I just looked and this is a ~170$ magnet on Amazon?? Be just a effective to destroy the safe to get it open and then use the 170$ to go buy another one. IF your safe is empty, just buy another one. Will a cheaper, less strong, magnet work?
I saw how strong that magnet is and how you were having trouble pulling it off. I thought you'd be like a superhero with massive strength pulling the entire door off lol
This hack (and the "bouncing" one) no longer works on the newest models ...(since Master Lock bought the company) they are equipped with a spring follower and magnetic interlock, adjacent to the solinoid, specifically so they will not open with this method.
Great info. Thanks for sharing. What is the size of this magnet? How much does it cost? I need one for my safe. We forgot the code after not using it for a long time. Thank you
hi - my sentry safe has a plastic cowling that is in a position as to cover the actuator so as to not allow the magnet to get close enough to the steel door to open the pin it seems... mine is 10 years old, so some models seem to have had a modification to help avoid this dang it. I needed it to work as my solenoid has broken on it and sentry said 'just get the locksmith to drill it open.... at your expense".. handy that. Locksmith In Australia si $100 for call out plus $180 per hour. Not to mention the cost of a new safe as well.
Hudda Rudda mine is newer than ten years lol. So I guess they made them worse. You bounce the safe while pulling in the handle and do the same thing the magnet does.
Bored Lock picker wow. Really? Just bounce away and the pin will wobble enough to open? Terrible! Should not surprise me. The biggest magnet I can buy in Australia fir under $600 - eBay is 50mm x 30mm deep - the hockey puck is 100mm x 30mm - and I sourced one company $700. Maybe if my magnet got a clean attach it would work.
Bored Lock picker also - it’s attached to the floor - so I can’t wobble it till I get it open and unbolt it. Insurance won’t cover anything unless bolted to the floor in Aus.
Bored Lock picker any thoughts on where I’d drill it - to avoid paying a locksmith to $200 do it? I have the equipment - drill and bit. Just a normal drill bit? I can email you a photo of the safe?
@@BoredLockpicker I got one of those crazy strong magnets and ran it all over from top to bottom and nothing.. thank u for the reply. Maybe it's not strong enough?
@@goodwingirl7337 that means either the magnet isn’t strong enough or your safe doesn’t use the kind of actuator that’s susceptible to this method of opening.
no it wont. this works on the electronic one theres a metal piece that retracts when the right code is entered. the magnet can also make it retract. on the combination one theres actually wheels with cut outs in them. when you dial the combo you're lining those cut outs up and a fence drops into it allow it to open. no way to make that happen with a magnet
Have an older GM2459E 23.5 cf Sentry gun safe with similar control pad, do you happen to know how to remove the front touch pad in order to change the batteries, thanks
I contacted Sentry Safe Tech Support. Only a few models were affected and they provided a solution to prevent the magnet from opening the safe. It is a non issue.
I agree is a non issue. But they didn’t send any thing out to fix the safes affected by this so there’s still a lot of safes out there this works on. I have that magnate in my work van. Use it everyone once in awhile
I read that sentry had acknowledged this flaw, and said they provide an after market fix to prevent the opening by magnet. They list the safes they say need it and I could not find the model I was interested in, the senef3428e sentry safe. So my question is, does this magnet solution work on all sentry safes? Or only certain ones. IE the smaller safes they offer? Thanks!
@@BoredLockpicker Thank you for responding expeditiously! I really appreciate your advice.. Unfortunately this isn't a safe I'm willing 2 destroy just yet.. It's bolted 2 the ground so needless 2 say...there is no room 4 ANY type of movement. If u run across any info that could help me in the future , I would deeply appreciate the help.
I have seen this a few times before but it's cool to see again. Thanks for the info! Also did you release a similar video under a different account at about the same time? I found it funny that two different people i subscribed to made similar videos at the same time and noticed the voice and background were too similar. .. lol
Phred Phlintstoner I’ve got 7 it 8 accounts. They’re all specific to topics except that other one. It’s just a hodgepodge of all kinds of things I’m interested in
Bored Lock picker , plus it’s very tall, not small like a sentry safe. Looks just like the ones in a lot of the Winchester reviews. Hopefully that gives u an idea
Mark Diprete it’s 3 inches diameter and one inch thick. Not sure how much weight it can pull. Haven’t touched in a couple years. Tbh not even sure where it is.
not sure. I've tried it on that one. it depends on the actuator. if you can find a google image with the inside panel off or a schematic I could tell you
Ross lipinski its a dial combination safe? If that’s the right one the magnet won’t open it. No metal spring loaded actuator like on the electronic ones
My Sentry Safe key pad was broken off in a break in at my job. I'm not sure what my model my safe is but it is about 10 years old. Will magnet work if the key pad is ripped off?
I have a sentry safe I can't get into. I bought a N52 600lb magnet and still can't get it open. I also can't find the exact model of my safe on their website. ANY help would be appreciated
not sure what that is. if my safe is locked with key removed, can I use magnet. your demos seem to be only sentrys with key pad, no lock and key@@BoredLockpicker
@@djo9277 what model safe do you have? I have some other videos like this one that arent just keypads ua-cam.com/video/NujB-Uvi-H8/v-deo.htmlsi=fVDk1Lv4p9mWFnDC
@@BoredLockpicker from my research It looks like yours is 330lb pull. Mine is 300lb. these heavy duty magnets work on some of the safes, but not all. I am struggling with sentry model a3867...I am kinda close just using new batteries and factory default code.
@@BoredLockpicker www.bing.com/images/search?view=detailV2&ccid=M%2fNM%2b%2bhI&id=15679245A7A31450D3A1F778C9D5C75C7322C366&thid=OIP.M_NM--hIzZYCy0HhoOPh0AHaFj&mediaurl=https%3a%2f%2fauctionimages.s3.amazonaws.com%2f28719%2f27393%2f18605977.jpg&cdnurl=https%3a%2f%2fth.bing.com%2fth%2fid%2fR33f34cfbe848cd9602cb41e1a0e3e1d0%3frik%3dZsMic1zH1cl49w%26pid%3dImgRaw&exph=600&expw=800&q=a3867+sentry+photos&simid=608033014037370016&ck=EBACDEE4BCEF9C4A4F055B2E2862021F&selectedIndex=0&FORM=IRPRST&idpp=overlayview&ajaxhist=0 this is the safe
thanks ya i have the key but its not unlocking my sentry a5889 safe do you think your magnet trick might work or is there any other optionn i may have. i would have bought it to you if you were in n y
im not sure. i searched google but dont see any pictures of it with the inside panel off to see the actuator. if its the same springloaded style as the one in my video it would work. other thing you can try is hitting it where you think the actuator is with a rubber mallet while trying to move the handle to the unlock position. or bouncing the safe on carpet floor while trying to pull the handle
It would have been trivial to defeat that method - just make the solonoid the part that moves, and have the metal core fixed. But could you not just force the handle anyway? It looks like the locking mechanism would be the first thing to break.
So simple to prevent. The safe shown does is not equipped with a secondary key lock that prevents opening the safe with a magnet or even when the correct combination is entered. My similar Sentry safe has that feature.
Bored Lock picker I have a Sentry Safe with a key and digital code entry also. There is a white sticker on the front of the safe near the hinge with these numbers: NFW205G B06910571*
This Fishcan is the last Plastik Phantastik from Masterlock. Cast Zinc Bolt and cheap Plastik. Lockpicking Lawyer has this Thing cut in Half with a Circular Saw
We also sell this tool that works on safes with this keypad. (593) How to Open a Sentry Safe without a Code & Recover the Programming Code ua-cam.com/video/H3wrB0C451U/v-deo.html
I’m really surprised that the safe company used a magnetic component for such an important part of the safe (or not so safe lol) The great thing is it made a great video 👍
![[1020] SentrySafe Opened With a Coat Hanger!](/img/n.gif)
Here's the magnet amzn.to/2K3Sdz8
.
I just looked and this is a ~170$ magnet on Amazon?? Be just a effective to destroy the safe to get it open and then use the 170$ to go buy another one. IF your safe is empty, just buy another one. Will a cheaper, less strong, magnet work?
@@AlexBowen-nc9ml Have you tried it? Did it actually work or just another false advertisement?
I’d be interested to know the answer to alexbowen’s question
I took the liberty to write you regarding this video. Thank you for bringing this to my attention. Much respect. I subbed & thumbs up this vid.
appreciate it! thank you!
I saw how strong that magnet is and how you were having trouble pulling it off. I thought you'd be like a superhero with massive strength pulling the entire door off lol
picantesworld77 it is sentry I could see it happening lol
Hey, I was wondering why that no good son-in-law of mine had just bought a large magnet. I was missing some of my stash.
Worked like a treat thank you
Awesome!
Just saved me $200. Thanks dude
You’re welcome
Yes, but can you open the magnet with the safe?
I didn't think so.
🤯
Don't use one of these magnets if you have a metal plate in your head
solid advice!
My plate is not 🧲
I got titanium
Or a pace maker in your chest.
Or any artificial limbs and piercings
This hack (and the "bouncing" one) no longer works on the newest models ...(since Master Lock bought the company) they are equipped with a spring follower and magnetic interlock, adjacent to the solinoid, specifically so they will not open with this method.
.
@@BoredLockpicker SFW123GTC does not open with the magnet.
Great info. Thanks for sharing. What is the size of this magnet? How much does it cost? I need one for my safe. We forgot the code after not using it for a long time. Thank you
Don’t know.
Thanks.. My safe locked up this worked
BLUESTAR KING sweet! Glad it helped
Hi i wanna know if what is the minimum magnet dimension can use??
Will a fishing magnet work?
If it’s strong enough
These safes now come with an additional key lock that keeps the handle from moving. Does that prevent opening it with the magnet? Thanks
I don’t know. I have not taken one apart to look at the actuator
The tubular lock can be picked with a tool that is sold on Amazon for $40.
@@finsta74what tool
hi - my sentry safe has a plastic cowling that is in a position as to cover the actuator so as to not allow the magnet to get close enough to the steel door to open the pin it seems... mine is 10 years old, so some models seem to have had a modification to help avoid this dang it. I needed it to work as my solenoid has broken on it and sentry said 'just get the locksmith to drill it open.... at your expense".. handy that. Locksmith In Australia si $100 for call out plus $180 per hour. Not to mention the cost of a new safe as well.
Hudda Rudda mine is newer than ten years lol. So I guess they made them worse. You bounce the safe while pulling in the handle and do the same thing the magnet does.
Bored Lock picker wow. Really? Just bounce away and the pin will wobble enough to open? Terrible! Should not surprise me. The biggest magnet I can buy in Australia fir under $600 - eBay is 50mm x 30mm deep - the hockey puck is 100mm x 30mm - and I sourced one company $700. Maybe if my magnet got a clean attach it would work.
Bored Lock picker also - it’s attached to the floor - so I can’t wobble it till I get it open and unbolt it. Insurance won’t cover anything unless bolted to the floor in Aus.
Bored Lock picker any thoughts on where I’d drill it - to avoid paying a locksmith to $200 do it? I have the equipment - drill and bit. Just a normal drill bit? I can email you a photo of the safe?
theboredlockpicker@gmail.com
Interesting and seems to me an electromagnet would be more practical. Just flip a switch and wait a second and easily remove it.
Marshall Smith™ would definitely be less dangerous lol. That magnet is crazy
that would require a power supply though and seems a lot of extra work...
Do you know the strength of the magnetic?
Nope
Is there a certain kind of magnet needing to be used? I have a pretty strong magnet but it doesn't seem to be working.
Either the safe isn’t susceptible to this attack or the magnet isn’t strong enough.
The magnetic got stuck on the door & I can’t move it at all. Is there anyway to remove it?
Just takes strength. Try sliding to the edge
Use a drywall knife or find a man to overcome your natural shortcomings in the strength department you little fox
Where is that located on a large stand-up gun safe Sentry
I dont know. i've not taken one of those apart.
@@BoredLockpicker
I got one of those crazy strong magnets and ran it all over from top to bottom and nothing.. thank u for the reply. Maybe it's not strong enough?
@@goodwingirl7337 that means either the magnet isn’t strong enough or your safe doesn’t use the kind of actuator that’s susceptible to this method of opening.
@@BoredLockpicker thank you for your insight. I like your videos, you are appreciated.
Does this work for the combination one as well? That’s the one I have and I’m hoping it doesn’t work on it.
no it wont. this works on the electronic one theres a metal piece that retracts when the right code is entered. the magnet can also make it retract. on the combination one theres actually wheels with cut outs in them. when you dial the combo you're lining those cut outs up and a fence drops into it allow it to open. no way to make that happen with a magnet
@@BoredLockpicker thank you!
@@_ViralMoment you’re welcome
Will a fishing magnet open the safe?
If it’s strong enough
Will the Alarm set off? Cause I lost my key and the manufacturer haven’t sent my key due to the wrong of address
There’s no alarm on this model
Have an older GM2459E 23.5 cf Sentry gun safe with similar control pad, do you happen to know how to remove the front touch pad in order to change the batteries, thanks
probably a tiny screw on the bottom.
I contacted Sentry Safe Tech Support. Only a few models were affected and they provided a solution to prevent the magnet from opening the safe. It is a non issue.
I agree is a non issue. But they didn’t send any thing out to fix the safes affected by this so there’s still a lot of safes out there this works on. I have that magnate in my work van. Use it everyone once in awhile
That's amazing, I've got the same combination on my luggage!
Ben Joyce lol
Spaceballs
Spaceballs
Where does one buy it from. I need to unlock my lock. Please let me know
eBay is where I found mine
Where did you get the magnet?
On eBay
How do you open these up without a magnet?
Type the combination and pull the handle down.
@@BoredLockpicker Roll of toilet paper and a stick of dynamite. Easy!
Is it only for electronic safe can it work on combination lock
Yes and only few models of them. It won’t work on a combination lock. It’s a different internal mechanism.
I read that sentry had acknowledged this flaw, and said they provide an after market fix to prevent the opening by magnet. They list the safes they say need it and I could not find the model I was interested in, the senef3428e sentry safe. So my question is, does this magnet solution work on all sentry safes? Or only certain ones. IE the smaller safes they offer? Thanks!
I don’t what model numbers it works on. It will be any of them with this actuator. If you get a combination one that isn’t digital this work work
How strong is the magnet ????
Pretty strong
What Gauss rating is that magnet?
I don’t know
where can you buy this magnet?
I got
It on eBay but that was years ago
@@BoredLockpicker I noticed there are different kinds of magnets. How strong is the magnet you have in the video?
Does it still work with the new ones with the key
if it only uses a key this will not work
Where can buy magnet?
eBay is where I got mine
Does this work with Sentry 1310 combination safe too?
If it doesn’t have a digital keypad it won’t work.
@@BoredLockpicker do you have any suggestions on how to retrieve items from a sentry value guard 1310 safe?
Drill it or cut it open. Or take it to a locksmith. If you cut it just be aware it’s incredibly dusty and messy
@@BoredLockpicker Thank you for responding expeditiously! I really appreciate your advice.. Unfortunately this isn't a safe I'm willing 2 destroy just yet.. It's bolted 2 the ground so needless 2 say...there is no room 4 ANY type of movement. If u run across any info that could help me in the future , I would deeply appreciate the help.
@@katrinasparks3615 only other way I know besides a drill is manipulate it. that takes lots and lots of practice though
Would a mag switch 165 work or magswitch 400?
no idea
how strong is the magnet
Pretty strong
@@BoredLockpicker like a 40lb or
what is the pulling force in kg for the magnet needed to open safes like this ?
I dont know
What kind of magnet is that?
Neodymium magnet
Hello! Is the electronic safe usable after using the magnet or does it destroy the electronics?
It is still usable after doing this yes.
.
though? Once you get it open how to close it and lock it?
Magnet would still work
Do you know what the strength of the magnet is required to overcome the solenoid? Will a 550-lb fishing magnet do?
I've also seen 700lb, 900lb, 1500lb, etc. but maybe 550lb will be enough?
@bored lock picker, do you know what the strength is of the one you used in this video?
@@tomwall2361 I don’t know
Bored Lock picker my safe model is CSW3067, where would i need to put my magnet to get into this safe?
That one may not be susceptible to this kind of opening. If it is it should be around the same spot as this video.
I have seen this a few times before but it's cool to see again. Thanks for the info! Also did you release a similar video under a different account at about the same time? I found it funny that two different people i subscribed to made similar videos at the same time and noticed the voice and background were too similar. .. lol
Phred Phlintstoner yea lol. That’s my main channel. I’ve that one going for like a decade
Bored Lock picker funny. Lol I wonder how many more of the 600+ accounts I'm subbed to are really just multiples... that's great! Lmfao
Phred Phlintstoner I’ve got 7 it 8 accounts. They’re all specific to topics except that other one. It’s just a hodgepodge of all kinds of things I’m interested in
What is this other account...
What is the size of the puck an the weight
I don’t know
What model safe is this? I have a sentry and thinking about switching mine out now! Lol
I dont recall and I dont have it anymore.
Oh man!I just got the sfw123btc whit the biometric system, do you think is safe to have,or should I return it and ask for my money back?
You’d have to take the back of the door off and see what kind of actuator it uses
Does it open a Winchester safe also?
Crazy pop Anime land what model
I have a Winchester silverado 26 gun safe. Will this work on it?
carl moore nope. Locksmith or you might be able to get the combination from the manufacturer
Bored Lock picker , not sure but on the back it has SN:WIN-13-111437
Bored Lock picker , plus it’s very tall, not small like a sentry safe. Looks just like the ones in a lot of the Winchester reviews. Hopefully that gives u an idea
how many lbs pull is the magnet?
Mark Diprete I don’t know
Mark Diprete it’s 3 inches diameter and one inch thick. Not sure how much weight it can pull. Haven’t touched in a couple years. Tbh not even sure where it is.
Does the magnet trick work for the Sentry safe T6-331? I forgot the combo, and tore the sticker off awhile ago.
not sure. I've tried it on that one. it depends on the actuator. if you can find a google image with the inside panel off or a schematic I could tell you
Easy ua-cam.com/video/LO8gj_a8N7g/v-deo.html
Yes
G
Would a 3 día by 2” thick n42 magnet work?
I don’t know
All good I just figured it out n opened my safe thanks anyways tho you’re truly appreciated
@@joshhernandez9670 you’re welcome
Lord, what size is that magnet? I have one thats about 5cm x 3cm for fishing and its pretty freaking strong.
David Pursel, Snake Hunter it’s a little bigger than a hockey puck and pretty heavy
Is that a double lock safe?
If you mean does it have a re locker. No
@BoredLockpicker i mean what if the safety vault has dual lock, you need a key and password to open.. can that magnet open that kind?
No
@@BoredLockpicker so the magnet can only open a safety vault with all electronics?
What about the new version with a secondary key?
Ross lipinski if the key is a backup and
It’s the same actuator then this would work what’s the model number?
MODEL SFW123GTC
But the key locks out the handle even with the code
Ross lipinski its a dial combination safe? If that’s the right one the magnet won’t open it. No metal spring loaded actuator like on the electronic ones
Most decently a digital with secondary key www.sentrysafe.com/product/SFW123GTC
Can you use a ceramic magnet instead? If it still has at least a 125 pound pull force?
Jasmine Bush long as it’s strong enough
How much force does it need
I'm trying it and it's not working, maybe mine is different on the inside
Either it’s different or the magnet isn’t strong enough
My Sentry Safe key pad was broken off in a break in at my job. I'm not sure what my model my safe is but it is about 10 years old. Will magnet work if the key pad is ripped off?
it just depends what kind of actuator it uses. if its this same of actuator then yes the magnet will work even without the keypad
@@BoredLockpicker Thank you !
Can it be any magent or does it have to be the rare earth metal?
It needs several hundred pounds of pull
Where I get buy?
I got it on eBay
I have a sentry safe I can't get into. I bought a N52 600lb magnet and still can't get it open. I also can't find the exact model of my safe on their website. ANY help would be appreciated
Dave Foster e-mail me a pic of it. theboredlockpicker@gmail.com
@@BoredLockpicker I sent the pic
Dave Foster I replied
What lb magnet were you using in this video
I dont remember . It may be answered in another comment on here..
What is the power of this magnet
Strong
my sentry has key, do this if safe is locked?
This work if yours has a key override.
not sure what that is. if my safe is locked with key removed, can I use magnet. your demos seem to be only sentrys with key pad, no lock and key@@BoredLockpicker
The magnet isn’t going to work on your safe
@@djo9277 what model safe do you have? I have some other videos like this one that arent just keypads ua-cam.com/video/NujB-Uvi-H8/v-deo.htmlsi=fVDk1Lv4p9mWFnDC
thanks
@@BoredLockpicker
was trying to see if its better to buy wider or taller magnet to get stronger pulling force. What thickness was your magnet pls? ( i subscribed!)
Mr T63 this is it rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F120487453875
I would like to ask if I can use earth magnet? ths size is Dimension: Diameter 60mm x thickness 30mm I'm not sure if it will work tho..
I don’t know how strong that magnet would be.
Are there any of these small safes that are worth getting?
To protect things from fires. Yes. For security not really. These aren’t real safes. You can really only get a decent safe from a locksmith shop.
@@BoredLockpicker what is the smallest safe for security that you would recommend?
Neil oppa gardall makes decent safes.
@@BoredLockpicker thanks :)
Neil oppa no worries 👍🏼
what is the LB pull of the magnet?
I don’t know
@@BoredLockpicker from my research It looks like yours is 330lb pull. Mine is 300lb. these heavy duty magnets work on some of the safes, but not all. I am struggling with sentry model a3867...I am kinda close just using new batteries and factory default code.
@@HelmetVanga it only works on ones with actuators like the one in my video. Does your safe have a back up key?
@@BoredLockpicker yeah, it has a physical key that you insert in. does that make a different and this is why a magnet will not help? I wonder
@@BoredLockpicker www.bing.com/images/search?view=detailV2&ccid=M%2fNM%2b%2bhI&id=15679245A7A31450D3A1F778C9D5C75C7322C366&thid=OIP.M_NM--hIzZYCy0HhoOPh0AHaFj&mediaurl=https%3a%2f%2fauctionimages.s3.amazonaws.com%2f28719%2f27393%2f18605977.jpg&cdnurl=https%3a%2f%2fth.bing.com%2fth%2fid%2fR33f34cfbe848cd9602cb41e1a0e3e1d0%3frik%3dZsMic1zH1cl49w%26pid%3dImgRaw&exph=600&expw=800&q=a3867+sentry+photos&simid=608033014037370016&ck=EBACDEE4BCEF9C4A4F055B2E2862021F&selectedIndex=0&FORM=IRPRST&idpp=overlayview&ajaxhist=0 this is the safe
Where can I buy this Magnet.
click on the pinned comment. it says they're unavailable but that gives you the specs to search around
Awesome video, great presentation
thank you!
Nice Canadian content. Hockey puck and Crown Royal.
thanks
Where did you get that magnet?
01001010010001 01001100101001 from eBay
Hey what's up JL?
Not exactly a refrigerator magnet and would be pretty uncommon for someone, even criminals to be carrying one of these around.
Actually more common that one would think lol
@@williamdutton4947 I agree with that
.
Where did you buy that magnet at?
on ebay its 3 x 1 inch
Does the magnet harm the safe in any way?
nope. its just compressing a spring
@@BoredLockpicker Thanks.
@@mikestone9129 you're welcome
Mike Stone you’re welcome
Where do you buy these magnets from?
Google rare earth magnets. I have a few. Use to get metal pins out
.
@@BoredLockpicker do these magnets work on safes that they use in Family Dollar or Walgreens?
Mind telling us - what grade is this magnet? size is it 2" or 3"? Thank u
no idea what grade it is. its 3 inches around
@@BoredLockpicker Ive seen plenty of your responses. You keep saying, "I dont know". Go educate yourself or delete this Useless video.
thanks ya i have the key but its not unlocking my sentry a5889 safe
do you think your magnet trick might work
or is there any other optionn i may have. i would have bought it to you if you were in n y
im not sure. i searched google but dont see any pictures of it with the inside panel off to see the actuator. if its the same springloaded style as the one in my video it would work. other thing you can try is hitting it where you think the actuator is with a rubber mallet while trying to move the handle to the unlock position. or bouncing the safe on carpet floor while trying to pull the handle
Do you know the factory code
Is there any way to mod the actuator so it doesn't do that even if that means building a new part .
Best way would be to make it out of brass or something that isn’t magnetic
Got any lead? Lol
What about lockset on a cannon?
not sure I understand the question
It would have been trivial to defeat that method - just make the solonoid the part that moves, and have the metal core fixed. But could you not just force the handle anyway? It looks like the locking mechanism would be the first thing to break.
Sylvia Else the handle actually breaks free before it forces the locking mechanism open
Oh well, at least they thought of that.
Rare Earth Magnet young man!
thank you
So does that work if there is no battery or dead battery?
borg386 yes
Update to This Video: ua-cam.com/video/QKR7mtCiOss/v-deo.html
.
How big is the mag
www.ebay.com/itm/Neodymium-Magnet-3-x-1-inch-Disc-N48-Big-Rare-Earth/120487453875?hash=item1c0d9ca4b3:m:mMVa677KHbF5Y257Ct8AosQ
So simple to prevent. The safe shown does is not equipped with a secondary key lock that prevents opening the safe with a magnet or even when the correct combination is entered.
My similar Sentry safe has that feature.
sounds like you've got a better model than this
Does it break the safe?
nope
Hi picker, would you magnet solution work on Sentry safe that has both the lock and the electronic key pad?
Hen Sum what’s the model number? I’ll look it up
Bored Lock picker I have a Sentry Safe with a key and digital code entry also. There is a white sticker on the front of the safe near the hinge with these numbers: NFW205G
B06910571*
Heather Kendig not sure but I’ll check later and let you know
@@BoredLockpicker I guess you didn't really want to respond to this person lol its been 10 months now.
Matthew King must of forgot. Can you research it and let them know? Thanks
This Fishcan is the last Plastik Phantastik from Masterlock. Cast Zinc Bolt and cheap Plastik. Lockpicking Lawyer has this Thing cut in Half with a Circular Saw
Angle grinder works really well too.
What if the safe has no handle?
Depends what kind of actuator it uses
Not sure I have none of the original info box and papers was thrown around it’s a sentry safe that
It’s model v360
Thanks bro. My Gma passed and has a safe just like this. No code. No key. Dead batteries.
We also sell this tool that works on safes with this keypad. (593) How to Open a Sentry Safe without a Code & Recover the Programming Code
ua-cam.com/video/H3wrB0C451U/v-deo.html
thanks for your advice. all the best to you.
.
This is actually my prefered method of opening Sentry Electronic Safes.
lol I agree
I own one of these myself,I dont even put in the combination anymore,slapping a magnet on it takes less time.
It's working all locker ?? I have locker. It can't open
only safes with that kind of actuator
How can I get one please
I got mine on ebay
@@BoredLockpicker what is it called
its a neodymium magnet
Does it work with a 350 pound fishing magnet
no idea. If youtube didnt turn off the money to my channels for not having enough subs I'd buy it to try it out and make the video
I’m really surprised that the safe company used a magnetic component for such an important part of the safe (or not so safe lol)
The great thing is it made a great video 👍
daz evers yep. It’s just a steel Spring loaded actuator. This Safe is more for keeping things safe in a fire than for Security
This is the Sentry Unsafe
its just a fire safe. it always be picked up and taken from somewhere. safe meant to be a safe would able to be bolted down
daz evers : iii
The fact that you could carry it though isn't a problem... Jesus. UA-cam really does show how dumb we are as a species....
I have a sentry X105. I order a 40mmX20mm rare earth magnet. Would that work?
I don’t know. If depends what kind of actuator this model uses.
It’s important to note that if you get this magnet near anything electronic like your cell phone it will destroy it in a matter of one second.
Thanks
Crown royal is the breakfast of champions.
That’s right!
i need that magnet were can i buy one you said $20 in a video
mikimikemike1 I didn’t hear myself say a price. They cost around $200 on eBay