Це відео не доступне.
Перепрошуємо.
Playing with Indium Tin Oxide
Вставка
- Опубліковано 14 бер 2013
- We got some new ITO samples, Becky Stern experiments with them by lighting up some LEDs on this clear material!
-----------------------------------------
Subscribe to Adafruit on UA-cam: adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: adafru.it/showtell
Watch our latest project videos: adafru.it/latest
New tutorials on the Adafruit Learning System: learn.adafruit.com/
Music by bartlebeats: / bartlebeats
Connect with Becky:
/ bekathwia
/ bekathwia
-----------------------------------------
Awesome info! Thanks Becky! Love all your builds!
Always enjoy listening to what you folks are upto :D
Quite amazing
That rocks. I can so see building a rainbow led collar for our Beagle for Christmas time :-)
you are amazing as ITO as well : )
Could you create clear capacitors with this material? I'm looking to make a large plat capacitor and if I can make it clear it's going to look so much more awesome.
Hot damn, also, I want your job. So much clearer than in dry academic papers about invasive neural probes.
I HAVE TO HAVE IT!!! I'd love to see a ATTiny45 or similar on it.
I've been waiting for this all my life technology is finally at its peak we, must used it for our advantage :) I am so amazed on what we can do! Keep up the good work!
Interesting. Cheers
I want to see traces milled out of this stuff via CNC. Exciting possibility for a see-through LED matrix if done right.
looking into making complex traces on ITO. maybe this can be etched like with standard circuit boards?
You have a fun job. :)
Wondering about the resistance and how much current it'll take.
There is a way to make that without going to great expense..
You can buy clear wood varnish water it down with thinner and add tin or aluminum powder then using a paint sprayer coat thin bits of plastic..
Ive done it and it works... Give it a try... ;)
What brand of conductive ink did you use?
"Ladyada" i'm going to try this on glass large glass 400mm cylinder any tips
i want some!!!!
can ITO be evaporated on glass surface by vacuum coating process?
indium is in short supply, so wouldn't recommend making curtains with it. Wait a few years, and Graphene will probably be suitable for that.
hello, can you explain better how to do with the ink pen?
thank you
Now that would be a neat if you could etch it and make a flexible "pcb" at home.
I don't think ITO is deposited on glass or plastic by spin coating. I wish it was, but I'm 99% sure it's a much more complex and expensive process.
yea sure
Would it be possible to heat and reshape it without losing the conductivity?
interesting material, conductive collar stays
This is curious. can you print the ITO like a PCB?
This might be a nice way to make 3D LED objects (Im keen on the cubes). It seems to me that if they circuit was printed, you could screen print the conductive glue, and place the parts with standard SMT equipment and techniques, and end up with nice even planes of multiplexed or charlieplexd LEDs. The matrices can easily turned into cubes by layering, but because they are flexible, they could be turned into many things (headband, bracelet, ...)
since you commented this 10 years ago you might be dead but you could do what you described with physical vapor deposition
The big question is, is it laser-etch safe? Either the plastic or the glass-coated variants?
leds are pretty
Where can I buy this?
You guys have transparent aluminum?
Time to order...
As an artist i would not print but carve in this layer in order to create the conductive paths
what is conductive ink name?
Is that expensive material? Might be too expensive for invisible LED curtains...
I believe ITO is sputter coated and not spin coated
James Fallon the Pet fillm is cooling by spining at high rpm and it is not placed in the same chamber of sputtering ,
the ITO particles comes trough a tube from a near chamber , in this way it is possible to coat substrate with ITO but at low temperature ...
i wanna know how to make pattern and etch the ITO PET chemically , not using Laser DPSS machines
fuck yes! i mean, not me.. but i've heard...
Please, for future reference consider doing without the background music on spoken parts. It makes it harder to follow the spoken word.
Ill also take the chance to thanks you guys for making materials and products like these more easily available.
Thanks
Hi .
🌈
it's a nose ring
Dog/cat collar for at night.
clear PCB anyone?
"new"
used for touchscreens all over the world. Instead you can also use:
Fluorine tin oxide, aluminium doped zink oxide, or antimony tin oxide.
and of course there are many more...
lo que se dice "una narigona bien"
PFFFTTTT.
shes cute
Lino Beltran that nose!
images.sunlive.co.nz/images/candc/CC-tauranga-vets-march-2015-02.jpg
Yes I do think she is hot, I also find Limor to be hot.
nice.love your pierced nose on a hot girl !