Thanks a lot of this video. Just a couple of tips for others trying to follow it to swap out their key covers: - make sure the rubber button cover gets removed along with the plastic piece below it. I initially removed the rubber button cover only and there was a little plastic piece that stayed behind which covered the chip inside the key and had some holes in it (where the buttons go through to make contact with the chip and perform their corresponding job). I had a heck of a time trying to re-assemble the key before I noticed in the video that the plastic piece in the middle was also removed. I took some photos of that center piece with the intention of adding it in the comment but I'm not sure I can unfortunately. You will know what I'm talking about if you run into this issue. - for me it was easier to put the center cover on first and then clip in the side covers. I first put the side covers on and it was hard to squeeze the center piece between the sides (probably due to slight tolerance in the manufacturing making the plastic pieces too tight of a fit, but its better than loose fit).
Thank you so much for this video. The installation guide was NO HELP! Very grateful for your step by step guide. SO MUCH EASIER. I thought I was going to break something with the dump install guide. ❤❤❤
You all are lucky if it goes this smoothly. The previous owner had bunch of superglue under the case, which took forever to open, then scrape everything so the new one could fit. Great video regardless!
You can do the entire process without removing the screw, the top button cover or emergency key. You can literally just take your fingernail and separate the sides from the main body. Then click you new piece in. The instructions are usually in the photos on the Amazon fob you purchase.
I was able to pop off the sides and you don’t need to take off the philips screw and key ring and don’t need to take off the chrome part too? The sides just pop off with a small flat head...
Rob quick question. bought the full shell. Have a sealed unit. I cut it out and removed the PBC and transferred to the new shell. After the assembly, remote lock and unlock works fine only to find out when i put it in the ignition, it doesnt turn on. seems like immobilizer isnt working. second oem key still works fine. what can it be? this remote doesnt have transponder pill to remove..? can it be a programming immobilizer?
I have a 2023. The top chrome part didn't come off for me. Seems they glue down the front portion now? Almost broke it trying to get it off. So just replaced the side blades and left the chrome in place.
Hi, im looking for the same kit as the other kits i found on Amazon and Ebay doesnt include the chrome part... i checked the link you added, 1st they dont have the lava orange 2nd they dont ship to DubaI, is there any other alternate...?
so the cover for my buttons for the a 2017 718...is rubber and I cannot get it to go back in.....now I have a rubber band until I can get it to the dealership......
I mean, you spring for a masterpiece of German engineering and you get a cover set from wuhan? Please tell me they at least paint matched guards red or an OEM paint code. But not bad for $8-9.😂
Usually the aftermarket pieces don't match an OEM color, maybe except solid black. 😅 I have a PTS 991 and gave my OEM covers to a car painter to paint it dark olive green. Paid 40 Euros for 4(!) pieces. OEM is much more expensive and PTS isn't available.
Get your cover here - ebay.us/hTuhsp
This was a great video. No fluff, no droning on and on. It was what tutorial videos should be.
Thank you! You've got better things to do than listen to me ramble on about nothing important
Thanks. It was easy to follow your instructions😊
Used this tutorial about a year ago now. Worked like a charm! Didn't yap away like most UA-camrs do. Just got straight into it, love your work mate!
Thank you!!
How all instruction videos should look....superbly clear.
👍
Thank you!!! I just purchased a Cayman and wanted to change the boring black cover and replace the coin battery…..YOU PULLED ME THROUGH!!!
You bet! Glad I could help make your day a little bit easier!
Thanks a lot of this video. Just a couple of tips for others trying to follow it to swap out their key covers:
- make sure the rubber button cover gets removed along with the plastic piece below it. I initially removed the rubber button cover only and there was a little plastic piece that stayed behind which covered the chip inside the key and had some holes in it (where the buttons go through to make contact with the chip and perform their corresponding job). I had a heck of a time trying to re-assemble the key before I noticed in the video that the plastic piece in the middle was also removed. I took some photos of that center piece with the intention of adding it in the comment but I'm not sure I can unfortunately. You will know what I'm talking about if you run into this issue.
- for me it was easier to put the center cover on first and then clip in the side covers. I first put the side covers on and it was hard to squeeze the center piece between the sides (probably due to slight tolerance in the manufacturing making the plastic pieces too tight of a fit, but its better than loose fit).
very helpful tip wouldn't done it without it. thanks
Really helpful thanks for that tip I was pulling my hair out 😂
Thanks a lot, we had the exactly same issue and this fixed it for us.
Took me hours to figure out the rubber part and plastic piece underneath it, thanks a lot!
You’re such a life saver. I spent an hour trying to shove the rubber piece back in. Horrible experience
Just replaced mine: white color. Took 1 less than a minute with this video instructions. Thank you!
Nice!
Thanks! Normally I skip the fluff. This time I had to pause and replay parts with is far more preferable than fluff. Excellent!
Glad the video was helpful!
Thank you so much for this video. The installation guide was NO HELP! Very grateful for your step by step guide. SO MUCH EASIER. I thought I was going to break something with the dump install guide. ❤❤❤
I'm glad I could help!
Very helpful video. I already had a package of 12 of these batteries from Costco. I replaced the batteries in 2 key fob's in just a few minutes.
Perfect! Glad the video could help you replace the batteries.
Thank you. Best $10 I ever spent on car parts haha! You don't need to remove the screw and key ring holder
You all are lucky if it goes this smoothly. The previous owner had bunch of superglue under the case, which took forever to open, then scrape everything so the new one could fit. Great video regardless!
WOW!!! clear instructions, easy to follow!!! great video.
Glad it was helpful!
You can do the entire process without removing the screw, the top button cover or emergency key. You can literally just take your fingernail and separate the sides from the main body. Then click you new piece in. The instructions are usually in the photos on the Amazon fob you purchase.
Thanks! - After watching your video this showed me how to do it with no trouble! 👍
Glad it helped!
Thank you for this video. I would never have been able to figure it out w/o breaking something!
You're welcome! Just take your time and you'll do great!
WOWWWWW! The same key and same Color I choose :-) the Video couldn’t be more appropriate!!! Thanks.:-)
You’re welcome 😊
Thanks. Got my fob all set!!!
No problem! Glad I could help
Your do perfect videos please make more demonstration about upgrading tail lights and from lights for Porche cayenne 2011-2013
Worked perfectly with your help! Thank you!
You're welcome!
I was able to pop off the sides and you don’t need to take off the philips screw and key ring and don’t need to take off the chrome part too? The sides just pop off with a small flat head...
Perfect video...quick and efficient !
Glad it was helpful!
Thanks for posting this. Worked perfect! 👍
Glad it helped!
Thanks mate, followed thru step by step..😊
Nice! Glad the video was helpful
Damn! I broke the metal part un plugging It. The non original one is way too delicate.
great video...answers all my quesitons...
Glad I could help!
Rob quick question. bought the full shell. Have a sealed unit. I cut it out and removed the PBC and transferred to the new shell. After the assembly, remote lock and unlock works fine only to find out when i put it in the ignition, it doesnt turn on. seems like immobilizer isnt working. second oem key still works fine. what can it be? this remote doesnt have transponder pill to remove..? can it be a programming immobilizer?
I need the hook thing at the top. A friend of mine broke it off!
Worked perfectly - thanks!!!
Great to hear!
Thank you! Works perfectly.
Glad it helped
Thanks! was tryign to force the chrome piece in, didn't know the buttons come out!
No problem 👍
Perfect video thanks. I had no clue what to do
👍
I have a 2023. The top chrome part didn't come off for me. Seems they glue down the front portion now? Almost broke it trying to get it off. So just replaced the side blades and left the chrome in place.
That fob is a tad bit different. Check this one out - ua-cam.com/video/n5lDflUelWk/v-deo.html
Done! Much appreciated.
Glad it was helpful!
Hey will the new cover interfere with inserting the key in the ignition…in other words will the car start with the new plastic?
The new plastic will not impede you starting the car.
What are this panic button in your key ? Never saw it before.
Thank you. Very helpful 👍
Glad it was helpful!
Super helpful!!!!!
Thank you!
Glad it was helpful!
Great tutorial 👍🏻
Thank you! Cheers!
Hi, im looking for the same kit as the other kits i found on Amazon and Ebay doesnt include the chrome part...
i checked the link you added, 1st they dont have the lava orange 2nd they dont ship to DubaI, is there any other alternate...?
Thanks for video. It helped. 👍
I didn’t need to remove the screw though.
so the cover for my buttons for the a 2017 718...is rubber and I cannot get it to go back in.....now I have a rubber band until I can get it to the dealership......
Awesome thanks!!
Anytime
I can't get the rubbers back on 😭
Will this work for a 2022 Porsche 718 Boxster GTS, or is it only for the Macon?
If your fob is this shape, it will work.
Great video as always 😁
Thanks!
Thanks for your help
No problem
nice one. this was perfect.
Thank you! Cheers!
Interesting. I ordered a replacement shell from Suncoast Porsche and I did not get a chrome piece. I don’t know if that’s normal included.
The old piece can be reused. I got this replacement shell off eBay
@@KeyFobRob Oh, I know. I replaced the sides without even taking the metal part off. But it's interesting.
Thank you for the video as the instructions from the seller at Amazon was crap.
You're welcome! It's frustrating when instructions are unclear.
Perfect. Thanks
You're welcome!
Thank you this really me.
Glad it was helpful!
Very helpful! Thx
You're welcome!
Great! thanks for sharing...
Thanks for watching!
Appreciate it 😊
You're welcome!
perfect video!!
Glad you liked it
Nice. The ebay link is dead tho
Updated! Thanks for the heads up - ebay.us/hTuhsp
@@KeyFobRob Awesome
Excellent thanks and 1 take
Thank you too!
Good vid.👍
Thank you!
Thanks a lot👍
You are welcome
i cant pop in the runner part at the end
Very helpful since the cover does not come with instructions. Thanks
You're welcome!
Anyone tried to adapt a 997.1 key fob into the newer keys?
thx!!
You're welcome!
👍
Glad it helped
Hello my fellow rich community, I am poor I am here just to watch 😔 I cannot afford a Porsche
Thanks for stopping in :) I've got a lot of other exotic key fob videos as well. Feel free to check those out
@@KeyFobRob I do own a lighter 🔥 the shape of a Porsche key 😭🤣
@@MikeWazowski.Senior lol there you go!!
Your trunk is open
Ha! Yes indeed
I mean, you spring for a masterpiece of German engineering and you get a cover set from wuhan? Please tell me they at least paint matched guards red or an OEM paint code. But not bad for $8-9.😂
Usually the aftermarket pieces don't match an OEM color, maybe except solid black. 😅
I have a PTS 991 and gave my OEM covers to a car painter to paint it dark olive green. Paid 40 Euros for 4(!) pieces. OEM is much more expensive and PTS isn't available.
8/9 dollars? I paid 118 euros on the official Porsche website 😡
18€ on Amazon!
Porsche OEM is way better than the aftermarket items. Yes, expensive, but colors are OEM and they fit perfectly to the key. Aftermarket is crap.
Sa
ءمرمب
This is way too much work to replace a fucking key fob
Thank u so much man 🔥🫡 worked like a charm
No problem 👍
Thank you. Very helpful 👍😀
Glad it was helpful!
Very helpful, thank you!
Glad it was helpful!
Thank you!!
You're welcome!