@@FPVUniversity sorry if someone has already asked but I'd like to know how to let the flight controller know I'm running props out. In betaflight it's just flip the motor direction tab.
Awesome news! INAV is better than ever from what I can hear, can't wait to get full Smart Audio support though because that's key for us, quadcopter users, when we want to tune our quads on the field, and also for changing VTX power and channels too on the fly, and even camera settings. It's a huge quality of life improvement overall.
i'm building my first inav quad once my parts get here, i'm excited for 2.5. I've flown ardupilot forever and betaflight for a few years. Thanks for all the work.
Thanks. I updated my 7 inch quad from 2.4. It flies like a dream on default pids, really a big improvement here. RTH works a little better on ardupulot. For small quads
Improvements: 05:30 Multi rotor flight performance and Filtering 06:50 Navigation using rudder on airplanes. 07:37 RPM filters 08:24 Logic conditions, Global Functions and Global variables 09:28 Reversible motors 10:28 Rover and Boat support 11:54 Navigation engine improvements: Jump, Land and PosHold time for waypoints 12:37 Improved VTX handling 13:00 INAV is faster 13:25 ESC temperature on OSD and Blackbox 14:12 SBUS stream output for all servos 15:25 What's next
My first Inav plane is flying a 3 yo version,,, lol it works great always has. and won't update now.... But I'm about to make a new Inav plane with help from you and 360painless... Just wanted to say Hello and Thanks for all the work.. Come fly with me in California some time...
I didn‘t even know sbus to pwm converters where a thing... im running the matek f405 and don’t have enough servo outputs so i‘m currently using some of the pwm outputs direct from my receiver for things like pan/tilt. I immediately ordered one of the converters. Being able to control those functions thru the fc is AWESOME! Thanks to all the nerds who keep on improving my beloved iNAV :p Great work guys!
👍👍😊 Very nice !! P.S. Totaly understood the priorities - but please let me know how much beer, juice, pizzas (or what else?) is required for your family to let you film updated plane config..😉
Thank you Pawel for your continuing info on Inav. I just got into Inav and I'm using 2.5.2 on my Omnibus F4 V3. I have a M8n GPS connected and working, I can get as much as 22 sat here in Alberta Canada. I have only 3 channel setup for my Spectra Glider, Throttle, Elev and Ailerons (working as Rudder). When I go into Manual Mode and test servo movements, Rudder and Elevator has full deflection, but as soon as I flick the Arm switch, the Elevator deflection becomes small (about 30% only), but the Rudder (Aileron) remains at full deflection. What might be causing this to happen? I reviewed all mix and read a lot of manual regarding setting, I can't seem to find the solution, Is there a hidden Throttle mix that I can't see? Can it be just a very minor tweak that I fail to setup? Thanks a lot.
Hi, thanx for this so far. Just created a Tyro129 with a lot of long range parts. Already watched the stuff Joshua did about INav, but I thing it is better to get it directly from the source :) So looking forward. Seems that you will begin again from the scratch with 2.5? I´m an absolute rookie about INav... sbasibo :)
I have a 7 inch quad waiting for Inav 2.5. Should I flash the release candidate or wait a few days? It's going to be a Project 399 Practice Rig on Brotherhobby 2510 motors. Matek F722SE and Matek GPS and compass board. Crossfire and analog video. It is going to be a heavy quad. A cruiser lugging 6s 1800mAh batteries. Maybe a 2200mAh. Sometimes, a 4s 5000mAh.
Were issues of unstable flight in GPS Cruise mode for multirotors finally fixed? on firmwares from 1.9 to 2.2 this mode was totally unusable and the quad behaved itself unpredictably after doing turns in this mode. I reported those issues several times on github but never had a sufficient feedback from the developers.
I am in the process of setting up a 110mm/2.5" whoop style quad for sport and camera use (no racing, no freestyle). I want it to be as stable and easy to fly as possible (good "position hold"). The FC is a Matek F411-mini-se with barometer for ALTHOLD. The firmware is 2.4, and there is no 2.5 level firmware available yet. My question is, should I stick with configurator 2.4.1, or would it be to my advantage to switch to the 2.5 configurator? Thanks!
Read comments below on my experience with a spastic 10" 2.5RC1 nothing was restore from previous version of iNav, just setup quad mixer, 10" preset, manually the modes (just arm on ch5) and always arm on ch 6, crossfire on ser 2. nothing on filters and angle to 55, pids and all came from presets.
Hello Pawel and everyone, just updated my Kakute F7 HDV, on the receiver tab, all the stick output are correct and working, but if I plug in the battery and arm the quad, I only get throttle output and the rest such as Roll, Pitch, and yaw are not working. What am I missing here?
Will you be able to change motor mixes as well as servo mixes using logic conditions? I want to set up differential thrust so that I can switch it off when not on the ground.
Hi Pawel, great video, very informative. I've just watched a video by Rob Thompson and he is suggesting using iNav on a 7" quad. I'm currently flying Betaflight 4.2 on a Furious Racepit FC. Never looked at iNav before, is it possible for me to use ? Iflight XL7, Furious Racepit FC, Furious 4in1 ESC, BrotherHobby 2507 1850 motors I've been flying FPV for a few years both fixed wing and quad so not totally new to the hobby .....
Lol, just flashed it and converted the aux mapping by hand... 800khz i2c etc.. motor idle to 10%.. fiew, that is a big change, i guess it is necsesesary! nice work Pawel! Thanx about the warning, might start from scratch now.. maybne an option to save the settings you allways use, like a diff light or something would be nice. This goes for betaflight and cleanflight also
I've been flying with inav 2.5.0 for awhile now but noticed that the heading-bearing of the model is way off according to a compass, what could be causing this? is it a opentx issue or inav? Thanks for video
Panel, please help. I purchased the matek f722, Installed 2.5. I checked cli and yes 2.5 is installed. The problem is , I have no sensors working, so I can't calibrate. Is there a step I missed?
I installed INAV 2.5 and it looks ok, but now I realize that 2.5x firmwares also is required. Sadly F7 INAV Target MATEKF722MINI is only at 2.4 , so do I revert back to 2.4 and wait for Matek to produce the 2.5 ? I build 3 inch quads so finally two 3" presets. Generally tendency is quad are downsizing, 16x16 boards with sda/scl, dual cams, 9v and 5v becs and F7 chipset do very well in a Dual cam, GPS-Compass-Baro-Lidar three inches drones. A lot more nibbler, faster in corners, less damages on crashes, and can hold GPS pos in windy conditions.
Hi! Pawel Do you know why 2.5.0 RC1 work from the aplication file and not from google apps, and why 2.5.0 RC2 don't have aplication file in unziped folder? And why these versions dosen't work from the google APPs place as extensions. Now i have 2.5.0 RC1 working whith maps!! Thank you.
Is it possible to create a customized OSD interface? I'm not talking about moving text around, but including graphic elements like a "remaining power" bar, and things like mapping and changing battery voltage to % through code. I'm using the DJI digital FPV.
if i roll the drone to left the rudder from back it will counter to right that correct? if in 3Dcruz modee if the wind from left the rudder also will counter to right?
Hi Pawel is suitable install inav 2.5 to a big multirotor 15 inch no esc telemetry? I flown for one year with inav 2.2 on it in gps modes and is not so bad!! But im interest on timed position holding and the new climbing rate between wypoint. Ciao!!
Hi! Are Matek optical flow and lidar sensor work in 2.5? I see it work in sensors but i not feel it work in air. And trimming by sticks not work. Thank you.
Hi, I used to fly drone, and I start to pilot wings. Inav is great. I want to try Inav on an old drone. Is it possible to use rth mode with matek f405 and GPS without magnetometer? Thanks
I have a question..after just losing my Ar900 5mins ago...due to low battery. Is there anyway you can configure your craft in i-nav to automatically RTH once the batteries get to a certain percentage?.. thank you.
Hey I wanted to use inav so bad. I bought a gps module with a compass set it up flashed the firmware set everything up with inav, calibrations, ports, configuration,gps,motor protocol,modes,failsafe, etc only to find out while flying that none of the features (gps rth, pos.hold, alt hold, altitude in osd) will work without a barrometer. No Warnings or any thing good thing I was testing when I activated it, it crashed into the ground There are only 3 flight controllers on the market that have a barrometer and (there is a ton of issues adding a barrometer to a fc)the mamba fc's are Not one of them why not include a message saying no barrometer found. all green checks to the right in inav 2.5 were green Just passing on my experience I guess when I build another one in probably a year I will get to try it that really sucks over a $3 part or rebuild my entire flight controller why not allow us to pick which side is the forward/ the front or even make us calibrate it by flying forward in a straight line for 200 ft or something similar while in calibration and call it a day and use the same programs that planes do. I am tempted to add it as a plane with 4 motors
they were never enabled by default. They are still available in the CLI is somebody really want to use them. Still, with new filters there is not much sense to use them at all
Absolutely epic work, thanks Pawel and team. I've been waiting for this for a long time! Tell me, would we be able to use the gyro for the rover steering for instance, for drift auto correction? I know its not the point of inav, but its a very quick way to get iNav onto almost any RC car, steering stabilisation, steering, throttle and brake Rates.
this is what PID controller does out of the box. Steering goes through PID and if gyro detects rotation it will try to correct. Strength might not be super high but can be tuned
hi friend i'm new to this rob i'm trying to configure inav 2.5.0 and the htr option is not in flight modes i would like to configure you could help me the controller board is omnibus f4 pro v2
Is the 2.5 configurable through Chrome app? I can't get the executable version of the configurator to run on my PC, only Chrome app version works. Don't know why.
I'm having a similar issue. it has something to do with chrome reading "_" files. i was able to get it downloaded and opened by changing the name of "_config" to "config" but its def not happy and it wont function at all like the configurator should. its all code-y and junk lol. gonna keep pecking away.
and make video air plane tuning :) and setup, much changes have 2.5 i watch last video and hard to find it still usable instruction in 2.5 from you old 2.x versions videos
@@jcfpv3454 Yeah, not a good excuse. You can still do plenty with a GPS module+compass. If its not supported then they should take it off the site and remove it from the configurator.
Hey Paweł, I appreciate your contributions but how about some bullet items. I have no idea where you're going with this discussion. It's meandering and intractable.
Dude, you guys are crushing it on iNAV. Very, very cool!!
one can try
@@FPVUniversity sorry if someone has already asked but I'd like to know how to let the flight controller know I'm running props out. In betaflight it's just flip the motor direction tab.
Awesome news! INAV is better than ever from what I can hear, can't wait to get full Smart Audio support though because that's key for us, quadcopter users, when we want to tune our quads on the field, and also for changing VTX power and channels too on the fly, and even camera settings. It's a huge quality of life improvement overall.
Today I flied with inav 2.5 it made me feel how butter smooth fly is. Its great even in windy conditions.Thank you.
i'm building my first inav quad once my parts get here, i'm excited for 2.5. I've flown ardupilot forever and betaflight for a few years. Thanks for all the work.
Great overview! Thanks Pawel...
I tested iNav 2.5 in a 30mph windy day and it flew awesome! I’m updating all my quadcopters! Thank you Paweł and iNav team! You the best! 🔝🔝🔝
Did you have any issues downloading and unpacking the extension files?
Great job! I'm very excited to see the Rover set up video and to test out the logic conditions.
Thank you so much. You´ve got a new Fan!
Here and already with a huge bag with esc telemetry. Nice...
Thanks. I updated my 7 inch quad from 2.4. It flies like a dream on default pids, really a big improvement here. RTH works a little better on ardupulot. For small quads
I am getting to like you More and More and more and.........:) with all respect to the MAN him self :)
Thanks for notifying! supper excited to try that!
I did try 2.5 omnibusf4v3 after installing do yaw spin violently. What i should do now?
Improvements:
05:30 Multi rotor flight performance and Filtering
06:50 Navigation using rudder on airplanes.
07:37 RPM filters
08:24 Logic conditions, Global Functions and Global variables
09:28 Reversible motors
10:28 Rover and Boat support
11:54 Navigation engine improvements: Jump, Land and PosHold time for waypoints
12:37 Improved VTX handling
13:00 INAV is faster
13:25 ESC temperature on OSD and Blackbox
14:12 SBUS stream output for all servos
15:25 What's next
Thanks a lot mate!
Very nice release Pawel 💪🏽 thank you very much!!
Waiting for complete 5" & 7" multirotor tutorial for inav 2.5. I hope u in healthy always, thanks before.
My first Inav plane is flying a 3 yo version,,, lol it works great always has. and won't update now.... But I'm about to make a new Inav plane with help from you and 360painless... Just wanted to say Hello and Thanks for all the work.. Come fly with me in California some time...
I didn‘t even know sbus to pwm converters where a thing... im running the matek f405 and don’t have enough servo outputs so i‘m currently using some of the pwm outputs direct from my receiver for things like pan/tilt. I immediately ordered one of the converters. Being able to control those functions thru the fc is AWESOME!
Thanks to all the nerds who keep on improving my beloved iNAV :p Great work guys!
Thank you, I look forward to using soon with my XOHD XL build. 👍🏻
I will be doing the same build!
running inav 2.5 on sp f3 FC for my diy delta wing, it works perfectly.
Looking forward for a 7” long range multirotor setup for inav 2.5 ✌️
You d'man, Pawel.
Thanks!
Thanks Pawel.
Thank you! Thank you! Thank you!
Hello pawel ,, does this inv support
VTOL ?
Wow cool, thank you!
excellent news, i will try the rover setup in a 1/10 rc car!!!!!
👍👍😊 Very nice !!
P.S.
Totaly understood the priorities - but please let me know how much beer, juice, pizzas (or what else?) is required for your family to let you film updated plane config..😉
Please VTOL for INAV
@TheGladeUp I think he meant tail-sitter airplane.
Dziękuję bardzo
Thank you Pawel for your continuing info on Inav.
I just got into Inav and I'm using 2.5.2 on my Omnibus F4 V3. I have a M8n GPS connected and
working, I can get as much as 22 sat here in Alberta Canada.
I have only 3 channel setup for my Spectra Glider, Throttle, Elev and Ailerons (working as Rudder).
When I go into Manual Mode and test servo movements, Rudder and Elevator has full deflection,
but as soon as I flick the Arm switch, the Elevator deflection becomes small (about 30% only), but the
Rudder (Aileron) remains at full deflection. What might be causing this to happen? I reviewed all mix
and read a lot of manual regarding setting, I can't seem to find the solution, Is there a hidden Throttle
mix that I can't see? Can it be just a very minor tweak that I fail to setup? Thanks a lot.
thanks Pawel!
Hi, I watched your FW setup videos (p=0, gyro filter=20 etc...), is the new Matrix Filter worth enabling on FW? RC2 has it off by default. Thanks!
Hi,
thanx for this so far. Just created a Tyro129 with a lot of long range parts. Already watched the stuff Joshua did about INav, but I thing it is better to get it directly from the source :) So looking forward. Seems that you will begin again from the scratch with 2.5? I´m an absolute rookie about INav... sbasibo :)
I have a 7 inch quad waiting for Inav 2.5. Should I flash the release candidate or wait a few days? It's going to be a Project 399 Practice Rig on Brotherhobby 2510 motors. Matek F722SE and Matek GPS and compass board. Crossfire and analog video. It is going to be a heavy quad. A cruiser lugging 6s 1800mAh batteries. Maybe a 2200mAh. Sometimes, a 4s 5000mAh.
Were issues of unstable flight in GPS Cruise mode for multirotors finally fixed? on firmwares from 1.9 to 2.2 this mode was totally unusable and the quad behaved itself unpredictably after doing turns in this mode. I reported those issues several times on github but never had a sufficient feedback from the developers.
Thank you!
I am in the process of setting up a 110mm/2.5" whoop style quad for sport and camera use (no racing, no freestyle). I want it to be as stable and easy to fly as possible (good "position hold"). The FC is a Matek F411-mini-se with barometer for ALTHOLD. The firmware is 2.4, and there is no 2.5 level firmware available yet. My question is, should I stick with configurator 2.4.1, or would it be to my advantage to switch to the 2.5 configurator? Thanks!
Read comments below on my experience with a spastic 10" 2.5RC1 nothing was restore from previous version of iNav, just setup quad mixer, 10" preset, manually the modes (just arm on ch5) and always arm on ch 6, crossfire on ser 2. nothing on filters and angle to 55, pids and all came from presets.
Hello Pawel and everyone, just updated my Kakute F7 HDV, on the receiver tab, all the stick output are correct and working, but if I plug in the battery and arm the quad, I only get throttle output and the rest such as Roll, Pitch, and yaw are not working. What am I missing here?
Will you be able to change motor mixes as well as servo mixes using logic conditions? I want to set up differential thrust so that I can switch it off when not on the ground.
Hi Pawel, great video, very informative. I've just watched a video by Rob Thompson and he is suggesting using iNav on a 7" quad. I'm currently flying Betaflight 4.2 on a Furious Racepit FC. Never looked at iNav before, is it possible for me to use ? Iflight XL7, Furious Racepit FC, Furious 4in1 ESC, BrotherHobby 2507 1850 motors
I've been flying FPV for a few years both fixed wing and quad so not totally new to the hobby .....
Lol, just flashed it and converted the aux mapping by hand... 800khz i2c etc.. motor idle to 10%.. fiew, that is a big change, i guess it is necsesesary! nice work Pawel! Thanx about the warning, might start from scratch now.. maybne an option to save the settings you allways use, like a diff light or something would be nice. This goes for betaflight and cleanflight also
ok, just did it from scratch with only safe CLI settings... Thanx for the warning, I can't wait to maiden this one!
I've been flying with inav 2.5.0 for awhile now but noticed that the heading-bearing of the model is way off according to a compass, what could be causing this? is it a opentx issue or inav? Thanks for video
Panel, please help. I purchased the matek f722, Installed 2.5. I checked cli and yes 2.5 is installed. The problem is , I have no sensors working, so I can't calibrate. Is there a step I missed?
I installed INAV 2.5 and it looks ok, but now I realize that 2.5x firmwares also is required. Sadly F7 INAV Target MATEKF722MINI is only at 2.4 , so do I revert back to 2.4 and wait for Matek to produce the 2.5 ? I build 3 inch quads so finally two 3" presets. Generally tendency is quad are downsizing, 16x16 boards with sda/scl, dual cams, 9v and 5v becs and F7 chipset do very well in a Dual cam, GPS-Compass-Baro-Lidar three inches drones. A lot more nibbler, faster in corners, less damages on crashes, and can hold GPS pos in windy conditions.
Hi! Pawel
Do you know why 2.5.0 RC1 work from the aplication file and not from google apps, and why 2.5.0 RC2 don't have aplication file in unziped folder?
And why these versions dosen't work from the google APPs place as extensions.
Now i have 2.5.0 RC1 working whith maps!!
Thank you.
Is it possible to create a customized OSD interface?
I'm not talking about moving text around, but including graphic elements like a "remaining power" bar, and things like mapping and changing battery voltage to % through code. I'm using the DJI digital FPV.
So is it suggested to run both rpm filter & matrix filter simultaniously or run either one only?
if i roll the drone to left the rudder from back it will counter to right that correct?
if in 3Dcruz modee if the wind from left the rudder also will counter to right?
Is there a way to have a switch to ready a WP mission? Or a way to tell if the WP mission is loaded when you are powering up.
In a fixed wing (s1100) I copied modes from a diff all from 2.4
I should full chip erase or is enough set the modes again in this 2.5 rc2?
Thanks a lot for video! When will it be stable version for Matek F405CTR?
recently 3D printed an air boat, might try throwing an old FC and GPS on it and look into the Nav stuff :)
Hi Pawel is suitable install inav 2.5 to a big multirotor 15 inch no esc telemetry?
I flown for one year with inav 2.2 on it in gps modes and is not so bad!!
But im interest on timed position holding and the new climbing rate between wypoint. Ciao!!
Расскажи лучше,что при применении присета на 3 дюйма ,дрон начинает крутить вокруг оси как сумашедшего
'sail'' is correct
Maybe do a choice for boat on RTH, choice strait or by track?
Hi! Are Matek optical flow and lidar sensor work in 2.5?
I see it work in sensors but i not feel it work in air.
And trimming by sticks not work.
Thank you.
Hi, did you ever think about to increase navigation precision by adding two gps option ? Thank you.
Hi, I used to fly drone, and I start to pilot wings. Inav is great. I want to try Inav on an old drone. Is it possible to use rth mode with matek f405 and GPS without magnetometer? Thanks
Just thanks
I have a question..after just losing my Ar900 5mins ago...due to low battery. Is there anyway you can configure your craft in i-nav to automatically RTH once the batteries get to a certain percentage?.. thank you.
no, not yet at least. But something is in the works
Should I enable a compass for airplane if it has a rudder?
Hey I wanted to use inav so bad. I bought a gps module with a compass set it up flashed the firmware set everything up with inav, calibrations, ports, configuration,gps,motor protocol,modes,failsafe, etc only to find out while flying that none of the features (gps rth, pos.hold, alt hold, altitude in osd) will work without a barrometer. No Warnings or any thing good thing I was testing when I activated it, it crashed into the ground There are only 3 flight controllers on the market that have a barrometer and (there is a ton of issues adding a barrometer to a fc)the mamba fc's are Not one of them why not include a message saying no barrometer found. all green checks to the right in inav 2.5 were green Just passing on my experience I guess when I build another one in probably a year I will get to try it that really sucks over a $3 part or rebuild my entire flight controller why not allow us to pick which side is the forward/ the front or even make us calibrate it by flying forward in a straight line for 200 ft or something similar while in calibration and call it a day and use the same programs that planes do. I am tempted to add it as a plane with 4 motors
How do you fix PWM INIT Error not able to arm on OSD INAV on Matek F4ll WSE thks
you could make an explanation video about a x8 7ins multierotor with inav
Great... in 9" quadcopter ... the defaults are good to initiate?
hard to tell. Probably filter cutoff frequencies are too high
I want to update from 2.4 to 2.5 RC1. But the macOS version of Configurator 2.5.0 RC1 is not available...
You think if its a good idea.. To add auto tune for multi-rotors too.. All axises pitch roll throttle.. For stable hold ..
You advice to not using static filters. Are they still enabled by default like 2.4 and earlier versions?
they were never enabled by default. They are still available in the CLI is somebody really want to use them. Still, with new filters there is not much sense to use them at all
Where I can download INAV 2.5? I tried to download but I couldn't
just updated to inav 2.5.2 and telemetry on smartport stoped working
Hello Mr Pawel, I'm trying to set max throttle at 75% on Inav 2.4, can you help me with the correct command on CLI? Thanks
max_throttle
How does a breaking change not bump the version number to 3?
do you know the cli code to remap the motors?
I hope once multirotor will gently brake above the home point during RTL, not like a crazy dog, just like the arducopter (it is very good now)
Why I cant find firmware hex inav 2.5?
Its only configurator 2.5
When I tried to flash with 2.5 there is only 2.4 for the latest firmware
Absolutely epic work, thanks Pawel and team. I've been waiting for this for a long time! Tell me, would we be able to use the gyro for the rover steering for instance, for drift auto correction? I know its not the point of inav, but its a very quick way to get iNav onto almost any RC car, steering stabilisation, steering, throttle and brake Rates.
this is what PID controller does out of the box. Steering goes through PID and if gyro detects rotation it will try to correct. Strength might not be super high but can be tuned
@@FPVUniversity magic, day has been made!
On what FCs does iNAV run on?
when we will have the video with information for rover and boat. im very interested on that.. :D
As soon as my family will go out so I can record in peace. It's kind of problematic in the last few months
@@FPVUniversity ok i understand. thanks for the feedback... :)
Does Inav 2.5 work fine with the f3 flight controllers?
Dear Pawel,
Please may you make a How-to iNav Maiden flight for Fixed-wing video! :)
Good
hi friend i'm new to this rob i'm trying to configure inav 2.5.0 and the htr option is not in flight modes i would like to configure you could help me the controller board is omnibus f4 pro v2
Is the 2.5 configurable through Chrome app? I can't get the executable version of the configurator to run on my PC, only Chrome app version works. Don't know why.
I'm having a similar issue. it has something to do with chrome reading "_" files. i was able to get it downloaded and opened by changing the name of "_config" to "config" but its def not happy and it wont function at all like the configurator should. its all code-y and junk lol. gonna keep pecking away.
inav detect obstacles in quad copter (yes/no)
thanks
IS there an altitude hold and RTH mode in 2.5?
always was
I can’t find it in the modes. Do you know why? Thanks for the quick reply
upgrade to 2.5 if Multirotor...or just use BF?
You will never know if you will not try it...
I just wanna try INAV for toothpick 3", is there any sugestion for setting?
can't help you there. Try defaults and see what will heppen
@@FPVUniversity is it DJI FPV system accomodate on INAV 2.5?
and make video air plane tuning :) and setup, much changes have 2.5 i watch last video and hard to find it still usable instruction in 2.5 from you old 2.x versions videos
I've been waiting to put iNav on my 8in quad with a Mamba F7. It is working now?
Without a barrometer which mamba don't have it cant do anything fun in inav
@@jcfpv3454 Yeah, not a good excuse. You can still do plenty with a GPS module+compass. If its not supported then they should take it off the site and remove it from the configurator.
No Inav Configurator 2.5 for Mac yet ?
final will be distributed for Mac. But for RC it's quite a lot of hassle with signing etc and only one of devs can do it
Pawel, be the force with that dev, then ... :) I can't wait. Thanks what you do for the community.
Hey Paweł, I appreciate your contributions but how about some bullet items. I have no idea where you're going with this discussion. It's meandering and intractable.
Highwaymen you cant fit the complexity of this software in bullet points
Pawel, sorry, spell check kicked in.
I think inav need rth and poshold without compass and baro for quads.
Agreed
Please do next something more visual to explain new futures ... difficult to follow just by explanation for non native
i will try and get it running on linux mint.
anyone already done it ?
Still no smart audio ;(
😂😂😂!!!! S-BUS OUTPUT! !!!! 🤣🤣🤣
matek f405ctr does not work on 2.5 does not work