Make your own coat rack - Wall mount - With a Shelf

In this video I will show you a simple, easy way to make your own coat rack. All of the materials to make this your own, are easily obtained and are budget friendly. Also, this coat rack can be started and finished in about a day!
If you don’t have the tools or know-how to build one but still want to own one…
Email me directly: [e-mail]
Or visit my Etsy Shop here: www.etsy.com/shop/ScotchInHan...
Follow me on Social Media:
Instagram - / scotchinhandmillwork
Facebook - / scotchinhandmillwork
Additional videos to watch:
How to make a SIMPLE Custom Wood Wine Rack - How to Build - DIY - Wood Working Project
• How to Make a SIMPLE C...
Turn a LIVE EDGE slab of wood into a Bench / Coffee Table - How to woodworking - Black Walnut
• How to Make a Live Edg...
Below you can find a list of the tools and materials I use in this video and on a daily basis. I am not sponsored by any of these companies or brands. However, I do earn a very small commission if you use any of the links below to purchase. There is no added cost to you at all and it's greatly appreciated since it helps me keep the lights on in my shop and making more content! Thank you!
Dewalt DWS716 Dual Bevel Mitre Saw amzn.to/2EQ88B7
Dewalt 7491RS Table Saw amzn.to/2QDJCpK
Makita BO5041K 5-inch Random Orbital Sander amzn.to/3hFInCo
Varathane Pre-Stain Wood Conditioner amzn.to/3gGrq9E
Varathane Dark Walnut Oil-Based Stain amzn.to/2QDfs68
Varathane Ultimate Clear Semi-Gloss Oil-Based Polyurethane Spray amzn.to/3hCrwQK
Dewalt 12" 100lb 2-1/2” Throat Trigger Clamps amzn.to/2ECxTVS
Bessey 36” 1000lb 3-1/2” Throat Clutch Clamps amzn.to/3hJcnNt
Rigid 4 gal 5.0 Peak HP Wet/Dry Shop Vac amzn.to/31L1bux

[@scotchinhandmillwork6528]

This project is easy, anyone with a bit of basic knowledge can make it no problem. There's also a million different ways to customize it...so go wild with your imagination. Let me know if you made it and how it turned out!

[@nathanchida972]

Hey man when making those cuts with your miter gauge and cross cut sled around the 1:10 mark, I would recommend having some type of 1 inch spacer block on the inside of the fence, and adding 1 inch to your fence dimensions. It’s not a good idea to make crosscuts with the stock flush with the fence, it’s a known issue to cause kickbacks or other problems

[@TomRubicon5949]

quick and easy, does the trick. Great video!

[@tburd7186]

I just made one of these today!

[@scotchinhandmillwork6528]

That’s awesome! I hope it turned out great!

[@LonghornWorkshop]

Nice project sir

[@scotchinhandmillwork6528]

Thank you for watching!

[@MrSodelmar]

what did you do to get the screw flush on the back of the board, when connecting the shelf to the backboard ? looks like you use a special bit ? or is that a phillips head?

[@PinkDiamonds977]

Thanks for that awesome video! What are the finished dimensions of the small coat rack? How wide is the shelf and how many inches apart are the hooks? I have a very small space to work with. Thanks so much!

[@hannahpage9076]

Hey can you share the dimensions?

[@scotchinhandmillwork6528]

The version with 5 hooks is 24" L x 9.25" W x 3/4" T hope this helps...

[@elizsanz3972]

i want to just go for it, should I give the dimensions to the people at home depot? I dont have access to any of those tools, and im kind of intimidated to buy them and not know what to do with them.

[@scotchinhandmillwork6528]

You should go for it. The people at Home Depot or somewhere else might cut them for you? Not all stores are created equal even in a huge corporation

[@mrsbrownLove]

Great project! How much do you charge for this?

[@scotchinhandmillwork6528]

Thank you! Honestly, it all depends on the size. If you’re curious I have a shop on Etsy under the same name or just shoot me a private message and I’ll gladly answer any questions you may have! 👍

[@Eri-pd9vb]

What size screws were those?

[@scotchinhandmillwork6528]

The screws to hang it on the wall or the screws for the hooks?