Молодец, парень! Если взять китайскую подделку jbl, то твоя самоделка по звучанию и качеству сборки, да и по внешнему виду в 100 раз лучше! Ты показал китайцам,как надо делать колонки!
From my old broken speaker its battery was gone it was not charging i used its part to make a speaker it already had 2 small speaker i put 2 big speaker with that small speaker i powered it with a charger when i put it to high volume it always turns of it think it consumung so much power that my adapder dosent handle.I am running it with medium volume but i want to use it on full volume.Any solutions plssss reply
, you just made a $199.00 dollar JBL Bluetooth speaker. great job, now I'm gonna make one and use 4 /8ohm 3 inch full range driver's and it's gonna be a dual tube design also with 4 end cap 3 inch passive radiators. it's gonna be powered by a 15X15 @2 ohms with a 4 ohm load since I'm gonna wire the speakers in " Parallel ". I'm also gonna use a bit more stuffing inside and use spray on bed liner for the outside. thanks for the idea. Parts Express has a good line of full range point source drivers. I may even install theyer new automotive- 2- AMT Tweeters. great clarity. they also make good small mid base drivers. so we will see what type of speakers I go with. maybe catch something on sale and or clearance.
hey know of any other projects within the spheres of bulk assemblies that I can run with to make good margins as well as a bridge into components & products manufacturing (looking for exposure; Iron sharpens Iron)?
Nice idea, unfortunately the bass was weak and the passive membranes did not move much because of the lack of sealant and the amount of air gaps there were not filled properly. Another channel (King Minhvuong) did this as well but theirs sounded better due to the improvements mentioned before.
i think the issue is the polarity is reversed for one woofer. all the long throw bass that is shared by both channels is cancelling out so nothing to hit the passives with. I noticed on the power up pop, seems one went in and one went out. is that possible?
Its good but the inclosiur is also little bit to small use smaller Driver and use Full range Speaker, the Tweeters use a lot of Place for Resonanz for the "woofer" so there are some mistakes but its quiet good!
the passive radiators have no sense, because there is no air to pushing it out. Maybe because of the plastic or the big volume in tge box. But all in is it a good speaker i think👍
Great Job Man! With a "little Cosmetix"... (Old Leatherjacket's Backside gives enough Leather!)... it would look even MORE Pro. But...THAT's a Q of Taste. Is it possible to get a PDF with detailed Instructions??? THAT would be REALLY great, cause i like to do it TOO. Thumbs UP...and, YES (for those Grumblers): Anybody can use a Function's called "MUTE"...if she/he don't like a Background-Music! AGAIN: Grrrrrreat Job Man... ✌🏼😎✌🏼
I built a boombox which is almost same to ur design , mine has three speakers , one for bass , and the other two are full range speaker I kept using it untill now , I am upgrading my boombox , now , it have a treble and a mid low range speaker for each channel , and small subwoofer , I use the same bass radiator with you!
Good try! So close but without a DSP and proper sealing I know this won't sound any good. Also wire up the speakers properly! They are fighting each other which acts like noise cancellation
Everything is ok... beautiful and wonderful work.... except the handle....if there's no handle no one can say it is made by hand...really looks like branded item
Forewarning: Anyone who reads this, It’s not written to be rude, or brash. Thanks Hello, I started watching your video today which I think was pretty good & very interesting, but the 17 minute video I could only watch about 5 of- unfortunately the constant loop of techno reappearing over & over made it hard to focus on the build you were sharing. I understand it’s a popular style of music in many places around the world & appropriate to use as you wish, after all its your video & it has many likes & very few dislikes- excellent work. Readers: I’m aware I don’t have to watch or mute it, but I’m trying to offer fair & honest critique- that would likely bring in more viewers converted to subs. I really liked the info you had to share... just wish there were someone talking about what’s going on, using more subtitles/ text or at least possibly choose background music based on the type of video you make. In this case it would have been easier to focus on the video itself- [for folks like me anyhow] if the music was more mellow or instrumental/ classical etc.. Maybe I’ll figure out a way to get to the end. Best of luck on your future endeavors, good video... cheers!
Hello! Greetings from Russia! Tell me, is this amplifier stereo or mono? It seems to me that if the amplifier is stereo, then it was necessary to separate each channel separately? Don't you think so? It was necessary to make a partition inside the pipe, in the middle of the column.
▶Do you want a video: How to make a WOOD BOOMBOX BLUETOOTH SPEAKER???
yes. as soon as impossible
Yes
X-Creation yesss ! A hexagonal bluetooth speakers
Yes if you can make it in low budget
X-Creation 8
the passive radiators there for no reason! there’s no air seiling and the passive radiators cant move!
i will make a new video to test bass on passive radiators this speaker
He Just need to seal everything
gaming with franky its more of a jbl xtreme copy because it has 2 tweeters.
Dániel Tóth nagyon igaz
Dániel Tóth es nem seiling hanem sealing
Молодец, парень! Если взять китайскую подделку jbl, то твоя самоделка по звучанию и качеству сборки, да и по внешнему виду в 100 раз лучше! Ты показал китайцам,как надо делать колонки!
Super Boxa power bass Like 🖐️🖐️👍👍👍👍👍🤚🤚
From my old broken speaker its battery was gone it was not charging i used its part to make a speaker it already had 2 small speaker i put 2 big speaker with that small speaker i powered it with a charger when i put it to high volume it always turns of it think it consumung so much power that my adapder dosent handle.I am running it with medium volume but i want to use it on full volume.Any solutions plssss reply
I want this video since I was like 9
Wow those powerful mini subs can really push that passive radiator
Awesome video bro very very good job 👍👍👍👍👍👍👍👌👌👌👌👌👌💖💖💖💖💖💖💖
Красавчик!!! Молодец мне бы такую колоночку. Handsome!!! Well done to me such a column
Сделай ))))
Switch the positive and negative terminals of one speaker and install it so that the sound is deep and quality.then passive radiators flex certainly..
Really good creation I liked. Just telling, seal the box for better sound 😊
I want this speaker you made so bad. I'm growing into one of y'all biggest fans....
good attempt indeed, just try making whole thing air seal and then ull feel the real passive radiator.
U used a 3s 20A or 25A bms. Won't that affect the amp board as it's a lot of current
bro,you need to airtite the boombox properly for better performance of the passive radiators.
Thanks for the tip
@@XCreation your welcome bro.
No movements on the passive radiators there might be air slipping out
Or the passive radiators are too heavy
How to charching the battery? where the input,for micros USB or USB?
And your feeling think a good hard bass?
, you just made a $199.00
dollar JBL Bluetooth speaker. great job, now I'm gonna make one and use
4 /8ohm 3 inch full range driver's and it's gonna be a dual tube design also with 4 end cap 3 inch passive radiators. it's gonna be powered by a 15X15 @2 ohms with a 4 ohm load since I'm gonna wire the speakers in " Parallel ".
I'm also gonna use a bit more stuffing inside and use spray on bed liner for the outside.
thanks for the idea.
Parts Express has a good line of full range point source drivers.
I may even install theyer new automotive- 2- AMT Tweeters. great clarity.
they also make good small mid base drivers.
so we will see what type of speakers I go with.
maybe catch something on sale and or clearance.
Nice preview of speakers I love it sometime I make one Bluetooth speaker be like your speaker it's echo
Your very good at this
You should double check the sealing of everything so the passives move more because we don't want any leaking air.
Pix 1ater i think the mic in camera isn't good
ALL, Is that the correct way to wire up a string of batteries? see 8:10. Thanks.
how to know the bettery is full power after charging?
Mantap,sy pngen jg bs bikin speaker sendiri
will these diy speakers be comparable to jbl and quality speakers?
Also, are your batteries rechargable?
Very very very good! 😃
The onyx passive radiators are beautifuls
hey know of any other projects within the spheres of bulk assemblies that I can run with to make good margins as well as a bridge into components & products manufacturing (looking for exposure; Iron sharpens Iron)?
It's your mic or there's no bass ?
yes, i will make a new video to test bass this speaker
there is no bass
Nic
Nice idea, unfortunately the bass was weak and the passive membranes did not move much because of the lack of sealant and the amount of air gaps there were not filled properly.
Another channel (King Minhvuong) did this as well but theirs sounded better due to the improvements mentioned before.
i think the issue is the polarity is reversed for one woofer. all the long throw bass that is shared by both channels is cancelling out so nothing to hit the passives with. I noticed on the power up pop, seems one went in and one went out. is that possible?
looking again, it is polarity reversal. right now you are blasting counteracting pressure waves blowing power to get nothing in bass.
Хорошая поделка и не дорогая. :) будь здоров автор.
I like it 👍👍👍👍
Its good but the inclosiur is also little bit to small use smaller Driver and use Full range Speaker, the Tweeters use a lot of Place for Resonanz for the "woofer" so there are some mistakes but its quiet good!
It looks like the JBL Charge 3! It's amazing!
Are you stupid??? JBL Charge 3 not seems like that plastic pipe
Y tu control remoto cómo funciona ? Si el fototransistor quedó dentro?
Золотые руки!Молодец!
Nhìn thích thật nhưng nghe không ưng nghe thiếu thiếu cái gì đó chưa êm ái mấy hình như thiếu support trét 😼👏👍👍
We love We live We lie
You need to seal it better and the bass radiators should move a lot but there is a leak somewhere other than that it is great
the passive radiators have no sense, because there is no air to pushing it out. Maybe because of the plastic or the big volume in tge box.
But all in is it a good speaker i think👍
Bro. U explained it shit af
Nice you make very difficult make easy
Anh cho em xem hết cách nối ỏe trong được ko em.làm theo mà ko biết đấu dây thế nào tại k thấy ở trong được
battery indicator could be awesome but still love it man great joB ? :))
Great Job Man!
With a "little Cosmetix"... (Old Leatherjacket's Backside gives enough Leather!)... it would look even MORE Pro. But...THAT's a Q of Taste.
Is it possible to get a PDF with detailed Instructions???
THAT would be REALLY great, cause i like to do it TOO.
Thumbs UP...and, YES (for those Grumblers):
Anybody can use a Function's called "MUTE"...if she/he don't like a Background-Music!
AGAIN: Grrrrrreat Job Man...
✌🏼😎✌🏼
I built a boombox which is almost same to ur design , mine has three speakers , one for bass , and the other two are full range speaker
I kept using it untill now , I am upgrading my boombox , now , it have a treble and a mid low range speaker for each channel , and small subwoofer , I use the same bass radiator with you!
Boht badhiya bhaai G
Ye Bluthuth mujhe bhi chahiye.
Kya aap bechte bhi ho kya
Good Job Bro Nice
Which rotary tool do you have?
Most likely, the dynamics are rather weak for such heavy passive speakers, you can not lay cotton when you use passive speakers! Is the handle strong?
Can you do it without the battery protection circuit
the new beats pills is looking great
wow and the battery will also dance
Your build was good but it has a lot of leaks. Try to close every small gaps inside the port, i am sure your sound will improve a lot more. ✌️
thank Max Blade, i will try
For more responsive bass try a TDA7297 amp board.
Instead of bluetooth, id like a usb-dongle player.. can u give me a link to that? Been looking allover, cant find it. Pls
YOU DO IT WELL! CONGRATS!
Its nice work mahn...!!! Could you please send full circuit diagram...?
The passive radiators don't move at all
箱体和被动辐射盆还有功放都没问题，问题在于喇叭是全频的，所以低音并没有发挥出来。
Can I also build the power-on button on top of the thing? I wanted to try to do a case and also waterproof like a JBL box ^^
That's way top quality but bro please can you make something that's good as well as costs less than 100 or 200 rupees
Good try! So close but without a DSP and proper sealing I know this won't sound any good. Also wire up the speakers properly! They are fighting each other which acts like noise cancellation
how much battery power do you have installed? also, how long does it last?
Jó hangszóró lett az ujj JBL Extreme 😅 szép munka fojtasd tovabb mi nézűkk a te munkádat🤘
Everything is ok... beautiful and wonderful work.... except the handle....if there's no handle no one can say it is made by hand...really looks like branded item
wow awesome bro I enjoyed the video
cool idea. and great work!!
Very good job!
Hey if im right, ur box isnt sealed enough, the bass reflex isnt resonating too much when the speakers almost on peak, i think u need to fix it dude
Сколько времени колонка проиграет на полной мощности на таких аккумуляторах?
Exelente aporte quedó muy original
Tem o link do material?
Woaaaa..Verry gòod..i like
I own a dindin brand speaker. Honestly, it's really good. I've been using it for a year so far.
That is really cool. Damn good job. I really like the look of that one.
Nice project. Unfortunately sound experience is terrible, probably because it was recorded with calculator.
Very good 👍
Bro can I use 2 60w speakers plz tell
The major problem in this project is the lacking of sealing! It´'s essencial to get bass
me encanta tus videos saludos
Cool man how did you get those ideas👍👍👍👌👌☺☺☺☺
From my Vietnamese friends!
👌👌👌👍 OSM
Te quedo espectacular el boombox
hello a question, which capacitor should be used for a speaker 10w 4ohms ? :D
Could you let me know the name of song? My toddler loves it!
Its really awesome awesome 👌 👌 👌
Forewarning: Anyone who reads this, It’s not written to be rude, or brash. Thanks
Hello, I started watching your video today which I think was pretty good & very interesting, but the 17 minute video I could only watch about 5 of- unfortunately the constant loop of techno reappearing over & over made it hard to focus on the build you were sharing.
I understand it’s a popular style of music in many places around the world & appropriate to use as you wish, after all its your video & it has many likes & very few dislikes- excellent work.
Readers: I’m aware I don’t have to watch or mute it, but I’m trying to offer fair & honest critique-
that would likely bring in more viewers converted to subs. I really liked the info you had to share... just wish there were someone talking about what’s going on, using more subtitles/ text or at least possibly choose background music based on the type of video you make. In this case it would have been easier to focus on the video itself- [for folks like me anyhow] if the music was more mellow or instrumental/ classical etc.. Maybe I’ll figure out a way to get to the end. Best of luck on your future endeavors, good video... cheers!
Amazing! Great job man.
Stuff that enclosure with wadding or it will continue to sound like the hollow pipe it is. Great idea but poor execution.
thank D twist Rewind
Amooo esse canal sou do Brasil
is the ability to charge this speaker?
Hello! Greetings from Russia! Tell me, is this amplifier stereo or mono? It seems to me that if the amplifier is stereo, then it was necessary to separate each channel separately? Don't you think so? It was necessary to make a partition inside the pipe, in the middle of the column.
this is amplifier stereo and it was not necessary to separate with a partition each channel separately
Gak ono basse mas!! Tapi kreatif joss tenan.
no need to use headphones because this frequency response can be played on every laptop
NICE BOOMBOX
Видишь парень красит в маске значит ролик импортный !😂
Hey i repair my JBL charge 3. Orginal speaker x2 4 ohm 10W. Which offer speaker ?
DO YOU USE THE PVC PIPE WITH ANY LAST SIZE?
nicely done :)