Behold! My new 3D Printer FINALLY!-but can I even use it?
Вставка
- Опубліковано 19 жов 2022
- This should come as no surprise to any of you, if you have been following along. Thanks to all who gave advice on 3D printers and filament. I ended up going with the Original Prusa MK3S+ because I wanted to start printing right out of the box, and have good product support.
There are far cheaper options with arguably as much capability, but a predictable experience ranks at the top of my list. This is not a hobby for me, it's a means to an end.
In this video, we'll set the printer up, see if we can get it working, and then try and make some stuff of our our!
Free yourself from the algorithm and join us on Substack! 🚲 bermpeak.substack.com
Videos 2 weeks early • Exclusive articles • Discussions • You’re in control!
The Berm Peak Ranger Station on Airbnb 🏡 www.airbnb.com/rooms/50301108...
Prusa i3 MK3S+ amzn.to/3s5oprz
Fork Cork amzn.to/3TDlW31
Berm Peak Hoodies, Beanies, Jerseys, Shirts
cognativemtb.com/collections/...
Want us to review your unique mountain bike or outdoor product? www.sethsbikehacks.com/produc...
Check out our main channel / sethsbikehacks
Follow me on Instagram / sethsbikehacks
Berm Peak Merch cognativemtb.com/collections/...
Instagram / sethsbikehacks
Facebook / sethsbikehacks
Music in this video is from
share.epidemicsound.com/trQSg - Спорт
quick tip : Dust is your worst enemy when 3d printing. it gets on your filament, and then block the small hole in your hotend and you get a clog, which can be a pain to clean.
keep your filament in ziplock bags when not it use, and have it in a seperate room than all the woodworking shenanigans that happens at berm peak !
(don't keep it in an office though. even if it's mostly fine, you don't want to be breathing plastic melting fumes all day long)
i kinda think that what he was teasing at the end of the video is its own printing chamber, for reasons you have mentioned
I actually did start doing this, but to keep moisture out. It's great to know there's another even better reason!
@@SethsBikeHacks moisture isn't really an issue with your typical plastics (PLA, PETG etc...)
Huge issue with nylon for example.
Still it's a good practice though
@@InformatrIIcks PLA will absolutely absorb moisture from the air. I use a food dehydrator if I'm using PLA that's over a year old.
@@rocketappliantist4969 it does, but before it gets to amounts that are an issue to your prints you'll probably have finished the roll.
Sure, if you live in a very humid area and/or keep your rolls for a very long time, it might become an issue, but for normal use in a normal place it generally isn't ...
Prusa is phenomenal. We have two at our office and they were bawked at by the naysayers but every print is flawless. Something to keep in mind, be sure that the direction of print is going to be strongest for the application..for example, if you are printing a clamp around a tube, every layer of the print should be the clamp shape that goes around the tube. once something is anchored, its more likely to fail at the bonding of each layer than it would be to rip the single layer apart. Just something to keep in mind when you think about how you're modeling or laying out the orientation of print. You can also remove the need for support structure if you use chamfers or gussets in some cases. 3D printers can incrementally print into unsupported space. For example, you can print a hole in a plate going vertically because you incrementally open and close the gap. You can also to come degree run a tap into parts if your hole has a large enough wall thickness. You could also just buy brass threaded inserts and heat them up with a soldering iron and push them into the plastic.
For the price, prusa mini, mk3s+ are overrated.
@@No0o0o0o0o0 I'd have to disagree. We had a lulzbot workhorse before and it was garbage. cheap bushings and awful construction. With Prusa, you are paying for higher quality components, 10's of thousands of R+D hours and their software...which if you ask me, is worth all the money. Depends what you're after I suppose! Plus, I mean..you get gummy bears with each purchase.
@@jforrest2140
I have to admit the gummy bears almost had me🤣
@@jforrest2140 To be fair... The software can be used on just about any consumer level FDM printer out there. But I also agree with you on the quality of the Prusa. I may be biased though... My first (and so far only) 3D printer is also a Prusa MK3. 😉
I Shaked hand with Mr. Prusa in 2018 at a 3d conference (back when we still shook hands) he's a great guy and started 3d printing as a trend when he open sourced his designs
Looks great Seth! I do CAD for a living and live 15 minutes away from you. If you want or need to do some more advanced stuff and don't have the time, I'd love to help.
what do you design? and how did you get into that career.
@@slimsqde7397 Not Nick, but I basically live in CAD. Mechanical engineer. Have designed everything from store fixtures to vehicles.
@@SteevyTable how did you get into that career, im pretty interested in doing something like that
@@slimsqde7397 i’m neither the two others, but i’m currently at a university studying mechanical engineering, have already done 2 internships in the field and will have job offers when i graduate. not the most affordable or quick route to CAD and design work but college gives a very solid foundation for understanding the science behind good mechanical design as opposed to a CAD certification or training which will just allow you to be a drafter for other engineers.
@@futsalkeegan thats cool, thanks for the response, how did you get those internships? like how did you find those companies and stuff
i can’t explain how much i love these videos especially when i can’t go on a ride
Oh man. Hope what ever happend gets better
@@snapped4433 it's just raining.
@@torched80 lol
@@torched80 lmao you can still go riding if its raining -- get yourself a muc off jacket I got mine at a silly discount with then being on offer
Oh man, careful so you don’t get too excited about 3dprinting! You’ll end up designing stuff instead of riding 🤪. Love it! You did an amazing job introducing the start/journey most of us have going into 3dprinting. Well done!
Absolute perfect video for showcasing the capabilities of home scale 3D printing. Excellent work
Love 3d printers. And what you are doing is the definition of prototyping. You are using that printer exactly as intended (rapid prototyping) Keep it up. There is so much to learn about 3d printers, even just keeping it limited to the FDM style you have here (and there are so many other types) but keep learning and keep trying stuff!
I am so glad you got into making your own things right away!!! So excited
Super slick!!! If I can get to a point in the future to take on something new, this is definitely top of the list. Thanks for making it feel more approachable 🤘
Dude- you have a great knack for 3d design. It’s definitely not easier to design than print- you just have a talent.
This is basically the reason I bought a 3D printer. I always followed channels around technology but they made it look so difficult. This was the first video I've seen where the subject (You) started the journey from the absolute beginning and made it look approachable. I did not regret my choice. Thank you Seth!
Love it Seth! As someone with a channel built around 3D printing for bikes I am SO stoked to see you dabbling in this.
I love when my hobbies all seem to collide. Been printing for awhile have a couple Prusa's myself and was happy to see this video. Certainly made a good choice with the MK3s+, the thing is a work horse. Always enjoy the content you make, and interested to see where this takes you.
I’m so happy this day has finally come. I can’t wait to see what you make Seth!
Glad to see you finally bought one! There were so many times on the channel where I knew you'd absolutely love it because of how specific you like things to be.
I think it's good that you went with a Prusa, I ended up going the Ender 3 v2 route and spent a good week tinkering things but I was prepared for that, for someone new who wants to figure out the 3d modeling side of things and not the printing side of things, it's definitely the right choice.
For the price he would have been better served with an Bambu lab X1 or X1C. Easier setup, 2-5xfaster prints, more variety of filament types, enclosed, larger build volume etc.
Prusa has been riding the name and the models are showing its age.
perfect for RC accessories and custom parts 😉
It's so cool to see you learning 3D printing! It's one of my favourite hobbies
Haha Seth is slowly combining all my hobbies! Love it, Prusa is great 👍🏻
I love that you post this on the main channel
Wooo! Finally!
Another awesome free modeling software is Fusion 360. Way more advanced, allowing you to get into way more detail. But I still use TinkerCAD like 95% of the time, cause that’s all I really need for what I make xD
Plus, Autodesk makes both of the two programs! So you can use the same account! (Models are not shared between programs)
(Do note that Fusion 360 is only free for hobbyists / personal use. If you’re using it to make money, they have a commercial plan. I would think that if you just mention it and show a bit in a video, that it’s fine. So long as you’re not selling things you design in it. But please read up on that yourself, so you don’t get in trouble with them)
Thanks Seth! I was on the fence on what printer to get and almost clicked on the Prusa a few days again. Love your videos and will be pulling the mountain bike down for some fall riding up here in WA state! Thanks again for all the great videos.
The printer will come in incredibly useful with experience in use. The quick shot of your little one got a smile from me too
As someone who has co-run a 3d printing business.. i am so glad you went with a prusa. Top choice!
Great vid! Your videographical topic choices are awesome and your insights are inspiring. Thank you Seth! Keep up the great vids!
Welcome to the 3D printing club! I've had that printer for several years now and have been very happy with it. Great designs by the way!!
Top tip, on Tinker CAD there’s a setting to adjust the smoothness of the curve on the circle, makes it look less like an octagon! 😉
I've never used tinker cad but was curious when I saw the resolution of his STLs. I might have to check it out.
Yup, came to make sure someone told him this.
Bro Finally!!! Great Seth!!! Congrats on your new equipment!
Solid choice! Look forward to more prints on your channel!
Congrats on your new bundle of joy!
I’ve had the same printer for 2 years and absolutely love it. It’s been dead on reliable say for some adhesion issues with PLA but I almost always use PETG so it doesn’t really matter. Your cad program of choice will be open on your computer for the next 6 months as every problem you encounter will be solved with 3d printing.
Love that you jumped straight into CAD modeling. Me? I spent weeks printing plastic boats and knick-knacks.
Fusion 360 is a big boy CAD software that has free a "hobby" license so you could look into that if Tinkercad isn't cutting it anymore.
I still use TinkerCAD for like 95% of my modeling xD
Most of the things I need to design, are just fine with low-poly methods. But when I need something more complex, F360 is my go to.
Love this! Thanks so much for showing us the process!
It's entertaining to watch you, Seth, learn about 3d printing and CAD
Great Job Seth!!! More Fun projects to come!!!
Extremely clever ideas seth!
welcome to the 3D printing club! the Prusa is awesome, been loving mine ever since i got it in 2019!
Damn Seth your content just keeps improving! Great job with your development and work, a friend and a fan from Mexico
I have been studying 3d design in school for a couple of years now and still for 2 more, really love this field of study
The Prusa is a good choice. A bit pricey but really user friendly. While I prefer the cheaper options like the Ender 3, you can't beat the Prusa in reliability.
I love tinkering and 'improving' my cheaper printer though.
The Prusa MK3 line (MK3 MK3S MK3s+ etc) is pretty easy to mod. MihaiDesigns is probably one of the best examples of doing this with his PitStop 1 and PitStop 2 extruder replacements.
@@CaptainNomae I know they are. They have a huge community. I just like to save money :)
Ender 3 is shit
That's a game changer tools for evryday day tinkering. It boosted creativity for lot's of us. Love your video.
Hi Seth, I was actually super excited to watch this video when I found out you got a Prusa 3D printer. I actually have 5 of these exact same printers and I can tell you that you aren't going to find ones any better for that price. These printers work amazing and I'm super happy you chose Prusa because their customer service is great too. A couple of few for you, if you plan on making parts that are actually going to live on the bike, I REALLY recommend using ASB filament. It's just a little bit harder to print, but it's way stronger. Also, when printing towers like the original CO2 holder, you should use a ~2mm brim instead of supports, and that will prevent your tower from falling over. Also, TinkerCAD is a great software for making 3D models, especially when you're new to it, but to prevent the jagged edges on all of the cylinders you created, you can go to the options once you drop in your cylinder, and increase the number of sides to make it much smoother and closer to an actual cylinder. Anyway, glad you bought a Prusa 3D printer and I hope you have a lot of fun with it!
Hey, So happy to see one of my favortie channels getting into another favorite hobby of mine,
I always loved your videos, and now i like them even more! Also you got the same printer that i have. You wennt the easy way and got it pre built lol. I had to build it myself. But it's a great printer, and you made a good choice. I hope to see more videos about it in the future.
I'm stoked to see what the 3d printer brings for the rc content!
The 2 things I love the most in one Video: Bikes and 3d printing :D
This video was actually really cool, It's so cool how much Berm Peak (Seth's Bike Hacks) has grown!
We just got a similar one in school last thursday. Cant wait to use it
You should really look into Filaments, depending on which one you use for a specific application it could be quite dangerous. PLA for example is great for prototyping, its cheap, easy to print and environmentally friendly. But its bad with heat, sun rays and pressure. could lead a stem spacer for example to slowly compress unter the tension from the stemcap and lead to a quite dangerous, unstable bike. You might want to use ABS or PETG for that then.
Keep up the great content, loving the newer stuff :)
Your stem clamp bolts does the vast majority of holding the bars to the steer tube. If you've torqued your stem bolts properly, a properly torqued stem cap shouldn't even be able to move the stem; otherwise, your bars would move out of alignment.
@@MrSatchelpack yup. Holding the stem to the steerer. But the spacers are vital for clamping the fork and stem tightly to the frame and headset bearings. If your spacers get compressed, your steerer will shake around in the headset
@@dermax_hd Even if this were to happen, I fail to see how this is dangerous. When bearings go bad and there is slop, you replace them. It also doesn't mean you can no longer steer. To say that it is "quite dangerous" is a stretch.
@@MrSatchelpack It might be, depending on how severe the fail is yeah. fact is: plastic is less strong than carbon or alu, and if it were to fail catastrophically even stem spacers would be rather bad.. so thats a spot I wouldnt rely on in plastic.. for a CO2 cartridge holder, 3d printed plastic is just about perfect tho. plenty strong to hold such a small weight, and even if it does fail, it wont lead you to crash or something.
Man, welcome to the club! It definitely is addictive to start making your own things, haha
3D printers are amazing at solving those very specific problems that you can't find in forums. Whip up a part, wait a few hours, and you're happy!
Prusas are truly amazing workhorses. You won't be disappointed!
Wow another banger. Keep the good work up Seth.
I'm really impressed you did so well so fast. CAD, 3DP, and 3D Scanning is my career.
This is amazing. I'm impressed with you! Keep it up!
That's a great machine. It is a work horse! Give it love and it will treat you right!. Nice job
Congrats Seth!
Congrats - 3D printing is the gift that keeps on giving.
welcome to the 3D club! awesome to see tinker cad, i love using that for quick simple designs!
I recommend making a 3d printer enclosure if you plan on printing filaments like nylon or abs etc. The enclosure will stop slight gusts of air from tampering with the part and looks cool. I recommend the ikea lack table enclosure. Also for print settings, I like using the honeycomb or 3d honeycomb.
For sure! For those even too lazy for a Lack enclosure, I find that printing a shield can do a lot too, especially manually modeling one and having the slicer add another-- belt and suspenders ;)
Cardboard box and photo light box can make good enclosures too!
Dude your video content is always on another level. Well done
Love the video man, your content is always good stuff.
Great choice Seth! I love mine.
Hi Seth,
Love your videos! And love that you are already enjoying your printer!
It looks like your parts might benefit from refining the angular tolerance when you export them (presumably to stl files?). Essentially your cylinders look like they have facets rather than being round. I'd even guess they have 36 faces because your CAD software is probably placing a corner after every 10 degrees of curvature on the round surfaces.
Fixing this may help with things like the fit around your CO2 canister. Depending on the CAD software you're using, there's probably a box in the export window. You can set and forget this at 1 degree, your parts will be super round forever!
Looking forward to seeing the next creations!
Lovin the fabricobbeling.
This is literally the best UA-cam channel ever, watch it since I was a child
Finally one of us, Mountainbikes and 3D Printers, perfect combination!
Super cool vid! Keen to get one and try some stuff out!
Great video! Most of my experience with a 3D printer is using one at work as a mechanical engineer. So I haven't used Kindercad or whatever. But I can tell you if I had one at home I'd probably be doing just what you're doing. Make a low-res proof of concept, then make a nice one. (PS you can literally bondo/sand/paint prints if you want a smooth surface). An area we used them a lot for at work was jigs an fixtures, which I could see being beneficial for you. For instance, you can make a hexagonal recess! Basically impossible to machine... but we would make a base with a couple holes in it and hex recesses on the back. Shove a nut in the recess, and bolt a toggle clamp or something to the top thru the holes. Done. Perfect fixture for drilling or milling a part or whatever. You could make some sweet tools with it as well as parts!
Hello from Spain, thank you very much for adding the subtitles in Spanish, if I already liked your channel before, now I will enjoy it much more. By the way, I am using the Google translator.😂😂
Prusa was a very good choice! More printing less careing! Nice to see ideas for bikes 👍🏻👍🏻👍🏻
Woah! I’ve been wanting a 3d printer for years and finally bought one last week and now you have one too! Coincidence? I think not! ❤
Allways a great day when Seth uploads
Love it!! Great video and can’t wait for more
Welcome to the community Seth like to see what you do with the printer.
I've been 3d printing for 2 years and can say it's more complicated than it looks but when you get the hang of it, It's the best. I use cura 5 for all my prints and it's 100% my favorite slicer I've ever used
Prusaslicer is also really good, especially with recent updates.
Super cool! More like this!!!
This is so cool mate!
This rekindled my interest in 3D printers. I'm sure I can find many uses around the house, car, and photography bag.
You made a great choice for your printer. People give Prusa crap about the higher cost for an older design, but the fact of the matter is that they just work, and work well right out of the box with about as minimal tinkering as possible (for a 3D printer). My first printer was one of the cheaper ones that was given to me as a Bday gift from my wife. Awesome gift, but the problem was that I spent more time tinkering with and tuning the printer than actually printing stuff...and the print quality was still mediocre at best. Picked up an older Prusa MK2S used and it's been SO much better. Better quality, better speed, and it just plain works.
Loved the video though, and definitely looking forward to seeing what else you use it to make in the future...
Fun to watch! Hope you’ve got a good recycle plan for all the non-usable parts😉♻️
omg yes! so much cool things to print for a bike! on of the first things i printed was a mudflap & wheel air cap's
Man, that’s so dope! 🔥
This is awesome! I designed and printed my grips from flexible material with internal ventilation/moisture channels. They are great and highly durable!
Oh, and props for the steep learning curve! TinkerCad is awesome and you can also use it for your crawlers
Did u post the model anywhere?
Really cool video man!
Always legit content, thank you good sir!
Lol it's fun to watch new people get into 3D printing. Been into the hobby for a few years now. Have some Prusas and Enders. Looking into getting a good resin printer now.
Hey man, just wanted to say thanks for your content. I've watched so many videos in the last two weeks, it's great. You're a large part of why im getting into mountain biking now at 28, husband and father to two kids. I rode Park when I was younger, had a S&M LTF with all the goodies. Got the mountain biking idea from coworkers at my new job, in a new state I moved to. Researched and ended up watching a few of your videos, thought about getting the Trouvelle* off your recommendation. Ended up finding a 2021 GT Avalanche Black Edition(I think its called) With some work, nice bars, grips, saddle. Looking for a bike for my wife now too, so we can ride the trails together on weekends. So anyway, now that I wrote a story, thank you for helping inspire us. I cant wait to save money and upgrade little by little. Dropper post and 1× conversion going to be the first things.
Congrats 🎉🎊
Been waiting for this day forever
i'm impressed that 3d printers have enough resolution that you can actually thread something on. i've always wanted to 3d print a mount for my phone. i sit in traffic a lot on my commute, and want to put my phone in the gap above my steering wheel so i can scrub through a video. i'm mainly just listening to the audio but i use the visual to know what part i'm scrubbing to
Seeing the successful Czech company on your channel warms my heart.
Woohoo! Welcome to the 3D Printing fam 🙌🏼🙂
Glad to welcome you to the 3d printing community :)
Awesome video. Would like to see more of your tinkering with it.
Ive got a Prusa MK3s as well, you cant go wrong.. they just WORK!
Glad you bought a Prusa! I use 5 for my small business.
Couple of tips, I've been 3d printing for a while.
Tinkercads great, but as you get better, making complex designs takes dramatically longer. Try onshape, it's a new and very different approach to design, but for your applications it's definitely worth it. Onshapes free, and browser based just like tinkercad. You can also eliminate the polygon like patter or cylindrical objects.
If your not Interested that's completely fine. Last tip is with cylindrical objects in tinkercad, you can eliminate the polygon like pattern by increasing the amount of segments you have. You will find this in the same tab as group and ungroup.
Have fun!
Yeah, OnShape is the tool to use if you are Ok with your parts being public. It is incredibly easy to use and the built in versioning is super useful.
+1 for onshape
Fusion 360. Makes workflow easier too. It's a learning curve, but well worth it.
Agreed. I use Onshape all the time. It takes a couple of days to get used to, but after that it's A LOT better than TinkerCAD. Worth the investment.
McMaster Carr has the stl and Solidworks files for 90% of its products. I 3d print tools hinges etc from there all the time.
Tip. In thinkercad you can increase the cylinder resolution to get smooth round cylinder when printing.
Came here to say this. Increase the "Sides" slider. No idea why they still have it defaulted so low, computers these days can easily handle modeling more facets. lol
Second! So glad you finally bought one. I can’t wait to see the cool things you’ll make!!!
You said it was the closest thing to prototyping, but we call that rapid prototyping where you just quikcly and cheaply manufacture parts to see if the concept works before spending money on the full build, awesome stuff!
Impressed! You learnt a lot in a couple days! I love Prusa 😀
I love designing bike parts. But also check online 3D prints libraries before designing yourself (someone super talented might have already made the part).
One caution once you start making parts from Nylon, PTE, Carbon, etc make sure to have an enclosure and good ventilation. PLA is less toxic and easy to use but it's less durable and strong.
Can’t wait to see what you do with it
So glad you finally got on the 3D printer train! It's a wild ride for sure and a great match with mountain biking. And when you do outgrow tinkercad, Fusion 360 is the next big jump (with an associated learning curve!) It's free for personal use but they make it seem like it's only free for 1 year. It's not, they just don't tell you how to renew the free plan.