@@BMWDoctor does this give full 100% compatibility on G series Dean? Seen a few reviews using other adapters not on the recommended Bimmercode list and there’s options not available. Cheers
Excellent video👍🏻 I have question: I have a Japanese F20 from 2018. Is it possible to code off the reverse gear gong using expert mode in instrument cluster?
I have a BMW M4 convertible - can I use BimmerCode to program the key to open and close the roof? Also can I use BimmerCode to get the mirrors to filled in and out when locking and unlocking? Many thanks regards, Tony
I recently updated my 2012 F30 front halogen lamps to genuine BMW LEDs. The problem is the lights come on briefly and flicker before turning off. I've tried to code in bimmercode by activating LEDs but this hasn't resolved the problem. Am I doing something wrong? Or is an alternative solution needed? Any help appreciated, thanks 😊
greetings ~ if you know, can you answer the question for me? Bought with license Bimmercode and bimmelink and OBD. I own two N52 engines, and I changed the gaskets on the valvetronik engine. Now I'm interested in how to calibrate it to the initial position. Can I do this using all the above licenses. thanks in advance
Hi, is there any way to code out the comfort access on my 640d with bimmercode, my car says increased battery drain when car is sleeping and I suspect this could be the issue. Thanks
Hey @BMW Doctor, since you have the Launch X431 also, After using Bimmer code i noticed my Launch X431 Elite 2 is no longer able to connect to my 2011 x5 x40d. I get DiagnoseMain ErrID: -6 and "Disaccord between the software serial No. and Smartbox serial No.", "Additional Information: Diagnostic service failure, please start it again". I can use the generic OBD2 part of the software but not the BMW specific one. Have you noticed this?
is there a way to reset the code back to factory spec? ive lost my bimmercode backups. trying to chase some fault code on bimmerlink (in error memory), but i cant tell if it is bimmercode related or if its a possible electrical issue, water intrusion from a botched carwash. is there a safe way to reset the whole car? don't feel like taking it to a dealership since im out of warranty.
I have recently bought a 2014 1 series, and just bought a compatible OBD Adapter and have also paid for the Bimmercode App. Unfortunately, I don't see most of the stuff like Head unit settings etc.
Ok question I own a 2014 328i an my dash screen is stuck on BMW logo an trying to reboot whats the cause of it dont have control's an radio aint working too is it my combox...please help
Hi mate, would simple errors like headlight errors after changing to aftermarket led, block you out of the FRM in BimmerCode and throw up a critical error message, everything works on the car BimmerCode won’t let me even open up the FRM menu ? Thanks
I bought vgate I car but when connected with the car bmw g05 I can’t found front electronic module like your video. Can you tell me why. Thank you so much.
Hello Doctor Dean, i have seen these youtubers talking about coding with vehicle on, i wanted to find out if that was advised. I have a Schumaker 12v charger but not anything that would hold 14v. If not recommended to code with it on, is that charger acceptable for minor coding? Like one or two options at a time?
SZL was replaced in my 2015 BMW M235xi, but the paddle shifter, horn, and steering wheel heater are not working. Is it possible to code in the SZL using expert mode in FEM? I believe the necessary adjustments are in 3140 PfLinSteeringWheel - LIN_VARIANTE_SZL. Please assist me with this. Please keep in mind that the replacement SZL is not brand new. I bought it on eBay.
hy , i whant to know if thsis device suport a NOx desulfing procedure on a e60 N53 engine ? have the function ok testing thincs ? i need to make a ,, regeneration " to my nox filter .... thx !
Hi mate, great video, I'm about to dip my toes into this department, I've bought a 2018 440i f36 from japan with the 6wb digi dash. Does bimmercode have the capability to code out kmh speedometer to mph? If so would this be in expert mode within instrument cluster menu? Can't find any vids online regarding this. Also need to code in a new virgin 6wa dash to a 3 series active hybrid from japan also so being able to do this myself would be beneficial moving forward. Thanks @bmwdoctor
Right just to start im not technically minded just a frustrated new car owner. I purchased a new m135i f40 and was shocked to find that adaptive headlights have to be purchase via BMW APP at £150! I was wondering can this app unlock this function and others that might be hidden from factory also will my warranty be affected by basic upgrades via this tool. Again im not a technically minded individual and im not a young man so not interested in making the car do any crazy stuff. Thanks in advance ☺
Is it possible to code out the warning for tpms, ad I want to fit a 2nd set of wheels without the expenses buying and coding a 2nd set of tpms, been quoted £300.
Hallo from germany. I have a 530e G30 and I have coded the M-Cluster. But my Problem is, that the battery control on the right is missing. Do you know if its possible to get it back in the M-Cluster? Maybe in Expert Mode?
hi i bought the obdlink and the full version of the bimmercode. so i am trying to coding out the sos light for the e90. i seen couple video how to do it, but doesnt work out. do you know if the bimmercode can do it, and also if you can make a video of how to do if with the bimmercode that will be great. for the e90
Don't know what I"m doing wrong, but all those options appear in Demo mode (but can't code with them) but when I paid the $50 for the full version and connected half the options (including legal disclaimer and advanced crash) are not there.
Hi there from Australia, new to bimmercode, and after trying to change a few service interval configurations, I seem to have a microfilter service stuck on 12/2001 and I have also added glow plug and dpe regen to the dash menu. This is a 2011 e90 2l petrol. Please help, I think the cluster module has maybe swapped something wrong??
Hi After Bimmercode app coeding bmw f30 i got an error message with negative 260 tkm "inspection check' with 2004 year, car is 2013/14! Before coeding all the stuff like in video it was normal with next service message at 2023 year?! How to return that back or delete error, with button cluster i reset and it comes back after few minutes.
Can we delete the Secondary Air Pump on a 2000 E39 with this puppy? My independent BMW mechanic in Germany can't do it because it's a US model, and I'd love to get rid of those constant warning lights.
I tried to code my mirrors to close when I push my close button, but it still does not do it unless I leave my finger on the close button for 3-5 seconds? but i had that feature already? any help
Great video, thank you. I just received my 5.1 OBDLink2 CX and will start to customize my F30. Besides the app and the tool, what other things i need to do before i start coding. Engine off/on, telephone in airplane mode, if i am not going into expert mode any chance of bricking the car, etc ?
You can't brick anything with coding. Everything is backed up each time you are coding. Coding just is reading an XML file from the module. You just write a byte to the XML. If the coding is invalid, you will get a bunch of errors but Bimmer code can restore the default coding
Hi, can you help? I am really annoyed by the auto movement of steering wheel on switch on/off in 5 series g30, how can I code it to deactivate using BimmerCode?
Hi Dean great video very informative but I have bimmer code using the obdlink cx dongle but it's saying can't code my footwell module even though everything works with no faults apart from my map reading lights turn on then turn off a few seconds later and don't turn back on till you restart the car my car is a 2010 bmw x1
dr dean, i know u dont know me from Adam. but i just bought my very first BMW e46 330i m sport touring 9individual i think) mate because of you and your amazing videos. helping me make my mind up they are easier than i first thought, now i always loved BMW and wanted the m3 version. when it first came out wow. even now beautiful but i cant afford it ATM, so i got the closet as possible. i wish to start my own channel doing it up myself and other cars also not just BMW and general messing about with toys. dean if you havent thrown it away would it be possible to acquire the Carly think please>( i have no clue at all about coding so think this is best first to learn, and as im disabled and dont work because of disability i any help would be amazing mate,, but whatever happens you are a BMW guru bud keep it up please you help more than you know bud, all the best big boy aka Shaun
Hi Doc, i just bought the Vgate adaptor via referal link, and for some reason i can't have access to Body Domain Controller with this adapter. Any thoughts? Car : G30, bimmer code installed on Android . Thank you in advance! PS: Great video !keep up the good work !
Has anyone been able to code in a retro fitted stalk with HBA I have had one fitted to my g31 19 plate that came without HBA I have had it in for coding at main dealers who were unable to code it they say they need to contact BMW as the car did not come with it. I can't understand why if the car see's it that it says "function aquairable" via conected drive but its not shown as somthing I can aquire from conected drive?
I like the app alot and I used it as I can save and reupload the setting easy if I'm going to the dealer, but I ran to an issue when they said they will fix it but they never did, it was KAFAS expert mode, they had it with expert mode active in the Demo but when I purchased the full version its was not active, I contacted them and hey said they will added in the next few days, 2 month later still nothing and there is no ETA... ps. the demo mode now has no Kafas or expert mode.. love your video please keep em coming!
Of course my friend I have a lot coming especially with BimmerCode and other apps. I will find out what’s going on with the expert mode, but I think the reason they don’t allow expert coding is due to FSC codes, and it’s risky if you touch the expert mode you could end up erasing the FSC codes from your KAFAS which you don’t want.
Is there a setting in Expert Mode that allows the windows to close on a short (!) press on the lock button on the key? On long press it works of course.
For Coding, I use the ProScan eNet OBD2 Interface Ethernet with an USB-C Adapter in Airplane Mode. For BimmerLink, I use an UniCarScan UCSI 2000 in Android, with an Extension for Extraction.
Merhabalar ben sport+ modunu açtım ancak sadece i drive ekranında görünüyor gelişmiş gösterge de seçenekler arasında görünmüyor lütfen yardımcı olun please help
Hi ! I just make The conversion to xenon on my e90 2006-2007 all the wires are all good but I don’t know the code for coding on bimmer coding! I have full licente , can anyone make one tutorial or something to helping me! Thanks!
I think that you already have it finish as a coding option in bimmercode without enter expert mode, im going to do this retrofit + add auto dip. Im hoping that bimmercode can code the auto dip
I have this dongle & app and used it to code start/stop, digital speedo, lower the heated seat temperatures & door leds to on in reverse. All very simple & easy to do. What I would love to do is change the dash lights but can’t find this option. Dash lights work in 3 modes. 1. Off, no dash lights. 2. Dash lights on, heating display white & fuel gauge area unlit. 3. Dash lights on, heating & fuel gauge area lit & red. I find this really annoying as at dusk it keeps switching between 2 & 3 and is distracting. Would love to code it to be like a normal car as in only 1 & 3. Anyone know if this can be done?
Click here to buy the BimmercodeOBD Adapter : amzn.to/3xNxOFl
Yes it does All E series , F series , G Series
Hey if I move to Europe can I buy your M5?
@@jessepickar3297 which one ?
@@BMWDoctor the e60 I think. The older one
@@BMWDoctor does this give full 100% compatibility on G series Dean? Seen a few reviews using other adapters not on the recommended Bimmercode list and there’s options not available. Cheers
I laughed so hard when you said ''Some idiot will end up deploying the airbag in their face''
Which is the best adapter for bimmercode app . Help . I have the E84. (2013 X1 sport)
Excellent video👍🏻 I have question: I have a Japanese F20 from 2018. Is it possible to code off the reverse gear gong using expert mode in instrument cluster?
Hey pal. Do you know is there a list of explanation of codes from expert mode? I need to code out light cornering in my bm
I have a BMW M4 convertible - can I use BimmerCode to program the key to open and close the roof? Also can I use BimmerCode to get the mirrors to filled in and out when locking and unlocking? Many thanks regards, Tony
I recently updated my 2012 F30 front halogen lamps to genuine BMW LEDs. The problem is the lights come on briefly and flicker before turning off. I've tried to code in bimmercode by activating LEDs but this hasn't resolved the problem. Am I doing something wrong? Or is an alternative solution needed? Any help appreciated, thanks 😊
greetings ~ if you know, can you answer the question for me? Bought with license Bimmercode and bimmelink and OBD. I own two N52 engines, and I changed the gaskets on the valvetronik engine. Now I'm interested in how to calibrate it to the initial position. Can I do this using all the above licenses. thanks in advance
Hi, is there any way to code out the comfort access on my 640d with bimmercode, my car says increased battery drain when car is sleeping and I suspect this could be the issue. Thanks
Hey @BMW Doctor, since you have the Launch X431 also, After using Bimmer code i noticed my Launch X431 Elite 2 is no longer able to connect to my 2011 x5 x40d. I get DiagnoseMain ErrID: -6 and "Disaccord between the software serial No. and Smartbox serial No.", "Additional Information: Diagnostic service failure, please start it again". I can use the generic OBD2 part of the software but not the BMW specific one. Have you noticed this?
Is an external battery charger necessary? Using bimmercode and obdlynx adapter
I am upgrading to electric seats from the basic type on my F22. Will this allow me to code in the new seats?
is there a way to reset the code back to factory spec? ive lost my bimmercode backups. trying to chase some fault code on bimmerlink (in error memory), but i cant tell if it is bimmercode related or if its a possible electrical issue, water intrusion from a botched carwash. is there a safe way to reset the whole car? don't feel like taking it to a dealership since im out of warranty.
I have recently bought a 2014 1 series, and just bought a compatible OBD Adapter and have also paid for the Bimmercode App.
Unfortunately, I don't see most of the stuff like Head unit settings etc.
Ok question I own a 2014 328i an my dash screen is stuck on BMW logo an trying to reboot whats the cause of it dont have control's an radio aint working too is it my combox...please help
Hi mate, would simple errors like headlight errors after changing to aftermarket led, block you out of the FRM in BimmerCode and throw up a critical error message, everything works on the car BimmerCode won’t let me even open up the FRM menu ?
Thanks
I bought vgate I car but when connected with the car bmw g05 I can’t found front electronic module like your video. Can you tell me why. Thank you so much.
Hello Doctor Dean, i have seen these youtubers talking about coding with vehicle on, i wanted to find out if that was advised. I have a Schumaker 12v charger but not anything that would hold 14v. If not recommended to code with it on, is that charger acceptable for minor coding? Like one or two options at a time?
SZL was replaced in my 2015 BMW M235xi, but the paddle shifter, horn, and steering wheel heater are not working. Is it possible to code in the SZL using expert mode in FEM? I believe the necessary adjustments are in 3140 PfLinSteeringWheel - LIN_VARIANTE_SZL. Please assist me with this.
Please keep in mind that the replacement SZL is not brand new. I bought it on eBay.
Could I code new fuel injectors with BimmerCode? Really don’t wanna have to buy another program just for a one time service lol.
Did u figure out if it could code injectors?
Will you need a reflash if you mess up an any expert mode ?
Can i have the exhaust flaps always in sport mode through Bimmercode? Tjanks on advance. 🙂
hy , i whant to know if thsis device suport a NOx desulfing procedure on a e60 N53 engine ? have the function ok testing thincs ? i need to make a ,, regeneration " to my nox filter .... thx !
Will one of these work with an e90 n47 320d? With bimmercode? And do people use the wifi or bluetooth ones? It's with an iphone.
whats the difference between the dongles i have the OBDLINK CX i seen some more expensive is there a difference between them
Very detailed ty. Do you know if bimmercode can be used to sort an ews issue?
Really nice app, impressive how much access it gives to each module
hello, I want to ask if I can code the auxiliary module for the BMW E60, the car does not have it from the factory
Is the gear shifting sound coming from the speakers?
Hi mate, great video, I'm about to dip my toes into this department, I've bought a 2018 440i f36 from japan with the 6wb digi dash. Does bimmercode have the capability to code out kmh speedometer to mph? If so would this be in expert mode within instrument cluster menu? Can't find any vids online regarding this. Also need to code in a new virgin 6wa dash to a 3 series active hybrid from japan also so being able to do this myself would be beneficial moving forward. Thanks @bmwdoctor
Right just to start im not technically minded just a frustrated new car owner.
I purchased a new m135i f40 and was shocked to find that adaptive headlights have to be purchase via BMW APP at £150!
I was wondering can this app unlock this function and others that might be hidden from factory also will my warranty be affected by basic upgrades via this tool. Again im not a technically minded individual and im not a young man so not interested in making the car do any crazy stuff.
Thanks in advance ☺
Is it possible to code out the warning for tpms, ad I want to fit a 2nd set of wheels without the expenses buying and coding a 2nd set of tpms, been quoted £300.
Hallo from germany.
I have a 530e G30 and I have coded the M-Cluster.
But my Problem is, that the battery control on the right is missing.
Do you know if its possible to get it back in the M-Cluster?
Maybe in Expert Mode?
Hi ! I need Disable welcome gong complete from my sound system. Belt warning to. Best coding soft for me ? BMW 528i e60 2010
hi i bought the obdlink and the full version of the bimmercode. so i am trying to coding out the sos light for the e90. i seen couple video how to do it, but doesnt work out. do you know if the bimmercode can do it, and also if you can make a video of how to do if with the bimmercode that will be great. for the e90
@@guyluo949 did it work out?
Hi, is there any chance to keep active always "Auto H" ? in Bimmercode ? Or how to activate this "Auto H"
Hi...i have 2020 530e can i change burbles with this bimmer code..?
Hi I have a 2014 640d can I change the sound to a m6 in the 1st section you showed?
Can you code out the parking sensors keep beeping even when I come out of reverse and don't stop until I drive ??
Will this work on a 2011 750il ? I had to change the cluster I was wondering if this app can correct the miles ? Thank you nice video
is it possible to turn off the adaptive lights that follow curves with bimercode?
Don't know what I"m doing wrong, but all those options appear in Demo mode (but can't code with them) but when I paid the $50 for the full version and connected half the options (including legal disclaimer and advanced crash) are not there.
Hi there from Australia, new to bimmercode, and after trying to change a few service interval configurations, I seem to have a microfilter service stuck on 12/2001 and I have also added glow plug and dpe regen to the dash menu. This is a 2011 e90 2l petrol. Please help, I think the cluster module has maybe swapped something wrong??
Hi
After Bimmercode app coeding bmw f30 i got an error message with negative 260 tkm "inspection check' with 2004 year, car is 2013/14!
Before coeding all the stuff like in video it was normal with next service message at 2023 year?!
How to return that back or delete error, with button cluster i reset and it comes back after few minutes.
Can BimmerCode resync your EWS? I see expert mode under security but not sure which setting it is
using bimmercode as well on my F10 2016 and i don't have the active sound design tab on my screen, any advices ? using vgate icar bluetooth
Can we delete the Secondary Air Pump on a 2000 E39 with this puppy? My independent BMW mechanic in Germany can't do it because it's a US model, and I'd love to get rid of those constant warning lights.
I tried to code my mirrors to close when I push my close button, but it still does not do it unless I leave my finger on the close button for 3-5 seconds? but i had that feature already? any help
Hi, can Bimmercode be used to code s677 audio updates from the standard s676 option
Many thanks
i upgarded my 540i to m5 big brakes, i there a way that i can code it using bimmercode?
Bro I want to show how much fule in the tank how can i do that?
Also i want to see the intake temperature please help
Great video, thank you. I just received my 5.1 OBDLink2 CX and will start to customize my F30. Besides the app and the tool, what other things i need to do before i start coding. Engine off/on, telephone in airplane mode, if i am not going into expert mode any chance of bricking the car, etc ?
You can't brick anything with coding. Everything is backed up each time you are coding. Coding just is reading an XML file from the module. You just write a byte to the XML. If the coding is invalid, you will get a bunch of errors but Bimmer code can restore the default coding
Hi will this do my adoptive headlights on my bmw e93.
9CC2 FRM?
Hi, can you help? I am really annoyed by the auto movement of steering wheel on switch on/off in 5 series g30, how can I code it to deactivate using BimmerCode?
Really good to be able to turn off the DRLs finally
sir, have you tried to hook up your obd 2 cable to your artidiag 800?
Hi Dean great video very informative but I have bimmer code using the obdlink cx dongle but it's saying can't code my footwell module even though everything works with no faults apart from my map reading lights turn on then turn off a few seconds later and don't turn back on till you restart the car my car is a 2010 bmw x1
Hi Doctor my F13 2012 burn a lot of oil every 300 or 400 kilometers one liter please I need to know way and what I should do.
Hi. Is there a way to code ability to show dab radio images on idrive 7
Will this remove transport mode on a 2002-2008 z4?
nope
Can you use BimmerCode code to code out the flat tyre warning? On an e32?
Have you personally used the Protool app. A friend of mine uses it all the time.
can i use it to delete SOS call failure in my 335i 2010?
Do you know where I can enable the park assistant to work when the seatbelt is NOT fastened?
dr dean, i know u dont know me from Adam. but i just bought my very first BMW e46 330i m sport touring 9individual i think) mate because of you and your amazing videos. helping me make my mind up they are easier than i first thought, now i always loved BMW and wanted the m3 version. when it first came out wow. even now beautiful but i cant afford it ATM, so i got the closet as possible. i wish to start my own channel doing it up myself and other cars also not just BMW and general messing about with toys. dean if you havent thrown it away would it be possible to acquire the Carly think please>( i have no clue at all about coding so think this is best first to learn, and as im disabled and dont work because of disability i any help would be amazing mate,, but whatever happens you are a BMW guru bud keep it up please you help more than you know bud, all the best big boy aka Shaun
I need help on to why my USB’s and Bluetooth stopped working can’t do any updates on I drive please help many thanks Justin
have you done a demo on a mini jcw f56
hi my 2013 bmw 740li idrive says no signal how do i reprogram the head unit
What does the gear change sound do after coding?
Hello i have by the vgate adapter and it does not work with bimercode in my E61 530d 2005.
Hi Doc, i just bought the Vgate adaptor via referal link, and for some reason i can't have access to Body Domain Controller with this adapter. Any thoughts? Car : G30, bimmer code installed on Android . Thank you in advance!
PS: Great video !keep up the good work !
hello to everyone! do you have any idea how I could get the user manual in expert mode?
Can i remove my SOS code caused by swapping out my car radio?
Will this work on an 2012 bmw 640i
awesome clip Doc.
mine's an F30. how do i code the indicators to blink more times than the default 3x?
It is not possible anymore
You are the BMW Guru not the doctor Dean 🇬🇧🇬🇧👍👍
Thanks Paul ! Always appreciate your comments 🙏 it’s a got a good ring to it 👌 I may change it later on once I get the G series rolling.
@@BMWDoctor really enjoyed the video when I get my car will look to get this product
Has anyone been able to code in a retro fitted stalk with HBA I have had one fitted to my g31 19 plate that came without HBA I have had it in for coding at main dealers who were unable to code it they say they need to contact BMW as the car did not come with it. I can't understand why if the car see's it that it says "function aquairable" via conected drive but its not shown as somthing I can aquire from conected drive?
I used the veepeak can someone tell me if it’s a good tool for coding.?
How to program e9x Instrument cluster display to read current digital speed instead of current gas milage ( the is completely un-usable)?
Are you able to fix the transmission/accelerator delay on the 135i ?
I like the app alot and I used it as I can save and reupload the setting easy if I'm going to the dealer, but I ran to an issue when they said they will fix it but they never did, it was KAFAS expert mode, they had it with expert mode active in the Demo but when I purchased the full version its was not active, I contacted them and hey said they will added in the next few days, 2 month later still nothing and there is no ETA... ps. the demo mode now has no Kafas or expert mode.. love your video please keep em coming!
Of course my friend I have a lot coming especially with BimmerCode and other apps. I will find out what’s going on with the expert mode, but I think the reason they don’t allow expert coding is due to FSC codes, and it’s risky if you touch the expert mode you could end up erasing the FSC codes from your KAFAS which you don’t want.
@@BMWDoctor oh yeah didn't think of that, thats good to know, Thank you for lighting my knowledge!
Can you stage 1 tune with bimmercode?
Hello Maestro . Can you tell me please the coding for revers camera on f20 2013 CIC please with BimmerCode ? Thank you 👍🏻👍🏻
it dont work for my bmw e91 i recieve a error that this adapter is not for my car(bmw e91 320d touring)
I was messing with BimmerCode and my audio on my radio is now off. Just the audio everything else comes on. What should do ? Thanks
Use a backup?
Is there a setting in Expert Mode that allows the windows to close on a short (!) press on the lock button on the key? On long press it works of course.
You dont even have to go in expert mode - it is in simple menus there.
hello can yuo help me please . i would like retrofit regular back miror as high beam assist after that its posible code with bimmer code???
You will need to change the szl with high beam assist as well to make it work
For Coding, I use the ProScan eNet OBD2 Interface Ethernet with an USB-C Adapter in Airplane Mode. For BimmerLink, I use an UniCarScan UCSI 2000 in Android, with an Extension for Extraction.
BMW doctor will device work on a 1st gen Mini r 50
hello
I love this lil device,
let me ask you , will I be able to reset my EDC mode after replacing my struts?
I have an F10 2012 .
Which OBD adapter do you recommend for VW Gli/Gti
Could you tell me how to code virtual driver view m850i
Does it work on E36 316i?
sorry but the vgate car pro is not working anymore with bimmercode and bimmerlink
Hvala! Thx🖖🏼
Merhabalar ben sport+ modunu açtım ancak sadece i drive ekranında görünüyor gelişmiş gösterge de seçenekler arasında görünmüyor lütfen yardımcı olun please help
Hi ! I just make The conversion to xenon on my e90 2006-2007 all the wires are all good but I don’t know the code for coding on bimmer coding! I have full licente , can anyone make one tutorial or something to helping me! Thanks!
I go on expert mode but I don’t know how to do from there!
Can you explain how to code mirror after électric mirror retrofit with bimmercode ? Need to code with expert mode?
I think that you already have it finish as a coding option in bimmercode without enter expert mode, im going to do this retrofit + add auto dip. Im hoping that bimmercode can code the auto dip
If you don't mind me asking, can I msg you privately?
I have this dongle & app and used it to code start/stop, digital speedo, lower the heated seat temperatures & door leds to on in reverse. All very simple & easy to do.
What I would love to do is change the dash lights but can’t find this option.
Dash lights work in 3 modes. 1. Off, no dash lights. 2. Dash lights on, heating display white & fuel gauge area unlit. 3. Dash lights on, heating & fuel gauge area lit & red.
I find this really annoying as at dusk it keeps switching between 2 & 3 and is distracting. Would love to code it to be like a normal car as in only 1 & 3.
Anyone know if this can be done?