Tutorial: Ion Mid Pocket

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 57

  • @CoachMikeWoosley
    @CoachMikeWoosley Рік тому +4

    I got my kid an ion that he has wanted forever and this was really nice, helped me a lot

  • @Laxregina
    @Laxregina Рік тому +3

    I love ions so I’m gonna totally use this on my next one!

    • @ECD
      @ECD  Рік тому

      This is a really awesome pocket

  • @W.duckett_9
    @W.duckett_9 Рік тому +1

    @ECD is this the same as the elite pocket or is it different?

  • @traubenberg
    @traubenberg Рік тому +4

    Thanks for the inspiration, Greg! I used this as the basis for an Ion / Hero 3.0 string job and it's AWESOME.

  • @peter15walsh
    @peter15walsh 7 місяців тому

    On the website under the Ion it says "We recommend a mid-low pocket for maximum performance." What would you suggest to get it mid-low, do a 1 instead of where you did a 2 here, then do a 2?

    • @joshuahollobaugh7382
      @joshuahollobaugh7382 6 місяців тому

      no what mid low means is the pocket is in the middle, and it is a deep/low pocket. They reccommend that bc of the way it is shaped. i have one i recently strung and it turned out very close to this video as i followed it the whole time. was my first time stringing

  • @lcmedia22
    @lcmedia22 2 роки тому +4

    Would a high pocket shoot well on the ion? Or is it just that it is more difficult to string a high pocket

    • @ECD
      @ECD  2 роки тому +2

      A high pocket would work really well in this head too!

  • @loganbowersox9027
    @loganbowersox9027 Рік тому

    If i want a lower pocket should i just push the 2s lower?

  • @rdai_5450
    @rdai_5450 2 роки тому +3

    I have pretty low whip and a mid low pocket could you do a tutorial or send me a pattern that would be very nice I gotta string my friends tomorrow 😭

    • @ECD
      @ECD  2 роки тому

      This is a pretty low whip pocket

    • @rdai_5450
      @rdai_5450 2 роки тому

      @@ECD I like mine to sit lower should I pound it lower to loosen up the 1’s

    • @MongoLionsLakais
      @MongoLionsLakais 2 роки тому

      @@rdai_5450 drop the bottom string a row and pound her low thats what I did

  • @harrison1789
    @harrison1789 Рік тому

    Can you do a shooter string tutorial?

  • @saltedhash6467
    @saltedhash6467 Рік тому +3

    Instruction falls apart at 3:19. So frustrating.

  • @aaronbarker7
    @aaronbarker7 Рік тому

    can i move the 2s a bit higher for a mid high, and add si’s to create a tighter channel?

  • @noahsiegel3127
    @noahsiegel3127 Рік тому

    I just put this pattern in and I like it, but I want it to have more whip should I move my shooters down one row each and tighten?

    • @ECD
      @ECD  Рік тому

      You could move them down or you could tighten them up a a little bit

  • @tanner212
    @tanner212 Рік тому +1

    am i the only one who tried to string this and the mesh on the sides in some places stick up weird and are loose?

  • @G00FYY
    @G00FYY Рік тому

    How come I got a custom one and it has one of the shallowest pocket

    • @ECD
      @ECD  Рік тому

      hmmm... it shouldn't be shallow. Did you try to pound it? If you are having issues with the pocket email sales@ecdlax.com

  • @shugs04
    @shugs04 Рік тому

    How do you do the top string tho???

    • @ECD
      @ECD  Рік тому

      It's just a variation of the standard 9d topstring. Really easy to do but hard to show on a video. We've tried to make the video a bunch of times and it's impossible to follow

  • @marczappulla7984
    @marczappulla7984 2 роки тому

    What is the pattern you strung up for Brock Beherman

    • @ECD
      @ECD  2 роки тому +1

      I don't think I saved that pattern....

  • @wetsockoutdoors8538
    @wetsockoutdoors8538 2 роки тому

    I only have 8d mesh at the moment, could I do this with the ion?

    • @ECD
      @ECD  2 роки тому

      You can use any mesh, However the pocket may perform a little different then shown

  • @brandonperkins6889
    @brandonperkins6889 2 роки тому +5

    Armor mesh vid??

    • @ECD
      @ECD  2 роки тому +3

      Actually working on one.

    • @noahsiegel3127
      @noahsiegel3127 2 роки тому

      @@ECD Is it for a specific head? I've wanted to put it in my mirage for some time now, but never could figure it out.

  • @WhiteheadEd-p3x
    @WhiteheadEd-p3x 3 місяці тому

    Ledner Hollow

  • @carterwhite5620
    @carterwhite5620 2 роки тому +3

    Stringing to the inside tutorial???

  • @carterwhite5620
    @carterwhite5620 2 роки тому

    🎉🎉Finally!!!!!!thanks so much

    • @ECD
      @ECD  2 роки тому

      No problem!

  • @TateMerry-d3y
    @TateMerry-d3y 3 місяці тому

    Tromp Crest

  • @Turp111
    @Turp111 Рік тому

    Love your stringing tutorials. General question - how do you determine what sidewall hole to start on, and what holes to skip?

    • @Xqqm
      @Xqqm Рік тому

      Play around with it do it many times till you get a pocket you like

  • @RobertMontgomery-j8m
    @RobertMontgomery-j8m 3 місяці тому

    Mckayla Extensions

  • @VannessaDigiorgi-u8v
    @VannessaDigiorgi-u8v 2 місяці тому

    Dickens Lights

  • @kory4189
    @kory4189 2 роки тому +8

    High pocket?

    • @ECD
      @ECD  2 роки тому +1

      We will work on some more pockets!

    • @Grandpiss
      @Grandpiss Рік тому

      We need the high pocket!

  • @YuKroeger-v2o
    @YuKroeger-v2o 3 місяці тому

    Adams Island

  • @mattnolan3420
    @mattnolan3420 2 роки тому

    Woot woot!

  • @MayBasil-r6u
    @MayBasil-r6u 3 місяці тому

    Lorna Avenue

  • @Apegocrazy
    @Apegocrazy 8 місяців тому

    Don’t even help me string it up

    • @morocko
      @morocko 6 місяців тому

      nah ur just dumb

  • @spongeboblover6630
    @spongeboblover6630 9 місяців тому +1

    Worst stringing video ever seen

    • @6o7mailman82
      @6o7mailman82 8 місяців тому

      Have to agree. Lol. My 13yr old tried to follow and got lost about halfway through. I see why. Dude just goes too fast and you cant see what he's doing, and doesn't really show what he did to finish the knots at the end.

    • @lol-em6bj
      @lol-em6bj 8 місяців тому

      @@6o7mailman82just slow down. i’s not that hard. and funny thing is, just go to a pro or a different tutorial

  • @jamesbakal309
    @jamesbakal309 2 роки тому

    First