Machine! At 1:28 You mentioned you're not familiar with the IR head, so I'll throw in my experience I use the Xtool F1, when I'm doing these types of mugs I'll blast my design at 100% power on the 10w laser, then go back over with the IR that makes the engraving super shiny
Machine! Another great video sir…I’ve got my first laser ordered and coming in June so we’ll see how I do as well…like the chuck set up. I went with the PiBurn 4.0 so we’ll see how it stacks up against the other rotors.
MACHINE! Thanks for being specific about your settings. It really helps to have a tested starting place! For the same reason, jigs make my MACHINE easier to repeat because I can screw up the simplest set up.. Great video!
Machine! I really need to try out my RA2....Love your videos btw, your tutorials are honestly some of the easiest to understand on UA-cam. In xcs, you can "combine" no group, but combine items and it will engrave a bit faster.
Love the end product, Laser engraving looks interesting, I can see almost endless possibilities, would love to try it. Adam has an excellent channel. Can almost call him a neighbor, We're in the same county.
Machine! (Wrote this while falling down 😎) Could you use the laser to align the rotary? Place it on a corner the slide left or right to other corner and move rotary accordingly?
Machine , really love your content I just installed my casters that you have on your crossfire pro on my new crossfire pro thanks for all the good info on this table
Machine is the word! Thanks to Spicer Design, I think of you every time I hear machine!😅😂 Once you get this dialed in, I will need a @tractorrookie tumbler. Cheers brother!
works been busy but trying to catch back up on your vids ! great to see you using your "Machine" to do more cool projects , i still haven't gotten my wife to try any tumblers on her p2 yet
There are some great tips in this video thank you. Have a look at the RA 2 Pro Accessory kit it is a game changer add on for the RA 2 pro. Also to avoid hitting the chuck try putting the jaws on the inside of the tumbler.
Thanks! It all depends on what tumbler and how many. If you can buy a decent tumbler in bulk it would def help keep cost down. Some people are particular to their brands though.
Machine.Fantastic video 👏Can I ask what speed settings you were using when you were running at 100% power? I have the the S1 40w and I am running my machine at 100% power on tumblers with fantastic results 👍
I Highly recommend the XTool S1 laser: bit.ly/484Z9oa
Thank you so much for the shout out! I appreciate your support! 🤗
No problem! Glad to help
That's a nice MACHINE right there. It's really cool how modular the S1 is to be able to use things like the RA2.
Machine! At 1:28 You mentioned you're not familiar with the IR head, so I'll throw in my experience
I use the Xtool F1, when I'm doing these types of mugs I'll blast my design at 100% power on the 10w laser, then go back over with the IR that makes the engraving super shiny
Ahhh thanks for the info
Machine! Another great video sir…I’ve got my first laser ordered and coming in June so we’ll see how I do as well…like the chuck set up. I went with the PiBurn 4.0 so we’ll see how it stacks up against the other rotors.
Nice! Good luck with the new machine.
Thanks. Just purchase the D1 Pro 20w and the RA 2. Wanted the settings for engraving a tumbler. Perfect. Thanks for posting this.
We use a magic eraser to clean them up, works great. The Xtool definitely looks like a nice laser.
Good idea. Ill have to try that
Machine, Spicer designs and hometown acres are 2 of the best channels!
Thanks Kyle!
Machine, that's it! I found you because of the Kioti tractor and now a lot of good machining work! One of my favorite channels on YT!
Wow, thanks! Glad to have you
Machine! Follower from Hometown Acres.
Thank you! Adam has a great channel
Another top notch video appreciate the channels drops great networking
Thank you. And yes those are both great channels.
Machine, Are you still happy about the smaller excavator purchase? Great video again
Ya its been a nice machine. Just been getting a ton of rain and cant get out there and use them.
I didn’t know power at such a low setting would work. Going to have to try your settings. MACHINE!
That looks like quite the Machine! Laser will be the next Machine in my shop someday.
Great video Machine, Spicer designs, very creative Machine logo
Thank you! Im happy with how it came out.
MACHINE! Thanks for being specific about your settings. It really helps to have a tested starting place! For the same reason, jigs make my MACHINE easier to repeat because I can screw up the simplest set up.. Great video!
Machine! I really need to try out my RA2....Love your videos btw, your tutorials are honestly some of the easiest to understand on UA-cam. In xcs, you can "combine" no group, but combine items and it will engrave a bit faster.
Machine!!! Thanks for the S1 update and video!
MACHINE! Always look forward to every Saturday morning and a new video from you!
Thanks Dave! Glad you enjoy them. I have some good ones coming.
Very cool! Will it engrave Dewalt tumblers too?
Sure. Whatever you want
Love your channel and you content as well as your humor!!! Machine.
Thanks John! I appreciate that. Ive got some good stuff coming
Machine!!! Awesome video. Continue to look forward to my down time to watch your videos on Sunday evenings…
MACHINE.. Love your content!
Thanks! Glad to hear that.
Nice work getting the Machine dialed in!! I definitely like the concept of the 3 jaw chuck better than the roller setup.
I agree!
MACHINE!!! Great video!! I’ve been wanting to try my S1 rotary tool but I was scared to death of it! Not anymore!! Thank you!
Glad i could help out. Its super easy
Good stuff Kyle. Keep em coming. You should do a logo for the keystone girl too. Oh and Machine :)
Thanks Matt. Ya thats a good idea
MACHINE!!! This engraving process is pretty darn cool. Great stuff!
Its really is. Pretty impressive machine for a homeowner to have.
Awesome job. I have thought about getting into laser/cnc as a side hustle.
There plenty of money to be made. Especially locally. Sports, school, clubs, businesses, ect.
MACHINE. Spicer design for the win.
That is such a cool little machine, MACHINE. Nice to see your subs creeping up! You were at 17K when I first watched, keep up the great content.
Thanks! Will do!
MACHINE!! Love my laser MACHINE and about to get a CNC Plasma Table MACHINE. Thanks for your content, you are a MACHINE.
Excellent easy to understand video, well done
MACHINE! Started watching your channel for the langmuir videos. Now i watch them all
Thats awesome, i appreciate it. I have some good ones coming up
Can you do a DeWalt tumbler? Maybe have “keystone girl” on there too!
I could. Whatever you want buddy
MACHINE!
Great video, as usual. You are a talented dude.
Thanks Dave! I appreciate that
Love the end product, Laser engraving looks interesting, I can see almost endless possibilities, would love to try it. Adam has an excellent channel. Can almost call him a neighbor, We're in the same county.
Love your channel. I also watch Hometown Acres. Great stuff, both.
Thank You...MACHINE! MACHINE!! MACHINE!!
Ya hes ok.
MACHINE! "Dammit, I think I pulled a groin muscle!" Did not know using scrubber pad would work that well on clean up. Well done!
Machine! (Wrote this while falling down 😎)
Could you use the laser to align the rotary? Place it on a corner the slide left or right to other corner and move rotary accordingly?
Im not completely following. But a lot of people make a jig that will hold the rotary tool square to the laser. Hoping to do that soon.
Awesome tool, great MACHINE.
Great Job, you are very easy to understand. Thanks, Ed
Machine , really love your content I just installed my casters that you have on your crossfire pro on my new crossfire pro thanks for all the good info on this table
No problem buddy! Glad your enjoying the channel. Im hoping to upgrade to the XR one day
Machine!! Cool tumbler and a great video.
MACHINE, Great video I've been eyeing up laser engravers. Thanks for the information 👍
Machine is the word! Thanks to Spicer Design, I think of you every time I hear machine!😅😂 Once you get this dialed in, I will need a @tractorrookie tumbler. Cheers brother!
I can do that for you. Just email me and ill whip one up for you.
Is that a MacBook Pro or air? If it’s a new air m2 or m3 you should upgrade to the 15 screen for that type
Of work
Its an air. I believe it has the m2. Not familiar with the screen your talking about though
Kyle, please make some stickers with the Machine logo. I'd love to buy a few for my toolbox, etc
I definitely plan on doing that. I will give an update when i have them ready. Thanks!
Machine! I am working on creating a similar setup in my garage!
MACHINE. Watching you from Canada.
Love your channel. Good job.👍
Cool video! Looks great! Thanks for sharing! Machine!
Machine, you should always keep it lubed, great video always fun to watch!
Thank you! I try to keep them as entertaining as possible.
Machine, Spicer design for the win
MACHINE. Love the videos on everything, keep up the work 👍🏻
Thanks Ryan!
Machine 😅. Well that’s good that Thunder Laser took you seriously. Nice job on the engraving 👍
Machine. Is the tumbler over priced. Yes. But damn I sure do love the pack out system
Me too. Good stuff
Machine! Love the channel
Thank you!
works been busy but trying to catch back up on your vids ! great to see you using your "Machine" to do more cool projects , i still haven't gotten my wife to try any tumblers on her p2 yet
The rotary tool is pretty cool. I did try on the p2. It was a bit more challenging with the layout. Just have to get used to it i guess.
MACHINE, love the videos
Looked nice and crisp.
MACHINE! - Thanks for the review. I’ve been trying to decide between the P2 and S1. This video helped. Thx.
MACHINE!! Thanks for the great video
Machine! Thanks for the laughs Kyle!
Machine!!! Looks awesome!
Machine. Love the videos
Thank you!
Machine, have the P2 but still figuring things out and haven't tried lasering tumblers yet.
I'm going to have to grab an S1 laser engraving machine [MACHINE!] and burn some stuff, not that anyone cares. Well done Kyle!!
Hah! I care my freind
Awesome! Thanks for sharing. Machine
There are some great tips in this video thank you. Have a look at the RA 2 Pro Accessory kit it is a game changer add on for the RA 2 pro. Also to avoid hitting the chuck try putting the jaws on the inside of the tumbler.
Ahh good idea.
Machine! Keep up the great content.
Machine.
Have you thought about what you’d charge to custom engrave a tumbler?
Good job.
Thanks! It all depends on what tumbler and how many. If you can buy a decent tumbler in bulk it would def help keep cost down. Some people are particular to their brands though.
Oh Yeah !!! My favorite channel !
Wow thanks!
MACHINE !
Welcome back to the channel🫵
Hah! Nice
How do you like that MacBook Air? M2 chip? How much ram?
I like it. Its done everything i need it to do. It does have the m2 chip. Not sure on the ram.
Machine. Love the vids - keep em coming
Thanks buddy
Just used your settings on a black Tal tumbler. Nice and perfect setting! Any setting recommendations on a Stanley tumbler?
Havent tried a Stanley. Those settings should get you close though. Those coatings are all pretty similar.
@@SpicerDesignsLLC I guess I should of added settings for lighter colors. I understand that lighter colors require higher power.
Looks awesome! Good info!
MACHINE! Always look forward to your content. Dammit🤣
Thanks buddy! Ive got some good stuff coming.
Machine. That is an awesome machine.
Machine! We love your videos!!
Thanks! Glad you like them
Machine! I look forward to Saturday morning Spicer Designs videos. I wish we got more than one per week.
Thanks Dan! I try. I should have a couple twofers coming up. This rain is killing my momentum right now.
@SpicerDesignsLLC Man, don't I know it! I'm in Texas, and we've been getting hammered by rain the last few weeks. Lots of flooding.
@Dan.A. I watch a couple channels from Texas and they have been showing some insane storms and flooding. Stay safe!
Machine keep up the good videos we love them.
Machine!!! Love your videos keep up the good work!
Thanks! Will do!
Machine! Great video and great channel!
Thank you
Machine, Machine. Nice tool!
MACHINE
And I love the channel!
Thanks! Much appreciated
MACHINE! Good job on "managing" Thunderlaser! It really SUCKS when someone tries to steal your good work! TAKE NO S#!T !!
Awesome job!!
Thanks! So helpful!
Machine! Great video as always.
impressed by S1
Machine ... a very cool tool 👍
Top notch video once again. I always look forward to your content. That S1 is a nice Machine! That tumbler came out looking t!t5.
Thanks buddy!
Machine, Damnit, I just tripped!
Hah! Me too
Machine! And…happy machining and stuff! Yea buddy - trademark your goodies!
Machine! Thanks Kyle!
Machine, nice idea, could be a nice side business.
Machine. That’s a really cool machine.
Machine.Fantastic video 👏Can I ask what speed settings you were using when you were running at 100% power? I have the the S1 40w and I am running my machine at 100% power on tumblers with fantastic results 👍
Mmh, im surprised. I must have been running too slow. I dont remember what the speed was.
The only thing you have to watch for is the over travel at that speed so it doesn’t hit the chuck teeth
Machine - Nice work
Cool Machine. So with all the add-ons, about $4k-$5k for everything, before discounts?
Probably pushing $4000 for sure. Not cheap but it can be a money maker.