How To Change A 2014 - 2021 Jeep Grand Cherokee Cabin Air Filter - Remove Replace Location
Вставка
- Опубліковано 31 лип 2024
- A video tutorial on how to remove and replace the cabin air filter on a 2014 - 2021 Jeep Grand Cherokee.
WHAT IS THE CABIN AIR FILTER ON YOUR JEEP GRAND CHEROKEE?
Cabin air filters, also know as A/C air filter, help enhance the air quality inside your vehicle creating a healthier, more comfortable environment for you and your passengers. A properly functioning cabin air filter, or ac air filter, can stop up to 90% of dust, pollen, and spore particles from entering the Jeep Grand Cherokee passenger compartment location.
WHEN SHOULD YOU CHANGE THE CABIN AIR FILTER ON YOUR JEEP GRAND CHEROKEE?
It is recommended that you replace your cabin air filter every 10,000 - 15,000 miles or once a year. However, you may want to replace or change the cabin filter in you Grand Cherokee more often if:
-You or a frequent passenger suffers from allergies or has other respiratory problems
-You drive your Grand Cherokee on dirt roads or in an excessively dusty location
WHERE IS THE CABIN FILTER LOCATION ON YOUR JEEP GRAND CHEROKEE?
The cabin filter is located behind the glovebox. The glove box and cabin filter access door will need to be removed in order to gain access to the cabin air filter.
This video tutorial can be used to help find the location of as well as remove, change or replace the cabin AC air filter on the following Jeep Models:
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee - Авто та транспорт
One of the best tutorials I've ever viewed. Well done!
Thank You!
Had my filter changed at the dealership yesterday. Drove today, and noticed a whistle with the AC on. Was ready to take it back to the dealership when I found your video. They had not fully seated the new filter. Saved me time and aggravation. Thanks.
You're Welcome! Glad it helped
Easy to follow and to the point, without a lot of annoying background music. Thanks for this.
You're welcome!
Amazing tutorial!! You need to be hired to give tutorials on all product, past present and future!
Thank You!!
What a perfect video - thanks PYR - so well paced and easy to folloe
Thanks! Glad it helped
Excellent tutorial, Thank you for the lesson.
You're welcome!
This one helped me the most . I'm a woman and I feel accomplished I was able to change my own cabin filter .
Glad it helped!
Great video 👍
Thanks!
Very helpful and thanks
You're Welcome!
Very helpful
Glad it helped!
Very informative
Thanks!
Thanks for the assist!
You're welcome!
You just saved me tons of money..I have seeds and corn in my garage for the animals
..the chipmunks got into it and stored about a pound of it in my air conditioner filter.. I tried to vaccum it out BUT can't get it all.. I couldn't figure out how to get the glove box out!!! Thank u sooooo much!!
You're welcome! Glad it helped
Thanks. Very helpful. The manual in my 2021 doesn’t even mention the cabin air filter.
You're welcome! Glad it helped
I found it to be a bit more difficult to remove the glove box due to the two protrusions on each side being quite large. I had to use a pry bar to get my box out. I also used a sting to loop around the glove box return, which made it much easier to hook it back up to the side.
yes - the video shows the man simply gently pushing in on the sides with his fingertips - I had to put a lot of English on it to push the sides in on our 2020 - dunno if they changed the tabs at some point and made them longer in more recent model years?
The filter slot cover was tougher too - I had to take a small flat head screwdriver and push UP on the center tab to get it to release.
Finally, I used a small pair of needle-nose vise grips to hold the string dampener while I reinstalled the glovebox door.
Everything worked as shown except for the glove box reinstall. The plastic trim (from dash to floor) on the right side of box interferes with the sliding the right hinge track into place, so every time (several) I reinstalled it, it was misaligned and either would not close or would drag. I could feel that the right (and middle) were not fully engaged as they should be. I tried prying and hammering it downward to force it into place. Finally, I partially closed the glove box and put most of my weight on the right side and it popped into place. I watched several videos to see if anyone showed and alignment trick I was missing, but nothing addressed this issue. Felt like a poor design choice by Jeep. Anyway, it's back in and I didn't break it (although that was an option I considered), so good now. Anyone else have this issue?
The down arrows on the OEM filters don’t show airflow, so be careful. Airflow To be sure look at the dirty side of the old filter and that’s the in side.
that's true - if the filter does not say "airflow" and only has an arrow then they would typically be installed with the arrow pointing up. If filter says "air" or "airflow" then it should point down.
Another video it says the airflow is coming from the bottom moving up? Which is the true direction of the airflow?
1:42
Dealer and Random Oil change place wants $90-100 for that service :)
We charge 50$ at my lube shop
The quick lube I work at charges 24.99 for a new filter installed and ppl still bitch
Yes, ridiculous amount. I have rheumatoid arthritis, but I can do it!
Like how much pressure to press those sides together?
it can take a good amount of pressure
A lot - had to use a pry bar on mine - hoped it would not break the box
👍🏼
👍🏼