Homemade Rear Truck Bumper Low Buck Diesel Truck Episode 11
Вставка
- Опубліковано 7 вер 2024
- Lets finally finish off the exterior fab work on this truck! Today we are going to build a homemade rear bumper on our J10 pickup truck! This bumper needs to be strong enough for a hitch mount so we are going to build this with pure strength in mind!
Follow along on episode 11 of the Low Buck Diesel Truck build!
Follow me on Instagram!
/ bleepinjeepnate
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on UA-cam: bit.ly/2wGeSec
• Buying a T-Shirt Here: www.bleepinjeep...
• Or Just leaving a kind comment on FB here: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
02346
A dimple die is something I've never heard of. I love learning about new things. Man that came out great. "Strong" is an understatement. It's the Titanic!
Will it sink in mud?
never heard of dimple dies until these videos. But now I love'em!
D-rings 👍
Beefy hitch with safety chain hoops 👍
Hand built 👍
Solid work 👍
Dimple dies 👍👍👍💪💪💪👏👏👏
Holy crap! Went from a "plain" bumper to a full bore mega tow bumper with some flair...makes that jeep look incredible! GREAT JOB! Simple but makes it look 10x better!
Awesome
Thanks brother! I'm glad you appreciate the hard work!
This has been one of my favorite series thus far.
Thanks!
This bumper is killer! I like how you made it simple outside but went full bore supported underneath!
Thank you! Function over form with this stuff!
That bumper completes the look of the truck! I love the simple, concise, and very functional aesthetics of all the fab work, fits the truck perfect.
That's a giant compliment! Thank you!
Nate dog is clearly the master fabricator of the BJ crew...... AWSOME build, well done sir 👏🏻👏🏻👏🏻
Glad you teamed up with bleepnjeep, you’re keeping the channel afloat at the moment.
Thank you
Agreed 100%!
I third that
@@bghouse2853 And so do I. Dandahermit.
Every time I watch one of his videos I learn something new and useful. Nate is putting in work, I’m ready for more.
Thanks! I'm glad your enjoying the content!
Great work on the rear bumper. The inverted dimple die was a good idea and it still goes with the front bumper.
Thank you!
Nate these are some of the best fabrication videos I’ve ever seen before. Do a video on the rear end rebuild
Thank you! I definitely can do that!
When is the red Jeep gonna get some love????? Can’t wait!!!
After I finish the J10 I'll start chipping away on the old cj! Lots of work between now and then but I'll get there
Man that dimpled deck is awesome . Dandahermit. Symmetry us crutial.
You guys are killing it with the J10 content. I just rescued one on my channel last month. After the 67 Cougar build I hope to do several of these projects your posting. Great Videos!
Love it! Damn havent seen dimple die in a while! Great idea! & mann I pity the fool who ever Rear ends that thing!!!
Lol I bet if it gets rear ended it will bend the frame before the bumper!
Both bumpers and all the fabricated wrk is Awesome !!
Thank you!
Love the build I think it’s the best build on bj....that rigs gonna look so good out on the trail with a dead elk in the back gonna b a bad ass hunting jeep
Thanks Dan! The idea of a giant bull elk in the bed makes super pumped to finish this truck!!!
Dude I think that old Jeep is definitely got the potential to look straight bad ass with some work
I love your way of thinking on that rear bumper.bracing in all the right spots
Thanks for taking the time to make your videos. I'm impressed
Thank you! Its alot of hard work but well worth it
Dude that truck is looking great, fun build for sure. It would be cool to have a off road camp trailer for it, do some overlanding
Shhhhh you'll ruin the surprise!
At least you have a press for the dimple dies and not a 3/4 Milwaukee impact with grade 8 bolts. Like the bumper Bro!
Thanks man!
Just finished binge watching the J10 build series and to say I am so looking forward to warmer weather here in NY state to do some work on my 87 F150 would be an understatement. Gave a thumbs up on each of the videos.
That bumper looks awesome! Since the paint is in poor condition black raptorliner on the whole truck would look really cool
Don't forget some drain holes on the ledge on the bottom. looks great!
I've really been digging this series. I've got an '86 F150 in similar condition as the J10 with the same goals in mind, so these vids have been pretty good inspiration for my junk.
"Junk inspiration" should be my nickname lol
That truck is turning out great!! Amazing work man.
Thank you!
This thing is turning out badass! All the fabrication you've done really accents the rugged old school Jeep look
Thank you! It takes Lots of elbow grease to polish this turd!
Great job Nate! Really sets the truck off nice!! Time for some paint.
Thank you! I'll be painting very soon!
Completely mind blown by this build! Thanks Nate!
Absolutely! I'm happy you dig it!
Nice work Nate, really enjoy the content you've added to the channel!
Thank you! Lots of hard work so I'm glad its appreciated
Man, I love the "low buck truck" build project! You are an inspiration Nate! Keep it up and keep Em coming! One of my favorite UA-cam fabricators.
Thanks alot CJ! I'm happy to be on your favorites list!
Love this truck and the great video quality. It’s always fun to see what different peoples mind come up with. Looks killer!!!
I absolutely LOVE this truck, and that bumper capped off the rear end of the truck. Keep up the great work, I can’t wait to see a video of the truck just out cruising.
Thanks! I can't wait either!
Bad ass set of bumpers. I want to do a set for my Jeep Wagoneer and is giving me ideas, Thanks for sharing.
Thanks! I hope you can find some inspiration for your waggy
The truck is turning out sick. Nice work.
Thank brother!
Very cool. I plan on fabbing up a front/rear bumper on my TJ build. Your videos help out a lot.
I'm glad to hear it!
Really liking the work on the J-10. Keep us updated.
I am very satisfied to watch this video. Thanks.
Gonna be a great bush truck. Dan
Dude your truck is looking more and more badass every day
Thanks man! I can't wait to get it on the road!
@@natebleepinjeep9564 Same!
that truck is a beast.
See this is what I'm talking bout. Shackles should be direct continuation of frame attach plates. Dandahermit.
I need a rear bumper for my Gladiator so bad! Yours came out great
Thank you! Now you have seen how it's done! Go build it!!!
My favorite series. Still.
I'm keeping my Comanche truck cause I live waaay off grid up in the mountains and snow. 41)2" lift for ground clearance and real rubber. Winch bumper lockers n functional shit. It's a metric ton and meant to work. No lace curtains in the window . Just a gun rack n maybe a meat boom. From the Alaskan Bush n now in NE Washington mountains. Up a serious trail. Dandahermit.
Thanks Nate! Good Work!
Thank you!
Oh hell yeah. Now your structural with the receiver. Dan
Dang son. Looking good!👌 Keep up the great work. I hope to see it out in the woods soon. Well a video of it in the woods. 👍
Thank you! Me too! I can't complete this soon enough
Looks awesome! I really need to start fabricating stuff.
Gnarly bumper! I love it! It's video's like this that make me want to go buy a welder and learn how to weld.
You should tie in some reverse lights in the bumper little off angle recessed tubes to mount some period style flare
I've been considering something similar!
i want to see a video of you doing some rust repair on the J10! You've said its a rust bucket, and its become an icon of your part of the channel, and if you spent all tht time making it preform, please make it sound!
Been loving the J10 build, its been awesome!
Thank you! Lots more to come!
The truck is looking awesome
Thanks Joshua!
Beautiful!!!
Thanks!
You've got a great shop. I'm all envy. Dan
Nice and strong bumper!. you make it look so easy.
Thank you! I'm happy I can make it look easy!
Nice video. I just finished a JCR Do It Yourself rear bumper for my 1988 XJ. It took me a long time to finish it. I did not like the fit so i had to cut, weld, test fit over and over until it came somewhat close. I do like the fact the bumper does not hang way out like it did when i did the first test fit. Nice video. I am starting to learn a lot from you. Wish I had a shop like yours but some day soon! keep bringing on the videos!
Love the commentary during the build. Goes through everything that you're doing. Love the instructions
I wanna see the jeep do truck stuff maybe cutting fire wood or a camping trip possible shooting expedition
Oh hell yeah!!
That sounds like a good video! Title "j10 truck stuff"
never thought of using the dimple dies upside down on a bumper great thanks
Thanks for the hard work. Truck looks great!
Thank you!
enjoyed this video a lot! The music was well done as well. I like watching you build stuff because it gives me ideas for my own things.
Your content is pretty sick. Much appreciated
I appreciate the kind words! Thanks for watching!
Flat out awesome! Great job it really looks good.
Thanks!
Sweet another Nate video
Nice work Nate all thats left is to design a chase rack/ ladder rack
You make it all look so easy! Thank you for the lesson.
Thanks for watching! I'm happy to make it look easy! (Its not that easy lol)
I a just now seeing the J10 videos and loving them. I recently bought a 1979 J10 with Levi's interior. It is rough and needs new bumpers because of rust and previous owner accident. I wished I could weld good enough to build some. I really do like the looks.
I’m so happy with the progress on this build, and the direction you’ve taken it in. Keep killin it!!
Thank you!
Nate’s the best
Nice! Only suggestion is maybe some cut outs for some backup lights! Awesome build brother!
The truck looks amazing bro!
Thanks Mr. Bob!
Really enjoy this series. Want to see more on the j10
Awesome!!!! Are you going to show it driving? Can't wait to see more!!! You Rock!!!
Indeed, needs some more work!
What a great build!! Your work is great
Thank you!
GRREAT LOOKING BUMPER! YOU DO GREAT WORK!
dimple die looks outstanding brother,it is a great look
Thank you! These dimple accents have been super popular with our fellow bleepinjeepers! I'm glad you guys are digging it
I absolutely love that truck. I'm collecting stuff to build a rear bumper for my dodge ram. The ones that are notorious for rotting out. I want the kind that sticks out real far so when I hit shit it moves lol
Thanks man! Lol those giant bumpers look good on giant trucks. I need to make bumpers for my ram as well
@@natebleepinjeep9564 I just want a mobile work bench lol. You're very welcome. K do property clean ups, and loan equipment repair, so I often need a work bench. I want to atleast be able to sit and rebuild a Briggs carb. I already have a vice and small anvil that will be able to slid into a hole on the bumper.
I love this series so much.
The one dis like is probably a jealous teenager with a stock Cherokee lol
Keep up the work man godly fab skills to be able to fab something that looks and I bet performs amazing can't wait for more please do a xj build nothing crazy but with your fab skills I bet you can make some sick stuff and I'd be interested in purchasing knowing you add extra beef
Thanks! I'd be willing to build a Cherokee but I have a few projects in between now and then. After I finish the j10 I'll be building a diesel jeep liberty and finally working on my 1960 CJ!
Dimple die, got to have it! Great vision and execution with this build.
A bit late to the party but have binge watched as much as possible lol. Excellent work and love the truck. Oh, please pump up the tyre on the little red number.
Keep the vids coming
ABSOLUTLY AWESOME !!!!!!!!
You nailed it with that bumper design Nate! Killer. 👍🏼
Thanks todd
I love this build! Been watching from the start and will till the end. I can't wait to see how that little diesel does when all is done. Thanks for sharing!
Thanks man! I'm glad your liking the content, it's a ton of work!
Thank you so much for the video. Helped me out on how to build the bumper for my burban. Been looking for a good video. Hope to see you at king of the hammers
Nice job, Nate!
Amazing work bud! Very clean and very strong!!
Hectic build , thank you
Beautiful bumper!
Thanks!
Excellent. A similar design will go on my 98 Dodge Ram. I'm planning on making it deep enough to mount some LED reverse lights. Thanks for posting.
Sounds like a fun project! Thanks for watching
Awesome video and awesome build. Nate: latest content creator to join BP but quickly becoming my favorite.
Looks great Nate
Thanks Josh!
great build and very clean!
Thank you!
Damn good looking bumper, almost ripped my stock bumper off pulling some kids out of the mud, need to do something like this
I love it!
Definitely be keen for a how to on alloy welding
Another great build video!
Thanks!