If you haven't figured out the AC thing, in the protocol settings under factory settings you'll find the A/C flash screen. You can disable that and also Enable the floating AC Icon. Those are the only two AC options there. The way it would work is that when you push the buttons, the AC would work as intended, but nothing will change on the screen. IF you want to set the temp or anything specifically, you can use the floating button which I have on my lower right corner. So far so good. May not be idea for some, but I find this pop-up annoying, and there's no way to stop them as the buttons are sensitively cheap. head unit works great and great audio. The only issue is some intermitency with Carplay and Android Auto, more on the Carplay side. But when it does work, it works fine. I'm fine tuning the settings as I go to get rid of the non-essentials as I only use it for music and nav.
So I googled it which is what I should have done in the biginning and yes I did leave the floating button for when I need a certain temp. Aside from that I'm ok with AA, I've found my work around with it and if anything I'll just connect it via USB. There is car link too which is like 25 bucks I think. It's supposed to be smooth, better than zlink.
You don't need the floating icon for AC, is very ugly, you just have to download and set your car specifications from factory setting/canbus/Toyota/lexus is (high or low version) .. etc. then you have to close the pop up AC display but then you have to put the AC from car setting only, but it wouldn't pop up in your face while you'r driving again.
Hello I had the same unit in my car for 2007 lexus is250 in your setting for protocol settings you pressed Toyota i dont see an option for lexus is250 also my air conditioner is working but having a problem switching to heat mode
Does anyone else’s AC climate control not work? Mine is turned on permanently at the moment and can’t turn it off through the app or through the buttons
Have you figured out a way on how to change the logo when it boots up because I’ve had mine for like a year almost and I haven’t been able to change it to the Lexus logo when I turn on the car 😔
@@KK001 well I used UA-cam on it so I'm speaking from what I experienced. But again I'm not using it for that I got it for AA and because I didn't have a backup camera. Plus a phone is constantly connected to the Internet and running multiple apps where the unit is just communicating with the phone. There's a 1Gig unit but I'd stay away from that. My unit hasn't crashed nor showed glitches.
Yeah u can but at this point the disc part is just cosmetic. Personally I'm not a fan of the Tesla screen and I didn't want the radio to look aftermarket. This is as close to factory as it can get.
Hey man, thanks for the video but I’m having trouble with the system working in general. My camera/temp system doesn’t seem to connect even though I had it completed at a shop. Not sure if they messed it up or not but would it be possible if I can reach out to you?
What do you mean your camera/temp? Might be some settings that need fixing. Also if anything go back and tell them what's wrong. Weird they didn't show you everything is working. If you want to reach out you can through: IG xdro.720 Discord xdro720#5827
Just got this, but car set isn’t working. I went into car settings and protocol, selected the same one you did, confirm and update and still nothing. Had this issue before?
You can but I haven't tried it. I did install a movie app and well the screen isn't the best so the night scenes were not that great. But it can handle movie streaming.
Please, my brother, I have a question about my car, so it has an original screen. I ordered a screen from a site, but it does not match the original cable. I have a difference in some cables. Can you send me a link so that I can order it and it matches the type of cable and cable?
@mexag720 I plugged the antenna wire from the car to the bottom of the radio, and then for the top one I plugged in the gps and antenna that came with the unit. I'm guessing this is wrong.
Make sure you plugged everything correctly. Trouble shoot it by doing through each plug until you find which activates it. I had something similar turning on the car. Turns out there was a plug on the amp that was misplaced, once plugged in correctly everything was good.
It's not perfect I can't always get it to connect but I usually restart both my system and the unit. I delete it from my previous devices list. And I run zlink first and then go to BT and connect from there to the phone. Give it a minute. If not disconnect and reconnect.
I have a question I just installed this radio and I have the zlink but it asking me to add a credit card it does said 0.00 charge but if it's not charging me why is it asking for a credit card?
@@mexag720 mmm Nice to know that it is possible to get the physical temp buttons to work. Did you use the obd (canbus) connector to get this work? What Year is your car from? Do you have a picture of your canbus box? Can you make a photo of the canbus / software firmware version? Try to fix this for months. edit: i See in the first part of this video that you have the same canbus decoder. So i’m happy to find Someone with the same configuration. Maybe the answere on the questions above will help me with debugging. Do you have a picture of wich cables you use?
@@Marvin1985NL no it's the factory wiring. Technically the non nav is just temp buttons and a display for the radio frequencies. Adding the display moves the buttons around. The OEM nav system is similar to this one. You have physical buttons but also can use the touchscreen.
@@mexag720 aha, the physical buttons don't work at my radio. The touchscreen buttons offcourse do work. Before changing to this radio. I had the basis radio (non nav). I think we both have the same setup, but my buttons don't work. Maybe it has to do with the decoder. I red that there is an US and Europe version. I live in the netherlands (europe), so maybe that is the case. I have the same decoder HW en SW (software) as you do. I say that number on the video. I appcreciate your help. Good to know that the OBD connector is not necessary for the button's to control. i will install discord on my phone. In nl it's nog widely used.
@@Marvin1985NL wiring method is what's used not OBD, plus these units are built better where it detects when you put the car in reverse bringing up the backup camera
Haven't tried it but it does have an app for that and the Original AM FM Radio but I used the antenna for this android unit. The OEM Bluetooth still tries to connect though.
You could try connecting it first to see if compatiable or not. If not, then you would need to purchase the decoder for the factory back-up camera to communicate with the Android Head Unit.
@@edgarl5453 I got this installed at a shop, I did notice they tapped into the obd I'm not too sure if that may have anything to do with it but mine is working fine wether touch screen or physical buttons
If you haven't figured out the AC thing, in the protocol settings under factory settings you'll find the A/C flash screen. You can disable that and also Enable the floating AC Icon. Those are the only two AC options there.
The way it would work is that when you push the buttons, the AC would work as intended, but nothing will change on the screen. IF you want to set the temp or anything specifically, you can use the floating button which I have on my lower right corner. So far so good. May not be idea for some, but I find this pop-up annoying, and there's no way to stop them as the buttons are sensitively cheap.
head unit works great and great audio. The only issue is some intermitency with Carplay and Android Auto, more on the Carplay side. But when it does work, it works fine. I'm fine tuning the settings as I go to get rid of the non-essentials as I only use it for music and nav.
So I googled it which is what I should have done in the biginning and yes I did leave the floating button for when I need a certain temp. Aside from that I'm ok with AA, I've found my work around with it and if anything I'll just connect it via USB. There is car link too which is like 25 bucks I think. It's supposed to be smooth, better than zlink.
You don't need the floating icon for AC, is very ugly, you just have to download and set your car specifications from factory setting/canbus/Toyota/lexus is (high or low version) .. etc. then you have to close the pop up AC display but then you have to put the AC from car setting only, but it wouldn't pop up in your face while you'r driving again.
Looks great hope to get this for my Lexus soon 😂
Hello I had the same unit in my car for 2007 lexus is250 in your setting for protocol settings you pressed Toyota i dont see an option for lexus is250 also my air conditioner is working but having a problem switching to heat mode
When going to get make sure the AC button isn't on.
Please make a video how this is hooked up !
Does anyone else’s AC climate control not work? Mine is turned on permanently at the moment and can’t turn it off through the app or through the buttons
Just ask, what sounds quality? Its same, or worse? Ty for answer 🙏
Do you have a setup guide? For some reason my ac won’t work can’t even press the buttons
Have you figured out a way on how to change the logo when it boots up because I’ve had mine for like a year almost and I haven’t been able to change it to the Lexus logo when I turn on the car 😔
Never looked into it, when I turn the car on it boots straight to the home screen. I don't see it boot unless I restart it.
The ventilation and heating of the front seats do not work after installing Android Auto. can anyone help me?
I just got it backup camera was working good now it doesn’t pop out took it to the guy who put it on everything seem fine any ideas ?
Can you play music videos on this? I haven’t seen any video play on it or stream video .
Install guide for this headunit pls. I have it in-hand and would like to install it myself
Sorry got it done at a shop
Hello does it support the originale rear caméra of the car ?
Yes it has an adapter, you have to change the camera settings so that it works
@@mexag720 thank you very much
is the reverse cam the original that came with the car or did you add the cam?
It came with the unit not the car, i have a non nav IS250
Is 2gb ram enough for yputube and google map?
It works fine, I wouldn't really run heavy apps other than maps and a different launcher though. I got the extra ram so that it's smoother.
Not really. My phone in 2013 had 2gb of ram and my current phone has 12gb, so 2gb is pretty bad and id go for a higher spec of the unit.
@@KK001 well I used UA-cam on it so I'm speaking from what I experienced. But again I'm not using it for that I got it for AA and because I didn't have a backup camera. Plus a phone is constantly connected to the Internet and running multiple apps where the unit is just communicating with the phone. There's a 1Gig unit but I'd stay away from that. My unit hasn't crashed nor showed glitches.
whats your ram and is it enough for yt and stuff?
2 gb ram, perfect for regular apps. There is a 6gb model too, but I'm using it for Android Auto so I don't need much.
Can I use this without the CD player part? I think it’s just purpose defeating to have a nice updated screen and still the same old ugly bottom.
Yeah u can but at this point the disc part is just cosmetic. Personally I'm not a fan of the Tesla screen and I didn't want the radio to look aftermarket. This is as close to factory as it can get.
Is camera Included for rear ?
Yeah check out the link
Hey man, thanks for the video but I’m having trouble with the system working in general. My camera/temp system doesn’t seem to connect even though I had it completed at a shop. Not sure if they messed it up or not but would it be possible if I can reach out to you?
What do you mean your camera/temp? Might be some settings that need fixing. Also if anything go back and tell them what's wrong. Weird they didn't show you everything is working.
If you want to reach out you can through:
IG xdro.720
Discord xdro720#5827
My back up camera doesn’t seem to turn on when I’m reversing. And none of my temperature controls, both the buttons and software don’t work.
And the audio man lol. I assumed it’s the settings but I’ve got no idea tbh. Sent you a request on discord too.
Actually got the audio working. Realized my audio button was off lmaooo. But the camera and temperature buttons still don’t work.
@@BenDover-v3z did you make sure everything is connected?
Just got this, but car set isn’t working. I went into car settings and protocol, selected the same one you did, confirm and update and still nothing. Had this issue before?
Did you reboot the system? Reboot it through car settings. It's on the left bottom column.
Quick question can you screen mirror to the point where you can watch movies on this ?
You can but I haven't tried it. I did install a movie app and well the screen isn't the best so the night scenes were not that great. But it can handle movie streaming.
@@mexag720 gotcha, yeah I’m looking to watch sports on road trips hahah
@@TheXavierGarner get a high ram option and you'll be good and you can side load the app
is the sound quality as good as the oem radio
100x Better, youve got a 40 band eq. Its insane the difference you can achieve
It's really good, no loss in sound quality
Please, my brother, I have a question about my car, so it has an original screen. I ordered a screen from a site, but it does not match the original cable. I have a difference in some cables. Can you send me a link so that I can order it and it matches the type of cable and cable?
The link is in the description
hey what year do you have was your original screen white ?
@@keeganorourke7495 mine is aftermarket, it's a base model. No screen just buttons for the radio and AC
@@mexag720 okay I really wanted to get one but apparently the white screen versions you can’t do it or need a special harness or something
Hi did you have an issue with the radio, my radio does not work doesnt pick up station
None at all, did you connect the antenna from the bottom unit to the new head unit?
@mexag720 I plugged the antenna wire from the car to the bottom of the radio, and then for the top one I plugged in the gps and antenna that came with the unit. I'm guessing this is wrong.
Hi. Nice video. I’ve installed this on my is250 2012. But the original car radio/cd/aux is not working. Any idea how to fix this?
Honestly I don't use it so I wouldn't know I just connect to Bluetooth
Do you know how to move applications to the main page?
Hold down the app untill it lifts and then it will let you drag it
So you can't change the apps on the main page. You need a launcher that allows that.
After installed mine my hazard light flashing when someone on my passenger seat . Any idea ?
Make sure you plugged everything correctly. Trouble shoot it by doing through each plug until you find which activates it. I had something similar turning on the car. Turns out there was a plug on the amp that was misplaced, once plugged in correctly everything was good.
Unplug the OBD2 connector. did that helps?
If car have original parking sensors so after installation it will be work or not?
Mine doesn't but there are settings for it
I have the same unit how did you get the wireless android auto to work?
It's not perfect I can't always get it to connect but I usually restart both my system and the unit. I delete it from my previous devices list. And I run zlink first and then go to BT and connect from there to the phone. Give it a minute. If not disconnect and reconnect.
Hoping to buy a 250 IS soon. Where can I purchase this head unit please?
It's in the description AliExpress has more spec options too
Thank you
I have a question I just installed this radio and I have the zlink but it asking me to add a credit card it does said 0.00 charge but if it's not charging me why is it asking for a credit card?
That's weird it should activate once it's connected to wifi
Thats a playstore notification. You can skip it or cancel it
Hola cómo instalaste android en la radio original? Gracias
Es un radio Android, el link está es la descripción. Pronto are un vídeo sobre otro equipo.
Does all the buttons work? On the right side of your radio, and the temp buttons left and right?
(Not meaning the fan speed)
You mean separate driver and passenger temps? Yes they work individually, through the physical buttons or the touch screen.
@@mexag720 mmm Nice to know that it is possible to get the physical temp buttons to work. Did you use the obd (canbus) connector to get this work?
What Year is your car from?
Do you have a picture of your canbus box?
Can you make a photo of the canbus / software firmware version? Try to fix this for months.
edit: i See in the first part of this video that you have the same canbus decoder. So i’m happy to find Someone with the same configuration. Maybe the answere on the questions above will help me with debugging.
Do you have a picture of wich cables you use?
@@Marvin1985NL no it's the factory wiring. Technically the non nav is just temp buttons and a display for the radio frequencies. Adding the display moves the buttons around. The OEM nav system is similar to this one. You have physical buttons but also can use the touchscreen.
@@Marvin1985NL the canbus was used but not the obd connector. I have a 2012 model. What problems are you having? xdro720#5827 is my discord
@@mexag720 aha, the physical buttons don't work at my radio. The touchscreen buttons offcourse do work.
Before changing to this radio. I had the basis radio (non nav).
I think we both have the same setup, but my buttons don't work. Maybe it has to do with the decoder. I red that there is an US and Europe version. I live in the netherlands (europe), so maybe that is the case. I have the same decoder HW en SW (software) as you do. I say that number on the video.
I appcreciate your help.
Good to know that the OBD connector is not necessary for the button's to control.
i will install discord on my phone. In nl it's nog widely used.
How did u route the backup cam wires?
I had it done in a shop but when I opened the trunk and was kind of inspecting the work it looks like he ran them through the driver side.
You have 2 options. Or via OBD, or use the wiring method. If you search on 'Android backup camera wiring' you find a lot.
@@Marvin1985NL wiring method is what's used not OBD, plus these units are built better where it detects when you put the car in reverse bringing up the backup camera
@@mexag720 how much did the shop charge you
@@mexag720 how much was it at a shop?
Will it work with is250 with navigation?
Should, if you go into the system settings there's a video format option. I read somewhere the factory backup cam does work.
Is this compatible with the GS also?
I didn't not think so, it's made for the IS
@@mexag720ok gotcha. Thanks
Can you still use CD?
Haven't tried it but it does have an app for that and the Original AM FM Radio but I used the antenna for this android unit. The OEM Bluetooth still tries to connect though.
Is there option for more ram
Yes there is but when I last checked it's more money. The 2 gigs is enough for me.
My IS has the factory navigation with the back-up camera. Did yours? If so, was it a direct swap for the back-up camera?
No mine had the non nav system. But I've read that it can work with it.
You could try connecting it first to see if compatiable or not. If not, then you would need to purchase the decoder for the factory back-up camera to communicate with the Android Head Unit.
Does it support apple carplay
Same question I ask 😂
I believe there is a model that only base android auto, but there like 5 options for ram size that all have Apple car play
Apple car play is flawless Android Auto is a pain at times but I think I figured it out. I'll try to get a video on that soon.
@@mexag720 what about the controls for the ac? I heard it’s a pain in the ass
@@edgarl5453 I got this installed at a shop, I did notice they tapped into the obd I'm not too sure if that may have anything to do with it but mine is working fine wether touch screen or physical buttons
What type of SIM card can I put in this ?
Mine didn't come with an adapter for SIM card but I'm sure any data plan should work. Not sure about 5G but I'm sure LTE
Is this from chyna?
All of these are from china. I just bought some maxed put version with a 1080p screen and 12gb of ram. Delivery is 5 weeks for me in Norway.
@@KK001 how you like it?
How do you change it from freedom units to Celsius for the climate control? 🥲
Did you figure it out? I can let You know if you haven’t
how do you do it
@@philiplee1216 figured it out, theres two options when selecting the luzheng adapter for the lexus IS. choose the one that doesnt say Fahrenheit.
@@ItsDavid07 thanks for that I actually didn't know
Update: I went back to the settings and didn't see that option. Mine is Celsius from factory
@@mexag720 Did you remember how to enable the rear camera? I put mine into reverse and it doesnt switch at all