Hi, thanks for the video 👍. I have Milwaukee and it is really a great, little tool. It is not cheap, but I don't regret a single PLN spent on it ;). But after what I saw, I am getting Parkside as well. Looks promissing.
I bought it recently and...I cannot recommend it. At least not for task like wheel changing. It can bearly losen wheel bolts in Opel Astra (so rather a small car). It really needs some time to do that, one can see that this task is a chalange for this tool (bolts tightened for 130Nm). I am using 4ah battery. In my opinion, it does not have the mentioned 300Nm. So for smaller tasks, why not, it is lightweith and small, but for bigger bolts it is better to look something with 18/20V. I have Milwaukee mentioned here in the video and few other 18V impact wrenches, Parkside is weakest of them all for sure, but also the cheapest. Maybe it is not a bad tool (cannot judge already as I only have it for a week now), but for sure it is not suitable for more demanding tasks.
Great video! just one tip Never drive a wheel bolt directly with an impact wrench! Always thread it by hand a turn or two before going for it with the power tool. 90% of the time it will be okay, but the other 10% you will hate your existance :D
I'm not sure you guys understand this has variable trigger, meaning if you're just barely pressing it, there is no force and the slightest resistance will stall the motor. Meaning if you're not an idiot and using the trigger properly it physically cannot crossthread because it doesn't have the strength. Worse case scenario it turns like a quarter of a thread, get stuck, you reverse, and go back in and nothing happened.
@@imnota Still a no no in my book screw all the way by hand and then torque, be assured this guy does know about power tools with variable triggers, I do have one or two myself, you said it yourself it can get stuck on a thread, that's my point you would feel that was going to happen by hand, your way is definitely not my way.
@@Ronick-Q-46 so nothing bad happens but it's still bad ? Good argumentation. I get YOU might not be comfortable doing it, and that's fine but it's useless to go and tell other people what they should be doing, when there's no wrong if you're being responsible.
Comme toujours très bonne présentation est un test vraiment très professionnel... C'est très intéressant, d'ailleurs j'ai également fait l'acquisition de plusieurs clé à choc 12 volts comme présenter dans votre vidéo de votre test grâce à vous messieurs et surtout à tous les test que vous réalisez cela nous permet de comparer en direct les différents outils PARKSIDE dans la réalité plutôt que de lire la notice là au moins on a un avis objectif.!!merci beaucoup pour le partage de vos test Bonne continuation à bientôt. Le ch'ti gars du Nord. (de la France) 😜😉👍🙋🏼
Bought the 3/8 and 1/2 Stubby kit. The 3/8 Actually hits harder than the 1/2 when I put a 3/8 to 1/2 adaptor so I mainly use the 3/8 for everything. I use a 6.0 and the newer 2.5 High Output torpedo battery. BTW the hammer mechanism on the Parkside is larger than the Milwaukee so it should have made more power 🤷♂️. Pretty sure if they drop a better brushless motor it would be a different story👍🏻
Luckily, we here in Ireland only get the junk from Lidl & seldom see even a hint of any of the "Performance" range of tools. Would we buy them? Yes we would. Do we get to? No we don't.
can you test the parkside in cold temperature? just place it in the fridge for an few hours and then test if it works on standard load. Lot of their tools don't work. I have the Performance Drill and I must to buy specific A/ B/ C version witch works correctly.
I brought a parkside 20 v impact wrench and its brilliant. I didn't want one but needed a 20 v battery for my impact driver and couldn't get one anywhere. The whole wrench cost £49 with battery and charger. The battery alone is now £25 . I have several cordless impact wrenches and the parkside is the best one bar the mains one i have .
2:30 ... n00b. The highest reading is a Infrared Reflection because that shiny belt clip reflects infrared, that 33°C was probably your face or skin or something in the background.
yeah UK I think they are around £45 but that's without the battery and charger, the battery and charger adds another £20 ish so looks like your getting a bargain until you have to pay extra for battery and charger if you have any other Parkside power tools the batteries are interchangeable@@thecomputertech
can the milwaukee impact mechanisam fit into the parkside?, if so (they look like they might just work togeter) could you test the working torque with the frankenstein machine? as if the bpm is the same, the parkside should hit just as hard as the wakee with the same mechanism (and the spring,andvil and hammer all look different, but same dimentionaly)
Pretty cool. Do you get any insight into release dates for these tools you review? Historically, how long before release have you been provided them for review?
Ironically I see that the prototype was better built than the actual production version and probably more powerful as well. So that's what you've missed - to test them three against each other. Too bad you forgot too fast for the "first version", it was right there in your hands...
I see your point there, but the prototype will always be only a prototype - one or two pieces ever made. It won't hit the market. I do agree that it was/is more powerful.
Surprise surprise, manually machined one is better than mass production. Its kinds obvious, same stuff with cars and virtually any other thing in the World. You have to cut costs somewhere to mąkę bigger profit and so your product wont be lifetime so you can sell more
In my opinion, there is no point in testing on freshly installed wheel bolts. fresh screws are easiest to unscrew. you need to do a test after some time on screws that have had time to be in the socket longer
Здрасти, визуално предната метална част с ударния механизъм е идентична с 20 волтовия PDSSAP 20-Li, ако имаш и двете машини налични може ли да опиташ дали са взаимозаменяеми?
Could I use the parkside as drill and screwdriver? I know it's not made for that but there are adaptors. What would be the problems of doing that vs a proper drill screwdriver? Thanks!
get an impact driver if you need it, it hammers down and left/right, impact wrench just impacts left or right, and the adapters will make you go mad over time... , and if you need a drill, get a drill, you can use a drill to screw down stuff, but impact drivers need special bits to drill as drill bits dont like being impacted
I plan to get this in a couple of weeks when it comes to my region. Do I need the 4/5Ah battery, or will it still have decent torque with the basic 2A one?
I wish Parkside would produce their own version of the Milwaukee FDGA-0 12v Right Angle Die Grinder. They already have the bits in the form of the 12v cut off tool.
Здрасти колега!Виждам че имаш стенд за измерване на динамометрично усилие,та въпросът ми е ,може ли да ти изпратя 2 динамометрични ключа за проверка и евентуално калибриране?
I have purchased Parkside products in the past, BUT!! mine would stop working just after the warranty has expired. Once had a Parkside table saw & it's motor burnt out with a big flash & lots of smoke, just before the warranty expired So got a refund.
With the milwokee, you tightened the screw much longer, then with a very hot parkside machine you could not loosen it and said that the parkside is weaker... This is not a proportionate test... not even a bit!!
by now it is clear, that milwaukee uses same components (ike motors etc) as on parkside, this was already shown in lots of videos etc. they maybe build bigger hammer in head compartment and use less battery protections, that's about it. if you want quality, ergonomically designed, long lasting products, i would use other brands ( and i do) or just go with parkside, for probably less than half of money spent.
Take the 5 Ah Performance Akku for the Test. The 350 NM only with the 5 Ah Akku. By your Test have the Parkside only 300 NM. So is the Test not Correct.
thanks for the feedback. Honestly many youtubers sponsored promote small brands with a lot of torque specs with shit batteries. I talk to one after his contract ended and he returned to Milwaukee... I have Ryobi for 2 years no problem but low torque, but my workshop chief has the big Milwaukee for 5 years and he is happy about it, i guess you need to invest not to have surprise
Penso che tu abbia spiegato perfettamente tutto, non esistono video migliore, davvero tanto tanto esaustivi! Complimenti!
Please test with 2A and 5A batteries.
Hi, thanks for the video 👍. I have Milwaukee and it is really a great, little tool. It is not cheap, but I don't regret a single PLN spent on it ;). But after what I saw, I am getting Parkside as well. Looks promissing.
sklep internetowy lidla, 199 pln :-)
same thing.
Ma lavori?
I bought it recently and...I cannot recommend it. At least not for task like wheel changing. It can bearly losen wheel bolts in Opel Astra (so rather a small car). It really needs some time to do that, one can see that this task is a chalange for this tool (bolts tightened for 130Nm). I am using 4ah battery. In my opinion, it does not have the mentioned 300Nm. So for smaller tasks, why not, it is lightweith and small, but for bigger bolts it is better to look something with 18/20V. I have Milwaukee mentioned here in the video and few other 18V impact wrenches, Parkside is weakest of them all for sure, but also the cheapest. Maybe it is not a bad tool (cannot judge already as I only have it for a week now), but for sure it is not suitable for more demanding tasks.
Great video! just one tip
Never drive a wheel bolt directly with an impact wrench! Always thread it by hand a turn or two before going for it with the power tool. 90% of the time it will be okay, but the other 10% you will hate your existance :D
That made me cringe when put wheel stud straight in with gun, that's a definite no no.
I'm not sure you guys understand this has variable trigger, meaning if you're just barely pressing it, there is no force and the slightest resistance will stall the motor. Meaning if you're not an idiot and using the trigger properly it physically cannot crossthread because it doesn't have the strength. Worse case scenario it turns like a quarter of a thread, get stuck, you reverse, and go back in and nothing happened.
@@imnota Still a no no in my book screw all the way by hand and then torque, be assured this guy does know about power tools with variable triggers, I do have one or two myself, you said it yourself it can get stuck on a thread, that's my point you would feel that was going to happen by hand, your way is definitely not my way.
@@Ronick-Q-46 so nothing bad happens but it's still bad ? Good argumentation.
I get YOU might not be comfortable doing it, and that's fine but it's useless to go and tell other people what they should be doing, when there's no wrong if you're being responsible.
@@imnota It was not meant to look as though I was telling YOU of anybody else what to do, we just have different ways of tightening our nuts, Ouch😵💫
Comme toujours très bonne présentation est un test vraiment très professionnel... C'est très intéressant, d'ailleurs j'ai également fait l'acquisition de plusieurs clé à choc 12 volts comme présenter dans votre vidéo de votre test grâce à vous messieurs et surtout à tous les test que vous réalisez cela nous permet de comparer en direct les différents outils PARKSIDE dans la réalité plutôt que de lire la notice là au moins on a un avis objectif.!!merci beaucoup pour le partage de vos test
Bonne continuation à bientôt.
Le ch'ti gars du Nord. (de la France)
😜😉👍🙋🏼
Could you compare it to the non performance Parkside impact? The one rated at 400 Nm
Great review. U put a lot of effort into this video and it shows.
Glad you liked it!
Long time waiting for this one
What is the stronger in your opinion this Parkisde PPDSSA 12 A1 or the Parkside PDSSAP B3 withe 1/2 adapter on one of your videos ?
When will you compare this one with Performance PDSSAP 20-Li B3 modified?
I love it!!!! Big congratulations for Lidl for biulding this thing!
husky tools not lidl
How did you get a prototype model sneeky sneeky
35 euros for parksie only tool good price?
Bought the 3/8 and 1/2 Stubby kit. The 3/8 Actually hits harder than the 1/2 when I put a 3/8 to 1/2 adaptor so I mainly use the 3/8 for everything. I use a 6.0 and the newer 2.5 High Output torpedo battery. BTW the hammer mechanism on the Parkside is larger than the Milwaukee so it should have made more power 🤷♂️. Pretty sure if they drop a better brushless motor it would be a different story👍🏻
Now it is sold for like 30 pounds here barebone. For that price I have no complaints...
@@RichardStefanits Nice👍🏻
@@RichardStefanitswhere? These versions are not here in the uk
Luckily, we here in Ireland only get the junk from Lidl & seldom see even a hint of any of the "Performance" range of tools. Would we buy them? Yes we would. Do we get to? No we don't.
😅komisch. In Deutschland nicht. Anscheinend bekommt jeder was er verdient. 😅😅😅😅
U nas w Polsce też póki co tego nie ma, zamówiłem z Czech i zobaczymy jak się będzie sprawował.
Yeah, we only get a look at them once in 15 blue moons
@@Ranos95ile kosztuje
Same in England
can you test the parkside in cold temperature? just place it in the fridge for an few hours and then test if it works on standard load. Lot of their tools don't work. I have the Performance Drill and I must to buy specific A/ B/ C version witch works correctly.
I brought a parkside 20 v impact wrench and its brilliant. I didn't want one but needed a 20 v battery for my impact driver and couldn't get one anywhere. The whole wrench cost £49 with battery and charger. The battery alone is now £25 . I have several cordless impact wrenches and the parkside is the best one bar the mains one i have .
2:30 ... n00b. The highest reading is a Infrared Reflection because that shiny belt clip reflects infrared, that 33°C was probably your face or skin or something in the background.
Damn Sherlock, you got me 🤣
Any idea when these will be out on the UK? seeing a few people comment saying that milwaukee and parkside share the same motors etc?!?!
Hi! Price for parkside?
40 euro in Hungary, without battery and charger
It took how many years for parkside to come with it?
Great test 🤜🤛
Thank you! Cheers!
when will it be for sale in the store?
Should we expect to see these in the UK Stores ? Would be good to get hold of one!
Parkside is a Lidl range they had them in last week.
@@stevenc5227 thanks will check it out. In the UK yeh?
yeah UK I think they are around £45 but that's without the battery and charger, the battery and charger adds another £20 ish so looks like your getting a bargain until you have to pay extra for battery and charger if you have any other Parkside power tools the batteries are interchangeable@@thecomputertech
@@stevenc5227 I don’t suppose you were able to get the product number ? I can ring round my local stores to see if they have stock if so. Thanks.
@@thecomputertechno these ones are not here in the uk only the £30 drivers and drills...this wont be £30 will be much more though
Good presentation as usual 👍👍, thank you for sharing
Thank you! Cheers!
can the milwaukee impact mechanisam fit into the parkside?, if so (they look like they might just work togeter) could you test the working torque with the frankenstein machine? as if the bpm is the same, the parkside should hit just as hard as the wakee with the same mechanism (and the spring,andvil and hammer all look different, but same dimentionaly)
if he open up this two machines, he will probably see same guts inside, when it comes to motors etc, been done already.
where???@@izoyt
great test!
Pretty cool. Do you get any insight into release dates for these tools you review? Historically, how long before release have you been provided them for review?
I don't have such intel, but most of the cases a couple of weeks max
@@icku in which country?
in which country it is available?
What is the price of Parkside?
I think around £45 but does not include battery and charger which is around £22.
Ironically I see that the prototype was better built than the actual production version and probably more powerful as well. So that's what you've missed - to test them three against each other. Too bad you forgot too fast for the "first version", it was right there in your hands...
I see your point there, but the prototype will always be only a prototype - one or two pieces ever made. It won't hit the market. I do agree that it was/is more powerful.
Surprise surprise, manually machined one is better than mass production. Its kinds obvious, same stuff with cars and virtually any other thing in the World. You have to cut costs somewhere to mąkę bigger profit and so your product wont be lifetime so you can sell more
Cool tool but when will be the PPDSSA 12 A1 available in germany?
In my opinion, there is no point in testing on freshly installed wheel bolts. fresh screws are easiest to unscrew. you need to do a test after some time on screws that have had time to be in the socket longer
Of course its easier. Just like I mentioned with the M24 bolt - if this was rusty - be my guest to break it loose even with air powered tool.
Здрасти, визуално предната метална част с ударния механизъм е идентична с 20 волтовия PDSSAP 20-Li, ако имаш и двете машини налични може ли да опиташ дали са взаимозаменяеми?
Anyone know when will it be available in UK or Serbia?
When comes the parkside in germany?
okay this looks really good. and brushless nice
will this tool available in Lidl? (parkside)
How much is the runout (wobble) in your unit? Mine has almost 1 mm, which feels a bit excessive :(
What would be the price for that tool
On sale now in Slovakia and France 49.99 EUR
Finally. When it hits the markets?
Do you know when it will be realeased ?
perfect review! What thermocamera do you use in the video?
Flir C5
Could I use the parkside as drill and screwdriver? I know it's not made for that but there are adaptors. What would be the problems of doing that vs a proper drill screwdriver? Thanks!
get an impact driver if you need it, it hammers down and left/right, impact wrench just impacts left or right, and the adapters will make you go mad over time... , and if you need a drill, get a drill, you can use a drill to screw down stuff, but impact drivers need special bits to drill as drill bits dont like being impacted
excellent video. Thank you 🤝
Thank you too
Do you have a link to this product?
where did you buy that machine? I can't find it on the internet
Its sold in Lidl.
Dov'è si può comprare questo avitatore parkside?
When will it be out in Germany?
Awsome litlle tool.
So this means its stronger than the 20v 226 nm impact o.O? I always confuse the nm meanings...
Yes, this one is more powerful :)
Menyibe kerül a parkside ára?
Parkside ist for 1/4 of the Milwaukee price!!! One for home the other for work.
I plan to get this in a couple of weeks when it comes to my region. Do I need the 4/5Ah battery, or will it still have decent torque with the basic 2A one?
When do you know when it will be available ? Do you know the model number and when it should be available in UK?
Човек знаеш ли кога ще го пуснат в Германия нямам търпение да си го поръчам?
Обикновено 2-3 седмици след като съм се сдобил с тях и вече се появяват по Европата. Имам предвид тези, които не са прототипи.
@@icku дано да излезе по-бързо :) ако не е тайна , коя фабрика ще ги произвежда?
@@codingbmwsofia2818 на Гризли ще са
@@icku това няма да е добре , ако са с качеството на в2 😂😂😂за тези , които пазаруваме онлайн от България 😂дано да са на добра цена поне 😂
parkside there is a smaller battery, what I see is 2.0 amps
you can get 4 and 5 Ah 12v batteries too.
I wish Parkside would produce their own version of the Milwaukee FDGA-0 12v Right Angle Die Grinder. They already have the bits in the form of the 12v cut off tool.
elle est disponible dans quelle paye merci
I'm thinking how I can swap impact wrench shaft witch dual option with hex inside for bits, nad how hard it will be 😂
Buy an adapter
@@tannerwest6823 ya, I know but I don't want an adapter, when you screwing screw directly it's more stable without adapter.
@@-_Arturo_- I get what you’re saying now. You want it where you can use it either way. 2 different options
@@tannerwest6823 yes, exactly. Some one upgrede 20V version of parkside in this way, but it is a lot effort if you don't have a machine shop.
Nice review, but please for wheel nuts, thread them by hand a few times first. The way you did, is a disaster to happen!
What is price of parkside with battery and charger
45 € without battery and charger, only body
Здрасти колега!Виждам че имаш стенд за измерване на динамометрично усилие,та въпросът ми е ,може ли да ти изпратя 2 динамометрични ключа за проверка и евентуално калибриране?
Здрасти! Не предлагам такава услуга. Съжалявам.
can you test with battery 4amp
It is a 4ah battery. You don't pay attention!
Знам че си българин и за това пиша на български. Каква е цената на Парксайдас батерията и кога биха го пуснали в магазинната мрежа
Предполагам до месец. Нямам представа за цената. 150лв макс, нещо такова
TOP!
Omg 190Nm on alloys? You screwed it.
Nice! Thank
Any time!
I have purchased Parkside products in the past, BUT!! mine would stop working just after the warranty has expired.
Once had a Parkside table saw & it's motor burnt out with a big flash & lots of smoke, just before the warranty expired So got a refund.
Sorry to hear that
With the milwokee, you tightened the screw much longer, then with a very hot parkside machine you could not loosen it and said that the parkside is weaker... This is not a proportionate test... not even a bit!!
by now it is clear, that milwaukee uses same components (ike motors etc) as on parkside, this was already shown in lots of videos etc. they maybe build bigger hammer in head compartment and use less battery protections, that's about it. if you want quality, ergonomically designed, long lasting products, i would use other brands ( and i do) or just go with parkside, for probably less than half of money spent.
is that actually true though? do parkside just copy milwauke 12v tools then i guess?
Take the 5 Ah Performance Akku for the Test.
The 350 NM only with the 5 Ah Akku.
By your Test have the Parkside only 300 NM.
So is the Test not Correct.
Làm thế nào tôi có thể mua nó
Great Video, do you have any information when it will be at the stores in Europe?
Its already in stores in Czech republic and Poland I think.
Okay, thank you. Cant wait to see it in Germany 😍
You are right, it is available in the Lidl Online-Shop of Poland
Good dzop majster
Nice 👍👍👍
Would have been better to produce a 20v version with same size, could have been way more powerful
Parkside is copying, not inventing :D
@@icku :) it makes sense
They do have a 20V version
@@ickubought it on lidl France online. Pretty good looking machine
We only get the old junk in aldi England
Zabezpieczenie jest w baterii!!
in my country parkside is 10x cheaper than milwaukee so i think its worth its price
Lidl impact will get it done, for a short amount of time.
Yeah, fuck that.
Dewalt all day long, 💯
Makita vecchia serie
indistruttibile 😅😅18volt
For DIYers,you can't wrong, in the Trade,I agree with you.😊
Nein
Ich kann es nicht glauben
Тези 5 амперовите батерии на 12 волта не ги пускат в българия май. Иначе е супер доволен съм от парксайд!
👍
you should not tighten over 110Nm the bolts on alloy rims
put a 4 amp battery on the parkside
That's a 4Ah battery :D You don't pay attention.
Actually, from some reviews 5A parkside battery is more powerful than 4A. So when you have one, the results may be different.
I guess Milwaukee has 6amps too xd
and more amps peak in milwaukee (20A max parkside , 30A in milwaukee)@@burak7638
I ordered two times the Parkside. Its 100% junk! It brokes after few tires!
thanks for the feedback. Honestly many youtubers sponsored promote small brands with a lot of torque specs with shit batteries. I talk to one after his contract ended and he returned to Milwaukee...
I have Ryobi for 2 years no problem but low torque, but my workshop chief has the big Milwaukee for 5 years and he is happy about it, i guess you need to invest not to have surprise
Sorry ment lidl England
Don’t waste your money on parkside their a one use piece of junk I have a 20v used once gearbox broken motor goosed.
Come on, it’s not happening to everyone and they have good warranty
parkside is garbage, the milwake will last at least 15 years working everyday, parkside , yeh no, cheap to buy, no parts .
I have no clue at all what this Parkside is, but from own experience I can tell you Milwaukee will not last. its way overrated.
Parkside = Park it aside. No good
Parkside fake 👎👎👎
🤣🤣🤣🤣🤣
Then all drills are fake,everyone copies of each other,Chinese are masters of fake goods,Parkside are no different.
Малък разбойник 😁
@marekskvarek3589 super video