The FD Interior creaks squeaks and clacks so much. Recommendation. Put thin foam tape on every plastic trim piece edge. Takes a few hours but it’s worth it. Especially center console. Then get the Bubbletech center console support. Also to make sure the door cubby doesn’t break again cut a piece of plastic the same shape as where the screw sits in then countersink it and use as a washer. Those break because you open and close using that pocket and the only thing holding it down is a tiny screw so it widens the plastic hole and eventually snaps it completely.
RX7 is absolutely your best car! I’m so glad you’ll never sell it, it really is a work of art and I love the white paint job, the blue rims with the red seats! The carbon hood you said you were going to paint but now it has grown on me and it just sets it off just right!
The fact that this car runs the ways it does really shows the quality of the work ppre did on that engine especially coming from a rotary which don’t like to sit for long periods of time.
I great trick for jdm interior pieces that have broken clips is to glue neodenium magnets to the panel and to the body so the panel will stay in place strong but easily removable still
This build is the car that originally got me watching your channel. The combination of you and Mickey working on this was so good and I was hooked from there! So glad to see it back!
Tj I know you have others who help you out while you do the UA-cam stuff, but would you be able to give us a tour or show us your toolbox and tools. Always wanted to see what you got in your shop ever since you left Calvin’s garage. The og’s know. Been watching you since the brz and Calvin’s house so seeing you grow this much you must have quite the collection of tools and nice things. If it’s a privacy thing don’t worry about it. Thanks!
1 of my favourite cars of his which doesn't get much attention anymore so glad hes finally working on it but also, I definitely could fall asleep to just the raw sound of the Rotary, very therapeutic 😂😅
Oh Calvin is a Filipino! Hello Kababayan! Great to see fellow Filipinos engaged in US Car Community. 😀 Following you all the way from the Philippines 😀
TJ Hunt Awesome Video I'm so glad your FD RX-7 started up and I think still sounds just as good as it did before you stopped driving it and I'm glad you guys had a great time at the shop
Invest in a 3d scanner, and 3d printer so whenever you get rare plastic interior bits you can scan them and print them with high quality filament whenever you need to replace it in the future. could also fav and sell them for anyone that would want them as well.
She is a beauty. Oh my god. I don't know if you are readigh this Tj, I have the exact same build RX7 in GTA V online. Tribute to your car. Missed this car on the channel so much.
I think with how technology is now and 3D printing, we should be able to scan and make a lot of these interior or engine bay parts. I’m surprised no one has done it yet. He’s definitely right about rx7 parts. Getting harder and harder to find and stuff for the FC is getting scarce as I’m finding out.
That generation RX7 is so good-looking. Those blue wheels look killer. Even though my wife lost her vision last year, that joke was still funny 🙂. She laughed.......
I know you just fixed the RX7 interior. But I think you should have SOS redo the interior. Customize it. Bring it up to date like if the car just released in 2020. Don’t do MTV pimp my ride customization. Just a subtle interior SOS revamp. I think that would be pretty sick.
Tjhunt. My fd rx7 is older then yours. It's a 91 and all my stock door cards center Consol is all tight and fine. Never had to do them. And I had my fd rx7 build by smg racing half bridge port. Efr 9280 turbo ets Intercooler elite 1500 ecu. There is a huge list I'm not going to Wright but I am all running nittos on my car as well.
Use TJHUNT code to get 55% off your first month at Drift.co drft.info/4dX6XLM
bro its not a flavour lol
Hey TJ why don't you 3d print those plastic parts so just made it easy cause I know they can do it.
Tell me how I got a ad by you on a video by you 😅
Can't you just 3D print the ashtray cover?
Bro we need to see this car way more often man please tj😢
TJ you gotta 3D scan every piece of the interior and start selling 3D printing replacement parts. Keep the Rx7 community alive
beat comment coming from a miata man 😂
Great idea mann
So many rolling shells for sale. Interior parts are in demand big time
I hope tj sees this and does it
Didn’t Mazda announce a legacy program for the rx7? Did that ever happen?
The FD Interior creaks squeaks and clacks so much. Recommendation. Put thin foam tape on every plastic trim piece edge. Takes a few hours but it’s worth it. Especially center console. Then get the Bubbletech center console support. Also to make sure the door cubby doesn’t break again cut a piece of plastic the same shape as where the screw sits in then countersink it and use as a washer. Those break because you open and close using that pocket and the only thing holding it down is a tiny screw so it widens the plastic hole and eventually snaps it completely.
FD Owner? or just love the car?
RX7 is absolutely your best car! I’m so glad you’ll never sell it, it really is a work of art and I love the white paint job, the blue rims with the red seats! The carbon hood you said you were going to paint but now it has grown on me and it just sets it off just right!
Calv talking about having a greasy car while having the dirtiest car always is actually wild 😂
😂😂
it takes one to know one 😂
Love the R34 but something about the FD just hits ❤
Finally! Sabrina's favorite "POS" 😂
lmao
nanay answering "anak ano nangyare" ( son what happened ) is very filipino mom like 😅 everytime we call our moms they always think that we're dying 😂
Like everytime man😂
NASAN KA? SINO KASAMA MO?
@@mattpapa03 exactly 💯
I’m Mexican and my Filipino friends parents always answer my calls like that. Gotta love the Tito’s and Titas out there.
@@humberto_productions hell yeah man if you ever get close to a filipino parents they'll treat you as one of their own
The fact that this car runs the ways it does really shows the quality of the work ppre did on that engine especially coming from a rotary which don’t like to sit for long periods of time.
“Anak, anong nangyari?” A filipino mom for sure ❤️. Filipino TJ HUNT fan here!!
I great trick for jdm interior pieces that have broken clips is to glue neodenium magnets to the panel and to the body so the panel will stay in place strong but easily removable still
“In 100 degree weather pep? You got the mud butt”
I AM CRYING
😂😂
Ain’t no way bros going commando
Awesome video as always TJ and Crew.
This build is the car that originally got me watching your channel. The combination of you and Mickey working on this was so good and I was hooked from there! So glad to see it back!
this car taught me so much about rotary and about cars in general. i remember the build very clearly. one of my favorite times on this channel
Easily my favorite of his builds. So much character and pride went into that car. Would love to see it someday 🤘
the way nanay answer the phone, that's genuine filipino mom's love right there!
15:34 as a fellow Filipino. For me, This is the best part of your video Tej. Damn that was heart felt!.
Loved to see the throtl x huntqaurters wheel, i‘m still rocking mine in my 180sx 🥰
Tj I know you have others who help you out while you do the UA-cam stuff, but would you be able to give us a tour or show us your toolbox and tools. Always wanted to see what you got in your shop ever since you left Calvin’s garage. The og’s know. Been watching you since the brz and Calvin’s house so seeing you grow this much you must have quite the collection of tools and nice things. If it’s a privacy thing don’t worry about it. Thanks!
MY FAVORITE BUILD!! Edged the heck out of me at the end brother 😩 was waiting for a burnout or something😂banger video!!!
1 of my favourite cars of his which doesn't get much attention anymore so glad hes finally working on it but also, I definitely could fall asleep to just the raw sound of the Rotary, very therapeutic 😂😅
Oh Calvin is a Filipino! Hello Kababayan! Great to see fellow Filipinos engaged in US Car Community. 😀 Following you all the way from the Philippines 😀
I like this closing clip of the rx7. Please do more of this with all the videos.
Bro! It’s been 7 years! That’s wild! I remember the highlight yellow 350z and red Miley
You can use the same adhesive you used to attach parking sensors to attach the plastic standoffs. Glob it on around each and it holds great.
The last 2:30 of this video, pure heaven ❤ thank you TJ
Every walk around *at the end* should be done like that. Loved it
TJ Hunt Awesome Video I'm so glad your FD RX-7 started up and I think still sounds just as good as it did before you stopped driving it and I'm glad you guys had a great time at the shop
Of all your cars this and your other veilside is my favorite. The fd rx7 is such a beautiful car. We need more videos including both of the fds.
God this bring back memories my best friend and i use to watch you build the rx7 sadly my friend died when we was 21 really brings back memories
Still one of the cleanest rx7 gawdd it sounds so amazing been a while since i ive seen one of your videos was definitely cool watching this vid
That's my favorite RX7 model. It looks awesome! Great work. God bless
Invest in a 3d scanner, and 3d printer so whenever you get rare plastic interior bits you can scan them and print them with high quality filament whenever you need to replace it in the future.
could also fav and sell them for anyone that would want them as well.
I don’t understand how they haven’t done this at this stage in the game.
@@Vgk36 no idea, but it’s a game changer for sure
Rx7 platform is a cottage industry waiting to happen for lots of parts.
I love this car! Of all the cars TJ has built, this my favourite.
how are you barely hitting 300k veiws. your channel is literally the best one as far as content on ty right now.
She is a beauty. Oh my god. I don't know if you are readigh this Tj, I have the exact same build RX7 in GTA V online. Tribute to your car. Missed this car on the channel so much.
One of my favorite cars that you own! PLS bring back the skate decks with this one!
Striaght up havent clicked on a TJ video in a couple years. Still subscribed for some reason. But i love this car lmao, had to check this out
I am so right! Calvin is a Filipino and I'm a Filipino fan all the way from the Philippines!
Love the RX7 and GTR, and well.....all the builds. But we need more Harley content. Haven't seen it in a long time!
Man I love the white Rx7 you need to drive it more TJ it’s such a epic car
Close your eyes and just remanence in JDM symphony....21:19
18:19 Wasn't expecting that from Dylan 🤣🤣
Remember when that fd was getting built and just got a notification after years so looks like I’m back watching again
Pop up lights on top
I know you guys use 2 part epoxy but for any plastics.. i use Shoe Glue. Clear or Black depending on your preference. I reckon give it a try :)
Def. 3d scan and print those out in ABS or ASA or CF, or whatever you're using for the body parts..... then you'll have your pieces....✌✌
Holy crap I remember watching him when he got that FD! Its been that long 😭
Wow, this was epic! Do more like this!
I think with how technology is now and 3D printing, we should be able to scan and make a lot of these interior or engine bay parts. I’m surprised no one has done it yet. He’s definitely right about rx7 parts. Getting harder and harder to find and stuff for the FC is getting scarce as I’m finding out.
We deserve a nice driving vlog with this car TJ pleaseeeee
Love this car!!!...Would love to see the hood white, roof white, and popups back....but thats just me.
Probably one of my favourite cars you have loveeeeeee the Rx7🔥
Can we just acknowledge the WHOLE ENTIRE intro was full of whole entire comments lol
Sooo much “whole entire” in every video 😂
My favorite car you own, this is how I found your channel!
I don’t think making a body kit for a mustang is a good idea. Usually mustang owners are too busy crashing their cars to care about body kits.
Hilarious point but true
More crashes mean they have to buy more kits
@@Zoomie4L this guy gets it
@@Zoomie4Linfinite money glitch 😮💨
Yeah don’t ever start a business
Saved my Saturday! TJ and crew are killing it! ~WilPaul
By far my favorite car of yours
OMFG it is so nice to see this car back and running, now it needs a nice long drive
Cant wait to get my FD like this. Best part is mine will also be driven in SD.
My favorite build by far I love the rx7 series
@9:42 Twon you savage 😂❤🎉🎉🎉
Calvin free balling his mac I feel it😂
Bubbletech makes several reproduction interior plastics that are discontinued.
I love hearing a recap of the center vent mishap whenever this car comes out 🤣
I personally think that the rx7 is the perfect 2000s build 🔥🔥
Mickey did a beautiful job on that car 👌🏽
Great ASMR Sounds 21:20
11:30 God damn Calvin and ordering the wrong parts 😂😂
My boy NEEDS those oem bits - this thing needs to be mint
Yellow OZone box works best for smells and gets rid of most mold
If the previous owner was a smoker, put that yellow OZone box in there for 20 hours and you would never know. No sponsor money for me. Just saying
Music to my fucking ears TJ. Hands down your best build and car. We need driving vlogs with it.
There is one piece missing… Nightrider light in that front bumper cutout. 😎
TJ we need a body kit for the 350z! Even if its a stockbody kit instead of a wide body I would be very happy
i remember when he dropped the video of him going to look at the fd man i been watching for a long time
That outro was just….therapy. ❤
Love seeing you on an ad before your video
That generation RX7 is so good-looking. Those blue wheels look killer. Even though my wife lost her vision last year, that joke was still funny 🙂. She laughed.......
The FD is so bad ass. Thanks!
Dayyum bruh😎. You gotta ship that for me RX-7 white. Please dont turn it up to Rx-7 fast furious, ive seen it too much
"Oh no what's wrong" would make a good sticker.
Twon is a legend for living that clip in 😂😂😂
Best car in the fleet!!
TJ can you'll tell the Mrs. We are praying for her. Also love the content❤
Still my favorite build you've done
That’s funny, at the start of this video I got an ad from TJ about the lighting in his shop!
OGs would recommend when TJ first bought the rx7 before the refresh
Going commando is crazy...My thunder thighs would be rubbed raw 😂
watching the first 5 mind with a few beers in you.... hilarious!!!!
you should look into getting custom door cards made
Loved the ending.
Next round in the front some 265 but dang spicy
I know you just fixed the RX7 interior. But I think you should have SOS redo the interior. Customize it. Bring it up to date like if the car just released in 2020. Don’t do MTV pimp my ride customization. Just a subtle interior SOS revamp. I think that would be pretty sick.
Tjhunt. My fd rx7 is older then yours. It's a 91 and all my stock door cards center Consol is all tight and fine. Never had to do them. And I had my fd rx7 build by smg racing half bridge port. Efr 9280 turbo ets Intercooler elite 1500 ecu. There is a huge list I'm not going to Wright but I am all running nittos on my car as well.
Tj hunt back to making good videos😂❤
P.s. i cant wait to go over a speed bump and watch my air fresher fall
Don’t change it TJ she’s a master piece. Half a million dollar car at auction one day.
Good seeing Calvin in the videos
Goated collab would be Tj and rob dahm to do some work on the rx-7’s
Its still one of the best cars you've done.