whats crazy is, Ijust bought a mychrone 5 last week and used it for the first time yesterday. I was thinking this morning that I should go on UA-cam and look for some videos explain how to use it............and this pop up! Life works in mysterious ways
Thanks für the Video, pretty interesting. Form eines as a beginner it would be cool if you could show how clean and what to check After a day of driving. Keep up the good work
Just bought a Mychron 5 couple of sessions ago so this video came perfectly as we're heading out for some sessions tomorrow again. Just wanna ask what you would set the led bar for on a rotax 125. I wanna use those lamps for something, just don't know what! Cheers
hey Jasper, awesome, have fun. What track are you going to? because you don't have to change gears a Rotax, you can set them to go green or red for you sector times, green if your up and red if your down. that way you can tell if you're being awesome or if you cocked something up.
@@PowerRepublic hello :) forgott your name right now sorry for that. That just shows I haven't watched your videos enough ;) we're driving on Järfälla track north of Stockholm, it's a really nice and fun track, not so fast tho. My son says he tried to set it up the way you recomended but it does'nt seem to work. I'll see if there is something he missed in the instructions but he's more technical than me so I doubt it. Cheers
@@jesperek6402 I just tried to find it on google images. what is the problem you have? in the video I think my LED's were set up for shift lights on the KZ gearbox kart, but you can select the LED's to be for other settings from memory.
I have my sector lights as described, green for up and red for down but most importantly is set your warning lights to some other colour! I almost missed my engine overheating massively because I mistook the red light for a bad sector. I changed my warning light to a blinking yellow so it stands out from the normal LED's you see every lap.
hi we have a temp sensor for rotax and not sure how to fit it because we don’t can’t find a T hose and that’s all we have found on where to screw it into but we’re racing tomorrow morning and i’m not sure what to do. Thanks
Hi derek,nice video and very helpfull for mychron 5...you make a very great job...this sport needs more dereks😉😉😉 still i hope for more videos for dd2...inst. of rear axle,inst of complete clutch and gear system and more....thanks for your great job...sorry for my switzerlandenglisch...🤣🤣🤣🤣🤣patrizio from zurich...
Hey Patrizio, thanks mate. we will have to wait for the DD2 video's until a customer brings on in for a service. we haven't got a DD2 here to operate on yet..........
I have had my MyChrons 2T for 2 years, and today at training before a race tommorow my egt (exhaust temp) sensor stopped working. Then i bought a new exhaust temp at the track shop - and the new exhaust sensor worked for 1 practice but in the second practice it also stopped working. So i might have destroyed to exhaust sensors today. Have anyone tried this or maybe i can reset the Laptimer?
A bit of digging here but I don't have the split times/rolling lap/theoretical lap page, I have all the other ones though. Any reason for that? Beacon mode set to Automatic and I only use GPS for the lap time.
I have seen that before. Someone told me that was a software update. But does your track have splits built into it/have you seen split times on other peoples dashes at your track??
Hi! Can i ask you something? my mychron 5 generates 14 partials for me when I download it to the computer (depending on direction changes). I try to do 4 partials but I don't know how to achieve it. is it made from "master map"? it always makes me 14 partials. But i think there are many partials.
Hi there, can you tell me if the LCU connects direct to the expansion hub? ( pic on mychron site shows LCU attached to data hub and data hub then attended to expansion hub)
Hi, I am about to buy a Mychron 5 with Lambda lcu one, do you know if it is possible to configure the led bar for Lambda values? Effectively using it like a tuning light set?
Hello power republic, I just started go karting and I have a mychron 5. I also have a temp sensor (for the cylinder head) but I can’t see the temperature on the screen. I made a custom display setup where I should be abele to see the temperature but it is not showing up. Do I need to set the sensor up somewhere or what am I doing wrong. I hope you can help me. I love your videos I have learnt a lot of them.
Hi Maxim, thanks for the positive vibes! make sure you turn off the the first 2 factory setting 'non custom' display settings. otherwise I think the factory settings over rule your custom 1 page. home that helps
Hi there I have a question.... I am from New Zealand and race in the rotax max light division I am moving to the Gold Coast and I am wondering my racing gear (suit helmet gloves ect ) that is legal in New Zealand will that be all legal in Australia and is my kart legal aswell or is there different rules ?
Power Republic Hi, DD2 going very well! Getting faster and faster with a lower gear ratio, I used to drive with a 35-62, now I’m driving with a 34-63, and managed to go half a second faster with the 140cc cylinder. Yesterday I bought a Mychron 5, second hand for 250 euros (brand new is 500 euros,) so I’m happy 😃 that’s why I was watching your video on the Mychron 5 , so thank you so so much! 👍
@@PowerRepublic Still nothing. Have contacted Mychron but no reply. Will ring them again tomorrow. I have reset it as per your video and will try try tomorrow morning. Thanks mate.
Yeah it might. But AIM sports have more high end loggers for 4 stroke race engines. Check out their website for details www.aimsportsystems.com.au/en/products-all.html
from the home screen you need to press the 'mem' button 4 times and that should bring up the split times/rolling lap/theoretical lap page. let me know how that goes for you?
@@PowerRepublic Im seeing everything but a theoretical best lap , maybe it has to do with the display layout settings ...Im not sure .... And on Race Studio 3 , Do you know how I can get them
Abel Fuentes the great thing about the Mychron is that each new edition builds on the previous model. The only major difference for the 4 is with the GPS being an add too, not integrated. All the button are similar with almost the same functions. And to download on the 4 you have to get a data key and save you files on it, then plug the data key into your lap top and then use race studio for analysis. Hope that helps.
Any feature that only works when the track is recognized should be disregarded as a feature since there will always be tracks that aren't in there and the the percentage of unrecognized tracks will increase over the years.
whats crazy is, Ijust bought a mychrone 5 last week and used it for the first time yesterday. I was thinking this morning that I should go on UA-cam and look for some videos explain how to use it............and this pop up! Life works in mysterious ways
google listens to our thoughts and supplies us with the information required for an awesome life experience!!!!! Thanks UA-cam
Thanks für the Video, pretty interesting. Form eines as a beginner it would be cool if you could show how clean and what to check After a day of driving. Keep up the good work
Tobias that's some great feedback.
Cheers Derek. Very handy.
your very welcome Clarke
Super helpful!!
Mark Bunney your very welcome
Just bought a Mychron 5 couple of sessions ago so this video came perfectly as we're heading out for some sessions tomorrow again. Just wanna ask what you would set the led bar for on a rotax 125. I wanna use those lamps for something, just don't know what!
Cheers
hey Jasper, awesome, have fun. What track are you going to? because you don't have to change gears a Rotax, you can set them to go green or red for you sector times, green if your up and red if your down. that way you can tell if you're being awesome or if you cocked something up.
@@PowerRepublic hello :) forgott your name right now sorry for that. That just shows I haven't watched your videos enough ;) we're driving on Järfälla track north of Stockholm, it's a really nice and fun track, not so fast tho. My son says he tried to set it up the way you recomended but it does'nt seem to work. I'll see if there is something he missed in the instructions but he's more technical than me so I doubt it.
Cheers
@@jesperek6402 I just tried to find it on google images. what is the problem you have? in the video I think my LED's were set up for shift lights on the KZ gearbox kart, but you can select the LED's to be for other settings from memory.
@@PowerRepublic try google Järfälla gokart/Järfälla MK or Järfälla hyrkart :) and I think we'll fix the leds now thank's to your tips and video :)
I have my sector lights as described, green for up and red for down but most importantly is set your warning lights to some other colour! I almost missed my engine overheating massively because I mistook the red light for a bad sector. I changed my warning light to a blinking yellow so it stands out from the normal LED's you see every lap.
Hi, Ive just bought a Kz and i was wondering if i can know in what gear am i while im racing.
As in display the gear that you have selected on the Mychron dashboard?
hi we have a temp sensor for rotax and not sure how to fit it because we don’t can’t find a T hose and that’s all we have found on where to screw it into but we’re racing tomorrow morning and i’m not sure what to do. Thanks
Hey Lloyd, it screws into the cylinder head cover (near the spark plug). hope that helps
Power Republic Thank you very much
Hi there. On the track management, can you upload the track from race studio?
hey Kenny, do you mean make a track map in race studio?
@@PowerRepublic i mean upload the track map from race studio to the mychron.
Hi derek,nice video and very helpfull for mychron 5...you make a very great job...this sport needs more dereks😉😉😉 still i hope for more videos for dd2...inst. of rear axle,inst of complete clutch and gear system and more....thanks for your great job...sorry for my switzerlandenglisch...🤣🤣🤣🤣🤣patrizio from zurich...
Hey Patrizio, thanks mate. we will have to wait for the DD2 video's until a customer brings on in for a service. we haven't got a DD2 here to operate on yet..........
I have had my MyChrons 2T for 2 years, and today at training before a race tommorow my egt (exhaust temp) sensor stopped working. Then i bought a new exhaust temp at the track shop - and the new exhaust sensor worked for 1 practice but in the second practice it also stopped working. So i might have destroyed to exhaust sensors today.
Have anyone tried this or maybe i can reset the Laptimer?
that sucks, reset it anyways to see. also check the connection to the unit and at the sensor/extension lead junction
A bit of digging here but I don't have the split times/rolling lap/theoretical lap page, I have all the other ones though. Any reason for that?
Beacon mode set to Automatic and I only use GPS for the lap time.
I have seen that before. Someone told me that was a software update. But does your track have splits built into it/have you seen split times on other peoples dashes at your track??
@@PowerRepublic My bad, indeed now that I've checked in Race Studio, the splits have been deleted....
Hi! Can i ask you something? my mychron 5 generates 14 partials for me when I download it to the computer (depending on direction changes). I try to do 4 partials but I don't know how to achieve it. is it made from "master map"? it always makes me 14 partials. But i think there are many partials.
click the button in Maps that says 'clear all'. then you can 'divide' the track into how many sections you like.
Just upgraded from the 4 to the 5 this week actually. What mount are you using to mount the 5 to the 2019 tony kart
Garret Britton we use the OTK Mount mostly. DPE kart superstores have a cool new stainless steel one as well now.
Hi there, can you tell me if the LCU connects direct to the expansion hub? ( pic on mychron site shows LCU attached to data hub and data hub then attended to expansion hub)
LCU one plugs stright into the mychron 5 head unit. or you can buy the expansion hub and plug it into that as well.
Hi guy's i have an mychron 5s and my speedometer don work, do you know how to fix it? Do i need to buy a special cable for it or something
you need to select it in the menu setting to be displayed on your dash. otherwise maybe check to see if your firmware needs an update?
I have the dd2 rotax so I need to use the clutch or gearbox option ?
yeah and make it set to 2 gears
@@PowerRepublic and how much RPM do I put on the leds of the first and 2nd gear to know that it is showing me the RPM of the changes correctly
Thanks for the video, would you got for the mychron over the alfano?
still the Mychron really is the go to. I haven't used the Alfano software enough to tell you. but the units themselves are almost identical
Hi, for a Cadet kart (mini rok), which of the data loggers do you prefer and recommend - eg, MyChron5s, Alfano 6 etc?
Mychron 5s for me
I use a honda cadet and i got a mychron 5 2t and it works great.
Hi, I am about to buy a Mychron 5 with Lambda lcu one, do you know if it is possible to configure the led bar for Lambda values? Effectively using it like a tuning light set?
Andrew Farlow not that I’m aware of. You can read the numbers pretty easy on the fly.
@@PowerRepublic yeah ok that's cool thanks mate
SAndrew Farlow did you do any further research to se if it possible to run the light as a way of displaying a/f ?
@@kevinhunt8863 no I have not my unit has not arrived yet but I will have a look when I get it
Andrew Farlow please keep us in the loop
Hello power republic,
I just started go karting and I have a mychron 5. I also have a temp sensor (for the cylinder head) but I can’t see the temperature on the screen. I made a custom display setup where I should be abele to see the temperature but it is not showing up. Do I need to set the sensor up somewhere or what am I doing wrong. I hope you can help me.
I love your videos I have learnt a lot of them.
Hi Maxim, thanks for the positive vibes! make sure you turn off the the first 2 factory setting 'non custom' display settings. otherwise I think the factory settings over rule your custom 1 page. home that helps
Power Republic
I think I turned those off but I will double check next week when I’m back on the track.
Thanks for helping😁👍
Hi there I have a question....
I am from New Zealand and race in the rotax max light division I am moving to the Gold Coast and I am wondering my racing gear (suit helmet gloves ect ) that is legal in New Zealand will that be all legal in Australia and is my kart legal aswell or is there different rules ?
yeah that should be fine as we use the same Level 2 CIK as you guys.
Thanks thanks thanks so so so much 🙏👍
Your very welcome Silvana. Hows the DD2 going?
Power Republic
Hi, DD2 going very well! Getting faster and faster with a lower gear ratio, I used to drive with a 35-62, now I’m driving with a 34-63, and managed to go half a second faster with the 140cc cylinder. Yesterday I bought a Mychron 5, second hand for 250 euros (brand new is 500 euros,) so I’m happy 😃 that’s why I was watching your video on the Mychron 5 , so thank you so so much! 👍
@@p.c.h.6721 Thats awesome. when we get our DD2 running we will be using the 36-61 gears for 130 kph max speed
is Eastern Creek in it?
sure is
Temperature sensor is same for MyChron3 ?
yeah, the sensors are unchanged
I have just got a Mychron 5 s . Unlike my 4 it does not automatically turn on. Is it in the settings?
nah it should turn on by itself when the engine starts. you have to have the RPM lead on but
@@PowerRepublic Still nothing. Have contacted Mychron but no reply. Will ring them again tomorrow.
I have reset it as per your video and will try try tomorrow morning. Thanks mate.
how do you charge the battery
Hello Derek, how can i adjust starting line, sector splits of the track on MyChron?
I think you can do it in the Race Studio software in post analysis.
@@PowerRepublic I see, i'll give it a try. Thank you.
@@楊承憲-k8k 😎
I have a 7 speed shifter kart what should I do
mmm, good problem to have. but not sure on that. what type of engine is it?
How rolling time is calculated?
Best rolling lap? That’s the best sectors from any 2 consecutive i.e sector 2 , 3 then 1 from the next lap to make a best lap time
@@PowerRepublic I got it! Thanks!
Is there a fitting video for one of those??
I don't have one, but it is literally one nut on the back of the unit and then run the RPM lead to the tack wire.
@@PowerRepublic thanks
Hi I am a race and I am in ka4 what should I be reving
Hey Will, about 13500 rpm at most flat circuits. they will over rev if the main straight is down hill
@@PowerRepublic ok thanks
kan man bruge det til en 4 sylen motor
yeah
Probably outdated but would this work on a race boat
Yeah it might. But AIM sports have more high end loggers for 4 stroke race engines. Check out their website for details
www.aimsportsystems.com.au/en/products-all.html
Thanks but we run 2 strokes
@@samtaylor4684 sweet as, should work no problems
Would it work with a 3 cylinder though
@@samtaylor4684 shouldn't be a problem, they take the RPM signal off HT lead.
How can I see my best theoretical lap ....My Mychron isnt showing it
from the home screen you need to press the 'mem' button 4 times and that should bring up the split times/rolling lap/theoretical lap page. let me know how that goes for you?
@@PowerRepublic Im seeing everything but a theoretical best lap , maybe it has to do with the display layout settings ...Im not sure .... And on Race Studio 3 , Do you know how I can get them
@Zox453 thanks for the hot tip
Probably out dated but a video on the 4 would be awesome
Abel Fuentes the great thing about the Mychron is that each new edition builds on the previous model. The only major difference for the 4 is with the GPS being an add too, not integrated. All the button are similar with almost the same functions. And to download on the 4 you have to get a data key and save you files on it, then plug the data key into your lap top and then use race studio for analysis. Hope that helps.
Thanks for the videoes but please buy a lapel microphone :-)
yeah sorry about the audio on some of the older vid's. rookie mistake
Any feature that only works when the track is recognized should be disregarded as a feature since there will always be tracks that aren't in there and the the percentage of unrecognized tracks will increase over the years.
We brits use mph not km/hr.
I forgot, apologies my friend.
How would you charge it? my battery is out now and I dont know what to do besides having the kart on