it! Just be careful handling it
Ok so what do those of us that do not have a backwash or waste setting but have tons of dead algae that for some reason just won’t leave my pool? I love ur videos thank you for helping me
Dealing with this as well
Is it a cartridge filter or a smaller Intex sand filter? You might want to get a hand-held pool wand vacuum to suck it out (but it doesn't connect to your pool)
I pull my filter cartridge out, disconnect the hose to the outlet and put a backwash hose on there.
What happens when you use floc and the water is still milky/cloudy?
What else did you do before adding floc? How are your other levels?
@@SwimUniversityShocked several times with cal-hypo and then non-chlorine shock.
My levels are:
PH 8
FAC 3
TC 15
ALK 80
CH 125
Phos 50ppb
I know CC is 12. I want to stray from cal-hypo because it raised my CYA and I had to partially drain and refill. Should I try liquid chlorine? How many gallons of chlorine do I need for my 20,000 gallon cartridge pool? My kids haven’t swam this summer yet.😢 Thanks!
@@enj0ythesiIence Calcium hypochlorite did not raise your CYA, that would be Dichlor or Trichlor Tablets or some form of Stabilized Shock (ie Clorox "Blue" bags). Your CC is way out of balance, max is around 0.5ppm. I'd worry about that first. Yes Liquid chlorine is the best choice as it only affects FC levels and increases salt slightly. Our calcium hypo shock is fine, however it will raise your Calcium levels with each use. But that shouldn't be a problem for you currently as your Calcium is low enough. Something is causing the high Chloramines (CC) to be very high, which is first problem to attack
How do you shock your pool? I think that's my problem!
I’ve add clarifier …. Still cloudy !
Same....it's so frustrating.
Great video 👏🏻
My video won’t play. Anybody know what’s wrong?
Did you get it to work?
Have you ever heard of the pool pump itself causing a cloudy pool? I have a new filter perfectly balanced pool. Tired everything. Still cloudy
Are you running it long enough? All of your water should pass through your system at least once a day.
@@SwimUniversity it runs 24/7.
@@reddogg3118damn you constantly run it? You must be rich haha. I run it 10 hours a day.
Thats the exact problem I have now. I've been running it for 24 hours and the pool place keep telling me the water is balanced. This is killing me!!
@thaglacierboy I used something called pool first aid. It cleared my pool right up in three days. Crystal clear now.
My pool was beautiful and clear when we finished our swim. I tested the water with a test strip and everything was balanced and within proper range except chlorine…. The chlorine was at 0 and so I decided to put shock in the pool…. Immediately the pool got cloudy, woke the next morning and its still cloudy….. so what is the problem…. It was clean and beautiful when I added shock and immediately it turned cloudy…. Mildly cloudy HELP!!!
Shock kills the contaminants and it's very normal that it's cloudy afterwards! Clean and run your filter for 24/7. Or use flocculant or a clarifier to speed things up.
Another you need to test is phosphate levels, if it's to high not only is that candy for algae, it will also tie up your chlorine levels. If you don't get the dead algae out after a shock treatment, the dead algae can raise phosphate levels. It's a snowball if the phosphate levels get to high.
Thanks
My water was very cloudy, my ph was good, added floc, according to directions. Vacuumed up the settled debris but water was still cloudy. After refilling the water, I didn’t have time to vacuum again that day. Should pool pump be left on recirculate or filter until the next day or the day after when I can get back to vacuum again?
Did you end up watching the first part of the video? Sometimes there's a bigger root issue. And vacuuming too quickly can kick up the flocculant.
I want the job for swimming pool
Return nozzle instructions
Nice
Thank you!
I just dump a couple gallons of bleach in my pool, it's clear very quickly . But I also make sure everything is right with my filter .
Good call checking the filter. And a couple gallons of bleach is essentially shocking your water!
👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
🥰