Multiple very weird choises done here. I would personally used a knife to make the openings for the solder point, drill a hole and make a channel on the underside for the connector. I would also have rounded or routered a more interesting design for the wood and frosted the plexi, making a negative icon. Another note, this could be built upon the have multiple plexi panels, rgb LED's. I'm thinking having 1 plexi with red led, and one with blue. having the sith empire and the republic icons for the ones. Good video tough, it has inspired me :D
Для акрилайта лучше взять толщину материала побольше, от 3-4 мм и больше, иначе нижний край будет ярким возле светодиодов, а верх будет светиться слабо, особенно если светящаяся часть пластика имеет фигурный край а не просто прямоугольник. А так хорошо получилось, новых идей автору и лайк :-)
This looks beautiful 👍
Very Beautiful job!! Very Compliment!!!
Thanx ;-)
Awesome idea
nice work !
Thanks :)
excellent jobs
I have made This to at Home and its very Nice . Thanks
Thanks!
Great video!👍🏼
Thank you
Multiple very weird choises done here. I would personally used a knife to make the openings for the solder point, drill a hole and make a channel on the underside for the connector. I would also have rounded or routered a more interesting design for the wood and frosted the plexi, making a negative icon. Another note, this could be built upon the have multiple plexi panels, rgb LED's. I'm thinking having 1 plexi with red led, and one with blue. having the sith empire and the republic icons for the ones.
Good video tough, it has inspired me :D
:-)
Для акрилайта лучше взять толщину материала побольше, от 3-4 мм и больше, иначе нижний край будет ярким возле светодиодов, а верх будет светиться слабо, особенно если светящаяся часть пластика имеет фигурный край а не просто прямоугольник. А так хорошо получилось, новых идей автору и лайк :-)
Thx 4 comment!
How deep into the acrylic does the etching need to be?
Thanks, nice work
Thx!
good job mate
Thx!
Awesome!!!
Thx
thank u,
I laike it.
Hi. How thick is the acrylic glass that is best for signage?
Where can I find this acrylic?
What is the brand of the tool to sign? Like pen
brilliant!
Thx!
not rly
What is the LED strip hooked up to and how is connected to power. For example, switch button or?
any 12V DC power supply
Hey,may I know..why did u do use that nail device on that protective layer of other side of acrylic ?..can i directly use it on the acrylic..
Hi .... Design karne wali machine ka Kya naam h or kitne price ki h
May I know what is that grey film?
What is that driller?
sand the sides left and right and top NOT the lower part and the light will stay more in ...
Thanks for the advice
Arey you selling these kind of products
jo apke pass machin hai desinig karne bali uska keya name hai
What is the strip you are using on the base of the wood?
Hi, Strip ... Natural Color - Warm White light LED, no waterpfoof, Roll - 300 LED on 5 Meters
Handwerklich noch ausbaufähig🤔aber von der Idee gut....
Can I use simple glass at the place of acrylic plate?
Yes but you need Diamond Engraving tip to glass !
Smart Beast thanks
+DP Hacker thanks for comment ;-)
HADEURRRRRR if your too cheap to buy new materials should you really be making it?
May i know the full details of the materials used in making wooden led lamp
just fabricate what you see moron
Mashin name and price
what did you use glass or plastic?
are you dyslexic?
@@yuktabhardwaj7554 No need to be so rude. A simple answer or no response at all would have sufficed.
@Virtix It is done using Acrylic.
@@yuktabhardwaj7554 yeah man. Why you gotta be so rude
You don't specifically gave us the detail of the component such as acrylic dimension, the length of LED strip, and the dimension of those wood blocks
Mahdiar Naufal because it's an really basic
@@therainbowfish2785 bruh can't you see he's an indian
@@yuktabhardwaj7554 no he isnt...n wht u mean by Indian ?
U think Indians r fool....u ignorant pussy
@@yuktabhardwaj7554 HAHA EXACTLY
Bang mau nanya nihhhh beli lampunya dimana dan nama itu lampu apa yahhhh tolong di jawab:)
Dope
How can i buy? LED base
Which type mirror used?
Hi, mirror tape - tape resistant to high temperatures (used eg for fireplaces)
i made in my home this is bad but idea is best
it's acrylic thick 5 mm, isn't it ?
Yes, It's 3mm!
Aap mujhai ye bataye seesha kun sa hai
Saan po available mga materials?
Can I do this etching with glass
yes, your just need to use a utility knife
Como se llama lo que usas para grabar el acrílico
What are the things I need to build this?
step 1: watch the video dumbass
@@baratholomewpew7399 I'm asking you dumbass cuz I don't know what those things are
what measure is the acrylic ??
if you want to learn and practice use 3mm and after that use 6mm :)
Can i use knife instead of nail drill?
I think yes ..why not ..try this method!
@@SmartBeast thanks you
Hellow, Excuse me... whats the name of the adapters that go to the cables?
Any typical 12V led strip with controller and recieiver and a 12V 5A power supply. You can often find complete kits on Amazon
You're right - thanks.
GoldenAce57 thanks!!!!
Smart Beast and thanks for the great vidro aswell
what name of the drill tool?
Hi, No name. .. lmgtfy.com/?q=nail+pedicure+%20drill+machine+cheap
just use a dremel
Who invented this? This should be pantented cause vector lamps are getting popular now
What is machine you used
It's nail drilling machine!
Again me.. :)
Can you give us this drawing too please ? =)
Thanks !
:-) Go ahead!
drive.google.com/open?id=0B2q2NhTG1mf0R0dFM2diWm5PNzQ
make ur own fuckin drawing
What is the name of this glass
It is acrylic.
hey can u build my night light 4 me
Your work is amazing. i would like work with you. we also wooden and acrylic lamp manufacturer. are you interested?
Hey I'm interested
hey bitch answer ramirez hes interested
Led strips light
Make a template on a plotter and sandblast it.
Spill alat dan bahan nya bang
What is tha galss
U don't teach..u just show...why didn't u state the items use and what are u currently doing
Spill tools