How to fabricate Temporary Teeth with a Clear Stent
Вставка
- Опубліковано 19 кві 2021
- In this video, we share how to fabricate a Clear Stent used as a Long-Term Temporary, cover the creation of the Stent as well as creating the Temporary Teeth.
#howto #temporaryteeth #clearstent - Навчання та стиль
Eres un excelente profesional y me encanta tu trabajo saludos desde Colombia,gracias por compartir tu conocimiento
EXCELENTE,como siempre,Dr.Kahng.Un resoetuoso saludo desde República Argentina 👏👏
Un adevărat specialist.Felicitari pentru explicația pe înțelesul tuturor și pentru diversitatea lucrărilor.
?
This method avoids to harm the soft tissue at the missing teeth area, nice!
thanks very much to all the doctors
Amazing work. Im having my braces taken off next month and I have a missing tooth. Until I get my tooth implant, I will have to wear a clear stent with a temp fabricated tooth. Thank you
True artistry and beautiful music 🙏
Oi Luke, estou fazendo curso pra ser protetica, e sou fã do teu trabalho, tenho seguido teus vídeos, e com isso vou aprimorando o meu estudo, nossa, que grande profissional teu, sou do RS, Brasil.. um grande abraco
Saludos Dr desde Costa Rica
Estoy muy admirada con su trabajo
That was really neat.
you give us confidence with truth
Great work
Big idea!!!!! Thanks.
I follow your work, I really like your work
Interesting, thanks for sharing .
Beautiful work as always!!Thank you for sharing with us your amazing knowledge!
So nice of you
beautiful thanks for sharing
Good work.
Alguien puede explicarlo en castellano Es una arte!!me encanta con que delicadesa trabaja,bien prolijo. Gracias ,gracias!! desde Argentina
I love man! Your the best!
Thanks!!
I have had an implant done. And the site is currently healing. I recovered a clear stint as you made. I have it for the top front teeth.i am struggling to remove the plate when i need to brush my teeth, why is that and can it because its so tight fitting rip out my current crowns? As it is very difficult to remove the plate. And can i eat normal food with this plate. Your reply will be greatly appreciated Dr. Thank you.
Excellent
amazing
very good technique for temporary prosthesis...if patient is wearing this for say one month or two, then the posterior occlusal pattern will change due to the thickness of thermoform sheet, so i think it will better to cut the occlusal surfaces of the stent so the tooth surfaces can come into contact and not the teeth and sheet.... what do u say LSK? thank u....
me encanto el video
Can u do the wax part with liquid dam resin? Seems like that would be faster.
wow great
영상잘봤어요.구독 누르고 갑니다.
저는 호주에서 치기공하고있습니다.
역시 한국인의 손재주가 세계에서 인정받는거 같아 기분이 좋습니다.
건강챙기면서 일하세여.
Thank you very much!!!!!
E bom de ver tantas duferencas no aprender
Looks awsome
thanks!!
Thanks doc . 😜
I've been waiting a year for my new false teeth and when they made them they look like a five year old had made them I wish u would make mine ur incredible and clever u no ur stuff
Thanks!
Thanks!!!!
EXCELLENT
To fabricate this, isnit enought with upper impression or you need impression of both jaws and Bite index? Also what material do you prefer to have the impression taken with? Alginate or Silicon. Thank you!
hi can tell me how many millimeters and the thermostash that used
I got it before watching the video, Thanks, ❤👍. Pura Vida
E bom de ver novidades
I wish I could get the Rigident partials you shared on another video. Nobody has them!
Bia tarde bom o trabalho
Another solution, that we make, is if space is already created (so no teeth in the model already) and the clinician has taken the colour of the teeth, we adjust acrylic teeth (cheap ones, of course) to the model (we need an antagonist model for adjusting purposes) before the vacuum. When the vacuum is done we take out the clear stent from the model and proceed to adjust the contour. In our case, the plastic has a protecting film that we take out leaving the stent always clean if we have used wax or any other material around the teeth. At this point, if the acrylic teeth are dirty from wax, we clean them and prepare them to reinstall in their place in the stent, using adhesive. If the heel of the teeth has holes, I normally cover them with temporary acrylic of more or less the same colour, trying to avoid an excess of it so it doesn't enter in between the teeth to keep the esthetic, if possible, so this way the round surface will create a certain pressure on the natural tissue in case later on, like in your case, there will be implants or an acrylic partial. Thank you for sharing your own world, for your generosity.
Can I order one from u?
Is this available in México?
Perfeito.
Which oil Have you used for Stent??
exelent
Nice work! Sometimes the acrylic teeth separates from the retainer even when using acrylic sheets that say acrylic will adhere. Do have any advice on how to prevent this from occurring? Thanks!
Re glue back
Drill a couple holes lingually so resin lock in to retainer, that will prevent from movement or falling out.
why did you use the pressure pot? Thank you!!
super
Schöne Arbeit! schöne Grüsse aus Germany!( Kollegin aus Deutschland)
Can you do them for some one since you have the equipment an I don't. What would you charge for the video teeth you made, it's exactly what I need but don't have experience scared to mess up. Urgent need please respond.
I have one and I need to make another one because mind broke.. I will like to know if you could make me one and how much you charge.. plases need help
I wish my lab was as good as you lol
Where can I buy the mix for the teeth
How long can you wear these untill you need another pair ??
What state/city is your office located?
Hi. An interesting idea, but I have some reservations, I think that after placing the splint in the patient's mouth, an open bite will occur because the splint will raise the occlusion on the last molars. You can probably shorten the rail or make it in the bite, recreating the short circuit.
Greetings.
How did you clean the wax off the inside of the retainer?
Steam
How the stend not Wa deforming whit the hot water
Hi I need flexible dentures can you help me
I have a temporary Stent for a few weeks, while a get to finish a root canal treatment. how do I clean that stent every day and do I have to take it out to sleep or I can leave it on. I'm taking it out only when I eat then I put it right back but don't know how to clean it.
ask your dentist
Voces fazem trabalhos de fundicao e resina
Interesting ❤️❤️❤️
👌😍
What burs were used to trim the retainer?
carbide burs
저는 한국의 치과위생사입니다.성의 있고 환자를 위한 마음에 존경을 보냅니다.^^
하지만, 한국에서는 다이렉트로 임시치아를 제작하고 체어사이드에서 바로 제작하기에 디자인에도 무리없이 제작을 하는 시스템을 구축하고 있습니다.
보여주신 케이스에서의 응용은 제작한 레진치아에 와이어를 부착하여 인접치아에 레진으로 부착시켜주는 방법도 사용을 하고 있습니다.
이건 제가 선생님의 동영상을 보고 감명받아 또 다른 케이스를 전달하고 싶어 댓글을 남겨봅니다. 항상 건강하시고 행복한 치과의사가 되시기 바랍니다.^^
감사합니다
여러므로 많이 봐주셔서 고맙습니다 그리고 저는 치과 기 공사 합니다 좋은 하루 되십시오
We call these Essix Flippers. Make a bunch of them. You can speed things up by drilling a 2mm hole through the retainer on the lingual of the teeth being replaced and inject your acrylic through the hole using a syringe. What did you use to remove the wax from the retainer without distorting it?
Can u order one from u ?
@@breeelise588 In my state I'm only allowed to do work for dentists.
i usually duplicate master model, block out undesirable undercuts beforehand then suck down clear blank, pouring up tooth colour acrylic. check fit onto the master model before dispatch to dentist. It does involve extra steps for the simple job,but have been receving good outcomes from dentists.
교육용영상 감사합니다.
전 호주에서 치기공하고있습니다.
How is the bit?
I mean can Pt eat with this appliance?
I don't think so. And also a lot of work. I've done about the same appliance to myself. To fabricate this appliance it takes the same amount of time to fabricate cold cure partial denture.
The fabrication procedures interesting yes but the quality and the time not good. partial acrylic denture it takes the same amount of time with better quality.
Najwa Aziz (Denturist) from Canada
Where do i buy acrylic?
What thickness of clear sheet did you use in this video?
4 mm
Can we order this from u??
Hello this is Shelia from Ashurst Dental lab LLC
👍👍👍👍👍
what glue is the best to use as we know nothing
Gorilla glue
Where do you get the supplys???
Amazon! I am 100% serious! If you search 'dental supplies' or 'at home denture kit ' you can find everything you need. With the silicone I'd suggest getting the at home kit (make sure it comes with the impression and mold kits) and then get the silicone separately. Make SURE you get dental grade silicone, one that is safe to use in your mouth. I'm thinking about trying to make this, I have already used their at home kit to make a metal-free partial and I'm not crafty at all. It is beautiful and so much more comfortable than the bullshit*t one that I paid the dentist $1200 for. It had a metal palate, and the 3 teeth were on metal wires that scraped my natural teeth every time I put it in. I made my own and saved $1100. I'm going to try it with the silicone and see how it goes. Good luck!
Dock pls. Help me? I'm not reach people because my front of my teeth is loss, so pless help me?
저는 한국 기공사입니다. 저도 사용은 관혹 하지만, 많이는 하지 않습니다. 그곳 미국에서는 혹시 바이오스타 기계 사용시 시트의 두께와 시트 종류는 무엇인지 알고 싶습니다. 감사합니다.
Depends on the case.. 4mm
@@Lsk121 Thank you
@@master_park777 늦게 보내서 미안합니다
Me hubiese gustado verlo terminado en el paciente
You are the best👍.... But i have one Q( what about occlusion may be was high spot in posterior teeth)
Yes, occlusion is main problem here.. this techniq is only used as instant like to attend functions..etc.. patient need to pull it down for eat. Which means it is only used for cosmetic purpose. When using it permanently can cause temporal mandibular joint problems.
@@drmmohamedhussain6828 thanks Dr..
Where am I able to purchase the materials?
Nowak dental supply
Pena que nao tem traducso
😊
This video Is from '80s?
👍👋
the patient can eat with this kind of termporary?
yes!
Soft foods only.
Not really!
Onde mora . Gostei dos dentes bonitos
@@Lsk121 what kind of wax you used to make termporary teeth
Hola cómo se llama la máquina con que hico la férula
?
When i'm trimming mine, the material always ends up melting instead of trimming away. I then spend an excessive amount of time scraping off the edges with a surgical blade. Is my rpm too high?
Yes
Not to bad, but i dont make thes form here in Brasil! (Dont speak inglês very well)
اصنع زيها كثير واجبر اطباء الاسنان تركيبها لجميع الاسنان الطبيعيه والجسر. والزراعه عشان تكون اقوي با الذات الدول العربيه
احسنت
😘
i wish i had teeth but i dont know how to make my own otherwise i would
Where are ur offices are located I have do do dental work but I want to go to someone who nkos what he's doing thanyuo att ismael from Boston Massachusetts USA
we work with many dentist is Massachusetts
email us mail@lsk121.com
@@Lsk121 do you have offices in Detroit Michigan
In USA
I work in multiple creditable dental offices that use this technique in the Boston area. I can recommended a dentist if you like. Where do you live?
Anywhere near Florida?
Any one can offer a job for me but i still learning🙏
@Dani Malik wa3alaykom salam warahmato lah
أتمنى لو كنت في بلادي حتى تفهم ألم أسناني وتعرف كيف تعلجهم 😭😭😭😭😭😭😭😭😭
12,000 coverage with Humana
أحتاج لواحدة، أنا بحاجة ماسة لها، فقدت اسناني الامامية 😢
Não etendi nada o que falo
Luke - Prof. Ou TEATCHER. Eu, HORTÊNCIA DO NASCIMENTO estava com saudades. Não te vir na REDE do YOU TUBE - Aprendir THANK YOU.
LEARN MORE,
Eu, HORTÊNCIA DO NASCIMENTO fazia dentes com Chicletes ( rosas e vermelhas e colheres miniatura ( colheres cremes e brancas de doces e sobremesas. ( Mera distração minha.) THANK YOU. THANK YOU. Ok obrigado TEATCHER
piano background too loud-overshadows instructions
Bardziej wzornik implantologiczny.Implamtological tamplate.
Clinically occlusal functionality is highly questionable. Long-term use will cause posterior teeth to be symptomatic without a doubt. Study the fundamentals of occlusion.
Shouldn’t the clinician adjust the bite of the patient/ appliance when this appliance is delivered?
Pretty sure that’s why he repeatedly mentioned that this is only a TEMPORARY solution. We use this technique all the time in my practices for temporaries.
Do you take Humana insurance.. I travel 6 hours one way thought I was going to the best... Wrong.. I am in tears. Dentist won't listen to me.
Honey, this man offers his services to dentists and lab technicians only. He is a consultant, he doesn't see patients. Your best bet is to call around in your area and ask if they offer silicone partials and if they take your insurance. You may even try a Google search. Hopefully you drove six hours because you were told he was the best, and not because he was your only option. On doing so you may have bypassed local dentists that may offer this product. Sometimes a dentist may do great work on person, but someone else may need different work done and may not be as satisfied. Every case is different. Definitely start a little closer to home and make calls to see if they offer this and if they take your insurance, save yourself from another disappointment. Good luck and I hope you found someone!