i have a test tommorow morning, i could have spet whole night trying to get my head wraped around this but after watching your video and a little bit of practice i can say with ease i will pass and its all thanks too you
I have understood it better than what I was trt,,now I can face that knec exam with confidence..I came vile ita came..kitu ndechu ndaksi😊👊one love engineers.
Nice wouldn't of have thought of that myself. Believe it or not I was trying to dimension a hex head (not even a bolt size) based on the distance across the flats, couldn't figure it out with a CAD software. Thanks a lot.
After dropping the sides of the bolt, how did you come up with that horizontal line? You just said, now we gonna draw a line here to show the top of the bolt.....
Sir i have seen other different formula for this nut and bolt construction....I am confused...is there anyway i can reach out to you to ask and show you these other formula
Hi there. The thread is indicated by the two lines going down the side of the bolt shaft. It is the 0.1 times the M value that gives you the thread depth.
Everytime I study for the nut and bolt since grade 8 I’ve came here. This is the best explanation on any platform.
You sir,are a life saver
Truly he is
Only a pleasure. Let me know if there are other videos that would help
@@anthonysparrow914
I love you nigga
i have a test tommorow morning, i could have spet whole night trying to get my head wraped around this but after watching your video and a little bit of practice i can say with ease i will pass and its all thanks too you
Very glad to hear I could be of help
@@anthonysparrow914 you sure did and thank you again
@@maikrajncic5309 ngl I was expecting you to not pass lool
me too 😭
You explained it very well sir, thank you so much 😊
Thank you so much for the help!
This really helped! Thank you so much
Thx so much i was really confused but now i get it😁
Thank you so much ! This is extremely helpful
Wow nobody taught me these calculations... Thanks sir
Professional, your work is professional. Thank you, Professor ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
I have understood it better than what I was trt,,now I can face that knec exam with confidence..I came vile ita came..kitu ndechu ndaksi😊👊one love engineers.
Kwani we niwa tti😂
I definitely like it sir ...thank you so much ...especially for making it not too complicated.
I'm not even in school anymore but I am working on a cad model and forgot how to determine the size of a m13 bolt head. Thank you for this video!!!
Very useful knowledge, thanks for the tutorial.
Tomorrow I have an exam in engineering drawing.you helped me a lot thank you so much,sir
You are the best 🌺🌺🌺🌺
Thank you so much!❤
Very nice, thank you!
Very helpful!
you are a great help sir, thank you very much
Nice wouldn't of have thought of that myself. Believe it or not I was trying to dimension a hex head (not even a bolt size) based on the distance across the flats, couldn't figure it out with a CAD software. Thanks a lot.
Glad to hear it was helpful
TEACHER YOU ARE GREATTTTT , PERFECTTTTT good to see you 😅😅😅👌👌👌👌👌🥹
thank you for the sharing
Thank you so much 🙏🏼❤️
Thank You Sir! 💚💚
GREAT WORK
Thank you for the help sir
Legend!!
Thank you, sir.
God bless you always sir.
It's been a nice lesson
love it sir
About to go write my engineering drawing exam this morning. Wish me luck😢
All the best dude
Thanks sir,you are too much better than my teacher
thank you
Thank you sir.
Ive got to watch this more cause I've got cxc next month
Do I multiply all given M with 1.5 and 0.7
Thank you so much.... The frustration when the needle slips😭😭😭😭
thanks man
Thank you so much sir 😊i finally understand 🙏 🙌🏻 😭
Thank you sir
For Impacting 😍
Is this the first angle projection or third angle projection
How do I draw the nut and washer? Any video for that?
You my hero
A legend ♥️♥️
After dropping the sides of the bolt, how did you come up with that horizontal line? You just said, now we gonna draw a line here to show the top of the bolt.....
Thanks man
Thank you very much sir😊
Thanks a lot helped for my exams ❤
Thanks yo
Cool !!!
I was wondering how to do tangents in autocad for the top view and head of the bolt.Anyone know how?
THANK YOU
Quality explaining
Respect
muchas gracias capo
Thank you sir
Life saver
Sir i have seen other different formula for this nut and bolt construction....I am confused...is there anyway i can reach out to you to ask and show you these other formula
Superb
From where get the pensel.
Thanks
Thanks ❤❤
Sir please do tuitorials using reads marine engineering drawing book
Hello
Please I want to register my TD app but your country code can not be replaced I'm a Ugandan with country code+256 please help me
Sir can you please do mechanical assembly
Sir why didn't you draw the threading
Why don't we make the threads seen or draw them
LIFE SAVER 😭😭😭
Waooooooo
شكراً جزيلاً
ممين نتا
are these calculation a standard formula?
Yes. 👌🏻
thnq sir
Wooow i have an exam Tomorrow atleast i have confidence
🤍💯Can you please do a video drawing a square bolt and thanks.
Thanks, tomorrow i m sure to pass
Thank you again
This happens to the most of us 14:02
hello sir i have an assignment of engineering design element which is due on wednesday 16 march can you make it i will pay the charges
24:30
Thank you , you helped a lot✨. I couldn’t help but notice your hands tremble a lot, are you ok?
Your fingers my guys
Wheres thread?
Hi there. The thread is indicated by the two lines going down the side of the bolt shaft. It is the 0.1 times the M value that gives you the thread depth.
Ys
13:47 “slips”
i thought he did it on purpose before he said it slipped cause he was doing it so well up until that slip.
Bro's fingernail looks like it return for hell (13:24)
wish i saw this video about 3½months agotht i would've done better in my exam
How quaint - 25mins to explain something that takes 2minutes in Autocad
God bless you always sir.
Thanks so much sir
thank you sir
Thank you sir
Thank you sir