Hi, great video, I had already completed this, however because of the memory function I’m limited to 1 sec bursts. You skimmed over the wiring which was disappointing. It would have been great to see how you wired them to the switches. Great video tho.
How did you connect the wires for every motor?Have you got a diagram to which wire goes where on those buttons, as there are 5 wires from the button and only 2 coming out from the motors? Thx
So on the switches you have the connect the motor wires to pin 1 and 5 and then 2 and 4 are negatives and 3 is live. It means it will alternate which way the current gos, either one side of the motor or the other enabling the motor to go in either direction. Hope this helps
Hi, great video, I had already completed this, however because of the memory function I’m limited to 1 sec bursts. You skimmed over the wiring which was disappointing. It would have been great to see how you wired them to the switches. Great video tho.
How did you connect the wires for every motor?Have you got a diagram to which wire goes where on those buttons, as there are 5 wires from the button and only 2 coming out from the motors? Thx
So on the switches you have the connect the motor wires to pin 1 and 5 and then 2 and 4 are negatives and 3 is live. It means it will alternate which way the current gos, either one side of the motor or the other enabling the motor to go in either direction. Hope this helps
Thanks for the video. It looks like you have an older version of the sprinter. Would it still work on a 2020 sprinter?
Yes would work on any vehicle. As it’s just a 12v supply. And generic base. Works well. 👍
Hi, do you have a link for the switches, ive not seen them with tbe connectors which look really handy!
www.ebay.co.uk/itm/364293069023?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ambmp08xtuo&sssrc=4429486&ssuid=Dw47bs9CQpe&var=&widget_ver=artemis&media=COPY
These are what I used
@@ADHDbuilds brilliant thank you!