Eemann Tech Upgrade Kit for Shadow 2 (ET-130052) installation
Вставка
- Опубліковано 27 чер 2021
- Eemann Tech Upgrade Kit for Shadow 2 (ET-130052) installation
The Eemann Tech Upgrade Kit is made for the most popular competition pistol in the world - CZ Shadow 2 and is used predominantly for IPSC, USPSA & any action sports.
All factory pistols are setup to pass stringent tests with a multitude of ammunition hence the heavy springs and factory parts.
The most popular pistol, the CZ Shadow 2 is already made for competition ready mode, but it’s always possible to improve the trigger group and other functions of your competition gun.
The upgrade kit ET-130052 has all the needed drop in parts to upgrade your pistol from the box to full competition mode, without any major changes required to your platform.
The Eemann Tech Competition springs reduce the weight of the trigger and slide reciprocating recoil making it more sensitive and faster for competition use.
The Eemann Tech Extended Firing Pin eliminates misfire problems with your gun, if you are reloading and using hard primers or customized very light main spring.
The Eemann Tech Competition Disconnector will ensure an ultra-short reset without any additional modifications to your gun.
Eemann Tech Upgrade Kit 44-130052 for CZ Shadow 2 contains:
• 44-131140 Eemann Tech Recoil Spring for CZ 10 lbs. - 1pc.
• 44-131118 Eemann Tech Main Spring for CZ 8 lbs. - 1pc.
• 44-131109 Eemann Tech Competition Trigger Spring for CZ 75 - 1pc.
• 44-131156 Eemann Tech Competition Firing Pin Spring for CZ - 1pc.
• 44-131113 Eemann Tech Competition Sear Spring for CZ 75 - 1pc.
• 44-130044 Eemann Tech Competition Disconnector for CZ - 1pc.
• 44-130015 Eemann Tech Extended Firing Pin for CZ - 1pc.
• 44-303017 Eemann Tech Competition Buffer for CZ 75 - 1pc.
• 44-130064 Eemann Tech Competition Trigger Pin for CZ - 1pc.
• 44-130055 Eemann Tech Hammer Strut Pin for CZ - 1pc.
Compatible with:
• CZ 75 SP-01 (without firing pin block models)
• CZ 75 Shadow Line
• CZ 75 SP-01 Shadow
• CZ 75 SP-01 Shadow Orange
• CZ Shadow 2
• CZ Shadow 2 Orange - Спорт
Excellent video Paul. Just did mine and this helped heaps.
Thank you, well detailed video, as well as a great kit. Installation took around an hour for a first timer (had no special tools and don't see them as extremely necessary). Packing it all up and straightaway to the range. :)
I always look forward to your video's.
I just purchased this exact kit can't wait to receive it so i can install it and give it a run !!!!
Just want to say thank you for the great video. I have watched a lot of trigger installs but this is one of the best. And I'm not even done with it yet!
Great video! Very educational for a rookie like myself. Well done!!👏👏👏
Great video, I built the kit into my Shadow 2 OR. SA from approx. 1500g to 1200g. Creeping has gotten better too.
I love your videos, they are extremely detailed and informative.
Thank you,
Take care,
Be safe
Just installed it and really excited to test. I let you know.
Was pretty easy to install! Greets....
thank you very much! good luck!!
I am very satisfied with this kit!
Installing wasn't a big deal with 4 hands.
OH! SO easy! Having tried some of this on other CZs, it isn't this easy the first time.
Once you've done it once or twice it does get easier
Grazie per la guida 🔝💪🏻
Really nice. Keep it up Sir
Great video! Followed the instructions, however I had too many firing failures. So, I put back the original hammer spring, firing pin and spring. Now it works. Trigger creeps a bit (2mm)... Ergo: if you just change the disconnector it works ok. The trigger spring can be kept as a replacement part...
Great Video, Thanks a lot.
Thanks Paul
I am definitely going to order that kit, and maybe the dovetail red dot mount too 👍
Sei un genio!!👍
Just installed on my Shadow 2 with an ultimate trigger. Stock DA of 9 lbs was reduced to 5.5 lbs and SA reduced from 3.5 lbs to 1.3 lbs. Ultimate trigger did not need the pre-travel screw. Very impressed so far.
Good luck on competitions!
@@dmitrieemann tested my upgrade Shadow 2 today. Tested with multiple ammo types. Worked flawlessly. Very satisfied Canadian customer. Looking forward to my upcoming IPSC match.
Did shorten the reset or do anything to the slight creep after the wall
@@saudalblaihed3925 once you set the set screws there is minimal initial and over travel.
I just installed on my brand new (2 weeks old/200 round count) Shadow 2. Stock DA was well over 9 lbs on the Wheeler trigger scale (it only goes to 9 lbs max on the calibration), I had to use a luggage scale & got 10.4 lbs. Stock SA was 3.4 lbs.
After install it now measures 6.4 lbs on DA & 2.4 lbs on SA. I am very happy, I can't wait to go to the range :)
My only concern is the longer firing ping is 2.517 vs my stock that measures 2.463. It might light up the round while slowly dropping the hammer after the load and make ready and lead to a DQ. None of my CGW firings pins exceeded 2.5. I will wait to see tomorrow when I go to the range.
Hey, did the range trip confirm your suspicions regarding the longer firing pin theory?
@@tinpea After many club and IPSC matches later, I am very happy to say it has never been an issue. DVC
Awesome video! I installed the kit today! Never done anything similar before..
I'm getting quite a few SA light strikes though (approx 1 in 10). I see the hammer spring is 8lbs. Do you suggest I get a 10lbs one?
Primers are well seated and I tried both Muron and S&B primers. Gun only has about 500 rounds through it.
Hi! Excellent video. I just want to ask, if it is similar procedure for the Upgrade Kit ET-130051 for the Shadow 1, thank you!
Where did you get that bullet punch from?
Thank you for the videos, it made my upgrades easy.
I can’t wait to hear the upgrades for the new shadow 2 compact. I’m assuming trigger and sear springs are the same as the shadow 2? The rest should be olmaga or sp01 stuff. I know the shadow 2 compact comes with a captured recoil spring which I definitely want to change to uncaptured.
Hi, I bought your upgrade kit for my Shadow 2. It works good, however I have one slight issue. I expected that SA trigger would be crisp 1911 style. But even with your upgrade, when I pull the trigger it has two walls.
Is it ok and I just expect too much or it just requires some additional fitting?
Please, let me know if it can be fitted to get crisp SA and if yes, then could you please point me to the instruction how to do it?
i was curious on how you can tell what weight your main springs are? i bought a 9 and a 10, they look exactly the same and they both feel heavier than the stock main spring.
Paul thank you so much, just completed my shadow 2 upgrade kit just have to wait till you guys get in the barrel :)
Will this work basically the same for SP-01 upgrade kit?
Loved this but could only find bid for main spring of SP-01. Ty
Where did you get the bullet punch from?
I can’t find one on Maui
Great video!
But why would I want to change the main spring?
Is there a kit for shadow 2 Single action only?
Can you still install the sear spring without the tool?
Just to be clear this will make the trigger pull lighter but make it not drop safe?
Hey there, the Trigger Pin is moving to one side of if I use the trigger. Do I have to degrease it or maybe loctite is the solution? Another issue after the first match is that the hammer isnt moving all way back to its rest position.
I just installed this and now I'm having trouble with the trigger. I'm unable to dry fire the pistol. The trigger and safety was working fine during reassemble when I checked it. The issue started as soon as the upper was added. The issue appears more problematic with single action. At times, 1 out of 20 I can get it to dry fire single action. From that point I can normally dry fire double action without an issue. I've noticed I can sometime dry fire single action by pulling the trigger back beyond the cocked hammer point.
Any assistance would be greatly appreciated. I should also mention I'm using the eeman tech straight DA/SA flat trigger. It has been installed for a couple of weeks and has been firing at the range without issue.
Dead trigger. The disconnector needs a little filing down where it hooks into trigger bar. Common issue when changing out disconnector.
where I can buy this upgrade kit?
👍
I got a Shadow 2 SAO and am wondering if this kit works for it?
Great video as usual!
However after install the upgrade kit, sometimes I will have light strike issue, is it because the main spring too light????
yes, on some pistols you need to try heavier main spring
Or change ammo if possible with softer primers.
@@EemannTech
I'm having this issues too. Which one would you recommend?
@@StephanBieker depends on primers and type of reloading. Try to use next step power main spring 9 lbs
Hi Paul, are you in WA.
I have successfully installed the kit but now my Shadow 2 has misfire and ejection issues with standard ammo. What went wrong?
That’s quite normal with standard ammo. If you upgrade your springs to lighter ones, you normally end up reloading your own ammo to suit your new gun needs
Can you please help me, I’m having problems installing the sear cage in and the safety will not line up
when you trying to install safety, if its not fit till the end, just push on left detent to rear side and safety will seat on the place...
@@dmitrieemann thank you for your response, when I install the pin
pin , that’s where the sear cage doesn’t go forward and don’t know why it won’t
The pin holding the disconnector to the hammer, Ive legit Ruined 2 separate punch pin sets trying to whack that factory pin out. im stuck with my install until i can get it out. ive got a punch block and everything it just legit Will not fucking move. any advice?
scusami ho smontato la mia shadow 2 seguendo il tuo video ed è andato tutto ok, quando ho messo il carrello con la canna e l'asta guida molla, il carrello non arriva fino alla fine perchè? Arriva dopo la metà
do you have the slide stop well mounted?
I just installed this set in mine and now the trigger pull is not even 1 kilo!!!! Effed up! What to do? I need it to be 1360gr still.
ipscstore have a +10% trigger return spring, try that one.
Fikk du riktig avtrekksvekt til slutt eller ble den for lett også med +10% ??
Where can I buy this kit in Canada?
Check the CANADA www.eemann-tech.com/dealers/
Hardball ballistic carry this spring kit.
I'm in the USA...Where can I order this Kit??
Dot 40
Hard ball ballistics
Is the kit production legal?
Yes, all parts are allowed by ipsc rules in production or production optics divisions
@@dmitrieemann thanks for your quick reply. Will order one kit now ;)
It is legal to change your springs BUT based on the single action results (2.11 lbs) this kit may not be legal, no?
For Production, isn’t the minimum trigger pull 1.36kg (3lbs)?
@@IgorRguez The pull should be EITHER 3lbs at BOTH single and double action, OR 5lbs at double action. With the latter, there is no minimum trigger pull in single action.
As long as your double action is 5lbs+ you're good to go 🙂
This is as per "IPSC Handgun Competition Rules - Jan 2019 Edition - Final 30 Dec 2018 (New address)"
When are you located guys
Estonia
Won’t this just cause misfires. I like the reliability of the gun but would enjoy a lighter da pull.
I guess My question would be buying a $1000. dollar gun, with a 10lb trigger pull from the factory in the first place ?
I think a stock gun designed for production competition/entry level users is probably designed to shoot off the shelf ammo. Harder primers. If you read down they talk about light strikes and reloading or buying competition specific ammo with softer primers. Heavier springs are more reliable to function. This tuning seems like its for advanced shooters, ready to take those extra steps.
It's 10lbs in double action. Single action is 3-4lbs
if only all guns had 1 pound trigger and no more than 2.
Do you have upgrade for cz shadow 2 compact?
Hard at first, but really easy, but what a freaking difference Dam. Smooth as butter, Dam