VE / VF Commodore V6 Oil Change - LLT / LFX / LY7 - AutoInstruct

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • In this tutorial we'll show you how to change the oil in your VE Commodore, VF Commodore or Chevrolet Camaro, all of which share either the LLT, LY7 or LFX Engines.
    ------------------------
    More tutorials can be found at www.autoinstruc...
    Shop Online: www.autoinstruc...
    Like us on Facebook: / autoinstruct
    Follow us on Instagram: / autoinstruct

КОМЕНТАРІ • 102

  • @saoriley
    @saoriley 6 років тому +9

    Thanks for putting up this video. I had a VX previously for which it was really easy to change the oil and filter. I just bought a VF and really had no idea where the filter nor sump plug were..... your video helps a lot. Thanks again.

  • @kunaalmani1113
    @kunaalmani1113 5 місяців тому +4

    Good Shit. This is the type of content we all need

  • @doomslayermax
    @doomslayermax 4 роки тому +4

    Legend thanks mate, came from a vt to ve and was excited that they moved where the oil filter was no more pain

  • @Vulkanprimarch
    @Vulkanprimarch 2 місяці тому +1

    This video saved me a lot of hassle. Thank you so much!

  • @therandomguy332
    @therandomguy332 5 років тому +6

    Just did my oil change on my VE SV6 Great guide, thanks for your help.

  • @waynestevenson9636
    @waynestevenson9636 2 місяці тому +2

    I literally just payed $280 to get my vf serviced.... might just do it myself from now on

  • @donwilliams6033
    @donwilliams6033 6 років тому +5

    Thank you so much for putting this on UA-cam.

  • @marty6980
    @marty6980 5 років тому +5

    Very informative. Keeping it simple and easy to follow. Cheers mate!

  • @holdenvkv8ify
    @holdenvkv8ify 6 років тому +3

    Thank you, a very different filter and location compared to my vk commodore

  • @garryibbetson9912
    @garryibbetson9912 5 місяців тому

    got my 13mm 15mm 24mm thank you took me no time thanks to this video

  • @GERRARD9292
    @GERRARD9292 8 років тому +8

    very good! thx mate!! I have a SV6 ..

  • @saturnthunder
    @saturnthunder 6 років тому +3

    Thanks for uploading your video.It was clear and relaxed so easy to understand.

  • @SimonM5
    @SimonM5 13 днів тому

    Thanks for you video, very helpful 👍

  • @YoungGun.
    @YoungGun. 4 роки тому +4

    Great video. I needed to know what size sockets too use and you sorted me out. Thanks.

  • @filipgurcinovski319
    @filipgurcinovski319 8 років тому +4

    Very helpful video, thank you, keep up the good work

  • @jaimesscattini4525
    @jaimesscattini4525 6 років тому +5

    You should always remove oil cartridge first allowing the vacuum to drain oil from filter housing...

  • @davidfinn5029
    @davidfinn5029 3 роки тому +5

    Tip... turn the oil container 90 degrees and pour. No glugs easy pour. Lot less mess

  • @bill-gray
    @bill-gray Рік тому +1

    Very helpful video. Well done 😊

  • @trulymeparker
    @trulymeparker 7 років тому +1

    You are so nice I think I'd even let you do my truck's oil.

  • @markusslesmale2819
    @markusslesmale2819 5 років тому +4

    Good video mate, but? Before you or anyone starts an oil change, they first need add some engine flush, then run the car for 30-60 minutes before you/they drain the engine oil.
    You also left out how to reset the "Service" due warning indication on the dash. After you finish the service you should Reset the Service Warning on the dash before you take it for a test drive. Hope this helps.

  • @JT-fn4eu
    @JT-fn4eu 4 роки тому +1

    Perfect information bro thanks very much . 👍

  • @RobHealey
    @RobHealey 2 роки тому +1

    Useful video, quick, clear and precise, thank you. Have just changed the oil filter following this vid

  • @priseene
    @priseene 4 місяці тому

    Thanks Champ!!
    💯

  • @almarei646
    @almarei646 2 роки тому +1

    Thankyou

  • @NagaSadowExarKun
    @NagaSadowExarKun 3 роки тому

    I recommend that you buy filter with replacement o ring and replace blue o ring on cap

  • @nicholasangel777sgt8
    @nicholasangel777sgt8 Рік тому

    Replacing that o ring is a must just leaving it is welcoming trouble

  • @pauljcampbell2997
    @pauljcampbell2997 3 роки тому

    Thank you very much for this video. Very helpful!

  • @RajHidesHere
    @RajHidesHere Рік тому

    Great video mate! 10/10.

  • @johnthorn923
    @johnthorn923 10 місяців тому

    Turn your oil container 180degs and it will pour much better, no glug.

  • @MelodyMan69
    @MelodyMan69 Рік тому

    Hot Oil drains better and removes all containments. Yes it can burn. Never needed a breaker bar, doing so just overtightens on its that only need a 'nip' to tighten. Also suggest a MAGNET stuck on the pan near the sump plug to hold fine particles.

    • @MelodyMan69
      @MelodyMan69 Рік тому

      Turn the conyainer SIDEWAYS when full to stop oil glugging out...

  • @D800Lover
    @D800Lover 9 місяців тому +1

    I have a question: My Commodore SV6 VF, I replaced the oil using Nulon Dexos and Ryco oil filter twelve months ago.
    In that time I have done less than 5000Km. When should I replace the oil?
    Should I do it because twelve months have passed in spite of low year kilometers? Or should I wait until the car has done more kilometers, and if so, how many?
    Very interested in comments.

  • @danielmckinnon4644
    @danielmckinnon4644 3 роки тому

    Thank you mate

  • @joshd7773
    @joshd7773 7 років тому +1

    You seem to do a better job than Holden dose got my Ve thunder back from my capped servicing and a week later no oil in it Holden says it must be my car leaking. As I am a mechanic and know it's not leaking but what hp or kw u get with ur intake and exhaust? Getting mine dynoed next week

    • @AutoInstruct
      @AutoInstruct  7 років тому +1

      Josh D they probably didn't fill it properly! We never had our car dyno'd so not sure. I've seen 140-150rwkw from other people.

  • @freshdjamit83
    @freshdjamit83 4 роки тому

    Nice video thanks

  • @danielferrari8849
    @danielferrari8849 Рік тому

    Thankyou 👍

  • @mahfa7513
    @mahfa7513 5 років тому

    Thanks for very good

  • @gordondunn3694
    @gordondunn3694 4 роки тому

    Thanks bro Do you find the Grella the works extra power!!?? of been looking at buying one not sure due to y

  • @OffGridInvestor
    @OffGridInvestor 4 роки тому +1

    Wait for the car to COOL DOWN. What are you serious? Everyone does it hot to help it flow out better. And usually not jacked up. I use a pothole to get under vehicles 9 months of the year and suck it up and do it on concrete during winter. Btw haven't you heard of holding the oil side on to stop glugging??

  • @harleydanger123
    @harleydanger123 3 роки тому +1

    Turn the oil jug sideways to avoid the glug.

    • @OnlyTKBeatz
      @OnlyTKBeatz 2 роки тому

      This comment is underrated thank you

  • @stewartstevenson6280
    @stewartstevenson6280 Рік тому

    ok I think you forgot to mention that you should have the car on stands not supported by a jack only you should have on gloves on and the oil filter comes with a new o ring that should always be used

  • @twisted3761
    @twisted3761 Рік тому

    What length breaker bar are you using?

  • @ianhawkins9621
    @ianhawkins9621 2 місяці тому

    Replace o rings both

  • @THEMOFFATTMAN
    @THEMOFFATTMAN Рік тому

    What trolley jack you using mate

  • @michealtran3636
    @michealtran3636 5 років тому

    Thank you

  • @DeeAloua
    @DeeAloua Рік тому

    Bloody beautiful Aussie cheers for that

  • @Ty-dz9ed
    @Ty-dz9ed 3 роки тому

    Fuckn looks clean as man👌 wouldn't look like that now but cob haha

  • @philgogler9091
    @philgogler9091 Рік тому

    So once you have done the oil and filter change, how do you delete the flashing service from the dashboard?

    • @billgeorgiou9929
      @billgeorgiou9929 Рік тому +1

      Switch the ignition to on press the accelerator 3 times then switch the ignition off.

  • @alkamierskynet1557
    @alkamierskynet1557 3 роки тому

    What about priming the filter?

  • @paulmorgan8426
    @paulmorgan8426 2 роки тому

    Do you really need to put the cover with the 6 bolts? It would make it quicker next time to leave it off. Any thoughts?

    • @ozComputerguy
      @ozComputerguy Рік тому

      No it’s a good thing to have in place. Multiple reasons. You could I suppose get a holesaw and make an aperture for next time. The cutout would even have a hole in the middle, with a little thought you could make it so it clips back in. Voila !

  • @trixiedusk4757
    @trixiedusk4757 Рік тому

    I’m now a certified UA-cam mechanic

  • @GERRARD9292
    @GERRARD9292 8 років тому +1

    can you do transmission fluid change plz~~

    • @AutoInstruct
      @AutoInstruct  8 років тому

      Unfortunately we can't as we no longer own our VE Commodore. Generally speaking all you need to do is locate the fill and drain plugs on the transmission. Drain all the oil, then fill it up as high as it will go!

    • @GERRARD9292
      @GERRARD9292 8 років тому

      oh..thx mate~ waiting 4 another episode..cheers

  • @sumandeepkaur9122
    @sumandeepkaur9122 8 років тому

    nice very gud

  • @adriand3753
    @adriand3753 7 років тому

    Hi mate, just wondering do you know what the oil filter is made? By holden? Made in USA? Cheers

  • @billdeere7420
    @billdeere7420 4 роки тому +1

    DRAINING OIL WHILE ON THE JACK....MMMM MIGHT STILL HAVE A LITRE OF NASTY OIL STILL IN THE SUMP.... DROP IT OFF THE JACK & STANDS TILL IT STOPS DRAINING...IT TAKES A FEW MINUTES MORE... BUT IF YOU DO A JOB... DO IT RIGHT.... HOPE IT HAS BEEN HELPFUL...

    • @PaulA-bv1rt
      @PaulA-bv1rt 4 роки тому

      Didn't you hear him say he was going to drop it off the jack when he replaced the filter.

    • @snufbox
      @snufbox Рік тому +1

      He did. And why are you yelling?

  • @Mr811251
    @Mr811251 5 років тому

    5w30 dex2 ok for vf 2013?

  • @Jaysen6R
    @Jaysen6R 7 років тому

    are these VE model specific? would the same process occur for the 8 cylinder VE's or different?

    • @AutoInstruct
      @AutoInstruct  7 років тому +1

      Jaysen Raveora Hey, the V8s are quite different in terms of layout and filter type, but the process for oil changes is the same

  • @ltstarbuck10
    @ltstarbuck10 7 років тому

    with the oil filter you used it does come with a o-ring

    • @AutoInstruct
      @AutoInstruct  7 років тому

      No it did not

    • @ltstarbuck10
      @ltstarbuck10 7 років тому

      ac Delco oil filters do come with o-rings i fit them every day to cars sry u got one with out

    • @TheAussieFloof
      @TheAussieFloof 5 років тому +1

      Ryco filters do

  • @josiahsalaivao2263
    @josiahsalaivao2263 2 роки тому

    Can u use 15w 40? For v6 vf commodore

    • @Manpreetc
      @Manpreetc 6 місяців тому

      Nah that’s too much bro

  • @geoffreylongstaff8557
    @geoffreylongstaff8557 4 роки тому

    Can I ask why you only put 6.5 litres in when my book states 7 litres (VF SV6 LFX)

    • @matt060383
      @matt060383 4 роки тому

      impossible to get every drop of oil out

  • @yingyangorca4124
    @yingyangorca4124 4 роки тому

    @AutoInstruct does it help to drain the oil by facing the front end toward a downward incline?

    • @Raven-cf5qd
      @Raven-cf5qd 3 роки тому +1

      Yes otherwise you can leave dirty oil in the back of the sump that would otherwise come out on a better angle

    • @yingyangorca4124
      @yingyangorca4124 3 роки тому

      @@Raven-cf5qd might try it next service. I did notice when you raise, lower, and remove filter, more oil comes out during these three stages.

    • @Raven-cf5qd
      @Raven-cf5qd 3 роки тому

      @@yingyangorca4124 pretty sure oil filters hold some oil in them thats probably why more comes out when removing it

  • @Mr811251
    @Mr811251 4 роки тому

    Any one have vf evoke transmission sarvice video???

  • @BURNSYINK
    @BURNSYINK 4 роки тому

    Castrol edge 5w30 be fine?

    • @iamasmurf1122
      @iamasmurf1122 4 роки тому +1

      BURNSY INK i use myself full synthetic oils like 5W 30 in all cars i work on im a mobile mechanic , the full synthetics exceeed )OEM original equipment manufaturer) specifications

  • @Rickybobby1340
    @Rickybobby1340 6 років тому

    U really trust that jack

    • @AutoInstruct
      @AutoInstruct  6 років тому

      There are jackstands under the car as well. The jack is an additional backup.

  • @SunnieSnell
    @SunnieSnell 2 роки тому

    How can i tell if my car is synth or mineral

  • @mozpogson3639
    @mozpogson3639 2 роки тому

    So much for instruction. No new O ring on filter cap. The filter doesn't fill up like a spin on does. No mention of frequency, which should be every 5,000 klm. As good as Nulon is, Penrite is best. Retired mechanic.

    • @OpinionStatedAsFact
      @OpinionStatedAsFact 2 роки тому

      Retired mechanic, but still full time dickhead. Even if you are right, you come across like a wanker.

  • @salem1538
    @salem1538 6 місяців тому

    Umm

  • @MongaloidMayhem
    @MongaloidMayhem 5 років тому +2

    Use Penrite, not Nulon 👍

    • @steveday3757
      @steveday3757 4 роки тому

      Nulon is a long Life dexos 5/30 no different to penrite ?

    • @steveday3757
      @steveday3757 4 роки тому

      Don't you use the New seal that comes with the new filter

  • @GlobalTriathlonNetwork
    @GlobalTriathlonNetwork 6 років тому

    Crap kept buffering

    • @snufbox
      @snufbox Рік тому

      Get off the dial up

  • @iamasmurf1122
    @iamasmurf1122 4 роки тому

    How embarrasing its a 6 !!

    • @lukeydukeful
      @lukeydukeful 4 роки тому +2

      What the fuck you Turkey! Nothing wrong with a six, what a fuck head!!