Construction of Diagonal Scale/ Detailed Explanation/ Telugu Class/ Engineering Drawing by Subhodaya
Вставка
- Опубліковано 18 гру 2024
- Construction of Diagonal Scale, Diagonal Scales, Scales chapter, Engineering Drawing, Engineering Graphics, Construction of Scales
Link of My First Song (Christian Song, Written and Sung by me)👇👇👇
• Nakai Orchava / Telugu...
Link of My Second Song (Christian Song, Written and Sung by me)👇👇👇
• 2024 Latest Good Frida...
My Instagram
/ subhodayakanth
Divide a line into equal parts 👇👇
• Inscribe a Polygon in ...
Construction of Scales 👇👇
• Scales in Engineering ...
Construction of Polygons👇👇
• Construction of Polygons
Conic Sections👇👇
• Conic Sections
Projection of Points👇👇
• Projection of Points
Points Shortest Distance 👇👇
• Shortest Distance Prob...
Projection of Straight Lines👇👇
• Projection of straight...
Line inclined to both planes👇👇
• LIne inclined to both ...
Projection of Planes 👇👇
• Projection of Planes
Projection of Solids 👇👇
• PROJECTION OF SOLIDS
3D to 2D 👇👇
• 3D to 2D
2D to 3D👇👇👇
• Orthographic to Isomet...
Thank you sir because of your teaching I cleared My E.G Sub at first attempt.
Car travelled time is 5m30sc , so 30sec is half of min, in that case car will travel 500meters in 30sec right, then measured scale is 5.5km
Super ga chepparu continue cheyyandi ❤️
thank you so much subbu sir ..eroju 13th jntu exam undhu sir eg diagonal sacle 15 marks chala hlp ayindhi sir ...love you sir .
Thank you so much sir.I have passed my exam because of you sir .once again thank you so much sir
Very clean explanation sir Amazing teaching ....
I AM LUCKY TO HAVE A TEACHER LIKE YOU
Sir lucky to have u sir maximum good sirs all are available in only hindi but we are lucky ❤
Excellent sir. thank you.. way of teaching super.
Thank you for your comment
Very fine teaching skill, sir very useful
thankyou so much sir
Your Vedios are very useful for us 😍
Tq so much sir very nice explanation ✨
Thank you sir.
I have written my exam well
Congratulations in advance
Nice explanation sir
Sir thank you so much ❤sir me and my friends are written exam super sir thanks alot sir 🙏🙏🙏🙏🙏🙏🙏🙏
Congratulations
Tq so much sir also complete solids sir 😓 plz sir
Mee videos anni naak baaga help avthunnayi sir exam ki tq tq so so sooooooo much sir .
plzz vernier scale, cycloid, involute kuda explain cheyyandi sir plzzz
i have exam on this 19th july plzz sir its my humble request
its difficult to understand from other channels.
Mind bending teaching sir 🫡
Super ❤️🔥
Vernier scale kuda cheppachu kada sir
Nice explanation sir 👍👍
Super explanation sir
Thank you so much sir
I passed my exam because of uh ❤
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤100000%good teaching
") The distance between two stations by rail is 50 km and it is represented on a
certain map by a 1cm long line. Find the R.F. and construct a diagonal scale
showing single kilometer and long enough to measure upto 700 km. Indicate a
distance of 538 km on this scale." sir u can explain the caluclation of "R.F" and how to draw this.........
Iam really so happy sir ❣️❣️❣️
Super sir tq u so much
Super explanation sir ❤️. After completion of scales solids complete cheseyyandi sir pls
sir please projection of soilds complete chesyandi sir plz
Sir thanks for your wonderful explanation
Meeru free ayyinappudu AUXILIARY PLAINS topic meedha video cheyyandi sir
Pls
We are waiting for isometric views sir please make a video on isometric
Ur explaining well sir 😀
Construct a diagonal scale to read kilometers,hectometers and decameters and long enough to measure upto 6kms. When a line of length 1cm on the map represents a distance of 0.5kms.Calculate the R.F and indicate a distance of 2.45 kms on the scale..........sir ee question ki answer cheppara sir...please sir
Thank you sir 👍
Sir In second diagonal scale 5inches lo 12 parts ela chestharu 10 parts a osthai kadha
Sir konnitiki R.F evvaru kadha vatini Ela cheyalo cheppara
Sir would you mind making a videos on isometric views?
Sir mamaki question lo represent ani evvakapothey adhi represent cheyyali sir
Thank you 🙏 Anna
Super sir
Sir
Maaku semester start avuthundi
So ma kosam preparation gurinchi oka video
Hello sir...base line draw chesaaka box draw cheyyadaniki line 5 ela theeskunnaru..5 kante ekkuva kani thakkuva theeskovacha...
Sc@les lo units rayocha xmalo ?
Sir exam lo ee vidhanga draw cheyocha
Sir , i have an doubt in 3:200 sum , from meters to decimeters we are converted into 10 parts and decimeter to centimetre into 10 parts. Actually i cant understand how we are divided into 10 parts . Please explain it .
Development surface topic video cheyandi sir
Sir! Could you please make a video on Development of surfaces 😢
Sir please make a video on isometric views especially curves please please sir
Please help us sir
Sir can please help me sir I will share your all videos sir devlopment of surface full ga cheppandi sir please date Aina chepandi eppudu chestaro
Sir if possible make a video on Vernier scale , section of solids , development of surfaces .... Within 2 weeks as sem is going to start
Tq sir 🙏☺
Sir thank you so much sir ❣️
Nenu mi valle Engineering drawing exam baga rasanu
Congratulations
Sir mechanics videos chayyanii sir
Incase max value CM lo unte enni parts cheyyali sir
Tq sir
Sir enny problem ki yard first next feet inch rayala sir
Arcs garranty ga kottala sir??
Sir max length 400 km unte Anni parts cheyali
Sir auxiliary views chepandhi sir please plz plz sir🙏🙏🙏
Sir edge inclination chesta ani chyledu nti sir rpu mrng xam undi sir... 😌
Nenu chestha ani cheppaledhu...
Time paduthundhi ani cheppaa.
Ippatlo cheyyalenu
@@Subhodaya yeah sir but i expected ante, jntuh 1-1 rpu drawing last exam undi kada live lo adgam anduke meeru chesta ante exam lopu chestar ankunam sir... Any way mem pass ayyam ante that's all the credit goes to u sir! ❤u a lot sir & we miss u that ur not in our clg..
Development s cheppandi sir
Sir section of solids chappandi sir please
Sir exam lo e scale construct(draw a scale) cheyyandi ani mention cheyakapote.. Appudu a scale geyali sir...
Mana ishtam depending on the type of question
5.5 kadha
Engineering curves chestaru anukunna sir
5:40
60sec=1km then 30sec=1/2km isn't this right.but in problem u did in other way, y so. I hope u will answer me
I did in a lengthy way so as to understand how it is done when round figures are not possible.
In exams we cannot expect direct questions. If in the question he asked 27 seconds then???
Hope you understood
@@Subhodaya Ho it's OK👍
Sir, please First video 📹 link pettandi
Check description for link
If he tells, it measures upto 25 km in the question then we should cut the line into 25 parts or not and he asked to show 17.5 km this is in the diagonal scales
The number of parts may vary depending on the question. We can divide it into 25 parts(waste of time in this cas) or else we can divide it into 10 parts which means each part is 2.5Km (25/10=2.5).
Now to represent 17.5Km we need to mark 7th part which is obviously 17.5Km (as we made 10 parts each part is 2.5Km so 7x2.5=17.5)
Hope you understood
sir e sum lo 1st part ni 10equalparts cheyadam ravatledhu sir...adhi meru to divide line into equal parts cheyamanaru kadha adhi baseline ni divide chestam kadha 1st part ni aela divide cheyali ardamkavatledhu...plz answer cheyandi 1 week lo drawing exam undhi sir...plz cheppandi
First part kuda same alaney cheyyali divide a line into equal parts laga
@@Subhodaya 1st part ni kuda alane cheste ravadam ledhu
@@Subhodaya actual ga baseline ni nenu 45degree peti ah tarwatha arcs aemo 1cm kani 0.5cm tho gani gistuna Ede same 1st part ki apply cheste 10 parts ravu Kadha sir plz Koncham clear ga chepandi
Divide a line into equal parts 👇👇
ua-cam.com/video/sbzoLwWfGFw/v-deo.html
From Vasavi engineering college sir
Sir diagonal scale ki 3cm ani cheparu
Sir, when will you return to the isometric sir? So many have been waiting since your last video of isometric sir. We are craving to know the curves in isometric sir. Would you mind making the videos of both videos of scales and isometric views? You completed some part in scales and now could you possibly make a video on the isometric views and then you could make a video on scales again sir. I don't want to know about scales now but I'm asking to make a video because so many have been asking you to make the videos on scales that is the reason I asked to make a video on scales along with isometric view sir. I hope a new video will be uploaded by tonight or tomorrow on the isometric view sir
No sorry. I can't do that topic now
@@Subhodaya then when will you start the isometric view sir?
@@potnuruleelarani9335 I can't confirm and i will not be coming back to this topic that soon. I have many topics to discuss in pending
@@Subhodaya sir but you said that you will make a video on isometric view after completion of the scales
I'm also waiting for that
Sir car distance problem lo scale lo left side and right side lo em measurement teeskovali?
(right side km and left side minutes teeskovala sir? And 5.48 km answer ni ela chupettali scale paina)
Plzz reply ivvandi sir on july 19th is my exam.
Hope u reply me.
Kilometres, Hectometer, Decameter
@@Subhodaya thank u so much sir.
2020 question paper lo
Consrtuct a plain scale to time up to 1 minute ani adigadu sir
2019 paper lo construct diagnol scale show upto 1minute and 1 kilometre ani adigadu.
Ilanti prblms lo em dimensions teeskovalo and how to solve it
konchem cheppandi sir plzzz...
@@Subhodaya sir reply me sir plzzz
ah 2 questions ki answers cheppandi sir plzzz...
Tensed about it
Sir Mee valle nenu ED exam pass ayya Chala Thanks Sir ❤
''''' ʟᴇᴛ's ᴘʀᴀʏs ғᴏʀ ᴛʜᴏsᴇ ᴄʜɪʟᴅʀᴇɴ ᴡʜᴏ ᴅᴏᴇsɴ'ᴛ ʜᴀᴠᴇ ᴛʜᴇɪʀ ᴘᴀʀᴇɴᴛs ᴛʜᴇʏ ᴀʀᴇ ʀᴇᴀʟ ʟᴇɢᴇɴᴅ """""''''' 💖❤️🧡💛💚💙💜🤎🖤🤍♥️💘💝💗💓💞💕❣️
Sir conversation chapandi sir
Introduction video lo already explain chesa. Description lo link untaadhi chudandi
Sir
😭
Iam dawing. Fail
Sir meru wrong chesar
Could you please elaborate. Ekkada wrong anedhi konchem cheppagalara
Mee teaching very 😞😞😞😞 bad
Thank you for the feedback. Will surely improve
Super explanation sir
Tq sir
Thank you sir
Thank you sir