Crankbrothers Pedal Removal Tutorial

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 22

  • @MelissaBackwoods
    @MelissaBackwoods 2 роки тому +2

    He makes it look so easy 😆 I am a female and in order to do this I had to put my bike on the ground, hold the break, and stand on the Allen wrench, it finally budged!

    • @crankbrothers
      @crankbrothers  2 роки тому

      They can certainly be on there very tight! But what you described for tight pedals is the perfect approach 😅

  • @bertranddvffrancisco3153
    @bertranddvffrancisco3153 3 роки тому +3

    what if its really too tight....cant remove my crankbrothers flat pedals coz my friend installs it too tight.

  • @ratandjmt
    @ratandjmt 2 роки тому

    Just what I needed. I swear everything time I take my pedals off I have to look it up.

  • @OneWheelTwoSkis
    @OneWheelTwoSkis 4 роки тому +20

    Taking these pedals off is a nightmare. Sorry Crank Bros.

    • @MXROutlaw
      @MXROutlaw 2 роки тому +2

      Struggling to get my left side off. I'm legit afraid I'm gonna bend or snap my crank

  • @SinnerSince1962
    @SinnerSince1962 2 роки тому +4

    Why they didn’t put a simple wrench flat on them is a huge mystery, and an even bigger mistake. I bought these, but may remove them and go back to my 540’s

  • @KoAm-1974
    @KoAm-1974 3 роки тому +1

    Easy and clear enough. Thanks, buddy.

  • @narakdk
    @narakdk 3 місяці тому

    are my pdeals broken when the tool just goes around without resistance? I have the right size. How to get them off now?

  • @we1rd92
    @we1rd92 2 роки тому +3

    So i bought a used bike with Crankbrothers Candy pedals. Left side came off after using a metal pipe as leverage. Right side so far i broke 1 allen wrench and twisted 2. Already sprayed this shit with WD40 over night. Seems like i need to buy a new crank because that shit is fused together.

    • @MXROutlaw
      @MXROutlaw 2 роки тому

      Same here

    • @we1rd92
      @we1rd92 2 роки тому +1

      @@MXROutlaw i did manage to change my pedals. I had to heat up the crank with a heat gun and then used a pipe wrench on the other side of the allen screw

    • @wilfriedmestdagh1676
      @wilfriedmestdagh1676 8 місяців тому +1

      Same ! No problem with the right one but rhe left is a nightmare, completely blocked.
      I am replacing Candy 1 by Candy 7.
      Candy 1 is in hex 6 meanwhile Candy 7 is a 8 mm hex, I didn't know that 😅
      I'm afraid I'll break everything !

    • @wilfriedmestdagh1676
      @wilfriedmestdagh1676 8 місяців тому

      I finally succeeded by heating longer, it came all at once.
      On the new pedals, I put threadlocker (blue stuff).
      They are nice.

  • @tsegorahal
    @tsegorahal 3 роки тому +3

    Would not work if pedals were used any significant time. Why you are not adding wrench flat? It will allow usage of tools with bigger arm

  • @davidmain8696
    @davidmain8696 2 роки тому

    Just what I needdd. And it was quick.

  • @blahaj___
    @blahaj___ Рік тому

    sucks doing this with a normal hex wrench

  • @blahaj___
    @blahaj___ Рік тому

    yeah mine dont come off that easy

  • @jbean530
    @jbean530 2 роки тому

    Good thing I gave a breaker bar. Haha.

  • @andrzejpieta2827
    @andrzejpieta2827 Місяць тому

    It not goes so easy