How did I know your "OEM+" build would end up turning into more of an "OEM++" build lol. The SEI Tundra looks cleeean! I can't wait to see where you take her!
11:04 How much does a full body wrap typically cost? Can Lucid put in a custom design in a wrap? For example, I've seen wraps with a topo map of the US that looked very cool
With the rack, how much has interference has it caused with your satellite radio? I know with gear it will be blocked, but without gear do you still get reception? I want to still use the satellite radio is why I ask.
Back of the envelope math, your payload is down to about a half ton in this configuration. Not bad. I really like the bed cover/rack/tent setup. I’m thinking about something similar on my Ford. Love how your bumpers turned out BTW. Enjoy it in good health!
I think this is not an "OEM+". but more of a OEM+PRO... which could soon become a, OEM+PRO-MAX 😄Keep it up SIr, your build is an inspiration for my Tundra!
Great build! has given me inspiration to build out my new tundra. Do have a question looking at doing same lift but just wondering if you installed the 1/2 spacer that come in the kit on the front on top of the shock. And if you had to do it again would you have just went ahead and ordered the dobinson rear spring at the beginning?
Great looking truck and just a thought have you looked into the decked drawers and large drawer for storing stuff in the bed I think it would be really handy.
Is hangover on an XL really that bad ? I feel like in a weird way that the overhang might be nice when you drop the tailgate down and you would still have cover over the tailgate.
@@TalonSei awesome thanks for the reply. I’m waiting for my c4 sliders to come in for my 4Runner. Ima try to go for that oem look, really like that style.
Did the C4 front require delete of the front air dam? Not sure if that trim has the active or not. Heard it's tough to find a solution to clear the check engine code.
Also curious if you have a site or something with a full list of parts you keep updated? I’m new to modding and just picked up a tundra, so I’m looking for all the suggestions I can. Never overlanded or off roaded before so I’m learning and never even heard of most of these brands yet
Question for the Tundra owners here.. After installing a offroad front bumper, was there a sag to the front end from the added weight? If so, what are recommendations that brought the front end back up?
I don't know how much rain you get in your area but have you thought about thowing the Midnight Forest Rain Basin on the roof rack? Very cleverly designed product. Good thing to have in general but the rain collection is what sold me on it.
I know FSR is a sponsor, it also seems like you keeping everything local to the Denver area, might like looking into 4x4 Colorado as another RTT in the future.
@@HarryKuloh you ever heard of starlink? I’m sure it won’t work in all remote areas but some at least. And a single, in the moment overland livestream would go crazy for content IMO
Man that little V6 is going to be working hard with those turbos watch overheating if anything happens to this engine please be straightforward with us
Yeah we did. Sorry I breezed over that part because I was helping with the install and couldn’t film. Air dam delete and then plugged a module in its place for the computer.
Great build. I’m pretty sure you mentioned this already but did you upgrade the SR5 grill on your truck? Did the dealer upgrade it for you or is it aftermarket?
Where is your 37’ spare tire? I don’t think it fit underneath. You better have spare tire or you be in middle of nowhere just like you got stuck in snow. Glad you added winch cuz you’ll eventually need it.
NO WAY!!!! WERE YOU AT A KING SOOPERS ON QUINCY AND BUCKLEY ROAD?! IF YOU WERE I WENT PAST YOUR TRUCK!!!!! IT HAS AN ALL YOU CAN EAT SUSHI PLACE AND A COLD STONE NEXT TO IT AND NOODLES AND COMPANY RESTAURANTS
Since it's a stubby bumper. The sides extra clearance side wing bumper would be better. It will still maintain better OEM looks than the full bumper. In my humble opinion. No offense. Just sharing, mate.
How much did Toyota pay this guy . Over priced inferior 6 Cylinder with major problems . Forget to replace the valance replace that 6 Cylinder that will be nothing but a financial nightmare.
How did I know your "OEM+" build would end up turning into more of an "OEM++" build lol. The SEI Tundra looks cleeean! I can't wait to see where you take her!
OEM++ 🤣 I like that
Thank you for wanting more rack options on the diamond back cover. I always thought it was lacking in options. Great build
The Tundy looks AWESOME! The custom work by Sherpa is 🔥🔥🔥
amazing build, I have bean running a tundra for 10 years and I love it. great job Talon
OEM+ build went super saiyan! 🔥 build!! Looking forward to seeing the adventures.
I can't wait to buy my double cab at the end of the year! Thanks for sharing
Just got my 2024 TRD 4wd and I’m liking what you did here.
Sick build!!! Seriously thinking about trading my Gladiator for this and glad I came across your video!
Love what you did to the Tundra 🔥🔥🔥🔥🔥
Great BUILD Video as always Mr. Sei.. That is one CLEAN BEAST!!! 🎉Congrats... We're Looking forward on your future Videos... 😁
Man I hate being poor.
A wrap alone is like 9k lol
Bro, 😢 don't mention it
Man me too 😭
Wow !!! That tundra looks amazing man much nicer than the Tacoma .
That truck is looking RAD.
Loving the build!
Love the new truck😮💨
Love what you did with the truck. Look great! I'm a little jealous...
Beauriful Truck. You did a great job.
11:04 How much does a full body wrap typically cost? Can Lucid put in a custom design in a wrap? For example, I've seen wraps with a topo map of the US that looked very cool
The cost will depend on vehicle and material. If you are interested in a wrap design, reach out to lucid ✌🏼
@@TalonSei Thanks and Awesome Tundra man! Looking forward to hearing/viewing your Alaska adventure vids.
Thank you for the double cab rack R&D
It’s so good 🤌🏼🤌🏼
With the rack, how much has interference has it caused with your satellite radio? I know with gear it will be blocked, but without gear do you still get reception? I want to still use the satellite radio is why I ask.
Waiting for kimbo on this new tundra
Game changer
Very functional and thought out - great job man!
Such a beautiful build man. Now I want to trade my white taco for a white tundy….. thanks for starting my Toyota addiction
Back of the envelope math, your payload is down to about a half ton in this configuration. Not bad.
I really like the bed cover/rack/tent setup. I’m thinking about something similar on my Ford. Love how your bumpers turned out BTW. Enjoy it in good health!
Damn, looks like a tank! Nice. Now you just need to mount a couple machine guns on the sides and your set!
Is the diamondback able to be opened with that rack? Obviously with the tent removed.
Yup. The center portions of the rack are removable so with the tent off you can still pop the cover
love the truck!
I think this is not an "OEM+". but more of a
OEM+PRO... which could soon become a,
OEM+PRO-MAX 😄Keep it up SIr, your build is an inspiration for my Tundra!
Super clean, bruh! Love it. What's the video you referenced for your Wescott Designs TRD lift kit install?
ua-cam.com/video/xxi-tsScH3s/v-deo.html
@@TalonSei Thanks, man!
Did you have to change up the rear sway bar links with the dobinsons?
Just a track bar correction bracket
Great build! has given me inspiration to build out my new tundra. Do have a question looking at doing same lift but just wondering if you installed the 1/2 spacer that come in the kit on the front on top of the shock. And if you had to do it again would you have just went ahead and ordered the dobinson rear spring at the beginning?
The Tundra really turned out great. Hopefully, I’ll see it at Overland Expo Mountain West this year.
It should be there! Just not sure what booth yet.
I love this build ❤❤
Great looking truck and just a thought have you looked into the decked drawers and large drawer for storing stuff in the bed I think it would be really handy.
Decked systems are too heavy and take up too much bed space for my application.
The Tundra looks sick! My wife, and I will see you in Flagstaff. Congrats on your engagement BTW.
Thanks Keith, cya down there
Really cool truck
Thanks!
Looking sick. Yup !
Is hangover on an XL really that bad ? I feel like in a weird way that the overhang might be nice when you drop the tailgate down and you would still have cover over the tailgate.
Got to tip you Talon the white is clean
Did you use the Westcott rear spacer in addition to the Dobinson springs or just the springs? Awesome truck
No. Removed the spacer and I am just running the coil springs
What kind of tires are those? They look great! And they must be great for off-roading.
Firestone destination mt2s
Are you going to put any rock sliders on by c4 or did you purposely skip those?
Waiting to confirm fitment of C4s tundra sliders on a double cab.
@@TalonSei awesome thanks for the reply. I’m waiting for my c4 sliders to come in for my 4Runner. Ima try to go for that oem look, really like that style.
Did the C4 front require delete of the front air dam? Not sure if that trim has the active or not. Heard it's tough to find a solution to clear the check engine code.
Yea we deleted it and did a small plug in module to take the big bulky motors place and keep it from throwing codes
@@TalonSei Thanks for getting back so quick. Best of luck on your trip.
Also curious if you have a site or something with a full list of parts you keep updated? I’m new to modding and just picked up a tundra, so I’m looking for all the suggestions I can. Never overlanded or off roaded before so I’m learning and never even heard of most of these brands yet
My website is in the description
What’s a rough price range on a wrap plus ceramic coating like that?
Get some C1R's incorporated for your 3rd brake light!
Question for the Tundra owners here..
After installing a offroad front bumper, was there a sag to the front end from the added weight?
If so, what are recommendations that brought the front end back up?
No sag with this setup but I’m sure a heavy full size bumper might do that. Best fix would be suspension.
@@TalonSei Thanks for the response. I want to add a similar bumper/winch combo to my truck.
If you go this same exact route you can save some cash with code “talonsei” at www.c4fabrication.com 🤘🏼
Thank you!
The build is amazing. Do you know when Sherpa will be releasing that bed rack.
Pretty sick except you should add another rack on the hood
I don't know how much rain you get in your area but have you thought about thowing the Midnight Forest Rain Basin on the roof rack? Very cleverly designed product. Good thing to have in general but the rain collection is what sold me on it.
which model diode dynamics lights are you running in the c4 lo pro bumper?
SS2 pros!
Which Garmin PowerSwitch mounting kit did you go with?
We made a super simple custom mount that attaches to the battery tie down.
Beautiful truck Talon.
Soon it gonna turn into a monster 😅
I know FSR is a sponsor, it also seems like you keeping everything local to the Denver area, might like looking into 4x4 Colorado as another RTT in the future.
Well this is going to be an expensive channel. Subscribed....
Someday!
I would be so down for a little live stream when you're out on some trails would be heattt
Livestream in an area with no reception?
@@HarryKuloh you ever heard of starlink? I’m sure it won’t work in all remote areas but some at least. And a single, in the moment overland livestream would go crazy for content IMO
6:27 So glad you didn't say, "5-6' tall and laugh." I would then need therapy. 😂😂😂😂😂
Man that little V6 is going to be working hard with those turbos watch overheating if anything happens to this engine please be straightforward with us
Hey man love the build, if your looking for certain criticism If I were you I would flip the shovel the other way.. for “Aerodynamics”
Did you remove the front active air dam to install front bumper?
Yeah we did. Sorry I breezed over that part because I was helping with the install and couldn’t film. Air dam delete and then plugged a module in its place for the computer.
@@TalonSeithanks for the info. Looking to delete off our truck.
Looks great, if they can just fix the horrible turning radius problem on the Tundra, id be great. The old and new Tacoma is definitely more nimble.
Great build. I’m pretty sure you mentioned this already but did you upgrade the SR5 grill on your truck? Did the dealer upgrade it for you or is it aftermarket?
ua-cam.com/video/xxi-tsScH3s/v-deo.html
Thanks
How are your MPGs with the bigger tires?
14-15 but not 100% confirmed. I need to check manually.
@@TalonSei that’s not bad actually. Currently pushing 16.5 with the stocks. 24 Limited I-force max.
Parts list breakdown and links please?
On my website
This thing is a BEAST. Mpg probably 5 MPG. Dam
14-15ish but not 100% confirmed yet
Only lost 5 mpg. Not bad considering...
How much does the tundra cost after all the modes
Dope build man. I'm running some factor gear, I'm gonna have the check out agency 6
Highly recommend 👌🏼
what MPG you getting on this?
BAD. ASS.
Gatekeeping the tire setup
You’re gatekeeping yourself by not watching the full series 🤣 ua-cam.com/video/xxi-tsScH3s/v-deo.htmlsi=HWcx7lkit-0by3e6
And every detail of the build so far listed on my website too… seiproductions.com
What horsepower do you have? I've heard with 35s it can be hard on the power train and trans.
Curious about gas mileage
мне очень нравится твой новый автомобиль ) бомба просто!
Would love a cost total. I know you’re getting discounts or free kits but for someone looking for mod ideas getting price ranges would be apprt
looks great! But your not going through any carwash in that thing which would suck!
What car guy is going through any auto washes? 😆
Hot take, HD rigs are the coolest/most unique rigs
Sweet
Beefy 💪🏼
I'm just saying we need Sei camo Tacoma/Tundra tailgate inserts!
That would be rad. I’ll see what I can do.
@@TalonSei Fingers crossed!
Where is your 37’ spare tire? I don’t think it fit underneath. You better have spare tire or you be in middle of nowhere just like you got stuck in snow. Glad you added winch cuz you’ll eventually need it.
Fits under the diamondback just fine
@@TalonSei that definitely take up your room in bed. Perhaps add swing out on your c4 bumper 👍
6.5ft bed. It will be Gucci 👌🏼
NO WAY!!!!
WERE YOU AT A KING SOOPERS ON QUINCY AND BUCKLEY ROAD?!
IF YOU WERE I WENT PAST YOUR TRUCK!!!!!
IT HAS AN ALL YOU CAN EAT SUSHI PLACE AND A COLD STONE NEXT TO IT AND NOODLES AND COMPANY RESTAURANTS
Yeah we had sushi last night lol
I SAW THIS TRUCK AND THOUGHT YOU OFFERED BADGES.
BUT MAN THIS TRUCK LOOKS AMAZING IN PERSON!!!!
@@TalonSei i was there for sushi too! so crazy. wish i couldve met you! ive been following you since you lived in PA
Wrap the roof in orange 🍊
There's no factory toe hooks because you'll never have to toe a Tundra.
ua-cam.com/video/-3Fl3IXNXlA/v-deo.html
TRUE 🙌🏻😎
That escalated quickly...
Am I crazy or did I miss the video where he goes over the garmin switch for this truck??
ua-cam.com/video/xxi-tsScH3s/v-deo.html
Hit on it quickly because there’s not much to them. Easy install and they have not failed me yet.
@@TalonSei my man 👏🏻👏🏻👏🏻👏🏻
Sheeesh
👍
You look so tiny standing next to that monster.
🔥
Looks heavy
It’s not 🤷🏼♂️
That dude is short
It’s the racks fault 🤦🏼♂️
Since it's a stubby bumper. The sides extra clearance side wing bumper would be better. It will still maintain better OEM looks than the full bumper. In my humble opinion. No offense. Just sharing, mate.
There are no high clearance sides with the bumper right now.
What happened to Running for Tacos
bro this mans is 5'nothing he standing next to a monster truck
All that can be yours for 130K lol
Not even close
Hater!! You’re jealous because you cant afford one ✌🏻
Please sell it to me lol for real
Love it all, minus all the fucking stickers.
lol why is the tailgate handle looking like a photoshopped chevy silvarado symbol
Not a fan of a big black mustache look on new Tundra
Mustache was chrome. Now it’s wrap matched.
How much did Toyota pay this guy . Over priced inferior 6 Cylinder with major problems . Forget to replace the valance replace that 6 Cylinder that will be nothing but a financial nightmare.
Who hurt you? 🥲